Prabin Pathak has a total of 10 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Impact of Water Level Variation on Mechanical Properties of Porous Concrete

    by Rabin Lamichhane, Gokarna Bahadur Motra, Thaman Bahadur Khadka, Y. X. Zhang, Prabin Pathak, Shikhar Pandit

    This paper investigates porous concrete and the influence of water level variations and porosity on the mechanical, physical, and hydraulic properties of porous concrete. The effect of different void percentages and various water levels on the properties of porous concrete was studied. Fabricated specimens with targeted porosities of 20% and 25% were subjected to a series of tests to evaluate their compressive strength, hydraulic conductivity (permeability), and porosity. The permeability of the specimens was assessed using a falling head permeameter to ensure effective water percolation. Porosity was quantified through a volumetric method, providing insights into void content. Both cubical and cylindrical specimens were used for all tests, along with compression tests under both air-dried and oven-dried conditions. The results showed that the maximum compressive strength occurred under oven-dried conditions for both cubical (7.05 MPa, 5.58 MPa) and cylindrical (8.36 MPa, 4.81 MPa) specimens, with 20% and 25% porosities, respectively. The compressive strength was found to be low in air-dried samples and increased with higher water levels, peaking at the 40% water level. Furthermore, the porosity exhibited a significant correlation with the reduction in density, affecting the mechanical properties. For the cylindrical and cubical samples, the dry density decreased by 16.03 kg/m3 and 20.85 kg/m3 and the permeability increased by 0.41 mm/s and 0.84 mm/s, respectively, for every 1% increase in porosity. The results showcased the effect of water level variation on porous concrete properties as well as its promising ability to infiltrate water. This promotes the development of sustainable pavement systems by minimizing surface runoff and aiding groundwater recharge.


  • Finite element analysis of beams

    by Xiaoshan Lin, Y.X. Zhang, Prabin Pathak


  • Numerical study of structural behavior of fiber‐reinforced polymer‐strengthened reinforced concrete beams with bond‐slip effect under cyclic loading

    by Prabin Pathak, Y. X. Zhang

    Two simple finite element models denoted as FEM‐B and FEM‐BC are developed in this paper to investigate the structural behavior of fiber‐reinforced polymer (FRP) strengthened reinforced concrete (RC) beams under static and cyclic loading. First, the FEM‐B is developed for analysis of FRP‐strengthened RC beams under static loading and the bond‐slip effect between FRP, adhesive and concrete is included. Then FEM‐BC is developed based on FEM‐B for analysis of structural behavior of FRP‐strengthened RC beams under cyclic loading, and degradations of material properties of concrete, steel reinforcement, and FRP due to cyclic loading are taken into account. The developed FEMs are validated against experimental results and demonstrated to be effective for structural analysis of FRP‐strengthened RC beams. Furthermore, parametric studies are carried out to learn the effects of types, thickness, and length of FRP on the structural behavior of FRP‐strengthened RC beams based on the FEM‐BC model. The research findings are summarized finally.


  • Nonlinear finite element analyses of fiber‐reinforced polymer‐strengthened steel‐reinforced concrete beams under cyclic loading

    by Prabin Pathak, Y. X. Zhang

    A new finite element model is developed for nonlinear finite element analyses of structural behavior of fiber‐reinforced polymer (FRP)‐strengthened steel‐reinforced concrete (RC) beams under cyclic loading in this paper. All the components of the beam, including concrete, steel rebar, FRP sheet, adhesive, and shear strengthening stirrups, are included in the model. Material nonlinear properties of concrete and steel rebars are accounted for, while the FRP and adhesive are considered to be linearly elastic until rupture. The degradation of each material under cyclic loading is considered and defined using the user‐programmable features in ANSYS. The developed finite element model is validated against experimental results, and demonstrated to be effective for structural analyses of FRP‐strengthened RC beams under cyclic loading. Furthermore, parametric studies are carried out to learn the effects of types, thickness, and length of FRP on the structural behavior of FRP‐strengthened RC beams based on the new model. Research findings are summarized finally.


  • Nonlinear Finite Element Analysis of FRP Strengthened RC Beams with Bond-Slip Effect

    by Prabin Pathak, Y. X. Zhang, Xiaodan Teng

    This paper investigates the structural behavior of fiber reinforced polymer (FRP) strengthened reinforced concrete (RC) beams by developing a new simple, efficient and accurate finite element model (FEM-B). In addition to the FRP, concrete and steel rebars, the adhesive and stirrups which have been generally ignored in the reported models from literatures are considered in the new models. At first, a finite element model (FEM-P) is developed assuming perfect bond between concrete, FRP and adhesive interfaces. Then the FEM-P model is expanded to form the FEM-B model by including the bond-slip effect between concrete, FRP and adhesive interfaces. The developed new finite element models (FEM-B and FEM-P) are validated against experimental results and demonstrate to be effective for the structural analysis of FRP strengthened RC beams. Furthermore, parametric studies are carried out to learn the effects of types and thickness of FRP on the structural behavior of FRP strengthened RC beams based on the FEM-B model. The research findings are summarized finally.


  • Finite Element Simulation for Nonlinear Finite Element Analysis of FRP Strengthened RC Beams with Bond-Slip Effect

    by Prabin Pathak, Yi Xia Zhang

    A new simple, efficient and accurate finite element model denoted as FEM-B is developed for the analysis of structural behavior of FRP strengthened RC beams with bond-slip effect. Geometric nonlinearity and material nonlinear properties of concrete and steel rebar are accounted for this model. Concrete, steel, FRP and adhesive are modelled as Solid 65, Link 180, Shell181 and Solid 45 respectively. Concrete is modelled using Nitereka and Neal’s model for compression, isotropic and linear elastic model before cracking for tension and strength gradually reduces to zero after cracking, whereas steel is assumed to be elastic perfectly plastic material. The material of FRP is considered to be linearly elastic until rupture, and adhesive is assumed to be linearly elastic. The bond slip between concrete, adhesive and FRP is based on the bilinear law, which is modelled using spring element Combin 39.The developed new finite element model FEM-B is validated against experimental results, and demonstrates to be effective for the structural analysis of FRP strengthened RC beams.