ZQZhaohui Qian

Zhaohui Qian

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Zhaohui Qian has a total of 23 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • The enstrophy dissipation in the cavitating flow based on the proper orthogonal decomposition

    by An Yu, Wenjin Feng, Zhaohui Qian, Daqing Zhou

    This study employs the large eddy simulation method to investigate the intricate interplay between the vortex and entropy production in the cavitating flow. Results indicate that the instantaneous total entropy production loss is essentially induced by local enstrophy dissipation of the local vortex structures. The derived Enstrophy term of entropy production rate can be regarded as the simplified entropy production rate (EPR) formula. Analysis of the generation and transportation of enstrophy further reveals the high-value regions of each term of enstrophy mainly concentrated at the vapor–liquid interface, reflecting the influence of the instability of cavities on the formation and dissipation of vortex structures. Based on the simplified EPR formula, the proper orthogonal decomposition (POD) approach is utilized to obtain the coherent structures that dominate the enstrophy dissipation scales in the cavitating flow. The findings reveal that the first four dominant POD modes account for 95.8% of the modal enstrophy dissipation of EPR, and mode 2 captured the large-scale shedding structures at the trailing edge. The frequency of mode 2 and mode 3 approximates the cavity shedding frequency. Additionally, the interaction between the mode enstrophy dissipation of EPR and mode vortex structures is expounded that the magnitude of energy dissipation of EPR carried by mode vortex structures attenuate and the spatial scales of structures decrease with the orders of mode increase. Furthermore, POD reduction technology constructs 95.8% and 99.1% of the original total enstrophy dissipation of EPR, which well resolved the variation of the enstrophy dissipation concentrated at the instability cavity interface and the end of the cavity while eliminating the effect of the small-scale structures with an acceptable accuracy effectively. This study provides a valuable understanding of the coupling mechanism between modal entropy generation and vortex structures of different modal scales in the cavitating flow.

  • Effect of leading-edge cavitation of a hydrofoil on the near-field sound pressure

    by Zhaohui Qian, Yongshun Zeng, Zhifeng Yao, Qin Wu, Xianwu Luo

    Leading-edge (LE) cavitation of a blade is a frequent occurrence in hydraulic machinery during off-design operation, often accompanied by unsteady flow and high-amplitude noise. To quantitatively assess the noise caused by cavitation, the Powell vortex sound theory was refined to consider the non-uniform distribution of sound speed and the compressibility effect resulting from mass transfer near the vapor–liquid interface. This led to the development of a new model capable of visualizing the spatiotemporal distribution of sound pressure in cavitating flows. Unsteady simulations were conducted on a hydrofoil at various cavitation numbers and were validated using experimental data. Three different types of sound sources were identified: unbalanced vortex force, non-uniform kinetic energy, and compressibility effect, with the compressibility effect being the dominant source under LE cavitation conditions. The sound pressure during cavitation exhibited dramatic fluctuations over time and was closely related to the spatial position, particularly peaking during the transient moments of LE cavitation break-off, with the highest sound pressure observed near the vapor–liquid interface. There was a strong correlation between sound pressure and vapor volume fraction, suggesting that cavitation noise is a result of the dynamic evolution of cavitation. As the cavitation number decreased from 2.02 to 1.04, the sound pressure level substantially increased, with an increment of up to 17 dB. This paper presents a method for simulating and visualizing near-field sound pressure considering cavitation, providing valuable insights into the relationship between LE cavitation and sound pressure levels.


  • A hybrid scale model proposed for blood flow analysis in membrane oxygenators

    by Meng Jian, Zhaohui Qian, Yongshun Zeng, Mingkui Zhang, Zhonghua Xu, Xianwu Luo

    In this study, a hybrid scale model based on the micro-continuum approach is proposed to realize the efficient and accurate assessment of the static-state incompressible laminar blood flow dynamics in membrane oxygenators with Reynolds number (Re) ranging from 0.6 to 20. The calibrated Ergun equation is adopted to refine the modeling of the sub-grid momentum exchange term between the sub-resolution fluid and solid interface in the volume-averaging momentum conservation equation. Furthermore, an adaptive mesh strategy is utilized to enhance computational efficiency. For comparison, the pore, the Darcy, and the hybrid scale models based on the improved method are applied to simulate the blood flow in a two-dimensional benchmark oxygenator from the literature. The results show that the relative error of pressure difference in the oxygenator between the numerical and the experimental results is the smallest, i.e., 2.46% for the pore scale model, is 6.29% for the hybrid scale model, and has the largest value of 18.90% for the Darcy scale model. Furthermore, the hybrid scale model predicts similar results of the blood velocity and scalar shear stress with the pore scale model, while the Darcy scale model shows significant discrepancies, indicating the Darcy scale model cannot predict the reasonable flow dynamics and hemodynamic performance of the oxygenators. Notably, the hybrid scale model requires much less element number and computational time compared to the pore scale model under the same computation condition. Thus, the hybrid scale model is a promising method for treating the complicated blood flow in actual membrane oxygenators.


  • On cavitation caused by tip clearance of a flat-plate hydrofoil

    by Huan Han, Da Geng, Zhaohui Qian, Zibo Ren, Zhigang Zuo, Shuhong Liu

    This research integrates experimental visualization via high-speed photography with numerical simulations, leveraging large eddy simulation and the Schnerr–Sauer (S-S) cavitation model, to examine cavitation dynamics on a flat-plate hydrofoil across a range of tip clearance settings. We identify three distinct cavitation patterns caused by tip clearance (CT) in terms of the flow structures and interactions of tip leakage vortex cavitation, tip separation vortex cavitation (TSVC), and shear layer cavitation. The flat-plate hydrofoil demonstrates stronger TSVC and more pronounced vortex interactions compared to National Advisory Committee for Aeronautics 0009 hydrofoils. A phase diagram is established to predict the cavitation patterns of CT under different operational conditions of the cavitation number σ and the angle of attack α. We also observe a downwash effect from the vortices, influencing the cavitation length on the suction side of the hydrofoil. The findings are significant for optimizing hydrofoil designs in fluid machinery where effective cavitation management is critical.


  • Universal law for identifying the singing vortex

    by Zhaohui Qian, Huan Han, Yongshun Zeng, Xiaoxing Peng, Xianwu Luo


  • The best whistler: A cavitating tip vortex

    by Zhaohui Qian, Weixiang Ye, Yongshun Zeng, Xiaoxing Peng, Xianwu Luo

    The discrete tone radiated from a cavitating tip vortex, known as “vortex singing,” was first recognized in 1989, but its sound generation mechanism has remained a mystery for over 30 years. In this Letter, by means of the correction for the cavitation bubble dynamics and the dispersion relation of cavity interfacial waves, we found that after the far-end disturbances propagate upstream, the whistling vortex should be triggered by near-end sound sources, the breathing mode waves. Further utilizing the theoretical solutions for singing lines and the potential singing cavitation number with frequency, we accurately identified all available tests for seeking the vortex singing over the past three decades, which not only demonstrates that the vortex singing frequency is only determined by the measurable mean cavity radius (rc), cavitation number (σ), and desinent cavitation number (σd) in experiments, but also responses to a long-standing perplexity: why such a best whistler is able to appear only within a narrow range of the cavitation number.


  • Research on pressure pulsation characteristics of a pump-turbine in pump mode with rotating stall: Focus on the broadband frequency

    by Yongshun Zeng, Zhaohui Qian, Weixiang Ye, Chen Geng, Xianwu Luo

    To investigate the adverse effects of rotating stalls on the pressure pulsation characteristics of a pump-turbine in pump mode, an unsteady numerical simulation was carried out by applying the partially averaged Navier–Stokes turbulence model. The numerical methods were carefully verified, and the onset flow rate of the hump at the performance curve and heads were in good agreement with the experimental data. The rotating stall appeared in the guide vane when the flow rate ranged from 0.514 to 0.887 times the best efficiency point (QBEP), with a frequency of 11.7% times the rotational frequency. In the period of a rotating stall, a sudden intensive pressure pulsation in the guide vane channel was observed and named as the component of the broadband frequency, and its corresponding flow mechanism was explained as the vortex evolution between the adjacent guide vane blades based on the dynamic mode decomposition technology. There were three distinct characteristics of broadband frequency: (i) intermittent occurrence when the rotating stall cell propagated to the current flow channel, (ii) a wide range of the frequency varying with flow rate, (iii) a considerable amplitude, e.g., reaching 21.1%–42.2% times that of the rotating stall frequency. In addition, both the frequency range and amplitude of the broadband frequency gradually decreased as the flow rate increased to 0.887QBEP. This study clarified the internal flow mechanism and frequency behaviors of a sudden intensive pressure pulsation if a rotating stall occurred, which was important to assess the stability of pump-turbine units.