Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Juan David Velásquez-Gómez has a total of 19 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Optimal Location and Sizing of BESS Systems with Inertia Emulation to Improve Frequency Stability in Low-Inertia Electrical Systems

    by Jorge W. Gonzalez-Sanchez, Jose Aparicio-Ruidiaz, Santiago Bustamante-Mesa, Juan D. Velásquez-Gómez

    Traditionally, the dynamics of power systems have been governed by synchronous generators and their associated rotating masses. However, with the increasing penetration of renewable generation and power electronic interfaces, the inertia contributed by rotating machines has been gradually displaced. This makes it imperative to study alternative elements capable of mitigating the reduction in inertia in modern power systems. This article addresses the problem of optimal sizing and placement of Battery Energy Storage Systems to enhance frequency response in power grids through the application of optimization techniques such as Genetic Algorithms (GA) and Particle Swarm Optimization (PSO). Several inertia scenarios are analyzed, where the algorithms determine the optimal locations for Battery Energy Storage Systems units while minimizing the total installed Battery Energy Storage Systems capacity. As key contributions, this study models Battery Energy Storage Systems units, which emulate inertial responses based on the system’s Rate of Change of Frequency, and evaluates the impact of Battery Energy Storage Systems on frequency stability by analyzing parameters such as the frequency nadir, zenith, and steady-state frequency according to the installed Battery Energy Storage System’s size and location. A comparative analysis of the optimization scenarios shows that the Particle Swarm Optimization algorithm with 50% rotational inertia is the most efficient, requiring the lowest total installed power (277.11 MW). It is followed by the Particle Swarm Optimization algorithm with 100% rotational inertia (285.79 MW) and Genetic Algorithms with 50% rotational inertia (285.57 MW). In contrast, Genetic Algorithms with 25% rotational inertia demand the highest total installed Battery Energy Storage Systems power (307.44 MW), a result directly associated with a significant reduction in system inertia. Overall, an inverse relationship is observed between the available inertia level and the required Battery Energy Storage Systems capacity: the lower the inertia, the greater the power that the Battery Energy Storage Systems must supply to keep the system frequency within acceptable operational limits.


  • Open Access

    An IoV-Based Real-Time Telemetry and Monitoring System for Electric Racing Vehicles: Design, Implementation, and Field Validation

    by Andrés Pérez-González, Arley F. Villa-Salazar, Ingry N. Gomez-Miranda, Juan D. Velásquez-Gómez, Andres F. Romero-Maya, Álvaro Jaramillo-Duque

    The rapid development of Intelligent Connected Vehicles (ICVs) and the Internet of Vehicles (IoV) has paved the way for new real-time monitoring and control systems. However, most existing telemetry solutions remain limited by high costs, reliance on cellular networks, lack of modularity, and insufficient field validation in competitive scenarios. To address this gap, this study presents the design, implementation, and real-world validation of a low-cost telemetry platform for electric race vehicles. The system integrates an ESP32-based data acquisition unit, LoRaWAN long-range communication, and real-time visualization via Node-RED on a Raspberry Pi gateway. The platform supports multiple sensors (voltage, current, temperature, Global Positioning System (GPS), speed) and uses a FreeRTOS multi-core architecture for efficient task distribution and consistent data sampling. Field testing was conducted during Colombia’s 2024 National Electric Drive Vehicle Competition (CNVTE), under actual race conditions. The telemetry system achieved sensor accuracy exceeding 95%, stable LoRa transmission with low latency, and consistent performance throughout the competition. Notably, teams using the system reported up to 12% improvements in energy efficiency compared to baseline trials, confirming the system’s technical feasibility and operational impact under real race conditions. This work contributes to the advancement of IoV research by providing a modular, replicable, and cost-effective telemetry architecture, field-validated for use in high-performance electric vehicles. The architecture generalizes to urban e-mobility fleets for energy-aware routing, predictive maintenance, and safety monitoring.


  • Open Access

    Enhancing Multi-Objective Performance: Optimizing the Efficiency of an Electric Racing Vehicle

    by Ingry N. Gomez-Miranda, Arley. F. Villa-Salazar, Andrés Pérez-González, Andres. F. Romero-Maya, Juan. D. Velásquez-Gómez, Elkin. M. Gonzalez, Sergio Estrada

    The multi-objective optimization of an electric prototype racing vehicle is addressed in this study. The goal was to identify the optimal combination of battery type, pilot weight, and power mode to maximize operational time and distance while minimizing energy consumption. A structured 2×3×3 factorial design was implemented, and the resulting data were analyzed through Response Surface Methodology (RSM) in combination with the Desirability Function Approach (DFA). The experimental design included two battery configurations, three weight levels, and three power settings, while data acquisition was performed through a custom Arduino-based system validated against commercial instruments. The results revealed that the configuration with the smallest battery, the lowest weight (66 kg), and the lowest power mode (N5) achieved the most efficient performance, yielding an operating time of 1.12 h, a travel distance of 24.63 km, and an energy performance index of 2.90 km/Ah. The integration of RSM with DFA provided a robust framework for identifying optimal multiparameter conditions under competition constraints. Unlike previous studies that examined these variables in isolation, this work advances the state of the art by demonstrating the feasibility of multiparameter optimization in real-world racing contexts, offering methodological and practical insights for sustainable electric mobility.


  • Open Access

    An IoV-Based Real-Time Telemetry and Monitoring System for Electric Racing Vehicles: Design, Implementation, and Field Validation

    by Andrés Pérez-Gonzalez, A.F. Villa-Salazar, I. N. Gomez-Miranda, J. D. Velásquez-Gómez, A. F. Romero-Maya

    The rapid development of Intelligent Connected Vehicles (ICVs) and the Internet of Vehicles (IoV) has paved the way for new real-time monitoring and control systems. This study presents the design, implementation, and validation of a telemetry solution applied to electric race vehicles, integrating ESP32-based data acquisition with LoRaWAN communication and real-time visualization via Node-RED. The system was deployed and tested in Colombia’s National Electric Drive Vehicle Competition, demonstrating high sensor accuracy (>95\%), low transmission latency, and robustness under real-world racing conditions. Results revealed a 12\% improvement in energy efficiency compared to previous competitions, highlighting the system’s potential for enhancing driving strategies. This implementation contributes to the advancement of IoV technologies in high-performance electric vehicles, offering a scalable architecture for intelligent transportation systems.


  • Open Access

    Enhancing Multi-Objective Performance: Optimizing the Efficiency of an Electric Racing Vehicle

    by I. N. Gomez-Miranda, A.F. Villa-Salazar, A. F. Romero-Maya, J. D. Velásquez-Gómez, Andrés Pérez-González, E. M. Gonzalez, Sergio Estrada

    This study addresses the multi-objective optimization of an electric racing vehicle’s performance by identifying the optimal combination of battery type, pilot weight, and power mode to maximize travel time and distance while minimizing energy consumption. A sequential methodology integrating Response Surface Methodology (RSM) and the Desirability Function Approach (DFA) was applied using a 2×3×3 factorial experimental design. Performance data were collected through a custom Arduino-based acquisition system and analyzed using first- and second-order models. Results showed that the configuration comprising the smallest battery (1.0), the lowest weight (66 kg), and the lowest power mode (N5) produced the best overall performance, with a maximum operational time of 1.12 h, a travel distance of 24.63 km, and an energy efficiency of 2.90 km/Ah. The statistical models demonstrated strong explanatory power, with adjusted R² values above 0.83 and global p-values below 0.01. Both individual response optimization and global desirability analysis converged on the same optimal settings, validating the robustness of the methodology. The findings offer a replicable framework for optimizing high-efficiency electric vehicles and contribute to the broader development of sustainable transportation technologies.


  • Open Access

    Complex Remote Sensing Analysis of Fire Precursors in the Tropical Region: Case Study

    by Jose Daniel Hoyos, Gustavo Suárez, Juan David Velásquez, Jairo J. Pérez, Julio Pastor Restrepo

    Wildfires pose significant threats to tropical ecosystems, yet, fire precursors in these regions are not well understood. This study conducts a statistical analysis of fire precursors in the tropical area of Antioquia, Colombia, using remote sensing data from VIIRS and MODIS satellites. We integrated and pre-processed data on fire occurrences, the Enhanced Vegetation Index (EVI), land classifications, and various weather and soil variables to ensure compatibility for statistical analysis. Our findings reveal that reductions in EVI by 3.9% and relative humidity by 21%, coupled with increases in air temperature by 4.9 °C, soil temperature by 2.77 °C, and wind speed by 0.17 m/s, are significant precursors to fire occurrences in this tropical region. Notably, precipitation and soil moisture did not show definitive correlations with fire events, contrasting with findings in temperate regions. Spatial and temporal analyses indicate that fires are more frequent during the first three months of the year and tend to recur in specific areas, suggesting persistent environmental risks and human influences, particularly in built-up areas. The limitations of the study include reliance on a single land classification dataset from 2020, which may not account for land cover changes over the study period, and the coarse temporal resolution of EVI data that could overlook rapid vegetation changes. Despite these limitations, the results provide valuable insights for enhancing early warning systems, informing policy development, and improving resource allocation for fire risk management in tropical ecosystems.


  • Open Access

    Sustainable energy solutions in Colombia based on isolated DC microgrids

    by Joseph Camilo Sosapanta-Salas, Carlos David Zuluaga-Ríos, Sergio D. Saldarriaga-Zuluaga, Juan David Velásquez-Gómez

    Nowadays the world’s energy transition is transforming the paradigm of how power systems are being developed. This is causing new alternative systems to be included into these power grids. One of these alternatives is the DC microgrids that, due to their reliability, operability, and control characteristics, are currently considered sustainable solutions within this energy transition. This paper outlines the inclusion of DC microgrids as a technological solution to the problem of Non-Interconnected Zones (NIZ) in Colombia. Specifically, this study presents a detailed comparison of a DC microgrid with respect to an AC microgrid, discusses regulatory issues for the inclusion of these elements in the National Interconnected System (NIS), and evaluates a case study in a NIZ of Colombia such as Vigía del Fuerte in Antioquia. Based on the results, it is clearly deduced that DC microgrids are a feasible and profitable solution in NIZ in Colombia and these DC small-scale grids may decrease the total Net Present Cost (NPC) and the Levelized Cost of Energy (LCOE) by 10% for both, compared to AC microgrids for different microgrid configurations. Additionally, regarding these sustainable initiatives, it is essential to standardize the procedures associated with the commissioning of the microgrids, especially with the aspects of connection, protections, and operational adjustments if required by the regional utility company.


  • Open Access

    Optimizing Electric Racing Car Performance through Telemetry-Integrated Battery Charging: A Response Surface Analysis Approach

    by A. F. Villa-Salazar, I. N. Gomez-Miranda, A. F. Romero-Maya, J. D. Velásquez-Gómez, K. Lemmel-Vélez

    The link between the world of communications and the world of racing is provided by the telemetry systems in electric racing cars. These systems send real-time data about the vehicle’s behavior and systems to enable informed decisions during the race. The objective of this research was to integrate telemetry into the battery bank of an electric racing car in order to find the optimal values of current and voltage that optimize the charging process and thus improve the performance of the vehicle in competition using Response Surface Analysis. Specifically, the telemetry system consisted of an Arduino Mega, a digital wattmeter, and temperature sensors, all installed in the vehicle. Once the telemetry data were obtained, a response surface design was fitted with current, voltage, and temperature as factors varying from low to high values, with the objective function being to minimize the battery charging time. Using the response surface methodology and the steepest descent algorithm, it was found that all factors significantly affect the charging time, with the minimum charging time being 6961 s, obtained with a current of 2.4 amps and voltages of 50.5 volts and 43.6 volts.


  • Open Access

    Optimizing Electric Racing Car Performance Through Telemetry-Integrated Battery Charging: A Response Surface Analysis Approach

    by A.F. Villa-Salazar, I.N. Gomez-Miranda, A.F. Romero-Maya, J.D. Velasquez-Gomez, K. Lemmel-Velez

    The link between the world of communication and the world of racing is provided by telemetry systems in electric racing cars. These systems send real-time data about the vehicle’s behavior and systems to enable informed decisions during the race. The aim of this research was to integrate telemetry into the battery bank of a racing electric vehicle to find the optimal values of current and voltage that optimize the charging process, thus improving the vehicle’s performance in competition using Response Surface Analysis. Particularly, the telemetry system consisted of an Arduino Mega, a digital wattmeter, and temperature sensors, all installed in the vehicle. Once the telemetry data was obtained, a response surface design was adapted with current, voltage, and temperature as factors, varying from low to high values, with the objective function being to minimize the battery’s charging time. Applying the response surface methodology and the steepest descent algorithm, it was found that all factors significantly affect the charging time, with the minimum charge time being 6961 seconds, obtained with a current of 2.4 amps and voltages of 50.5 volts and 43.6 volts.


  • Open Access

    Distributed Consensus for Global Matrix Formation in the Principal Component Pursuit Scenario

    by Gustavo Suárez, Juan David Velásquez

    The aim behind principal component pursuit is to recover a low-rank matrix and a sparse matrix from a noisy signal which is the sum of both matrices. This optimization problem is a priori and non-convex and is useful in signal processing, data compression, image processing, machine learning, fluid dynamics, and more. Here, a distributed scheme described by a static undirected graph, where each agent only observes part of the noisy or corrupted matrix, is applied to achieve a consensus; then, a robust approach that can also handle missing values is applied using alternating directions to solve the convex relaxation problem, which actually solves the non-convex problem under some weak assumptions. Some examples of image recovery are shown, where the network of agents achieves consensus exponentially fast.