Erlei Gong
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Erlei Gong has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Jianzhong Li
College of Energy and Power Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China
4 shared publications - Qian Yao
College of Energy and Power Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China
3 shared publications - Renchuan Zheng
School of Energy and Power Engineering, Nanjing University of Aeronautics and Astronautics , Jiangsu Province, Nanjing 210016, China
3 shared publications - Wu Jin
School of Energy and Power Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China
2 shared publications Zhan Feng
School of Energy and Power Engineering, Nanjing University of Aeronautics and Astronautics , Jiangsu Province, Nanjing 210016, China
2 shared publications- Zhaolong Nie
School of Energy and Power Engineering, Nanjing University of Aeronautics and Astronautics , Jiangsu Province, Nanjing 210016, China
2 shared publications
Latest Publications
- Open Access
Numerical Investigation of the Non-Uniform Distribution of Outlet Parameters in a Radial Wave Rotor Combustor
The non-uniform distribution of outlet parameters in a Radial Wave Rotor Combustor (RWRC) significantly impacts downstream component performance. This study aims to investigate the spatial-temporal characteristics of temperature and pressure at the RWRC outlet. Three-dimensional unsteady Reynolds-Averaged Navier–Stokes (RANS) simulations were coupled with a User-Defined Function (UDF) to efficiently model the combustion process. The Shear-Stress Transport (SST) k-ω turbulence model was employed. Quantitative metrics including Relative Standard Deviation (RSD) and Christiansen Uniformity Coefficient (CUC) were introduced to evaluate the non-uniformity. The results reveal significant temporal fluctuations and spatial non-uniformity in both temperature and pressure. At 3000 r/min, the average temperature fluctuation amplitude and uniformity coefficient are 0.38 and 0.9, respectively, while the pressure fluctuation amplitude reaches 0.44. Crucially, temperature distribution expands circumferentially with increasing speed, whereas pressure distribution remains locally concentrated and is less sensitive to speed variations. This study provides a quantitative assessment of outlet non-uniformity in RWRC, highlighting the distinct behaviors between temperature and pressure distributions. The findings offer critical insights for the design and optimization of wave rotors and their integration with downstream components.
Open AccessNumerical Investigation of the Non-Uniform Distribution of Outlet Parameters in a Radial Wave Rotor Combustor
The non-uniform distribution of outlet parameters in a Radial Wave Rotor Combustor (RWRC) significantly impacts downstream component performance. This study aims to investigate the spatial-temporal characteristics of temperature and pressure at the RWRC outlet. Three-dimensional unsteady Reynolds-Averaged Navier–Stokes (RANS) simulations were coupled with a User-Defined Function (UDF) to efficiently model the combustion process. The Shear-Stress Transport (SST) k-ω turbulence model was employed. Quantitative metrics including Relative Standard Deviation (RSD) and Christiansen Uniformity Coefficient (CUC) were introduced to evaluate the non-uniformity. The results reveal significant temporal fluctuations and spatial non-uniformity in both temperature and pressure. At 3000 r/min, the average temperature fluctuation amplitude and uniformity coefficient are 0.38 and 0.9, respectively, while the pressure fluctuation amplitude reaches 0.44. Crucially, temperature distribution expands circumferentially with increasing speed, whereas pressure distribution remains locally concentrated and is less sensitive to speed variations. This study provides a quantitative assessment of outlet non-uniformity in RWRC, highlighting the distinct behaviors between temperature and pressure distributions. The findings offer critical insights for the design and optimization of wave rotors and their integration with downstream components.
- 31 December 2024
- Published by ASME International in Journal of Fluids Engineering
- Vol. 147 (6) , 1-34
Research on Unsteady Flow Mixing Characteristics of Centripetal Wave Rotor Combustor
The centripetal wave rotor combustor can better match the centrifugal compressor and the axial turbine of the reference machine, reduce the size of the engine and simplify the transition section structure. In this paper, we use numerical simulations to investigate the effects of blade shape and blade deflection angle on the unsteady flow mixing characteristics of the centripetal wave rotor combustor and complete the optimization of its structure. It is shown that in all designed channels, flow separation is present. The circumferential shear forces and pressure gradient forces contribute to the uneven distribution of the mixture within the channel, and their effects are irremovable. When the blade curve is tangent to the line connecting the endpoint of the inner diameter and the rotor center, it facilitates a particular configuration. This blade shape can enhance the uniformity of the fuel-air mixture distribution within the channel. The blade deflection angle has little effect on the fuel-air mixture distribution, the pressure distribution, and the prepressurization effect in the channel. Changing the width-to-diameter ratio of the channel, or the size of the ports and the phase difference can improve the distribution of the fuel-air mixture in the channel, and both of them are also the key factors affecting the prepressurization effect.
- 31 December 2024
- Published by ASME International in Journal of Fluids Engineering
- Vol. 147 (6) , 1-34
Research on Unsteady Flow Mixing Characteristics of Centripetal Wave Rotor Combustor
The centripetal wave rotor combustor can better match the centrifugal compressor and the axial turbine of the reference machine, reduce the size of the engine and simplify the transition section structure. In this paper, we use numerical simulations to investigate the effects of blade shape and blade deflection angle on the unsteady flow mixing characteristics of the centripetal wave rotor combustor and complete the optimization of its structure. It is shown that in all designed channels, flow separation is present. The circumferential shear forces and pressure gradient forces contribute to the uneven distribution of the mixture within the channel, and their effects are irremovable. When the blade curve is tangent to the line connecting the endpoint of the inner diameter and the rotor center, it facilitates a particular configuration. This blade shape can enhance the uniformity of the fuel-air mixture distribution within the channel. The blade deflection angle has little effect on the fuel-air mixture distribution, the pressure distribution, and the prepressurization effect in the channel. Changing the width-to-diameter ratio of the channel, or the size of the ports and the phase difference can improve the distribution of the fuel-air mixture in the channel, and both of them are also the key factors affecting the prepressurization effect.
- 22 November 2024
- Published by Wiley in Journal of Energy Resources Technology, Part A: Sustainable and Renewable Energy
- Vol. 1 (1) , 1-29
Numerical Study on the Enhancing Effects of Bump Turbulence Structures on Wave Rotor Combustor
Enhanced combustion technology is identified as a method that can improve both combustion efficiency and energy utilization. In this article, a bump turbulence structure designed for the channels of a wave rotor combustor is introduced. The effects of the bump turbulence structure are compared with those of a traditional straight-plate structure of equivalent height. The mechanisms through which the bump turbulence structure influences the flow field and accelerates the flame are analyzed, and the impact of various positions of the bump turbulence structure on combustion outcomes is explored. The analysis of results indicates that the bump structure exhibits superior advantages over the straight-plate structure when considering both pressure loss and enhanced combustion effects. The bump structure alters the pressure distribution within the channel, increasing disturbances in the flow field and creating a positive feedback mechanism with flame acceleration. The initial position of the bump structure influences the speed of flame propagation within the channel. When the bump structure is positioned close to the ignition source, a notable acceleration of the flame is observed during the initial stages of combustion. Conversely, when the bump structure is situated away from the ignition source, a significant flame acceleration is evident during the later stages of combustion. For the channels of wave rotor combustors, there should be an optimal position of the bump structure to maximize the effect of flame acceleration.
- 22 November 2024
- Published by Wiley in Journal of Energy Resources Technology, Part A: Sustainable and Renewable Energy
- Vol. 1 (1) , 1-29
Numerical Study on the Enhancing Effects of Bump Turbulence Structures on Wave Rotor Combustor
Enhanced combustion technology is identified as a method that can improve both combustion efficiency and energy utilization. In this article, a bump turbulence structure designed for the channels of a wave rotor combustor is introduced. The effects of the bump turbulence structure are compared with those of a traditional straight-plate structure of equivalent height. The mechanisms through which the bump turbulence structure influences the flow field and accelerates the flame are analyzed, and the impact of various positions of the bump turbulence structure on combustion outcomes is explored. The analysis of results indicates that the bump structure exhibits superior advantages over the straight-plate structure when considering both pressure loss and enhanced combustion effects. The bump structure alters the pressure distribution within the channel, increasing disturbances in the flow field and creating a positive feedback mechanism with flame acceleration. The initial position of the bump structure influences the speed of flame propagation within the channel. When the bump structure is positioned close to the ignition source, a notable acceleration of the flame is observed during the initial stages of combustion. Conversely, when the bump structure is situated away from the ignition source, a significant flame acceleration is evident during the later stages of combustion. For the channels of wave rotor combustors, there should be an optimal position of the bump structure to maximize the effect of flame acceleration.
- Open Access
Performance Analysis of Wave Rotor Combustor Integration into Baseline Engines: A Comparative Study of Pressure-Gain and Work Cycles
This study presents two concepts for integrating a wave rotor combustor (WRC) into a baseline engine: the wave rotor pressure-gain cycle (WRPGC) and the wave rotor work cycle (WRWC). Performance parameters were calculated under different thermodynamic cycles, and a comparative analysis of the thermodynamic cycles was conducted, considering both the ideal- and actual-loss conditions. Furthermore, the impact of the WRC precompression ratio, turbine inlet temperature, and fixed peak cycle temperature on the thermodynamic-cycle performance was investigated. The results indicate that embedding a WRC into a baseline engine with a compressor pressure ratio higher than 24.0 does not lead to an improvement in the thermal efficiency. However, under a baseline engine pressure ratio of 3.6, the actual-loss WRC cycle achieves efficiency improvements of 40.5% and 49.5% in the WRPGC and WRWC, respectively, compared to the baseline engine cycle. Increasing the wave rotor precompression ratio or the turbine inlet temperature ratio results in greater performance improvements for the WRWC compared to the WRPGC. When the peak cycle temperature of the wave rotor is fixed, there exists a narrow pressure ratio range wherein the WRPGC outperforms the WRWC. Therefore, the WRPGC is more suitable for embedment in baseline engines with lower pressure ratios.
Open AccessPerformance Analysis of Wave Rotor Combustor Integration into Baseline Engines: A Comparative Study of Pressure-Gain and Work Cycles
This study presents two concepts for integrating a wave rotor combustor (WRC) into a baseline engine: the wave rotor pressure-gain cycle (WRPGC) and the wave rotor work cycle (WRWC). Performance parameters were calculated under different thermodynamic cycles, and a comparative analysis of the thermodynamic cycles was conducted, considering both the ideal- and actual-loss conditions. Furthermore, the impact of the WRC precompression ratio, turbine inlet temperature, and fixed peak cycle temperature on the thermodynamic-cycle performance was investigated. The results indicate that embedding a WRC into a baseline engine with a compressor pressure ratio higher than 24.0 does not lead to an improvement in the thermal efficiency. However, under a baseline engine pressure ratio of 3.6, the actual-loss WRC cycle achieves efficiency improvements of 40.5% and 49.5% in the WRPGC and WRWC, respectively, compared to the baseline engine cycle. Increasing the wave rotor precompression ratio or the turbine inlet temperature ratio results in greater performance improvements for the WRWC compared to the WRPGC. When the peak cycle temperature of the wave rotor is fixed, there exists a narrow pressure ratio range wherein the WRPGC outperforms the WRWC. Therefore, the WRPGC is more suitable for embedment in baseline engines with lower pressure ratios.