Xianting Su
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Xianting Su has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Shubin Liu
Xidian University
6 shared publications - Xiaoteng Zhao
Xidian University
6 shared publications - Zhangming Zhu
Xidian University
6 shared publications - Zhicheng Dong
Key Laboratory of Analog Integrated Circuits, School of Integrated Circuits, Xidian University, Xian, China
6 shared publications - Hongzhi Liang
Xidian University
4 shared publications - Chenxi Han
Xidian University
3 shared publications
Latest Publications
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 73 (11) , 1094-1098
A 56-Gb/s NRZ and 80-Gb/s PAM-4 Receiver With an Analog Decision Feed-Forward Equalizer Achieving Up To 22.5-dB Compensation at 28 GHz
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 73 (11) , 1094-1098
A 56-Gb/s NRZ and 80-Gb/s PAM-4 Receiver With an Analog Decision Feed-Forward Equalizer Achieving Up To 22.5-dB Compensation at 28 GHz
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
- Vol. 34 (10) , 3137-3147
A 0.054-mm 2 Clock Generator With 26-GHz Double-Edge Sampling PLL and 7-bit Multifrequency PI Scoring 42.5-fs rms Jitter and −251.0-dB FoM J
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
- Vol. 34 (10) , 3137-3147
A 0.054-mm 2 Clock Generator With 26-GHz Double-Edge Sampling PLL and 7-bit Multifrequency PI Scoring 42.5-fs rms Jitter and −251.0-dB FoM J
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- p. 1-14
A Reference-Less CDR Using SAR-Based Frequency-Acquisition Technique Achieving Constant Band-Searching Time and up to 63.64 Gb/s/ μ s Acquisition Speed
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- p. 1-14
A Reference-Less CDR Using SAR-Based Frequency-Acquisition Technique Achieving Constant Band-Searching Time and up to 63.64 Gb/s/ μ s Acquisition Speed
- 5 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 61 (5) , 2059-2072
A 0.0006-mm 2 , 0.13-pJ/bit, 9–21-Gb/s Sub-Sampling CDR With Inverter-Based Frequency Multiplier and Embedded 1:3 DEMUX in 65-nm CMOS
This article presents a 9–21-Gb/s inductor-less frequency-multiplying sub-sampling (FXSS) clock and data recovery (CDR) circuit with an embedded 1:3 demultiplexer (DEMUX) for multi-lane serial interfaces. It features a compact design with linear modeling and theoretical analysis of the FXSS architecture. An inverter-based frequency multiplier (FX) in the clock feedback path enables the ring voltage-controlled oscillator (RVCO) and transmission-gated retimers to operate at one-third rates. The primary–secondary sub-sampling phase detector (SSPD) supports full-rate triple-frequency clocks. The FX can suppress in-band noises, while a ~200-MHz loop bandwidth (BW) mitigates out-of-band RVCO noise. A duty cycle corrector (DCC) ensures fine retiming deskew. Fabricated in 65-nm CMOS technology, the proposed CDR occupies 0.0006 mm2 and achieves a best-in-class 348.2-fsrms integrated jitter and 0.13-pJ/bit energy efficiency at 21 Gb/s. It demonstrates a jitter tolerance (JTOL) of 0.44 UIpp with a bit error rate (BER) of less than $10^{-12}$ .
- 5 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 61 (5) , 2059-2072
A 0.0006-mm 2 , 0.13-pJ/bit, 9–21-Gb/s Sub-Sampling CDR With Inverter-Based Frequency Multiplier and Embedded 1:3 DEMUX in 65-nm CMOS
This article presents a 9–21-Gb/s inductor-less frequency-multiplying sub-sampling (FXSS) clock and data recovery (CDR) circuit with an embedded 1:3 demultiplexer (DEMUX) for multi-lane serial interfaces. It features a compact design with linear modeling and theoretical analysis of the FXSS architecture. An inverter-based frequency multiplier (FX) in the clock feedback path enables the ring voltage-controlled oscillator (RVCO) and transmission-gated retimers to operate at one-third rates. The primary–secondary sub-sampling phase detector (SSPD) supports full-rate triple-frequency clocks. The FX can suppress in-band noises, while a ~200-MHz loop bandwidth (BW) mitigates out-of-band RVCO noise. A duty cycle corrector (DCC) ensures fine retiming deskew. Fabricated in 65-nm CMOS technology, the proposed CDR occupies 0.0006 mm2 and achieves a best-in-class 348.2-fsrms integrated jitter and 0.13-pJ/bit energy efficiency at 21 Gb/s. It demonstrates a jitter tolerance (JTOL) of 0.44 UIpp with a bit error rate (BER) of less than $10^{-12}$ .
- 22 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 73 (4) , 2036-2049
A Configurable Multimode Nonuniform Eye-Opening Monitor for High-Speed Wireline Communication Achieving 3-μs EW/EH Evaluation and 0.98-R² Accuracy
This article presents a configurable multimode eye-opening monitor (EOM) with nonuniform sampling and quantization for an on-chip high-speed link built-in self-test (BIST). The EOM can operate in three modes, enabling it to not only capture the color-graded eye diagram but also rapidly outline its contour, eye height (EH), and eye width (EW). In the nonuniform scanning mode (NSM), the EH and EW are swiftly measured using an optimization algorithm to adjust the control codes of a phase interpolator (PI) and a digital-to-analog converter (DAC). In the fast-multisampling mode (FMSM), the reduced number of samples in each pixel facilitates a prompt generation of the eye contour. The EOM can also reconstruct the eye diagram in the multisampling mode (MSM) by analyzing the probability density function (PDF) of a 128 × 63 pixel array. Fabricated in a 28-nm CMOS technology, the EOM can operate up to 26 Gb/s within 0.005-mm2 area. At 26 Gb/s, it consumes 14.55 mW with more than 0.98-R2 accuracy and takes up 933 μs in the MSM, 597 μs in the FMSM, and ~3 μs in the NSM, respectively.
- 22 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 73 (4) , 2036-2049
A Configurable Multimode Nonuniform Eye-Opening Monitor for High-Speed Wireline Communication Achieving 3-μs EW/EH Evaluation and 0.98-R² Accuracy
This article presents a configurable multimode eye-opening monitor (EOM) with nonuniform sampling and quantization for an on-chip high-speed link built-in self-test (BIST). The EOM can operate in three modes, enabling it to not only capture the color-graded eye diagram but also rapidly outline its contour, eye height (EH), and eye width (EW). In the nonuniform scanning mode (NSM), the EH and EW are swiftly measured using an optimization algorithm to adjust the control codes of a phase interpolator (PI) and a digital-to-analog converter (DAC). In the fast-multisampling mode (FMSM), the reduced number of samples in each pixel facilitates a prompt generation of the eye contour. The EOM can also reconstruct the eye diagram in the multisampling mode (MSM) by analyzing the probability density function (PDF) of a 128 × 63 pixel array. Fabricated in a 28-nm CMOS technology, the EOM can operate up to 26 Gb/s within 0.005-mm2 area. At 26 Gb/s, it consumes 14.55 mW with more than 0.98-R2 accuracy and takes up 933 μs in the MSM, 597 μs in the FMSM, and ~3 μs in the NSM, respectively.
- 26 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 59 (11) , 3767-3779
A 0.08%/V 32.3-ppm/°C 36.6-kHz Unregulated Current-Reuse Ring Oscillator With VGS-Ratio-Based Compensation Using One-Type-Only Resistor
This article introduces a 36.6-kHz unregulated ring oscillator (RO) tailored for Internet-of-Things (IoT) applications, demonstrating robustness to variations in supply voltage and temperature. A temperature compensation scheme of gate–source voltage ratio is theoretically proven and shows that the potential to be applied in some CMOS technologies that lack resistors with complementary temperature coefficients (TCs). Combining PMOS-only delay cells along with a complementary-to-absolute-temperature (CTAT) current reference, the RO ensures stable frequencies within variation ranges of up to 2.4 V and 180 °C, while exhibiting low process variations. In addition, a current-reuse technique is employed to mitigate the resistor area. Fabricated in a 65-nm CMOS technology, the RO occupies an area of 0.012 mm2, and nine samples are measured. The prototype achieves an energy efficiency of 2.74 pJ/cycle and exhibits a supply sensitivity of 0.08%/V ranging from 1.3 to 3.7 V without voltage regulators. Moreover, thanks to OFF-state leakage currents for high-order compensation, a TC of 32.3 ppm/°C in the box method is achieved from -30 °C to 150 °C with frequency trimming at room temperature (RT) and batch trimming.
- 26 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 59 (11) , 3767-3779
A 0.08%/V 32.3-ppm/°C 36.6-kHz Unregulated Current-Reuse Ring Oscillator With VGS-Ratio-Based Compensation Using One-Type-Only Resistor
This article introduces a 36.6-kHz unregulated ring oscillator (RO) tailored for Internet-of-Things (IoT) applications, demonstrating robustness to variations in supply voltage and temperature. A temperature compensation scheme of gate–source voltage ratio is theoretically proven and shows that the potential to be applied in some CMOS technologies that lack resistors with complementary temperature coefficients (TCs). Combining PMOS-only delay cells along with a complementary-to-absolute-temperature (CTAT) current reference, the RO ensures stable frequencies within variation ranges of up to 2.4 V and 180 °C, while exhibiting low process variations. In addition, a current-reuse technique is employed to mitigate the resistor area. Fabricated in a 65-nm CMOS technology, the RO occupies an area of 0.012 mm2, and nine samples are measured. The prototype achieves an energy efficiency of 2.74 pJ/cycle and exhibits a supply sensitivity of 0.08%/V ranging from 1.3 to 3.7 V without voltage regulators. Moreover, thanks to OFF-state leakage currents for high-order compensation, a TC of 32.3 ppm/°C in the box method is achieved from -30 °C to 150 °C with frequency trimming at room temperature (RT) and batch trimming.