RDRanjit Kumar Dehury

Ranjit Kumar Dehury

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ranjit Kumar Dehury has a total of 25 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Impression creep behavior of die-cast MRI230D magnesium alloy

    by Ranjit Kumar Dehury, Vaskuri Cs Theja, Vinit Gupta, Yogesh G Joshi

    The current work investigates the impression creep behavior of the die-cast MRI230D alloy. The impression creep experiments are carried out in the temperature range of 150–225 °C and stress range 225–325 MPa by impressing a cylindrical indenter on the surface of the specimen. The microstructure of MRI230D consists of α-Mg phase, (Mg,Al) 2 Ca (C36) phase, and a few Al-Mn-rich phases. All the creep plots exhibit a well-defined primary creep followed by secondary (steady state) creep. The tertiary stage is missing in all the plots owing to the compressive nature of the tests. XRD and microstructural observation of the as-cast and creep tested specimens confirm the superior creep resistance of the MRI230D alloy due to the presence of the thermally stable C36 phase along grain boundaries.

  • Feasibility of nanofluids in refrigeration systems: A comprehensive review

    by Yogesh Joshi, Dinesh Zanwar, Sandeep Joshi, Vinit Gupta, Rahul Deshmukh, Ranjit Kumar Dehury

    This work comprehensively reviews the innovative application of nanofluids as refrigerants in diverse refrigeration systems such as vapor compression refrigeration systems (VCRS), vapor absorption refrigeration systems (VARS), refrigeration based on solar energy, magnetic refrigeration, air-conditioning system and ejector refrigeration technologies. The development of nanofluid shows potential for enhancing efficiency, performance and environmental sustainability in refrigeration systems. This work presents a detailed review of research status in this field and practical applications. Nanofluids are promising candidates for significantly improving heat transfer rates, reducing energy consumption and reducing environmental impact of refrigerants. Special attention is also drawn to the VCRS’s integration, as nanofluids have been noted with improvement in refrigerant properties, assisting in the better performance of lubricants and enhancing heat exchanger efficiency. This review is aimed at the primary objective of analyzing recent findings in nanomaterials with respect to the subject, establishing benefits and challenges existing in the utilization of nanofluids in refrigeration systems.


  • EXPERIMENTAL INVESTIGATION OF WETTING CHARACTERISTICS OF Al–Sn ALLOY

    by Priya Tiwari, Ranjit Kumar Dehury, Vinit Gupta, Rahul Kumar, Yogesh G. Joshi

    This work studies the polycrystalline Al–Sn system specifically Al-20 wt.%Sn and Al-32 wt.%Sn for the grain boundary wetting transition. The wetting transition behavior was studied against varying annealing temperatures and alloy composition. The samples produced were studied for grain boundary segregation, grain boundary phase identification, and distribution using various characterization techniques. In the heat-treated samples, clear evidence of wetting transition that led to phase and structural transformations at the Grain Boundaries (GBs) was observed in the Al–Sn binary system. A thin line of wetting was observed for Al-20 wt.%Sn, while in the Al-32 wt.%Sn system, the enrichment of GBs with the liquid phase was appreciable. Additionally, the extent of wetting and associated structural changes increased with temperature. The phase diagram and X-ray Diffraction (XRD) patterns did not show the formation of any new phase after quenching. This suggests that Sn segregation in the Al–Sn alloy resulted from an insoluble Sn phase and significant differences in melting temperature and density. The XRD patterns indicated an increase in the intensity of Sn peaks with temperature, implying a higher degree of tin segregation at elevated temperatures. The differential scanning calorimetry analysis obtains a distinctive signature of the grain boundary solidus temperature.

  • Performance Investigation of the Automotive Radiator Using Functionalized Graphene Quantum Dots-Based Nanosuspension

    by Yogesh G. Joshi, Vinit Gupta, Nikhil Shrikhande, Ranjit Kumar Dehury, Vrushabh Laddhad, Rahul Kumar

    This study investigates the performance enhancement of an automotive radiator using functionalized graphene quantum dots (FGQD)-based nanosuspensions. The primary objective is to evaluate the thermal conductivity, viscosity and heat transfer performance of FGQD-water nanosuspensions at varying concentrations (0.5[ ]wt.%, 1.0[ ]wt.% and 1.5[ ]wt.%). The research is carried out in two phases. In the first phase, the synthesis of graphene quantum dots (GQD), its dispersion in water, and the subsequent characterization of thermal properties are precisely detailed. Thermophysical properties of these nanosuspensions including thermal conductivity, viscosity and density across varying flow rates and temperatures are assessed. The thermal conductivity was measured experimentally and validated using the Hamilton model, while viscosity was assessed using the Brinkman model. In the second phase of the experimentation, experimental evaluations were conducted on a HELLA 376757051 radiator, analyzing the impact of FGQD concentration on heat transfer coefficient, pressure drop and performance index at different coolant flow rates. Nanosuspensions are experimentally examined at various coolant flow rates. The research shows a significant enhancement in heat transfer coefficients when GQD are added at concentrations of 0.50[ ]wt.%, 1.00[ ]wt.% and 1.5[ ]wt.% in comparison to the regular conventional water-based coolant. The results highlighted that increased levels of GQD led to a substantial improvement in heat transfer efficiency. It is observed that the 1.5[ ]wt.% FGQD-water nanosuspension achieves a 107% increase in heat transfer coefficient. On the other hand, 0.5[ ]wt.% offers an optimal balance between heat transfer enhancement and minimal pressure drop, making it more suitable for high-flow applications. The performance index analysis confirms that FGQD-water nanosuspensions significantly improve radiator efficiency. The findings highlight the potential of FGQD as an advanced nanofluid for automotive cooling applications, offering superior thermal performance as compared to conventional coolants.

  • Open Access

    Antimicrobial and antiviral properties of stainless steel enhanced by controlled silver nano-island deposition: A safe and sustainable by design approach

    by Bharti Malvi, Ranga Teja Pidathala, Dipeshwari J. Shewale, Pramina Kumari Pandey, Nishaben Patel, Ranjit Dehury, Swagat Das, Manas Paliwal, Abhay Raj Singh Gautam, Abhijit Mishra, et al.


  • Synthesis and Characterization of Novel Graphene Nanoplatelet-Based Nanofibers for Thermal Energy Storage

    by Yogesh G. Joshi, Mahelaqua A. Haque, Vinit Gupta, Ranjit Kumar Dehury, Abira Rashid

    The recent progress in nanofiber research has demonstrated the potential for improving the physical properties of materials through the integration of graphene nanoplatelets (GNP). This study involves the synthesis and characterization of novel GNP-infused polyvinylpyrrolidone (PVP) electrospun nanofibers. The required precursor solution was prepared using dimethylformamide (DMF) as a solvent, and that included 1.5 wt.% concentrations of GNP with 20 wt.% of PVP in 10 mL of DMF solution. The investigation using scanning electron microscopy (SEM) and transmission electron microscopy (TEM) showed the morphology of the fibers with the distribution of graphene nanoplatelets. The zeta potential analysis demonstrates that the GNP/PVP nanofibers exhibit significant stability across a wide pH range, particularly in highly acidic and basic conditions. The thermogravimetric analysis (TGA) analysis showed exceptional thermal stability, with minimal weight loss until 300–400°C. The degradation of the PVP matrix was observed beyond 400°C. The results of the study show that GNP/PVP nanofibers have significant potential for specific applications in thermal management and energy storage under controlled temperature conditions.

  • Elemental Influence on Oxidation Behaviour of Cantor‐Based and Refractory High Entropy Alloys: A Critical Review

    by Ranjit Kumar Dehury, Rahul Kumar, Yogesh G. Joshi, Vinit Gupta

    This article reviews the oxidation behaviour of the two most significant high entropy alloy systems (HEAs) namely Cantor‐based and refractory HEAs. HEAs have been extensively researched and show potential applications in various industries, including marine engine manufacturing, chemical industry, furnaces, ducting, heat exchangers, jet engines, steam turbines, nuclear reactors and electronic devices, among others. Effect of the presence of elements such as aluminium, manganese, chromium, silicon, tantalum, vanadium etc. is studied for catalysing the oxidation of HEAs. Aluminium, chromium, and silicon are reportedly found to considerably impact the oxidation kinetics and enhance the oxidation resistance. However, silicon can positively or adversely affect the oxidation resistance depending on its concentration and alloy composition. Other elements like manganese tend to adversely impact the oxidation resistance of FeCoNi‐based HEAs. Refractory elements are typically found to be not suitable for oxidation studies due to the formation of non‐protective oxide layers. However, refractory HEAs offer interesting trends both in terms of enhancing or reducing oxidation resistance depending on the alloying elements. Similarly, findings related to other elements are also presented and elaborated.