Kerin F. Romero
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Kerin F. Romero has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
- Muditha K. Heenkenda
Department of Geography and the Environment, Lakehead University, Thunder Bay, ON P7B 5E1, Canada
5 shared publications - Charot M. Vargas
Department of Agricultural Engineering, Instituto Tecnologico de Costa Rica, Cartago 30101, Costa Rica
1 shared publication - Ericka Picado Mora
Instituto Tecnológico de Costa Rica
1 shared publication - Esteban Rodriguez Leandro
School of Agricultural Engineering, Institute of Technology Costa Rica, Cartago 30101, Costa Rica
1 shared publication - Juan Carlos Jiménez
Department of Agricultural Engineering, CETIA Centro de Investigación y Extensión en Tecnología e Ingeniería Agrícola, Instituto Tecnológico de Costa Rica, Cartago P.O. Box 159-7050, Costa Rica
1 shared publication - Marcelo Quesada
Department of Agricultural Engineering, CETIA Centro de Investigación y Extensión en Tecnología e Ingeniería Agrícola, Instituto Tecnológico de Costa Rica, Cartago P.O. Box 159-7050, Costa Rica
1 shared publication
Latest Publications
- Open Access
- 1 May 2026
- Published by MDPI AG in Agriengineering
- Vol. 8 (5) , 172
Mapping Sugarcane Weeds Using Spectral Signatures Derived from Spectroscopic Data and Multispectral Images
Weed interference during early growth stages is a major constraint on sugarcane productivity, yet effective tools for species-specific detection remain limited in tropical agricultural systems. This study evaluated the spectral separability between Sugarcane (Saccharum officinarum) and a dominant weed species, Rottboellia cochinchinensis, to develop an accessible framework for early-stage weed mapping. Multispectral data acquired from an Unmanned Aerial Vehicle (UAV) and hyperspectral data obtained from a field spectrometer were utilized. Hyperspectral data were synthesized to reconstruct multispectral bands (UAV image bands) using a regularized linear synthesis model, thereby generating spectral signatures. Spectral separability between sugarcane and Rottboellia cochinchinensis was assessed visually and statistically (Jeffries–Matusita distance). Blue and Green bands provided the strongest differentiation between species, while RedEdge enhanced separability when paired with pigment-sensitive wavelengths. When using vegetation indices based on the near-infrared (NIR) band, the visual appearance of class separation was poor due to the NIR band’s sensitivity to variation in leaf internal structure, canopy architecture, water content, and spectral mixing with the soil background at the early stage of sugarcane. These results were used to differentiate weed coverage from sugarcane. Object-based image analysis (OBIA) outperformed the pixel-based method, achieving higher overall accuracy (0.9038) and a more spatially coherent weed delineation (Kappa = 0.8499). These findings suggest that synthesized spectral signatures of Rottboellia cochinchinensis and sugarcane, combined with targeted spectral indices and OBIA techniques, offer a practical and transferable approach for early detection of Rottboellia cochinchinensis at the farm level.
- 1 May 2026
- Published by MDPI AG in Agriengineering
- Vol. 8 (5) , 172
Open AccessMapping Sugarcane Weeds Using Spectral Signatures Derived from Spectroscopic Data and Multispectral Images
Weed interference during early growth stages is a major constraint on sugarcane productivity, yet effective tools for species-specific detection remain limited in tropical agricultural systems. This study evaluated the spectral separability between Sugarcane (Saccharum officinarum) and a dominant weed species, Rottboellia cochinchinensis, to develop an accessible framework for early-stage weed mapping. Multispectral data acquired from an Unmanned Aerial Vehicle (UAV) and hyperspectral data obtained from a field spectrometer were utilized. Hyperspectral data were synthesized to reconstruct multispectral bands (UAV image bands) using a regularized linear synthesis model, thereby generating spectral signatures. Spectral separability between sugarcane and Rottboellia cochinchinensis was assessed visually and statistically (Jeffries–Matusita distance). Blue and Green bands provided the strongest differentiation between species, while RedEdge enhanced separability when paired with pigment-sensitive wavelengths. When using vegetation indices based on the near-infrared (NIR) band, the visual appearance of class separation was poor due to the NIR band’s sensitivity to variation in leaf internal structure, canopy architecture, water content, and spectral mixing with the soil background at the early stage of sugarcane. These results were used to differentiate weed coverage from sugarcane. Object-based image analysis (OBIA) outperformed the pixel-based method, achieving higher overall accuracy (0.9038) and a more spatially coherent weed delineation (Kappa = 0.8499). These findings suggest that synthesized spectral signatures of Rottboellia cochinchinensis and sugarcane, combined with targeted spectral indices and OBIA techniques, offer a practical and transferable approach for early detection of Rottboellia cochinchinensis at the farm level.
- Open Access
- 22 September 2025
- Published by MDPI AG in Agriengineering
- Vol. 7 (9) , 310
Development of a Testing Method for the Accuracy and Precision of GNSS and LiDAR Technology
This study evaluates the positional accuracy of Global Navigation Satellite Systems (GNSS) and Unmanned Aerial vehicle (UAV)-based LiDAR systems in terrain modeling, using a total station as a reference. The research was conducted over 17 Ground Control Points (GCPs), with measurements obtained using a CHCNAV i50 GNSS receiver and a DJI Zenmuse L1 Light Detection and Ranging (LiDAR) sensor mounted on a UAV. Accuracy was assessed for horizontal (X, Y) and vertical (Z) components by comparing the results against total station data. Errors were quantified using statistical metrics such as Mean Absolute Error (MAE), Root Mean Square Error (RMSE), and RMS at 1σ. GNSS exhibited superior horizontal accuracy with an RMS 1σ of 1.1 cm, while LiDAR achieved 1.7 cm. In contrast, GNSS outperformed LiDAR in vertical precision, achieving a 1σ RMS of 6.4 cm compared to 6.6 cm for LiDAR. These findings align with manufacturer specifications and international standards such as those of the American Society for Photogrammetry and Remote Sensing (ASPRS). The results highlight that GNSS is preferable for applications requiring high horizontal precision, while LiDAR is better suited for vertical modeling and terrain analysis. The combination of both systems may offer enhanced results for comprehensive geospatial surveys. Overall, both technologies demonstrated sub-decimetric accuracy suitable for precision agriculture, civil engineering, and environmental monitoring.
- 22 September 2025
- Published by MDPI AG in Agriengineering
- Vol. 7 (9) , 310
Open AccessDevelopment of a Testing Method for the Accuracy and Precision of GNSS and LiDAR Technology
This study evaluates the positional accuracy of Global Navigation Satellite Systems (GNSS) and Unmanned Aerial vehicle (UAV)-based LiDAR systems in terrain modeling, using a total station as a reference. The research was conducted over 17 Ground Control Points (GCPs), with measurements obtained using a CHCNAV i50 GNSS receiver and a DJI Zenmuse L1 Light Detection and Ranging (LiDAR) sensor mounted on a UAV. Accuracy was assessed for horizontal (X, Y) and vertical (Z) components by comparing the results against total station data. Errors were quantified using statistical metrics such as Mean Absolute Error (MAE), Root Mean Square Error (RMSE), and RMS at 1σ. GNSS exhibited superior horizontal accuracy with an RMS 1σ of 1.1 cm, while LiDAR achieved 1.7 cm. In contrast, GNSS outperformed LiDAR in vertical precision, achieving a 1σ RMS of 6.4 cm compared to 6.6 cm for LiDAR. These findings align with manufacturer specifications and international standards such as those of the American Society for Photogrammetry and Remote Sensing (ASPRS). The results highlight that GNSS is preferable for applications requiring high horizontal precision, while LiDAR is better suited for vertical modeling and terrain analysis. The combination of both systems may offer enhanced results for comprehensive geospatial surveys. Overall, both technologies demonstrated sub-decimetric accuracy suitable for precision agriculture, civil engineering, and environmental monitoring.
- Open Access
Mapping Spatial Variability of Sugarcane Foliar Nitrogen, Phosphorus, Potassium and Chlorophyll Concentrations Using Remote Sensing
Various nutrients are needed during the sugarcane growing season for plant development and productivity. However, traditional methods for assessing nutritional status are often costly and time consuming. This study aimed to determine the level of nitrogen (N), phosphorus (P), potassium (K) and chlorophyll of sugarcane plants using remote sensing. Remotely sensed images were obtained using a MicaSense RedEdge-P camera attached to a drone. Leaf chlorophyll content was measured in the field using an N-Tester chlorophyll meter, and leaf samples were collected and analyzed in the laboratory for N, P and K. The highest correlation between field samples and predictor variables (spectral bands, selected vegetation indices, and plant height from Light Detection and Ranging (LiDAR)), were noted.The spatial distribution of chlorophyll, N, P, and K maps achieved 60%, 75%, 96% and 50% accuracies, respectively. The spectral profiles helped to identify areas with visual differences. Spatial variability of nutrient maps confirmed that moisture presence leads to nitrogen and potassium deficiencies, excess phosphorus, and a reduction in vegetation density (93.82%) and height (2.09 m), compared to green, healthy vegetation (97.64% density and 3.11 m in height). This robust method of assessing foliar nutrients is repeatable for the same sugarcane variety at certain conditions and leads to sustainable agricultural practices in Costa Rica.
Open AccessMapping Spatial Variability of Sugarcane Foliar Nitrogen, Phosphorus, Potassium and Chlorophyll Concentrations Using Remote Sensing
Various nutrients are needed during the sugarcane growing season for plant development and productivity. However, traditional methods for assessing nutritional status are often costly and time consuming. This study aimed to determine the level of nitrogen (N), phosphorus (P), potassium (K) and chlorophyll of sugarcane plants using remote sensing. Remotely sensed images were obtained using a MicaSense RedEdge-P camera attached to a drone. Leaf chlorophyll content was measured in the field using an N-Tester chlorophyll meter, and leaf samples were collected and analyzed in the laboratory for N, P and K. The highest correlation between field samples and predictor variables (spectral bands, selected vegetation indices, and plant height from Light Detection and Ranging (LiDAR)), were noted.The spatial distribution of chlorophyll, N, P, and K maps achieved 60%, 75%, 96% and 50% accuracies, respectively. The spectral profiles helped to identify areas with visual differences. Spatial variability of nutrient maps confirmed that moisture presence leads to nitrogen and potassium deficiencies, excess phosphorus, and a reduction in vegetation density (93.82%) and height (2.09 m), compared to green, healthy vegetation (97.64% density and 3.11 m in height). This robust method of assessing foliar nutrients is repeatable for the same sugarcane variety at certain conditions and leads to sustainable agricultural practices in Costa Rica.
- Open Access
Developing Site-Specific Prescription Maps for Sugarcane Weed Control Using High-Spatial-Resolution Images and Light Detection and Ranging (LiDAR)
Sugarcane is a perennial grass species mainly for sugar production and one of the significant crops in Costa Rica, where ideal growing conditions support its cultivation. Weed control is a critical aspect of sugarcane farming, traditionally managed through preventive or corrective mechanical and chemical methods. However, these methods can be time-consuming and costly. This study aimed to develop site-specific, variable rate prescription maps for weed control using remote sensing. High-spatial-resolution images (5 cm) and Light Detection And Ranging (LiDAR) were acquired using a Micasense Rededge-P camera and a DJI L1 sensor mounted on a drone. Precise locations of weeds were collected for calibration and validation. Normalized Difference Vegetation Index derived from multispectral images separated vegetation coverage and soil. A deep learning (DL) algorithm further classified vegetation coverage into sugarcane and weeds. The DL model performed well without overfitting. The classification accuracy was 87% compared to validation samples. The density and average heights of weed patches were extracted from the canopy height model (LiDAR). They were used to derive site-specific prescription maps for weed control. This efficient and precise alternative to traditional methods could optimize weed control, reduce herbicide usage and provide more profitable yield.
Open AccessDeveloping Site-Specific Prescription Maps for Sugarcane Weed Control Using High-Spatial-Resolution Images and Light Detection and Ranging (LiDAR)
Sugarcane is a perennial grass species mainly for sugar production and one of the significant crops in Costa Rica, where ideal growing conditions support its cultivation. Weed control is a critical aspect of sugarcane farming, traditionally managed through preventive or corrective mechanical and chemical methods. However, these methods can be time-consuming and costly. This study aimed to develop site-specific, variable rate prescription maps for weed control using remote sensing. High-spatial-resolution images (5 cm) and Light Detection And Ranging (LiDAR) were acquired using a Micasense Rededge-P camera and a DJI L1 sensor mounted on a drone. Precise locations of weeds were collected for calibration and validation. Normalized Difference Vegetation Index derived from multispectral images separated vegetation coverage and soil. A deep learning (DL) algorithm further classified vegetation coverage into sugarcane and weeds. The DL model performed well without overfitting. The classification accuracy was 87% compared to validation samples. The density and average heights of weed patches were extracted from the canopy height model (LiDAR). They were used to derive site-specific prescription maps for weed control. This efficient and precise alternative to traditional methods could optimize weed control, reduce herbicide usage and provide more profitable yield.
- Open Access
Estimating Sugarcane Maturity Using High Spatial Resolution Remote Sensing Images
Sugarcane suffers from the increased frequency and severity of droughts and floods, negatively affecting growing conditions. Climate change has affected cultivation, and the growth dynamics have changed over the years. The identification of the development stages of sugarcane is necessary to reduce its vulnerability. Traditional methods are inefficient when detecting those changes, especially when estimating sugarcane maturity—a critical step in sugarcane production. Hence, the study aimed to develop a cost- and time-effective method to estimate sugarcane maturity using high spatial-resolution remote sensing data. Images were acquired using a drone. Field samples were collected and measured in the laboratory for brix and pol values. Normalized Difference Water Index, Green Normalized Difference Vegetation Index and green band were chosen (highest correlation with field samples) for further analysis. Random forest (RF), Support Vector Machine (SVM), and multi-linear regression models were used to predict sugarcane maturity using the brix and pol variables. The best performance was obtained from the RF model. Hence, the maturity index of the study area was calculated based on the RF model results. It was found that the field plot has not yet reached maturity for harvesting. The developed cost- and time-effective method allows temporal crop monitoring and optimizes the harvest time.
Open AccessEstimating Sugarcane Maturity Using High Spatial Resolution Remote Sensing Images
Sugarcane suffers from the increased frequency and severity of droughts and floods, negatively affecting growing conditions. Climate change has affected cultivation, and the growth dynamics have changed over the years. The identification of the development stages of sugarcane is necessary to reduce its vulnerability. Traditional methods are inefficient when detecting those changes, especially when estimating sugarcane maturity—a critical step in sugarcane production. Hence, the study aimed to develop a cost- and time-effective method to estimate sugarcane maturity using high spatial-resolution remote sensing data. Images were acquired using a drone. Field samples were collected and measured in the laboratory for brix and pol values. Normalized Difference Water Index, Green Normalized Difference Vegetation Index and green band were chosen (highest correlation with field samples) for further analysis. Random forest (RF), Support Vector Machine (SVM), and multi-linear regression models were used to predict sugarcane maturity using the brix and pol variables. The best performance was obtained from the RF model. Hence, the maturity index of the study area was calculated based on the RF model results. It was found that the field plot has not yet reached maturity for harvesting. The developed cost- and time-effective method allows temporal crop monitoring and optimizes the harvest time.
- Open Access
Estimating the Aboveground Fresh Weight of Sugarcane Using Multispectral Images and Light Detection and Ranging (LiDAR)
This study aimed to develop a remote sensing method for estimating the aboveground fresh weight (AGFW) of sugarcane using multispectral images and light detection and ranging (LiDAR). Remotely sensed data were acquired from an unmanned aerial vehicle (drone). Sample plots were harvested and the AGFW of each plot was measured. Sugarcane crown heights and volumes were obtained by isolating individual tree crowns using a LiDAR-derived digital surface model of the area. Multiple linear regression (MLR) and partial least-squares regression (PLSR) models were tested for the field-sampled AGFWs (dependent variable) and individual canopy heights and volumes, and spectral indices were used as independent variables or predictors. The PLSR model showed more promising results than the MLR model when predicting the AGFW over the study area. Although PLSR is well-suited to a large number of collinear predictor variables and a limited number of field samples, this study showed moderate results (R2 = 0.5). The visual appearance of the spatial distribution of the AGFW map is satisfactory. The limited no. of field samples overfitted the MLR prediction results. Overall, this research highlights the potential of integrating remote sensing technologies in the sugarcane industry, thereby improving yield estimation and effective crop management.
Open AccessEstimating the Aboveground Fresh Weight of Sugarcane Using Multispectral Images and Light Detection and Ranging (LiDAR)
This study aimed to develop a remote sensing method for estimating the aboveground fresh weight (AGFW) of sugarcane using multispectral images and light detection and ranging (LiDAR). Remotely sensed data were acquired from an unmanned aerial vehicle (drone). Sample plots were harvested and the AGFW of each plot was measured. Sugarcane crown heights and volumes were obtained by isolating individual tree crowns using a LiDAR-derived digital surface model of the area. Multiple linear regression (MLR) and partial least-squares regression (PLSR) models were tested for the field-sampled AGFWs (dependent variable) and individual canopy heights and volumes, and spectral indices were used as independent variables or predictors. The PLSR model showed more promising results than the MLR model when predicting the AGFW over the study area. Although PLSR is well-suited to a large number of collinear predictor variables and a limited number of field samples, this study showed moderate results (R2 = 0.5). The visual appearance of the spatial distribution of the AGFW map is satisfactory. The limited no. of field samples overfitted the MLR prediction results. Overall, this research highlights the potential of integrating remote sensing technologies in the sugarcane industry, thereby improving yield estimation and effective crop management.