D. E. Kramsakov
Research Subjects
D. E. Kramsakov has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Ivan Stolpovskikh
Satpayev University
4 shared publications - Sergey Kuzmin
Rudny Industrial University
4 shared publications - Sergey Melentyev
Rudny Industrial University
2 shared publications - Aleksander Sładkowski
Silesian University of Technology
1 shared publication - Anatoly D. Kolga
Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia
1 shared publication - Assem Utegenova
Institute of Energy and Mechanical Engineering Named after A. Burkitbayev, Department of Technological Machines and Gas Turbine Installations, Satbayev University, Almaty 050013, Kazakhstan
1 shared publication
Latest Publications
- Open Access
- 31 July 2025
- Published by Interrin Scientific and Production Enterprise LLP in Горный журнал Казахстана
- No. 7(243),p. 47-54
INVESTIGATION OF VELOCITY MODES OF LIQUID FLOWS AROUND ELECTRIC MOTORS OF SUBMERSIBLE PUMPS
Water supply and wastewater disposal are among the industries with intensive use of pumping equipment, the share of electricity consumed by pumps is more than 50% of the total energy consumption. One of the reasons for the decrease in technical and economic indicators of submersible pumping units is the failure of pump motors due to overheating during their operation. In this regard, the substantiation and development of methods of research and calculation of fl uid fl ow parameters around the pump motor, is an urgent scientifi c and practical task. The aim of the work is to provide conditions of stable cooling of pump motors at which the temperature of electric motor windings will be within permissible limits. To achieve this goal, the task of developing a methodology for modelling the turbulent vortex fl uid fl ow along the electric motor of a submersible pump is solved Сумен жабдықтау және су бұру сорғы жабдықтарын қарқынды пайдаланатын өнеркәсіп салаларына жатады, сорғылар тұтынатын электр энергиясының үлесі жалпы энергия тұтынудың 50%-дан астамын құрайды. Суасты сорғы қондырғылары жұмысының техникалық-экономикалық көрсеткіштерінің төмендеуінің себептерінің бірі сорғылардың Электр қозғалтқыштарының жұмыс процесінде қызып кетуіне байланысты істен шығуы болып табылады. Осыған байланысты сорғы қозғалтқышының айналасындағы сұйықтық ағынының параметрлерін зерттеу және есептеу әдістерін негіздеу және дамыту өзекті ғылыми және практикалық міндет болып табылады. Мақсатқа жету үшін суасты сорғысының электр қозғалтқышы бойымен сұйықтықтың турбулентті құйынды ағынын модельдеу әдісін әзірлеу міндеті шешілуде Водоснабжение и водоотведение относятся к отраслям промышленности с интенсивным использованием насосного оборудования, доля электроэнергии, потребляемой насосами, составляет более 50% от общего энергопотребления. Одной из причин снижения технико-экономических показателей работы погружных насосных установок является выход из строя электродвигателей насосов из-за перегрева в процессе их работы. В этой связи обоснование и развитие методов исследования и расчета параметров потока жидкости вокруг двигателя насоса является актуальной научной и практической задачей. Для достижения поставленной цели решается задача разработки методики моделирования турбулентного вихревого потока жидкости вдоль электродвигателя погружного насоса
- 31 July 2025
- Published by Interrin Scientific and Production Enterprise LLP in Горный журнал Казахстана
- No. 7(243),p. 47-54
Open AccessINVESTIGATION OF VELOCITY MODES OF LIQUID FLOWS AROUND ELECTRIC MOTORS OF SUBMERSIBLE PUMPS
Water supply and wastewater disposal are among the industries with intensive use of pumping equipment, the share of electricity consumed by pumps is more than 50% of the total energy consumption. One of the reasons for the decrease in technical and economic indicators of submersible pumping units is the failure of pump motors due to overheating during their operation. In this regard, the substantiation and development of methods of research and calculation of fl uid fl ow parameters around the pump motor, is an urgent scientifi c and practical task. The aim of the work is to provide conditions of stable cooling of pump motors at which the temperature of electric motor windings will be within permissible limits. To achieve this goal, the task of developing a methodology for modelling the turbulent vortex fl uid fl ow along the electric motor of a submersible pump is solved Сумен жабдықтау және су бұру сорғы жабдықтарын қарқынды пайдаланатын өнеркәсіп салаларына жатады, сорғылар тұтынатын электр энергиясының үлесі жалпы энергия тұтынудың 50%-дан астамын құрайды. Суасты сорғы қондырғылары жұмысының техникалық-экономикалық көрсеткіштерінің төмендеуінің себептерінің бірі сорғылардың Электр қозғалтқыштарының жұмыс процесінде қызып кетуіне байланысты істен шығуы болып табылады. Осыған байланысты сорғы қозғалтқышының айналасындағы сұйықтық ағынының параметрлерін зерттеу және есептеу әдістерін негіздеу және дамыту өзекті ғылыми және практикалық міндет болып табылады. Мақсатқа жету үшін суасты сорғысының электр қозғалтқышы бойымен сұйықтықтың турбулентті құйынды ағынын модельдеу әдісін әзірлеу міндеті шешілуде Водоснабжение и водоотведение относятся к отраслям промышленности с интенсивным использованием насосного оборудования, доля электроэнергии, потребляемой насосами, составляет более 50% от общего энергопотребления. Одной из причин снижения технико-экономических показателей работы погружных насосных установок является выход из строя электродвигателей насосов из-за перегрева в процессе их работы. В этой связи обоснование и развитие методов исследования и расчета параметров потока жидкости вокруг двигателя насоса является актуальной научной и практической задачей. Для достижения поставленной цели решается задача разработки методики моделирования турбулентного вихревого потока жидкости вдоль электродвигателя погружного насоса
- Open Access
- 4 March 2025
- Published by Innovative Research Publishing in International Journal of Innovative Research and Scientific Studies
- Vol. 8 (2) , 456-464
Logistics and environmental aspects of the formation of mining and transport systems of dump formation in deep pits using container technology
Improving the energy efficiency and environmental friendliness of waste disposal processes during open-pit mining of mineral deposits involves substantiating and developing a new mining and transport technology. Literary analysis combined with computer modeling based on the finite element method has made it possible to automate the work in designing container technology equipment at the design preparation stages. A new mining and transport system for waste disposal in deep quarries has been developed, which involves the use of container technology for moving rock mass in quarries, allowing for increased energy efficiency of transport systems and minimizing pollution of the quarry atmosphere. The proposed logistic scheme for transporting rock mass to dumps using container technology ensures the creation of a new energy-saving mining and transport system using quarry hoisting machines, which, in comparison with similar traditional systems, allows for a reduction in costs for lifting rock mass, a reduction in atmospheric gas pollution, and an improvement in mining modes. Container delivery of rock mass as a bulk and difficult-to-excavate material will allow for its single excavation and lifting from the quarry to the dump using quarry hoisting machines with a minimum tare coefficient.
- 4 March 2025
- Published by Innovative Research Publishing in International Journal of Innovative Research and Scientific Studies
- Vol. 8 (2) , 456-464
Open AccessLogistics and environmental aspects of the formation of mining and transport systems of dump formation in deep pits using container technology
Improving the energy efficiency and environmental friendliness of waste disposal processes during open-pit mining of mineral deposits involves substantiating and developing a new mining and transport technology. Literary analysis combined with computer modeling based on the finite element method has made it possible to automate the work in designing container technology equipment at the design preparation stages. A new mining and transport system for waste disposal in deep quarries has been developed, which involves the use of container technology for moving rock mass in quarries, allowing for increased energy efficiency of transport systems and minimizing pollution of the quarry atmosphere. The proposed logistic scheme for transporting rock mass to dumps using container technology ensures the creation of a new energy-saving mining and transport system using quarry hoisting machines, which, in comparison with similar traditional systems, allows for a reduction in costs for lifting rock mass, a reduction in atmospheric gas pollution, and an improvement in mining modes. Container delivery of rock mass as a bulk and difficult-to-excavate material will allow for its single excavation and lifting from the quarry to the dump using quarry hoisting machines with a minimum tare coefficient.
- Open Access
- 18 February 2025
- Published by Agrarian Science in Agrarian science
- No. 2,p. 150-158
The architecture of hydraulic drives for industrial, agricultural and mobile equipment with increased energy efficiency and functionality
Relevance. The article discusses the impact of hydraulic valves on the efficiency of the entire hydraulic drive system and the possibility of creating a hydraulic drive architecture based on two-line, two-position hydraulic valves (valves). It is noted that the current hydraulic drive architecture, built on the basis of spool multi—linear, multi-position valves, has large weight and size parameters, and most importantly, does not meet the requirements of energy efficiency. The authors see the solution to the problem of increasing the energy efficiency of a hydraulic drive in avoiding the use of complex, bulky, massive and energy-inefficient multi-line and multi-position valves and creating a hydraulic drive architecture based on two-line, two-position valves (valves 2/2). However, for such a transition, it is necessary to develop a new design of hydraulic valves that meets modern energy efficiency requirements.The purpose of the research is to substantiate the possibility of creating a hydraulic device architecture based on the simplest 2/2 valves.A task. Reduction of energy consumption and mass-dimensional parameters of hydrofected machines.Methods. The tasks were solved using the electrohydraulic analogy method, integrated into “Kompas3D” as an application of the FlowVision software package.The novelty lies in establishing the reasons for the high energy consumption of currently used hydraulic valves and the possibility of increasing the energy efficiency of hydraulic systems through the wider use of the simplest hydraulic elements valves (distributors 2/2).Results. The conducted studies confirm the possibility of increasing the energy efficiency of hydraulic systems and reducing the weight and size parameters of hydraulic machines.
- 18 February 2025
- Published by Agrarian Science in Agrarian science
- No. 2,p. 150-158
Open AccessThe architecture of hydraulic drives for industrial, agricultural and mobile equipment with increased energy efficiency and functionality
Relevance. The article discusses the impact of hydraulic valves on the efficiency of the entire hydraulic drive system and the possibility of creating a hydraulic drive architecture based on two-line, two-position hydraulic valves (valves). It is noted that the current hydraulic drive architecture, built on the basis of spool multi—linear, multi-position valves, has large weight and size parameters, and most importantly, does not meet the requirements of energy efficiency. The authors see the solution to the problem of increasing the energy efficiency of a hydraulic drive in avoiding the use of complex, bulky, massive and energy-inefficient multi-line and multi-position valves and creating a hydraulic drive architecture based on two-line, two-position valves (valves 2/2). However, for such a transition, it is necessary to develop a new design of hydraulic valves that meets modern energy efficiency requirements.The purpose of the research is to substantiate the possibility of creating a hydraulic device architecture based on the simplest 2/2 valves.A task. Reduction of energy consumption and mass-dimensional parameters of hydrofected machines.Methods. The tasks were solved using the electrohydraulic analogy method, integrated into “Kompas3D” as an application of the FlowVision software package.The novelty lies in establishing the reasons for the high energy consumption of currently used hydraulic valves and the possibility of increasing the energy efficiency of hydraulic systems through the wider use of the simplest hydraulic elements valves (distributors 2/2).Results. The conducted studies confirm the possibility of increasing the energy efficiency of hydraulic systems and reducing the weight and size parameters of hydraulic machines.
- 31 January 2025
- Published by Interrin Scientific and Production Enterprise LLP in Горный журнал Казахстана
- No. 1(237),p. 18-24
ОБОСНОВАНИЕ ПРИМЕНЕНИЯ КОНТЕЙНЕРНОЙ ТЕХНОЛОГИИ ПРИ ПЕРЕГРУЗКЕ ГОРНЫХ ПОРОД В КАРЬЕРАХ
В настоящее время при использовании на карьерах комбинированных видов транспорта процесс промежуточной перегрузки горной массы является неотъемлемой частью технологии производства. На перегрузочных складах рудных карьеров в настоящее время перегружается до 50-60% добываемой горной массы. В этой связи развитие методов исследования, обоснования и расчета параметров контейнерной технологии перегрузки горной массы на карьерах, обеспечивающей экономическую и производственную эффективность предприятия, является актуальной научной и практической задачей, имеющей отраслевое значение. В статье предлагаются новые возможности повышения эффективности эксплуатации перегрузочных пунктов горной массы в карьерах путем обоснования методики проектирования пунктов перегрузки руды, условий и параметров контейнерной технологии с использованием карьерной подъемной машины на базе драглайна ЭШ-13/50 Қазіргі уақытта карьерлерде көліктің аралас түрлерін пайдалану кезінде тау-кен массасын аралық қайта тиеу процесі өндіріс технологиясының құрамдас бөлігі болып табылады. Кен карьерлерінің ауыстырып тиеу қоймаларында қазылған тау-кен массасының 50-60%-ы қазіргі уақытта қайта тиеледі. Осыған байланысты карьерлерде тау-кен массасын қайта тиеу, кәсіпорын қызметінің экономикалық және өндірістік тиімділігін қамтамасыз ету үшін контейнерлік технология параметрлерін зерттеу, негіздеу және есептеу әдістерін жасау өндірістік маңызы бар өзекті ғылыми-тәжірибелік міндет болып табылады. Мақалада кенді тасымалдау пункттерін жобалау әдістемесін, ЭЖ-13/50 драглайн негізіндегі карьерлік жүк көтергіш машинаны пайдалана отырып, контейнерлік технологияның шарттары мен параметрлерін жобалау әдістемесін негіздеу арқылы карьерлердегі тау жыныстарын тасымалдау пункттерін пайдалану тиімділігін арттырудың жаңа мүмкіндіктері ұсынылған At present, when using combined types of transport in quarries, the process of intermediate reloading of rock mass is an integral part of the production technology. At the reloading warehouses of ore quarries, up to 50-60% of the mined rock mass is currently reloaded. In this regard, the development of methods for research, justification and calculation of parameters of container technology for handling rock mass in quarries, ensuring the economic and production efficiency of the enterprise, is a pressing scientific and practical task of industry significance. The article proposes new possibilities for increasing the efficiency of operation of rock mass transfer points in quarries by substantiating the design methodology for ore transfer points, conditions and parameters of container technology using a quarry hoist based on the WE-13/50 dragline
- 31 January 2025
- Published by Interrin Scientific and Production Enterprise LLP in Горный журнал Казахстана
- No. 1(237),p. 18-24
ОБОСНОВАНИЕ ПРИМЕНЕНИЯ КОНТЕЙНЕРНОЙ ТЕХНОЛОГИИ ПРИ ПЕРЕГРУЗКЕ ГОРНЫХ ПОРОД В КАРЬЕРАХ
В настоящее время при использовании на карьерах комбинированных видов транспорта процесс промежуточной перегрузки горной массы является неотъемлемой частью технологии производства. На перегрузочных складах рудных карьеров в настоящее время перегружается до 50-60% добываемой горной массы. В этой связи развитие методов исследования, обоснования и расчета параметров контейнерной технологии перегрузки горной массы на карьерах, обеспечивающей экономическую и производственную эффективность предприятия, является актуальной научной и практической задачей, имеющей отраслевое значение. В статье предлагаются новые возможности повышения эффективности эксплуатации перегрузочных пунктов горной массы в карьерах путем обоснования методики проектирования пунктов перегрузки руды, условий и параметров контейнерной технологии с использованием карьерной подъемной машины на базе драглайна ЭШ-13/50 Қазіргі уақытта карьерлерде көліктің аралас түрлерін пайдалану кезінде тау-кен массасын аралық қайта тиеу процесі өндіріс технологиясының құрамдас бөлігі болып табылады. Кен карьерлерінің ауыстырып тиеу қоймаларында қазылған тау-кен массасының 50-60%-ы қазіргі уақытта қайта тиеледі. Осыған байланысты карьерлерде тау-кен массасын қайта тиеу, кәсіпорын қызметінің экономикалық және өндірістік тиімділігін қамтамасыз ету үшін контейнерлік технология параметрлерін зерттеу, негіздеу және есептеу әдістерін жасау өндірістік маңызы бар өзекті ғылыми-тәжірибелік міндет болып табылады. Мақалада кенді тасымалдау пункттерін жобалау әдістемесін, ЭЖ-13/50 драглайн негізіндегі карьерлік жүк көтергіш машинаны пайдалана отырып, контейнерлік технологияның шарттары мен параметрлерін жобалау әдістемесін негіздеу арқылы карьерлердегі тау жыныстарын тасымалдау пункттерін пайдалану тиімділігін арттырудың жаңа мүмкіндіктері ұсынылған At present, when using combined types of transport in quarries, the process of intermediate reloading of rock mass is an integral part of the production technology. At the reloading warehouses of ore quarries, up to 50-60% of the mined rock mass is currently reloaded. In this regard, the development of methods for research, justification and calculation of parameters of container technology for handling rock mass in quarries, ensuring the economic and production efficiency of the enterprise, is a pressing scientific and practical task of industry significance. The article proposes new possibilities for increasing the efficiency of operation of rock mass transfer points in quarries by substantiating the design methodology for ore transfer points, conditions and parameters of container technology using a quarry hoist based on the WE-13/50 dragline
- 30 April 2024
- Published by Dnipro University of Technology in Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu
- No. 2,p. 38-44
Container technology for transporting rock masses in quarries
Purpose. To justify and develop the theoretical bases of the formation and operation of the container technology for moving mining mass from quarries, which ensures a reduction of economic and energy costs, as well as damage to the environment during the extraction of mineral resources. Methodology. The work used complex research methods, including analysis and scientific synthesis of scientific and technical information; theoretical research; methods of mathematical and computer modeling, and design developments. Findings. The analysis of existing technologies for open-pit mining and the current state of mining indicates an urgent need to develop new resource-saving technology and environmentally friendly technologies for moving rock mass for open-pit mining. A new technology for container transportation of rock mass in containers is proposed without the construction of additional transport communications in the quarry and has technological and energy-saving advantages. Originality. The scientific novelty of the research consists of an integrated and systematic approach to assessing the energy efficiency and environmental safety of the proposed set of equipment for container technology for transporting rock mass. Practical value. In this work, special attention is paid to the problem of the formation and effective use of a new resource-saving and environmentally friendly container technology for moving rock mass from deep quarries. These advantages are simultaneous excavation of rocks, transportation of rocks over the shortest distance, low container packing ratio, and mobility of a complex of lifting machines, which will reduce energy consumption and the cost of transporting rock mass. A transport complex has been developed to ensure the reliable operation of lifting and transport machines.
- 30 April 2024
- Published by Dnipro University of Technology in Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu
- No. 2,p. 38-44
Container technology for transporting rock masses in quarries
Purpose. To justify and develop the theoretical bases of the formation and operation of the container technology for moving mining mass from quarries, which ensures a reduction of economic and energy costs, as well as damage to the environment during the extraction of mineral resources. Methodology. The work used complex research methods, including analysis and scientific synthesis of scientific and technical information; theoretical research; methods of mathematical and computer modeling, and design developments. Findings. The analysis of existing technologies for open-pit mining and the current state of mining indicates an urgent need to develop new resource-saving technology and environmentally friendly technologies for moving rock mass for open-pit mining. A new technology for container transportation of rock mass in containers is proposed without the construction of additional transport communications in the quarry and has technological and energy-saving advantages. Originality. The scientific novelty of the research consists of an integrated and systematic approach to assessing the energy efficiency and environmental safety of the proposed set of equipment for container technology for transporting rock mass. Practical value. In this work, special attention is paid to the problem of the formation and effective use of a new resource-saving and environmentally friendly container technology for moving rock mass from deep quarries. These advantages are simultaneous excavation of rocks, transportation of rocks over the shortest distance, low container packing ratio, and mobility of a complex of lifting machines, which will reduce energy consumption and the cost of transporting rock mass. A transport complex has been developed to ensure the reliable operation of lifting and transport machines.
- 5 March 2024
- Published by Interrin Scientific and Production Enterprise LLP in Горный журнал Казахстана
- No. 2(226),p. 52-57
Карьер пункттерінің тау-көлік жүйелеріне қойылатын технологиялық талаптарды негіздеу
В статье исследуются проблемы повышения технологического и организационного уровня горно-транспортных систем карьеров, доля которых составляет около половины всех трудовых и стоимостных затрат по добыче полезных ископаемых. Целью данной работы является разработка теоретических основ технологических требований при выборе параметров горно-транспортных систем карьеров в увязке с типоразмерами машин. В работе использованы комплексные методы исследований, включающие анализ и научное обобщение научно-технической информации, теоретические исследования, методы математического и компьютерного моделирования и метод научной абстракции. Установлено, что в качестве определяющего признака при выборе стратегии технического и технологического переоснащения карьеров предлагается использовать высоту подъема и средневзвешенный продольный уклон дорог Мақалада карьерлердің тау-кен және көлік жүйелерінің технологиялық және ұйымдастырушылық деңгейін арттыру мәселелері қарастырылған, олардың үлесі тау-кен өндіруге жұмсалатын барлық еңбек және шығындардың жартысына жуығын құрайды. Бұл жұмыстың мақсаты машиналардың стандартты өлшемдеріне байланысты карьерлердің тау-кен және көлік жүйелерінің параметрлерін таңдау кезіндегі технологиялық талаптардың теориялық негіздерін жасау болып табылады. Жұмыста кешенді зерттеу әдістері, соның ішінде ғылыми-техникалық ақпаратты талдау және ғылыми синтездеу, теориялық зерттеулер, математикалық және компьютерлік модельдеу әдістері және ғылыми абстракция әдісі қолданылды. Карьерлерді техникалық және технологиялық қайта жарақтандыру стратегиясын таңдау кезінде анықтаушы белгі ретінде жолдардың көтеру биіктігін және орташа салмақты бойлық еңісін пайдалану ұсынылатыны анықталды The article examines the problems of increasing the technological and organizational level of mining and transport systems of quarries, the share of which accounts for about half of all labor and cost costs for mining. The purpose of this work is to develop the theoretical foundations of technological requirements when choosing the parameters of mining and transport systems of quarries in connection with the standard sizes of machines. The work used complex research methods, including analysis and scientific synthesis of scientific and technical information, theoretical research, methods of mathematical and computer modeling and the method of scientific abstraction. It has been established that it is proposed to use the lifting height and the weighted average longitudinal slope of roads as a determining feature when choosing a strategy for the technical and technological re-equipment of quarries
- 5 March 2024
- Published by Interrin Scientific and Production Enterprise LLP in Горный журнал Казахстана
- No. 2(226),p. 52-57
Карьер пункттерінің тау-көлік жүйелеріне қойылатын технологиялық талаптарды негіздеу
В статье исследуются проблемы повышения технологического и организационного уровня горно-транспортных систем карьеров, доля которых составляет около половины всех трудовых и стоимостных затрат по добыче полезных ископаемых. Целью данной работы является разработка теоретических основ технологических требований при выборе параметров горно-транспортных систем карьеров в увязке с типоразмерами машин. В работе использованы комплексные методы исследований, включающие анализ и научное обобщение научно-технической информации, теоретические исследования, методы математического и компьютерного моделирования и метод научной абстракции. Установлено, что в качестве определяющего признака при выборе стратегии технического и технологического переоснащения карьеров предлагается использовать высоту подъема и средневзвешенный продольный уклон дорог Мақалада карьерлердің тау-кен және көлік жүйелерінің технологиялық және ұйымдастырушылық деңгейін арттыру мәселелері қарастырылған, олардың үлесі тау-кен өндіруге жұмсалатын барлық еңбек және шығындардың жартысына жуығын құрайды. Бұл жұмыстың мақсаты машиналардың стандартты өлшемдеріне байланысты карьерлердің тау-кен және көлік жүйелерінің параметрлерін таңдау кезіндегі технологиялық талаптардың теориялық негіздерін жасау болып табылады. Жұмыста кешенді зерттеу әдістері, соның ішінде ғылыми-техникалық ақпаратты талдау және ғылыми синтездеу, теориялық зерттеулер, математикалық және компьютерлік модельдеу әдістері және ғылыми абстракция әдісі қолданылды. Карьерлерді техникалық және технологиялық қайта жарақтандыру стратегиясын таңдау кезінде анықтаушы белгі ретінде жолдардың көтеру биіктігін және орташа салмақты бойлық еңісін пайдалану ұсынылатыны анықталды The article examines the problems of increasing the technological and organizational level of mining and transport systems of quarries, the share of which accounts for about half of all labor and cost costs for mining. The purpose of this work is to develop the theoretical foundations of technological requirements when choosing the parameters of mining and transport systems of quarries in connection with the standard sizes of machines. The work used complex research methods, including analysis and scientific synthesis of scientific and technical information, theoretical research, methods of mathematical and computer modeling and the method of scientific abstraction. It has been established that it is proposed to use the lifting height and the weighted average longitudinal slope of roads as a determining feature when choosing a strategy for the technical and technological re-equipment of quarries