Caixia Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Caixia Wang has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
Jichao Wang
School of Marine Science and Technology, Northwestern Polytechnical University, 127 Youyi Road, Xian 710000 China; Ningbo Institute of NPU, 218 Qingyi Road, Ningbo 315100 China
2 shared publicationsJun-Fei Gu
State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, 122 Luoshi Road, Wuhan 430070 China
2 shared publications- Somboon Chaemchuen
Department of Chemical Engineering Faculty of Engineering Mahidol University Nakhon Pathom Thailand
2 shared publications - Cheng Chen
State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Wuhan P. R. China
1 shared publication - Cong Chen
National Science Library (Wuhan), Chinese Academy of Sciences, No. 25, Xiaohongshan West, Wuchang District, Wuhan 430071, China
1 shared publication - Francis Verpoort
State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan 430070, China
1 shared publication
Latest Publications
- Open Access
- 22 April 2026
- Published by MDPI AG in Sustainability
- Vol. 18 (9) , 4158
A Review of Thermochromic Materials for Passive Adaptive Solar Regulation in Buildings: Mechanisms, Performance and Applications
Thermochromic materials (TCMs) have attracted increasing attention as passive adaptive materials for solar regulation in buildings because they can reversibly change their optical properties in response to temperature without external energy input. Owing to this temperature-triggered optical modulation, they have been widely investigated for smart windows, temperature indicators, anti-counterfeiting labels, and flexible devices. In recent years, representative systems such as VO2-based materials, polymers, hydrogels, and organic–inorganic hybrids have shown steady progress, especially in transition-temperature tuning, spectral selectivity, and cycling stability. This review summarizes the main classes of TCMs as well as their color-changing mechanisms, preparation methods, and performance-regulation strategies, with an emphasis on building energy efficiency and passive solar regulation. Typical applications and current bottlenecks are also discussed, including response speed, durability, environmental compatibility, and large-scale manufacturing. Finally, several practical directions for future work are highlighted, particularly low-cost synthesis, multifunctional integration, and application-oriented material design.
- 22 April 2026
- Published by MDPI AG in Sustainability
- Vol. 18 (9) , 4158
Open AccessA Review of Thermochromic Materials for Passive Adaptive Solar Regulation in Buildings: Mechanisms, Performance and Applications
Thermochromic materials (TCMs) have attracted increasing attention as passive adaptive materials for solar regulation in buildings because they can reversibly change their optical properties in response to temperature without external energy input. Owing to this temperature-triggered optical modulation, they have been widely investigated for smart windows, temperature indicators, anti-counterfeiting labels, and flexible devices. In recent years, representative systems such as VO2-based materials, polymers, hydrogels, and organic–inorganic hybrids have shown steady progress, especially in transition-temperature tuning, spectral selectivity, and cycling stability. This review summarizes the main classes of TCMs as well as their color-changing mechanisms, preparation methods, and performance-regulation strategies, with an emphasis on building energy efficiency and passive solar regulation. Typical applications and current bottlenecks are also discussed, including response speed, durability, environmental compatibility, and large-scale manufacturing. Finally, several practical directions for future work are highlighted, particularly low-cost synthesis, multifunctional integration, and application-oriented material design.
- Open Access
Global Potential Map of Radiative Sky Cooling (RSC) Use in Pipe-Embedded Wall Systems
Radiative sky cooling can be effectively integrated with pipe-embedded wall systems to reduce building cooling loads. However, the energy-saving and carbon reduction potential of this technology varies according to climatic conditions and the method of integration, requiring quantification. To address this gap, a revised degree-hour method of evaluating energy efficiency for an integrated system is proposed and validated, and a global potential map is developed. The proposed method can be used to predict the energy-saving and carbon reduction potential of radiative sky coolers under different climatic conditions. Compared to physical model prediction methods, the revised degree-hour method is faster and more accurate, with an evaluation error of approximately 5%. The results indicate that the integrated system performs well in most regions with cooling demand. The system’s energy-saving potential is highest in cities in tropical savanna and desert climate zones, achieving energy savings of approximately 53.96 kWh/m2 and reducing carbon emissions by approximately 22.99 kgCO2/m2 during the cooling season. Its performance is reduced in subtropical monsoon zones, with savings of 8.36 kWh/m2 and 3.56 kgCO2/m2. Furthermore, the system’s energy-saving potential generally declines as the cold-water temperature of the radiative sky cooler increases, especially in tropical regions. This work provides a rapid assessment tool and global reference data to support low-energy building design.
Open AccessGlobal Potential Map of Radiative Sky Cooling (RSC) Use in Pipe-Embedded Wall Systems
Radiative sky cooling can be effectively integrated with pipe-embedded wall systems to reduce building cooling loads. However, the energy-saving and carbon reduction potential of this technology varies according to climatic conditions and the method of integration, requiring quantification. To address this gap, a revised degree-hour method of evaluating energy efficiency for an integrated system is proposed and validated, and a global potential map is developed. The proposed method can be used to predict the energy-saving and carbon reduction potential of radiative sky coolers under different climatic conditions. Compared to physical model prediction methods, the revised degree-hour method is faster and more accurate, with an evaluation error of approximately 5%. The results indicate that the integrated system performs well in most regions with cooling demand. The system’s energy-saving potential is highest in cities in tropical savanna and desert climate zones, achieving energy savings of approximately 53.96 kWh/m2 and reducing carbon emissions by approximately 22.99 kgCO2/m2 during the cooling season. Its performance is reduced in subtropical monsoon zones, with savings of 8.36 kWh/m2 and 3.56 kgCO2/m2. Furthermore, the system’s energy-saving potential generally declines as the cold-water temperature of the radiative sky cooler increases, especially in tropical regions. This work provides a rapid assessment tool and global reference data to support low-energy building design.
- 13 January 2025
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 684 (Pt 2) , 159-169
Two-dimensional ZIF-L derived dual Fe/FeNx sites for synergistic efficient oxygen reduction in alkaline and acid media
- 13 January 2025
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 684 (Pt 2) , 159-169
Two-dimensional ZIF-L derived dual Fe/FeNx sites for synergistic efficient oxygen reduction in alkaline and acid media
- 4 June 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 12 (27) , 16528-16536
A single-atom iron catalyst on hierarchical N-doped carbon for highly efficient oxygen reduction in Zn–air batteries
Single-atom iron electrocatalysts have emerged as up-and-coming alternatives to platinum-based catalysts for the oxygen reduction reaction. However, their further development has been impeded by complex fabrication procedures and limitations in long-term stability. This study developed a chemical vapor deposition approach for synthesizing an efficient iron single-atom electrocatalyst denoted as Fe-SA@NC, utilizing vaporized ferrocene to deposit on a hierarchical N-doped carbon derived from ZIF-8. The preparation process maintained the initial pore structure throughout the deposition process by utilizing a two-step pyrolysis, preventing the collapse or deformation of the pore structure and frameworks. The optimized catalyst exhibited an exceptional half-wave potential (0.932 V) and kinetic current density (28.38 mA cm−2 at 0.9 V vs. RHE), along with high turnover frequency (36.37 s−1) and mass activity (5.68 A mg−1), and remarkable long-term stability in an alkaline electrolyte, exceeding those of commercial Pt/C and most previously reported iron-based electrocatalysts. Moreover, it also demonstrated outstanding practicability in both liquid and solid Zn–air batteries. The formation of well-dispersed Fe–N4 with strong interaction on hierarchical N-doped carbon was verified in the correlation of the structural activity and the excellent performance of Fe-SA@NC. This work sheds some light on the facile synthesis of single-atom catalysts with effective efficiency and stability.
- 4 June 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 12 (27) , 16528-16536
A single-atom iron catalyst on hierarchical N-doped carbon for highly efficient oxygen reduction in Zn–air batteries
Single-atom iron electrocatalysts have emerged as up-and-coming alternatives to platinum-based catalysts for the oxygen reduction reaction. However, their further development has been impeded by complex fabrication procedures and limitations in long-term stability. This study developed a chemical vapor deposition approach for synthesizing an efficient iron single-atom electrocatalyst denoted as Fe-SA@NC, utilizing vaporized ferrocene to deposit on a hierarchical N-doped carbon derived from ZIF-8. The preparation process maintained the initial pore structure throughout the deposition process by utilizing a two-step pyrolysis, preventing the collapse or deformation of the pore structure and frameworks. The optimized catalyst exhibited an exceptional half-wave potential (0.932 V) and kinetic current density (28.38 mA cm−2 at 0.9 V vs. RHE), along with high turnover frequency (36.37 s−1) and mass activity (5.68 A mg−1), and remarkable long-term stability in an alkaline electrolyte, exceeding those of commercial Pt/C and most previously reported iron-based electrocatalysts. Moreover, it also demonstrated outstanding practicability in both liquid and solid Zn–air batteries. The formation of well-dispersed Fe–N4 with strong interaction on hierarchical N-doped carbon was verified in the correlation of the structural activity and the excellent performance of Fe-SA@NC. This work sheds some light on the facile synthesis of single-atom catalysts with effective efficiency and stability.