Dominik Vlaha
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Dominik Vlaha has a total of 68 co-authors. Here are the top co-authors by number of shared publications:
- Marie Genge
Department of Earth Sciences University of Hong Kong Hong Kong SAR China
3 shared publications Andrew V. Zuza
Nevada Bureau of Mines and Geology, University of Nevada, Reno, Nevada 89557, USA
2 shared publications- Andrew V. Zuza
Nevada Geosciences University of Nevada Reno NV USA
2 shared publications Christie Rowe
Evada Seismological Laboratory, University of Nevada, Reno, Nevada, USA
2 shared publicationsEt Al.
2 shared publications- Rich Koehler
Nevada Bureau of Mines and Geology, University of Nevada, Reno, Nevada, USA
2 shared publications
Latest Publications
- Open Access
- 2 July 2026
- Published by McGill University Library and Archives in Seismica
- Vol. 5 (2)
Impact of Mapper Experience and Data on the Quality of Geomorphic Fault Mapping
Mapping of potentially active faults is critical to characterizing earthquake processes and surface rupture hazard. Geologists map tectonic faults from remote sensing datasets by interpreting tectonic landforms formed during past earthquakes. However, evidence for faulting is often ambiguous, incomplete, and challenging to interpret. Conventional wisdom suggests that mapping skill improves with experience. In contrast, prior work has shown that experienced geologists can still miss faults and disagree on fault location. To test whether, when, and to what extent mapping improves with experience, we designed a repeat mapping experiment involving 23 participants, ranging from undergraduate students to senior professionals. Each participant created regional-scale fault maps using pre-earthquake remote sensing data and a systematic, geomorphology-based approach. While professionals slightly outperformed students, some graduate students produced similar quality maps, and all participants missed identifying tectonic landforms indicative of future ruptures. Using participant mapped fault data, we quantify inter-mapper epistemic uncertainty in fault location to be between 55 and 117 m. Our work gives insight into approaches to improve fault mapping and suggests that experience beyond a graduate student level does not significantly improve mapping results.
- 2 July 2026
- Published by McGill University Library and Archives in Seismica
- Vol. 5 (2)
Open AccessImpact of Mapper Experience and Data on the Quality of Geomorphic Fault Mapping
Mapping of potentially active faults is critical to characterizing earthquake processes and surface rupture hazard. Geologists map tectonic faults from remote sensing datasets by interpreting tectonic landforms formed during past earthquakes. However, evidence for faulting is often ambiguous, incomplete, and challenging to interpret. Conventional wisdom suggests that mapping skill improves with experience. In contrast, prior work has shown that experienced geologists can still miss faults and disagree on fault location. To test whether, when, and to what extent mapping improves with experience, we designed a repeat mapping experiment involving 23 participants, ranging from undergraduate students to senior professionals. Each participant created regional-scale fault maps using pre-earthquake remote sensing data and a systematic, geomorphology-based approach. While professionals slightly outperformed students, some graduate students produced similar quality maps, and all participants missed identifying tectonic landforms indicative of future ruptures. Using participant mapped fault data, we quantify inter-mapper epistemic uncertainty in fault location to be between 55 and 117 m. Our work gives insight into approaches to improve fault mapping and suggests that experience beyond a graduate student level does not significantly improve mapping results.
- 2 May 2026
- Published by American Geophysical Union (AGU) in Tectonics
- Vol. 45 (5)
Documenting Thrust‐Related Exhumation of the Avawatz Mountains, Southern California: Implications for the Kinematic History of the Eastern Terminus of the Garlock Fault
The left‐slip Garlock fault, southern California, is oblique to the right‐lateral Pacific‐North American plate boundaries, and its role in accommodating plate motion remains unresolved. The timing and kinematics of deformation within the Avawatz Mountains, located at the eastern tip of the Garlock fault, can help evaluate competing Garlock fault models. In this region, the east‐striking Garlock fault intersects the northwest‐striking right‐slip Southern Death Valley fault (SDVF). The Avawatz Mountains were constructed via late Cenozoic contractional deformation involving active thrust and/or oblique‐slip faults. Contrasting structural models suggest the Avawatz Mountains formed as a fault‐termination thrust belt at the eastern tip of the Garlock fault or as a transpressional restraining bend along the SDVF. We conducted geologic mapping, structural analysis, and low‐temperature thermochronology to test these models. Field observations show numerous subvertical west‐striking strike‐slip faults in the western portion of the range and a prominent west‐dipping reverse fault along the eastern rangefront. New zircon (U‐Th)/He thermochronology (ZHe) from a ∼1 km vertical transect in the hanging wall of a major east‐directed thrust suggests that exhumation initiated ca. 15 Ma. Based on the observed dip of the west‐dipping thrust, exhumation rates imply east‐directed horizontal shortening rates of 0.4–0.9 mm/yr across the Avawatz Mountains since the mid‐Miocene. These results are consistent with exhumation initiating in the middle Miocene (ca. 20–15 Ma), synchronous with the initiation of slip on the Garlock fault as a clockwise rotating bookshelf fault. The Avawatz Mountains reflect strain transfer from the left‐lateral Garlock fault to an east‐directed termination thrust system.
- 2 May 2026
- Published by American Geophysical Union (AGU) in Tectonics
- Vol. 45 (5)
Documenting Thrust‐Related Exhumation of the Avawatz Mountains, Southern California: Implications for the Kinematic History of the Eastern Terminus of the Garlock Fault
The left‐slip Garlock fault, southern California, is oblique to the right‐lateral Pacific‐North American plate boundaries, and its role in accommodating plate motion remains unresolved. The timing and kinematics of deformation within the Avawatz Mountains, located at the eastern tip of the Garlock fault, can help evaluate competing Garlock fault models. In this region, the east‐striking Garlock fault intersects the northwest‐striking right‐slip Southern Death Valley fault (SDVF). The Avawatz Mountains were constructed via late Cenozoic contractional deformation involving active thrust and/or oblique‐slip faults. Contrasting structural models suggest the Avawatz Mountains formed as a fault‐termination thrust belt at the eastern tip of the Garlock fault or as a transpressional restraining bend along the SDVF. We conducted geologic mapping, structural analysis, and low‐temperature thermochronology to test these models. Field observations show numerous subvertical west‐striking strike‐slip faults in the western portion of the range and a prominent west‐dipping reverse fault along the eastern rangefront. New zircon (U‐Th)/He thermochronology (ZHe) from a ∼1 km vertical transect in the hanging wall of a major east‐directed thrust suggests that exhumation initiated ca. 15 Ma. Based on the observed dip of the west‐dipping thrust, exhumation rates imply east‐directed horizontal shortening rates of 0.4–0.9 mm/yr across the Avawatz Mountains since the mid‐Miocene. These results are consistent with exhumation initiating in the middle Miocene (ca. 20–15 Ma), synchronous with the initiation of slip on the Garlock fault as a clockwise rotating bookshelf fault. The Avawatz Mountains reflect strain transfer from the left‐lateral Garlock fault to an east‐directed termination thrust system.
- 4 December 2025
- Published by Geological Society of America in Geosphere
- Vol. 22 (1) , 152-173
Optimizing methods for Raman spectroscopy of carbonaceous material thermometry: Best practices to develop high-fidelity thermal constraints for tectonic studies
There is a variety of published sample preparation and data acquisition techniques for Raman spectroscopy of carbonaceous material (RSCM) thermometry, which complicates systematic evaluation, assessment, and comparison of RSCM thermometry datasets. In particular, many modern studies are applying large-n RSCM analyses, acquiring high numbers of RSCM temperature estimates, often systematically distributed along transects, to quantify regional thermal structure or spatial temperature gradients associated with geologic structures. Given the significance of RSCM analyses to address numerous geologic questions in a variety of tectonic settings, it becomes imperative to develop a reproducible, standardized, and optimized workflow for RSCM analyses. Here, we introduce and test protocols for RSCM analyses using samples from the Papoose Flat pluton contact aureole, eastern California, western United States, to determine the reproducibility of automated peak-fitting and RSCM temperature estimation programs. Our RSCM results align with previously estimated temperatures derived from calcite-dolomite isotope exchange thermometry, phase equilibria temperature estimates, and quartz c-axis fabric opening-angle thermometry. Temperature estimates derived from two automated peak-fitting programs (i.e., Iterative Fitting of Raman Spectra software [IFORS] and AutoRaman_K2024) are comparable within analytical error. The RSCM temperature estimates were further validated with simple thermal modeling of pluton heat diffusion. Based on these data, we tested sample preparation and data acquisition parameters to optimize large-n workflows. Coupling large datasets at multiple structural levels with supplementary thermal models of varying complexity allows RSCM thermometry to serve as a robust method for tectonic studies.
- 4 December 2025
- Published by Geological Society of America in Geosphere
- Vol. 22 (1) , 152-173
Optimizing methods for Raman spectroscopy of carbonaceous material thermometry: Best practices to develop high-fidelity thermal constraints for tectonic studies
There is a variety of published sample preparation and data acquisition techniques for Raman spectroscopy of carbonaceous material (RSCM) thermometry, which complicates systematic evaluation, assessment, and comparison of RSCM thermometry datasets. In particular, many modern studies are applying large-n RSCM analyses, acquiring high numbers of RSCM temperature estimates, often systematically distributed along transects, to quantify regional thermal structure or spatial temperature gradients associated with geologic structures. Given the significance of RSCM analyses to address numerous geologic questions in a variety of tectonic settings, it becomes imperative to develop a reproducible, standardized, and optimized workflow for RSCM analyses. Here, we introduce and test protocols for RSCM analyses using samples from the Papoose Flat pluton contact aureole, eastern California, western United States, to determine the reproducibility of automated peak-fitting and RSCM temperature estimation programs. Our RSCM results align with previously estimated temperatures derived from calcite-dolomite isotope exchange thermometry, phase equilibria temperature estimates, and quartz c-axis fabric opening-angle thermometry. Temperature estimates derived from two automated peak-fitting programs (i.e., Iterative Fitting of Raman Spectra software [IFORS] and AutoRaman_K2024) are comparable within analytical error. The RSCM temperature estimates were further validated with simple thermal modeling of pluton heat diffusion. Based on these data, we tested sample preparation and data acquisition parameters to optimize large-n workflows. Coupling large datasets at multiple structural levels with supplementary thermal models of varying complexity allows RSCM thermometry to serve as a robust method for tectonic studies.
- Open Access
- 5 November 2025
- Published by Geological Society of America
Supplemental Material: Optimizing methods for Raman spectroscopy of carbonaceous material thermometry: Best practices to develop high-fidelity thermal constraints for tectonic studies
Data tables include: (1) compilation of temperature data across the Papoose Flat pluton, (2) IFORS raw data, and (3) K2024 raw data. Figure S1. Supplemental Text S1.
- 5 November 2025
- Published by Geological Society of America
Open AccessSupplemental Material: Optimizing methods for Raman spectroscopy of carbonaceous material thermometry: Best practices to develop high-fidelity thermal constraints for tectonic studies
Data tables include: (1) compilation of temperature data across the Papoose Flat pluton, (2) IFORS raw data, and (3) K2024 raw data. Figure S1. Supplemental Text S1.
- Open Access
- 5 November 2025
- Published by Geological Society of America
Supplemental Material: Optimizing methods for Raman spectroscopy of carbonaceous material thermometry: Best practices to develop high-fidelity thermal constraints for tectonic studies
Data tables include: (1) compilation of temperature data across the Papoose Flat pluton, (2) IFORS raw data, and (3) K2024 raw data. Figure S1. Supplemental Text S1.
- 5 November 2025
- Published by Geological Society of America
Open AccessSupplemental Material: Optimizing methods for Raman spectroscopy of carbonaceous material thermometry: Best practices to develop high-fidelity thermal constraints for tectonic studies
Data tables include: (1) compilation of temperature data across the Papoose Flat pluton, (2) IFORS raw data, and (3) K2024 raw data. Figure S1. Supplemental Text S1.
- 27 October 2025
- Published by American Geophysical Union (AGU) in Tectonics
- Vol. 44 (10)
Apatite (U‐Th)/He Thermochronometry Along the Sutlej River, NW India Himalaya: Pleistocene River Capture Events Accelerated River Anticline Development
River capture events may create short‐term pulses of incision in orogenic settings, complicating the interpretation of tectonic and climatic influences on exhumation patterns. The Sutlej River in northwestern India offers a compelling case study, as recent exhumation has been linked primarily to tectonic and climatic factors, whereas the capture of the Zhada Basin has been identified at <1 Ma. This region also features active faults and a river anticline formed by rapid river incision. The integration of new (U‐Th)/He data, inverse modeling and a geomorphic analysis has revealed two recent episodes of rapid exhumation along the river anticline: (a) a 0.8–0.3 Ma pulse coinciding with the capture of the Zhada Basin, which is associated with a 2‐ to 3‐fold increase in exhumation rates in the river anticline region, and (b) a 2–1 Ma pulse linked to the potential capture of the Pare Chu River, another major tributary of the Sutlej River. Our findings suggest that these Pleistocene river capture events both led to increased exhumation downstream along the river anticline, a region susceptible to rapid exhumation via ongoing deformation and a warm weak crust. Thus, this study emphasizes how erosional perturbations, triggered by changes in drainage systems, can significantly impact topography, local exhumation patterns, and deformation dynamics during <1 Myr time periods.
- 27 October 2025
- Published by American Geophysical Union (AGU) in Tectonics
- Vol. 44 (10)
Apatite (U‐Th)/He Thermochronometry Along the Sutlej River, NW India Himalaya: Pleistocene River Capture Events Accelerated River Anticline Development
River capture events may create short‐term pulses of incision in orogenic settings, complicating the interpretation of tectonic and climatic influences on exhumation patterns. The Sutlej River in northwestern India offers a compelling case study, as recent exhumation has been linked primarily to tectonic and climatic factors, whereas the capture of the Zhada Basin has been identified at <1 Ma. This region also features active faults and a river anticline formed by rapid river incision. The integration of new (U‐Th)/He data, inverse modeling and a geomorphic analysis has revealed two recent episodes of rapid exhumation along the river anticline: (a) a 0.8–0.3 Ma pulse coinciding with the capture of the Zhada Basin, which is associated with a 2‐ to 3‐fold increase in exhumation rates in the river anticline region, and (b) a 2–1 Ma pulse linked to the potential capture of the Pare Chu River, another major tributary of the Sutlej River. Our findings suggest that these Pleistocene river capture events both led to increased exhumation downstream along the river anticline, a region susceptible to rapid exhumation via ongoing deformation and a warm weak crust. Thus, this study emphasizes how erosional perturbations, triggered by changes in drainage systems, can significantly impact topography, local exhumation patterns, and deformation dynamics during <1 Myr time periods.
- Open Access
- 8 July 2025
- Published by McGill University Library and Archives in Seismica
- Vol. 4 (2)
The 09 December 2024 Mw5.7 Parker Butte Earthquake: Orthogonal surface fracturing and associated ground disturbances near Yerington, Nevada, central Walker Lane
The Mw5.7 Parker Butte earthquake occurred on 09 December, 2024, ~24 km NNE of Yerington (western Nevada, USA) due to sinistral slip on an unmapped ENE-striking fault. Field reconnaissance and a drone survey were conducted within <1-8 days and ~1 month, respectively, after the earthquake. We observed a lack of surface rupture above the ENE-striking plane of the mainshock and most aftershocks, as well as surface fracturing along a NW-trending lineament orthogonal to the mainshock. Shaking effects included minor sediment failures, liquefaction features, and short-lived fracturing and refreezing features in ice on the Walker River and agricultural channels. Damage to infrastructure was minimal, only settlement and cracking of one bridge abutment fill prism. We estimate ground motions of up to 0.4 g and 23 cm/s. These observations provide valuable data about the effects of moderate magnitude earthquakes and highlight the importance of coordinated multidisciplinary geodetic, seismologic, and field geologic responses. The orthogonal faults indicated by the mainshock and the secondary surface fractures are part of a pattern in the region, where orthogonal faults have slipped in several historical earthquake sequences, establishing this as a common style of faulting within the complex network of faults that comprise the Walker Lane.
- 8 July 2025
- Published by McGill University Library and Archives in Seismica
- Vol. 4 (2)
Open AccessThe 09 December 2024 Mw5.7 Parker Butte Earthquake: Orthogonal surface fracturing and associated ground disturbances near Yerington, Nevada, central Walker Lane
The Mw5.7 Parker Butte earthquake occurred on 09 December, 2024, ~24 km NNE of Yerington (western Nevada, USA) due to sinistral slip on an unmapped ENE-striking fault. Field reconnaissance and a drone survey were conducted within <1-8 days and ~1 month, respectively, after the earthquake. We observed a lack of surface rupture above the ENE-striking plane of the mainshock and most aftershocks, as well as surface fracturing along a NW-trending lineament orthogonal to the mainshock. Shaking effects included minor sediment failures, liquefaction features, and short-lived fracturing and refreezing features in ice on the Walker River and agricultural channels. Damage to infrastructure was minimal, only settlement and cracking of one bridge abutment fill prism. We estimate ground motions of up to 0.4 g and 23 cm/s. These observations provide valuable data about the effects of moderate magnitude earthquakes and highlight the importance of coordinated multidisciplinary geodetic, seismologic, and field geologic responses. The orthogonal faults indicated by the mainshock and the secondary surface fractures are part of a pattern in the region, where orthogonal faults have slipped in several historical earthquake sequences, establishing this as a common style of faulting within the complex network of faults that comprise the Walker Lane.
- Open Access
- 18 March 2025
- Published by Copernicus GmbH
Mid-crustal overpressure in the Tethyan Himalaya
Theory suggests the possibility for significant deviations between total pressure (or dynamic pressure) and lithostatic pressure during crustal metamorphism. If such deviations exist, the implications for orogenic reconstruction would be profound. Whether such non-lithostatic pressure conditions during crustal metamorphism are recorded and preserved in the rock record remains unresolved, as direct field evidence for this phenomenon is limited. Here, we investigate the Paleogene Tethyan Himalaya fold-thrust belt in Himachal Pradesh, northwestern India, which is the structurally highest part of the Himalayan orogen and deforms a ~10–15 km thick Neoproterozoic–Cretaceous passive margin stratigraphic section. Field-based kinematic studies demonstrate relatively moderate shortening strain across the Tethyan Himalaya. However, basal Tethyan strata consistently yield elevated pressure-temperature-time (P-T-t) estimates of 7–8 kbar and ~650°C, indicative of deep burial during Himalayan orogeny (ca. 20–45 Ma, 25–30 km depths). These P-T-t conditions can be reconciled by: (1) deep Cenozoic burial along cryptic structures and/or significant flattening of the Tethyan strata; (2) basal Tethyan strata recording metamorphism and deformation related to pre-Himalayan tectonism; or (3) non-lithostatic pressure conditions (i.e., tectonic overpressure). To test these models, we systematically mapped the Tethyan fold-thrust belt along the Pin Valley transect in northwestern India, a classic site for stratigraphic, paleontological, paleoenvironmental, and structural reconstructions. The Pin Valley region provides an opportunity to study a structurally continuous metamorphic field gradient from the near-surface to structural depths between 10–15 km, which should reflect P conditions ≤4 kbar if lithostatic. We integrate a multi-method approach combining detailed geologic mapping with quantitative analytical techniques (e.g., thermometry, finite strain analyses, thermo/geochronology, and thermobarometry) to quantify the magnitude, kinematics, thermal architecture, and timing of regional deformation, metamorphism, and subsequent exhumation. Results show: (1) throw on shortening structures is moderate to low (≤4 km); (2) temperature-depth relationships record a continuous, but regionally elevated, upper-crustal geothermal gradient of ≥40 °C/km, which is inconsistent with deep burial models (≤25 °C/km); (3) minimal flattening of basal Tethyan strata; (4) upper Tethyan strata yield pre-Himalayan low-temperature thermochronology dates, further refuting deep Cenozoic burial; and (5) basal Tethyan P-T-t estimates confirm elevated mid-crustal conditions of ~7 kbar, 630°C at 10–15 km depths during the Cenozoic. Preliminary volume expansion calculations are minimal; therefore, mechanisms involving non-hydrostatic thermodynamics, deviatoric stresses, rock strength contrasts, and tectonic mode switching are being explored.
- 18 March 2025
- Published by Copernicus GmbH
Open AccessMid-crustal overpressure in the Tethyan Himalaya
Theory suggests the possibility for significant deviations between total pressure (or dynamic pressure) and lithostatic pressure during crustal metamorphism. If such deviations exist, the implications for orogenic reconstruction would be profound. Whether such non-lithostatic pressure conditions during crustal metamorphism are recorded and preserved in the rock record remains unresolved, as direct field evidence for this phenomenon is limited. Here, we investigate the Paleogene Tethyan Himalaya fold-thrust belt in Himachal Pradesh, northwestern India, which is the structurally highest part of the Himalayan orogen and deforms a ~10–15 km thick Neoproterozoic–Cretaceous passive margin stratigraphic section. Field-based kinematic studies demonstrate relatively moderate shortening strain across the Tethyan Himalaya. However, basal Tethyan strata consistently yield elevated pressure-temperature-time (P-T-t) estimates of 7–8 kbar and ~650°C, indicative of deep burial during Himalayan orogeny (ca. 20–45 Ma, 25–30 km depths). These P-T-t conditions can be reconciled by: (1) deep Cenozoic burial along cryptic structures and/or significant flattening of the Tethyan strata; (2) basal Tethyan strata recording metamorphism and deformation related to pre-Himalayan tectonism; or (3) non-lithostatic pressure conditions (i.e., tectonic overpressure). To test these models, we systematically mapped the Tethyan fold-thrust belt along the Pin Valley transect in northwestern India, a classic site for stratigraphic, paleontological, paleoenvironmental, and structural reconstructions. The Pin Valley region provides an opportunity to study a structurally continuous metamorphic field gradient from the near-surface to structural depths between 10–15 km, which should reflect P conditions ≤4 kbar if lithostatic. We integrate a multi-method approach combining detailed geologic mapping with quantitative analytical techniques (e.g., thermometry, finite strain analyses, thermo/geochronology, and thermobarometry) to quantify the magnitude, kinematics, thermal architecture, and timing of regional deformation, metamorphism, and subsequent exhumation. Results show: (1) throw on shortening structures is moderate to low (≤4 km); (2) temperature-depth relationships record a continuous, but regionally elevated, upper-crustal geothermal gradient of ≥40 °C/km, which is inconsistent with deep burial models (≤25 °C/km); (3) minimal flattening of basal Tethyan strata; (4) upper Tethyan strata yield pre-Himalayan low-temperature thermochronology dates, further refuting deep Cenozoic burial; and (5) basal Tethyan P-T-t estimates confirm elevated mid-crustal conditions of ~7 kbar, 630°C at 10–15 km depths during the Cenozoic. Preliminary volume expansion calculations are minimal; therefore, mechanisms involving non-hydrostatic thermodynamics, deviatoric stresses, rock strength contrasts, and tectonic mode switching are being explored.
- Open Access
- 20 January 2025
- Published by Copernicus GmbH
Unraveling rapid exhumation: Insights into the increase of exhumation rates in the Sutlej River anticline (NW Indian Himalaya) over the last 200 kyr.
Estimating exhumation rates on Pleistocene-Holocene time scales presents a challenge due to the scarcity of suitable low-temperature thermochronometers. Apatite helium (AHe) dating is unable to precisely differentiate cooling ages
- 20 January 2025
- Published by Copernicus GmbH
Open AccessUnraveling rapid exhumation: Insights into the increase of exhumation rates in the Sutlej River anticline (NW Indian Himalaya) over the last 200 kyr.
Estimating exhumation rates on Pleistocene-Holocene time scales presents a challenge due to the scarcity of suitable low-temperature thermochronometers. Apatite helium (AHe) dating is unable to precisely differentiate cooling ages
- Open Access
- 4 May 2024
- Published by Springer Nature in Nature Communications
- Vol. 15 (1) , 1-9
Hot Cordilleran hinterland promoted lower crust mobility and decoupling of Laramide deformation
The Late Cretaceous to Paleogene Laramide orogen in the North American Cordillera involved deformation >1,000 km from the plate margin that has been attributed to either plate-boundary end loading or basal traction exerted on the upper plate from the subducted Farallon flat slab. Prevailing tectonic models fail to explain the relative absence of Laramide-aged (ca. 90–60 Ma) contractional deformation within the Cordillera hinterland. Based on Raman spectroscopy of carbonaceous material thermometry and literature data from the restored upper 15–20 km of the Cordilleran crust we reconstruct the Late Cretaceous thermal architecture of the hinterland. Interpolation of compiled temperature data (n = 200) through a vertical crustal column reveals that the hinterland experienced a continuous but regionally elevated, upper-crustal geothermal gradient of >40 °C/km during Laramide orogenesis, consistent with peak metamorphic conditions and synchronous peraluminous granitic plutonism. The hot and partially melted hinterland promoted lower crust mobility and crust-mantle decoupling during flat-slab traction.
- 4 May 2024
- Published by Springer Nature in Nature Communications
- Vol. 15 (1) , 1-9
Open AccessHot Cordilleran hinterland promoted lower crust mobility and decoupling of Laramide deformation
The Late Cretaceous to Paleogene Laramide orogen in the North American Cordillera involved deformation >1,000 km from the plate margin that has been attributed to either plate-boundary end loading or basal traction exerted on the upper plate from the subducted Farallon flat slab. Prevailing tectonic models fail to explain the relative absence of Laramide-aged (ca. 90–60 Ma) contractional deformation within the Cordillera hinterland. Based on Raman spectroscopy of carbonaceous material thermometry and literature data from the restored upper 15–20 km of the Cordilleran crust we reconstruct the Late Cretaceous thermal architecture of the hinterland. Interpolation of compiled temperature data (n = 200) through a vertical crustal column reveals that the hinterland experienced a continuous but regionally elevated, upper-crustal geothermal gradient of >40 °C/km during Laramide orogenesis, consistent with peak metamorphic conditions and synchronous peraluminous granitic plutonism. The hot and partially melted hinterland promoted lower crust mobility and crust-mantle decoupling during flat-slab traction.