Bo Li

Ocean Thermal Energy Conversion (OTEC) is characterized by its abundant reserves and pollution-free nature, enabling stable power generation around the clock. Since the power output of an OTEC system is significantly influenced by the energy available from cold and warm seawater, the accurate evaluation of the outlet temperature of the cold-water pipe (CWP) is crucial. To analyze the heat transfer performance of the CWP, this paper investigates the temperature field of the OTEC CWP and employs numerical simulation methods to conduct finite element analysis of the temperature field under different discharge conditions. The results indicate that during the pumping of deep-sea cold water through the CWP, heat is absorbed from the warmer upper seawater layers. When the pumping discharge rate is higher, the shorter fluid residence time due to higher flow velocity results in a lower outlet temperature. Compared to steel CWPs, high-density polyethylene (HDPE) is more suitable for OTEC systems due to its lower thermal conductivity and density.

The degree and amount of sand production in hydrate reservoirs is related to the selection of stable production processes, but there is currently a lack of quantitative sand production prediction research using real logging data and formation samples from hydrate reservoirs. To reveal the dynamic change characteristics of in-situ reservoirs during hydrate decomposition, and explore quantitative prediction methods for guiding production practice, it is conducted a series of numerical simulations and quantitative prediction experiments. The numerical simulations are carried out using different sand-out prediction methods by using hydrate logging data during drilling, while quantitative prediction experiments of water production and sand-out are carried out based on in-situ reservoir samples. Our experiments indicate that hydrate mining is facing a serious risk of sand-out. The particle transport in the reservoir changes from “large-channel seepage” to “umbrella seepage” and then to “uniform fine flow” as the replacement flow rate decreases. A quantitative prediction model for water and sand production is also established. As a result, our study can provide support for the advancement of technology for long-term stable production and sand control of hydrates, laying the groundwork for developing a stable production plan for natural gas hydrates in offshore areas and determining the optimal depressurisation method.

Traditional suction anchor technology is mainly used in the fields of subsea structure bearing foundations, single-point mooring systems and offshore wind power. It is characterized by providing sufficient lateral and vertical bearing capacities and lateral bending moment. The anchor structure of a traditional suction anchor structure is improved with wellhead suction anchor technology, where a central pipe is added as a channel for drilling and completion operations. To solve the technical problems of a low wellhead bearing capacity, shallow built-up depth, and limited application of conductor jetting in the second production test of natural gas hydrates (NGHs) in the South China Sea (SCS), the China Geological Survey (CGS) took the lead in independently designing and manufacturing a wellhead suction anchor, which fulfilled the requirements of the production test. This novel anchor was successfully implemented in the second production test for the first time, providing a stable wellhead foundation for the success of the second production test of NGHs in the SCS.