Ruixin Bao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ruixin Bao has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
Jia Li
2 shared publicationsXiangguang Sun
2 shared publicationsFangzhou Zhou
Northeast Natural Gas Sales Center of Sinopec Natural Gas Branch
1 shared publication- Fen Lin
College of Energy and Power Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China
1 shared publication Guiyang Ma
1 shared publicationHongliang Wang
College of Mechanical Engineering, Liaoning Petrochemical University, Fushun City, Liaoning Province, People’s Republic of China
1 shared publication
Latest Publications
- 9 March 2026
- Published by IOP Publishing in Engineering Research Express
- Vol. 8 (6)
Mechanical Responses of Dual-Line Buried X80 Pipelines Subjected to Rockfall Impact
With the continuous rise in global oil and natural gas consumption, the scale and mileage of long-distance oil and gas pipeline construction continue to expand. The volume of pipelines laid across complex mountainous terrain is steadily increasing. However, such areas frequently experience rockfall disasters, which can impact pipelines and increase the risk of failure for buried pipelines. This study systematically analyzed the dynamic response and failure behavior of dual-line X80 buried pipelines subjected to rockfall impacts. A three-dimensional finite element model simulating rock-soil-pipeline interactions was developed using the ABAQUS/Explicit module. The investigation focused on the effects of rock diameter, impact velocity, and impact location on the mechanical behavior and failure modes of the dual-line pipeline. Results indicated that the axial strain distribution in the impacted pipeline (pipeline-1) exhibited tensile stress in the central region and compressive stress on both sides. The impact force time history curve shows a four-stage evolution pattern, with the maximum inertial impact force reaching 805.3 kN, which is the primary factor causing local buckling failure of the pipeline. Due to stress wave propagation in the soil, the adjacent pipeline (pipeline-2) exhibited maximum compressive strain concentrated at the 225° azimuth. As boulder diameter and impact velocity increased, the damage severity and affected area of pipeline-1 significantly intensified. The influence of impact location was jointly regulated by three factors: “force conversion efficiency,” “distance attenuation effect,” and “differences in soil confinement,” with force conversion efficiency playing a dominant role. This study provided theoretical support for the impact-resistant design and safety assessment of dual-line buried X80 oil and gas pipelines in utility tunnels.
- 9 March 2026
- Published by IOP Publishing in Engineering Research Express
- Vol. 8 (6)
Mechanical Responses of Dual-Line Buried X80 Pipelines Subjected to Rockfall Impact
With the continuous rise in global oil and natural gas consumption, the scale and mileage of long-distance oil and gas pipeline construction continue to expand. The volume of pipelines laid across complex mountainous terrain is steadily increasing. However, such areas frequently experience rockfall disasters, which can impact pipelines and increase the risk of failure for buried pipelines. This study systematically analyzed the dynamic response and failure behavior of dual-line X80 buried pipelines subjected to rockfall impacts. A three-dimensional finite element model simulating rock-soil-pipeline interactions was developed using the ABAQUS/Explicit module. The investigation focused on the effects of rock diameter, impact velocity, and impact location on the mechanical behavior and failure modes of the dual-line pipeline. Results indicated that the axial strain distribution in the impacted pipeline (pipeline-1) exhibited tensile stress in the central region and compressive stress on both sides. The impact force time history curve shows a four-stage evolution pattern, with the maximum inertial impact force reaching 805.3 kN, which is the primary factor causing local buckling failure of the pipeline. Due to stress wave propagation in the soil, the adjacent pipeline (pipeline-2) exhibited maximum compressive strain concentrated at the 225° azimuth. As boulder diameter and impact velocity increased, the damage severity and affected area of pipeline-1 significantly intensified. The influence of impact location was jointly regulated by three factors: “force conversion efficiency,” “distance attenuation effect,” and “differences in soil confinement,” with force conversion efficiency playing a dominant role. This study provided theoretical support for the impact-resistant design and safety assessment of dual-line buried X80 oil and gas pipelines in utility tunnels.
- Open Access
- 1 January 2026
- Published by KEAI Publishing in Journal of Pipeline Science and Engineering
- Vol. 6 (1)
Modeling and simulation analysis of bi-directional PIG based on the pseudo-rigid body model
- 1 January 2026
- Published by KEAI Publishing in Journal of Pipeline Science and Engineering
- Vol. 6 (1)
Open AccessModeling and simulation analysis of bi-directional PIG based on the pseudo-rigid body model
- 1 August 2025
- Published by American Society of Civil Engineers (ASCE) in Journal of Pipeline Systems Engineering and Practice
- Vol. 16 (3)
Effect of Mixed Hydrogen Natural Gas on the Flow Field of Bypass PIG Using CFD
- 1 August 2025
- Published by American Society of Civil Engineers (ASCE) in Journal of Pipeline Systems Engineering and Practice
- Vol. 16 (3)
Effect of Mixed Hydrogen Natural Gas on the Flow Field of Bypass PIG Using CFD
- 16 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 9 (6) , 5417-5424
Tendon Driven Bistable Origami Flexible Gripper for High-Speed Adaptive Grasping
This letter introduces a novel bistable origami flexible gripper, which is based on a single-vertex and multi-crease (SVMC) origami structure that has several advantages, including a simple structure, low cost, and strong deformation capacity. This design addresses the drawbacks of slow response speed and low grasping efficiency in traditional gripper models. The origami structure is established using a waterbomb model, and the relationship between the crease angles is analyzed by applying the geometric relationship of spherical triangle to establish kinematic equations. In addition, potential energy equations in the deformation of SVMC are derived using a torsion spring model, which parameters are determined by conducting a detailed analysis of the influence of crease length and initial angle on energy storage and release processes. In addition, the tendon drive system helps to provide greater grasping force, promoting efficient and stable target grasping when the SVMC return to the initial state. Experimental results show that when subjected to an external trigger force of 2.65 N, the flexible gripper can transition from a spreading attitude to a contracted state within 61.58 ms, enabling rapid envelopment of the target, dropping the target, and returning to the initial state within 120 ms. These findings suggest that the proposed flexible gripper has significant application in high-speed food sorting and fruit picking.
- 16 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 9 (6) , 5417-5424
Tendon Driven Bistable Origami Flexible Gripper for High-Speed Adaptive Grasping
This letter introduces a novel bistable origami flexible gripper, which is based on a single-vertex and multi-crease (SVMC) origami structure that has several advantages, including a simple structure, low cost, and strong deformation capacity. This design addresses the drawbacks of slow response speed and low grasping efficiency in traditional gripper models. The origami structure is established using a waterbomb model, and the relationship between the crease angles is analyzed by applying the geometric relationship of spherical triangle to establish kinematic equations. In addition, potential energy equations in the deformation of SVMC are derived using a torsion spring model, which parameters are determined by conducting a detailed analysis of the influence of crease length and initial angle on energy storage and release processes. In addition, the tendon drive system helps to provide greater grasping force, promoting efficient and stable target grasping when the SVMC return to the initial state. Experimental results show that when subjected to an external trigger force of 2.65 N, the flexible gripper can transition from a spreading attitude to a contracted state within 61.58 ms, enabling rapid envelopment of the target, dropping the target, and returning to the initial state within 120 ms. These findings suggest that the proposed flexible gripper has significant application in high-speed food sorting and fruit picking.
- 1 November 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 233-236
Vehicle state and tire parameter estimation based on improved particle filter based on genetic algorithm
Independent tire dynamics parameters are often determined using expensive test equipment and large amounts of test data, after which these parameters are applied in the design phase to a vehicle model to simulate the vehicle’s handling dynamics behavior. The use of particle filtering techniques enables the estimation of tire parameters and can eventually lead to the estimation of parameters such as vehicle lateral forces. The advantage of genetic algorithm in selection inheritance is used to complement the degradation of particle weights and the lack of particle diversity in particle filter resampling to achieve high accuracy identification of tire parameters.
- 1 November 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 233-236
Vehicle state and tire parameter estimation based on improved particle filter based on genetic algorithm
Independent tire dynamics parameters are often determined using expensive test equipment and large amounts of test data, after which these parameters are applied in the design phase to a vehicle model to simulate the vehicle’s handling dynamics behavior. The use of particle filtering techniques enables the estimation of tire parameters and can eventually lead to the estimation of parameters such as vehicle lateral forces. The advantage of genetic algorithm in selection inheritance is used to complement the degradation of particle weights and the lack of particle diversity in particle filter resampling to achieve high accuracy identification of tire parameters.