TKTaro Kato

Taro Kato

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Taro Kato has a total of 49 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Relationship between Maximum Bending Stress and Surface Roughness of AZ31 Magnesium Alloy Fully Corroded in Salt-Water Environment

    by Keishi Iizuka, Taro Kato, Kentaro Yamada, Mitsuaki Furui

    AZ31 magnesium alloy is a representative magnesium alloy with well-balanced mechanical properties and castability. However, AZ31 magnesium alloy also has the disadvantage of poor corrosion resistance due to its low aluminium content. In previous research, it is known that the corrosion mechanism is such that filamentous corrosion is generated and then changes to full-scale corrosion. However, the relationship between corrosion and bending properties has not been revealed. In this study, AZ31 magnesium alloy was immersed in salt water with a concentration of 5%, and three-point bending tests were conducted to confirm changes in bending stress and strain due to strength loss caused by corrosion. Then, investigated which parameters Ra and Rz, which are indicators of surface roughness, are related to the maximum bending stress of the fully corroded AZ31 magnesium alloy. As a result, when evaluating the relationship between maximum bending stress and corrosion, it was found that it is better to evaluate by Ra of the corroded surface rather than by Rz.

  • Effect of Zinc Content on the Hitting Sound Characteristics of Brass

    by Ryusei Naganuma, Taro Kato, Mitsuaki Furui

    There are many products that produce sound when external force is applied to metals and alloys, such as wind chimes, golf clubs, and metal bats. Previous studies have investigated the differences between acoustic properties and sound impressions of these products depending on the type of material. Sound is an element that influences the comfort in our daily lives and the sensation of players in sports. Therefore, it is important to clarify the differences in acoustic properties of different materials in order to design and improve products. However, the effects of changes in chemical composition in the same material on acoustic properties have not been sufficiently studied. The purpose of this study is to evaluate the change in acoustic properties due to the chemical composition of metals and to contribute to the acoustic design of products. In this study, six types of brass specimens with varying zinc content from 5% to 40% were prepared, and the differences in frequency and decay time of hitting sound were evaluated. As a result, it was confirmed that the frequency tended to decrease as the zinc content increased, and the decrease in frequency was particularly pronounced for the specimens with a zinc content of 40%. Attenuation time showed an increasing trend but decreased slightly for specimens with 40% zinc content. These results indicate that the chemical composition of brass has a significant effect on acoustic properties.

  • Development of Acoustic Device Using Giant Magnetostrictive Material: Consideration of Acoustic Characteristics of Sound Generated by Wall Surface Vibrations

    by Taro Kato, Yudai Tanaka, Kentaro Sawada, Wenbao Wu, Ikkei Kobayashi, Jumpei Kuroda, Daigo Uchino, Kazuki Ogawa, Keigo Ikeda, Ayato Endo, et al.

    In this study, we explored the potential of a compact acoustic control system using giant magnetostrictive actuators (GMAs) for application in ultracompact electric vehicles (EVs), which face significant challenges in maintaining interior acoustic comfort due to their structural limitations. A fundamental investigation was conducted to clarify how differences in the internal structure of GMAs affect their vibration and acoustic output performances. Two GMA prototypes with different internal configurations (Model A, featuring two shorter rods and multiple permanent magnets, and Model B, featuring a single long rod) were evaluated through driving experiments. The acoustic signals were measured using a wall panel setup simulating in-cabin conditions. Both models exhibited an increase in sound pressure level with an increase in the applied voltage. However, the frequency response characteristics differed between the models. Model A performed better in the low-frequency range, whereas Model B maintained consistent performance across a broader frequency range. These findings provide essential insights into the design of space-saving and energy-efficient acoustic systems for next-generation mobility solutions.

  • Open Access

    Dual Halbach Array Compact Linear Actuator with Thrust Characteristics Part I Simulation Result

    by Jumpei Kuroda, Ryutaro Ono, Takumu Takayama, Shinobu Kasamatsu, Ikkei Kobayashi, Daigo Uchino, Kazuki Ogawa, Taro Kato, Keigo Ikeda, Ayato Endo, et al.

    The application of mechanical products in many situations involves linear motion. The cylinder head of an internal combustion engine (ICE), a mechanical product, contains intake and exhaust valves. These valves open or close using the linear motion converted by the camshafts rotated by the engine. A typical engine is operated with a single cam profile; depending on the engine rotation, there are areas where the cam profiles do not match, resulting in a poor engine performance. An intake and exhaust system with an actuator can solve this problem. In a previous study on this system, the geometry and processing during manufacturing were complex. Therefore, in response, a linear actuator operated by Lorentz force with a coil as the mover was designed in this study. Through an electromagnetic field analysis using the finite element method, a three-phase alternating current was applied to the coil, assuming that it would be used as a power source for a general inverter. Consequently, the thrust obtained in the valve-actuation direction was 56.7 N, indicating improved axial thrust over the conventional model.


  • Open Access

    Basic Study on Operation Control Systems of Internal Combustion Engines in Hybrid Small Race Cars to Improve Dynamic Performance

    by Hayato Yamada, Masamune Kobayashi, Yusuke Ebashi, Shinobu Kasamatsu, Ikkei Kobayashi, Jumpei Kuroda, Daigo Uchino, Kazuki Ogawa, Keigo Ikeda, Taro Kato, et al.

    Hybrid vehicles utilize multiple power sources, making them energy-efficient and enhancing both fuel efficiency and dynamic performance. As a result, hybrid vehicles have recently been adopted as race cars, which demand high powertrain performance. The hybrid vehicle system comprises two power sources: an internal combustion engine (ICE) and an electric motor, both of which require precise control. Controlling the output of the internal combustion engine is particularly challenging. This study investigated the dynamic response of an actuator in an electronic throttle system. The experimental results demonstrated that optimized parameters significantly improved the dynamic response. As a result, we propose a mechanism for hybrid vehicle performance and report the characteristics of an electronic throttle. The improvement in throttle opening can be verified by adjusting the P term.

  • Open Access

    A Study on Giant Magnetostrictive Actuator Used in Active Noise Control System for Ultra-compact Electric Vehicles (Analytical Consideration on Output Performance of the Actuator)

    by Taro Kato, Ryusei Naganuma, Koki Bando, Ikkei Kobayashi, Jumpei Kuroda, Daigo Uchino, Kazuki Ogawa, Keigo Ikeda, Ayato Endo, Xiaojun Liu, et al.

    The interiors of ultra-compact electric vehicles (EVs) can be uncomfortable owing to the noise caused by the road and wind. To address this issue, we propose an active noise control (ANC) system that uses a giant magnetostrictive actuator. The proposed system allows estimating ride comfort by analyzing the biological information of passengers and controlling the interior acoustic environment. The proposed ANC system employs wall-surface vibrations generated by a giant magnetostrictive actuator. We analytically investigated the thrust characteristics of giant magnetostrictive materials deformed by a magnetic field through electromagnetic field analysis. The results showed that the effect of thrust on frequency changes depends on the characteristics of the giant magnetostrictive material.


  • Open Access

    A Basic Study for Active Steering Wheel System for Steering Burden Evaluation by Driving Position Focus on Driver’s Arm Size

    by Daigo Uchino, Ikkei Kobayashi, Jumpei Kuroda, Kazuki Ogawa, Keigo Ikeda, Taro Kato, Ayato Endo, Hideaki Kato, Takayoshi Narita

    As automated driving has not yet been established, on narrow roads where there is no separation between pedestrians and vehicles, it is essential to switch to manual driving. However, when the driver turns the steering wheel from one hand to another on narrow roads, it causes steering burdens and operational errors if the steering feel or burden is not proper. Thus, this study aims to construct an active steering wheel system that provides an appropriate steering feel or burden by controlling the steering reaction torque, driving position and steering gear ratio for each driver. In this paper, we focused on and examined the driving position among these. A two-dimensional steering model that considers the size of the arms for each driver was established to evaluate steering burden. In addition, a basic study was conducted on the appropriate driving position. Then, based on the joint movements and angles calculation, the appropriate driving position that considers the size of the arms was studied by evaluating the joint power. As a result, it was found that if the steering wheel position is too close to the driver, the amount of joint movement increases, and if it is too far away, the joint movement decreases. Therefore, it was found that the appropriate steering wheel position for each driver’s arm length can be considered by using the joint power.


  • Open Access

    Basic Study on Mechanical Vibration Suppression System Using 2-Degree-of-Freedom Vibration Analysis

    by Keigo Ikeda, Kota Kamimori, Ikkei Kobayashi, Jumpei Kuroda, Daigo Uchino, Kazuki Ogawa, Ayato Endo, Taro Kato, Xiaojun Liu, Mohamad Heerwan Bin Peeie, et al.

    Mechanical vibrations adversely affect mechanical components, and in the worst case, lead to serious accidents by breaking themselves. To suppress vibrations, various studies have been conducted on vibration isolation, suppression, and resistance. In addition, technologies to actively suppress vibration have been rapidly developed in recent years, and it has been reported that vibrations can be suppressed with higher performance. However, these studies have been conducted mostly for low-order systems, and few studies have employed control models that consider the complex vibration characteristics of multi-degree-of-freedom (DOF) systems. This study is a basic study that establishes a control model for complex control systems, and the vibration characteristics of a 2-DOF system are calculated using the vibration analysis of a multi-DOF system. Furthermore, the vibration suppression performance of the 2-DOF system is investigated by performing vibration experiments.


  • Open Access

    Research on Yaw Moment Control System for Race Cars Using Drive and Brake Torques

    by Ikkei Kobayashi, Jumpei Kuroda, Daigo Uchino, Kazuki Ogawa, Keigo Ikeda, Taro Kato, Ayato Endo, Mohamad Heerwan Bin Peeie, Takayoshi Narita, Hideaki Kato

    The yaw acceleration required for circuit driving is determined by the time variation of the yaw rate due to two factors: corner radius and velocity at the center of gravity. Torque vectoring systems have the advantage where the yaw moment can be changed only by the longitudinal force without changing the lateral force of the tires, which greatly affects lateral acceleration. This is expected to improve the both the spinning performance and the orbital performance, which are usually in a trade-off relationship. In this study, we proposed a yaw moment control technology that actively utilized a power unit with a brake system, which was easy to implement in a system, and compared the performance of vehicles equipped with and without the proposed system using the Milliken Research Associates moment method for quasi-steady-state analysis. The performances of lateral acceleration and yaw moment were verified using the same method, and a variable corner radius simulation for circuit driving was used to compare time and performance. The results showed the effectiveness of the proposed system.


  • Open Access

    Vibration Characteristics Control of Resonance Point in Vehicle: Fundamental Considerations of Control System without Displacement and Velocity Information

    by Keigo Ikeda, Jumpei Kuroda, Daigo Uchino, Kazuki Ogawa, Ayato Endo, Taro Kato, Hideaki Kato, Takayoshi Narita

    The deterioration of ride comfort in ultra-compact vehicles has recently become an increasing concern. Active seat suspension was proposed to improve the ride comfort of ultra-compact vehicles. An active seat suspension is a vibration control device that is easily installed. The general vibration control system of the active seat suspension is fed back to the displacement and velocity by integrating the measured seat acceleration. This control has problems, such as control delay and deviation by integration. In this study, we focused on vibration control using acceleration directly. First, we established a control model that feeds back the acceleration to terminate the error occurring in the integral process and investigated the change in vibration characteristics in the case where the feedback gain of acceleration was changed. Second, the control system was analyzed to investigate the performance of the control based on the frequency characteristics. As a result, it was confirmed that the frequency response changes when the feedback gain is changed. In acceleration feedback control, ride comfort was improved by selecting a proper feedback gain because the characteristics of frequency were changed by the gain.