RDRamin Dabirian

Ramin Dabirian

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ramin Dabirian has a total of 6 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Numerical Simulation of Liquid Droplet Coalescence and Breakup

    by Shuxia Yuan, Ramin Dabirian, Ovadia Shoham, Ram S. Mohan

    This paper studied the evolution of binary droplet collision in liquid and also a mathematical calculation method of coalescence time. Binary droplet collisions occur in many engineering applications; however, the accurate models to predict the collision of droplets in the liquid are still lacking. In this work, the binary collision processes of droplets were simulated through computational fluid dynamic (CFD) method, where the interfaces between the two phases were tracked by the volume of fluid (VOF) approach. The results reveal that Weber number determines the results of the head-on collisions, and the cases with the same Weber number present similar evolution processes. If coalescence happens, the collision time decreases with increase in relative velocity, whereas the shape recovery time is independent with the relative velocity, but depends on droplet diameter. It is derived from this research that the collision time is proportional to the droplet diameter, and the shape recovery time is proportional to the 3/2 power of droplet diameter. The droplet moving directions play an important role in the collision results, and the case of two droplets moving toward each other with equal velocity is the easiest way to coalesce. When two droplets with different sizes collide, besides relative velocity, the coalescence and breakup are determined by the absolute velocities, the size, and size ratio of the two droplets. The increase in viscosity of continuous phase results an increase in collision time, but decrease in coalescence time.


  • Effect of Shear and Water Cut on Phase Inversion and Droplet Size Distribution in Oil–Water Flow

    by Mo Zhang, Ramin Dabirian, Ram S. Mohan, Ovadia Shoham

    Oil–water dispersed flow occurs commonly in the petroleum industry during the production and transportation of crudes. Phase inversion occurs when the dispersed phase grows into the continuous phase and the continuous phase becomes the dispersed phase caused by changes in the composition, interfacial properties, and other factors. Production equipment, such as pumps and chokes, generates shear in oil–water mixture flow, which has a strong effect on phase inversion phenomena. The objective of this paper is to investigate the effects of shear intensity and water cut (WC) on the phase inversion region and also the droplet size distribution. A state-of-the-art closed-loop two phase (oil–water) flow facility including a multipass gear pump and a differential dielectric sensor (DDS) is used to identify the phase inversion region. Also, the facility utilizes an in-line droplet size analyzer (a high speed camera), to record real-time videos of oil–water emulsion to determine the droplet size distribution. The experimental data for phase inversion confirm that as shear intensity increases, the phase inversion occurs at relatively higher dispersed phase fractions. Also the data show that oil-in-water emulsion requires larger dispersed phase volumetric fraction for phase inversion as compared with that of water-in-oil emulsion under the same shear intensity conditions. Experiments for droplet size distribution confirm that larger droplets are obtained for the water continuous phase, and increasing the dispersed phase volume fraction leads to the creation of larger droplets.


  • Oil/Water Emulsions Stabilized by Nanoparticles of Different Wettabilities

    by Ilias Gavrielatos, Ramin Dabirian, Ram S. Mohan, Ovadia Shoham

    A state-of-the-art, portable dispersion characterization rig (P-DCR) is used to investigate the effect of nanoparticles (NP) on oil-water emulsion formation and stabilization. Spherical silica NP of different wettabilities were used to investigate their effect on separation kinetics of solid stabilized emulsions in terms of solid particle concentration, wettability, initial dispersion phase, water-cut, and shearing time. The main findings of the study include the following: NP, even at concentrations as low as 0.005% or 0.01% (by weight), can significantly increase separation time of oil/water emulsions from a few minutes to several hours or even days. The P-DCR is recommended as an effective inline tool to measure emulsion stability in the field.


  • Sand Transport in Slightly Upward Inclined Multiphase Flow

    by Ramin Dabirian, Ram Mohan, Ovadia Shoham, Gene Kouba

    In order to assess the critical sand deposition condition, a unique 4-in ID test facility was designed and constructed, which enables the pipe to be inclined 1.5 deg upward. Experiments were conducted with air–water-glass beads at low sand concentrations (< 10,000 ppm), and the air and water flow rates were selected to ensure stratified flow regime along the pipe. At constant superficial liquid velocity, the gas velocity was reduced to find the critical sand deposition velocity. Six sand flow regimes are identified, namely, fully dispersed solid flow, dilute solids at the wall, concentrated solids at the wall, moving dunes, stationary dunes, and stationary bed. The experimental results reveal that sand flow regimes under air–water stratified flow are strong functions of phase velocities, particle size, and particle concentration. Also, the results show that air–water flow regime plays an important role in particle transport; slug flow has high capability to transport particles at the pipe bottom, while the stratified flow has high risk of sand deposition. As long as the sand dunes are observed at the pipe bottom, the critical sand deposition velocities slightly increase with concentrations, while for stationary bed, the critical velocity increases exponentially with concentration.