Guoliang Chen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Guoliang Chen has a total of 37 co-authors. Here are the top co-authors by number of shared publications:
Tao Liu
Hunan Province Key Laboratory of Coal Resources Clean Utilization and Mine Environment Protection, Hunan University of Science and Technology, Xiangtan, China
5 shared publications- Zhang Chen
School of Resource Environment and Safety Engineering Hunan University of Science and Technology Xiangtan Hunan China
4 shared publications Zhenshan Chen
Hunan Province Key Laboratory of Coal Resources Clean Utilization and Mine Environment Protection, Hunan University of Science and Technology, Xiangtan, China
4 shared publicationsZhixian Li
Hunan Province Key Laboratory of Coal Resources Clean Utilization and Mine Environment Protection, Hunan University of Science and Technology, Xiangtan, China
4 shared publicationsJianlin Zhou
Hunan Province Key Laboratory of Coal Resources Clean Utilization and Mine Environment Protection, Hunan University of Science and Technology, Xiangtan, China
3 shared publications- Guoliang Chen
School of Resources, Environment and Safety Engineering, Hunan University of Science and Technology, Xiangtan, 411201, China; Hunan Provincial Key Laboratory of Clean Utilization of Coal Resources and Mine Environmental Protection, Hunan University of Science and Technology, Xiangtan, 411201, China
2 shared publications
Latest Publications
- Open Access
Adsorption of Oxytetracycline Hydrochloride by Iron-Doped Sodium Alginate Gel Composite Biochar Microspheres: Performance and Mechanism
Conventional powdered biochar encounters severe bottlenecks in practical water treatment, such as difficult separation, easy loss, and potential secondary pollution. This work aimed to develop recyclable and high-performance adsorbents by preparing iron-doped biochar/sodium alginate composite microspheres (BC/MBC500-ALF) through Fe3+ cross-linking. Using corn stalk biochar and KMnO4-modified biochar as adsorbent components and sodium alginate (SA) as a green shaping matrix, SA formed a stable egg-box hydrogel network to convert powdered biochar into uniform microspheres. Batch adsorption experiments revealed that the optimal pH for oxytetracycline (OTC) adsorption was 9, with adsorption capacities of 136.28 mg/g for BC500-ALF and 182.91 mg/g for MBC500-ALF. Kinetic analysis showed that BC500-ALF followed pseudo-first-order kinetics (R2 = 0.983) dominated by physisorption, while MBC500-ALF fitted pseudo-second-order kinetics (R2 = 0.994) dominated by chemisorption. The maximum Langmuir adsorption capacities at 308 K were 220.75 mg/g and 495.05 mg/g, respectively. Thermodynamic parameters confirmed a spontaneous and endothermic process. The adsorption mechanisms involved hydrogen bonding, π–π stacking, electrostatic attraction, metal-bridging complexation, and Fe–Mn oxide-mediated redox reactions. SA exerted dual functions in structure stabilization and adsorption enhancement. This composite provides an efficient and eco-friendly approach for tetracycline antibiotic pollution control in aqueous environments.
Open AccessAdsorption of Oxytetracycline Hydrochloride by Iron-Doped Sodium Alginate Gel Composite Biochar Microspheres: Performance and Mechanism
Conventional powdered biochar encounters severe bottlenecks in practical water treatment, such as difficult separation, easy loss, and potential secondary pollution. This work aimed to develop recyclable and high-performance adsorbents by preparing iron-doped biochar/sodium alginate composite microspheres (BC/MBC500-ALF) through Fe3+ cross-linking. Using corn stalk biochar and KMnO4-modified biochar as adsorbent components and sodium alginate (SA) as a green shaping matrix, SA formed a stable egg-box hydrogel network to convert powdered biochar into uniform microspheres. Batch adsorption experiments revealed that the optimal pH for oxytetracycline (OTC) adsorption was 9, with adsorption capacities of 136.28 mg/g for BC500-ALF and 182.91 mg/g for MBC500-ALF. Kinetic analysis showed that BC500-ALF followed pseudo-first-order kinetics (R2 = 0.983) dominated by physisorption, while MBC500-ALF fitted pseudo-second-order kinetics (R2 = 0.994) dominated by chemisorption. The maximum Langmuir adsorption capacities at 308 K were 220.75 mg/g and 495.05 mg/g, respectively. Thermodynamic parameters confirmed a spontaneous and endothermic process. The adsorption mechanisms involved hydrogen bonding, π–π stacking, electrostatic attraction, metal-bridging complexation, and Fe–Mn oxide-mediated redox reactions. SA exerted dual functions in structure stabilization and adsorption enhancement. This composite provides an efficient and eco-friendly approach for tetracycline antibiotic pollution control in aqueous environments.
- Open Access
- 22 May 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (11) , 5803
Unraveling the Immobilization Mechanisms of Biochar and Humic Acid on Heavy Metals: DOM Insights from EEMs-PARAFAC and 2D-COS Analysis
The structural complexity and variability of dissolved organic matter (DOM) significantly affect its binding capacity with heavy metals (HMs). This study evaluated the remediation efficacy of biochar (BC) and humic acid (HA) on Mn- and Cu-contaminated soils using four maize pot treatments: 3% BC (YB3), 6% BC (YB6), 3% BC + 1% HA (YB3H), and 6% BC + 1% HA (YB6H). The results showed that compared to the control (Y), Results showed Mn and Cu concentrations in rhizosphere soil decreased by 11.08–17.76%, while DOM content increased by 44.2–103.83%. BC enhanced DOM aromaticity and humification, further intensified by HA, leading to a more complex and stable DOM structure. PARAFAC identified four DOM components in BC (BC-DOM): C1 (fulvic-like), C2/C3 (humic-like), and C4 (protein-like), and in BC + HA (BC + H-DOM), an enhanced structural complexity with additional aromatic C–H groups was observed. 2D-COS analysis revealed that in BC-DOM, polysaccharides primarily interacted with Mn and Cu, followed by carboxylic acids and phenolic hydroxyl groups, but in BC + H-DOM, aromatic C–H groups preferentially bound Cu before polysaccharides, showing weaker affinity for Mn. These results elucidate the DOM-mediated immobilization mechanisms of BC and HA for HMs, offering insights for soil remediation and carbon sequestration strategies.
- 22 May 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (11) , 5803
Open AccessUnraveling the Immobilization Mechanisms of Biochar and Humic Acid on Heavy Metals: DOM Insights from EEMs-PARAFAC and 2D-COS Analysis
The structural complexity and variability of dissolved organic matter (DOM) significantly affect its binding capacity with heavy metals (HMs). This study evaluated the remediation efficacy of biochar (BC) and humic acid (HA) on Mn- and Cu-contaminated soils using four maize pot treatments: 3% BC (YB3), 6% BC (YB6), 3% BC + 1% HA (YB3H), and 6% BC + 1% HA (YB6H). The results showed that compared to the control (Y), Results showed Mn and Cu concentrations in rhizosphere soil decreased by 11.08–17.76%, while DOM content increased by 44.2–103.83%. BC enhanced DOM aromaticity and humification, further intensified by HA, leading to a more complex and stable DOM structure. PARAFAC identified four DOM components in BC (BC-DOM): C1 (fulvic-like), C2/C3 (humic-like), and C4 (protein-like), and in BC + HA (BC + H-DOM), an enhanced structural complexity with additional aromatic C–H groups was observed. 2D-COS analysis revealed that in BC-DOM, polysaccharides primarily interacted with Mn and Cu, followed by carboxylic acids and phenolic hydroxyl groups, but in BC + H-DOM, aromatic C–H groups preferentially bound Cu before polysaccharides, showing weaker affinity for Mn. These results elucidate the DOM-mediated immobilization mechanisms of BC and HA for HMs, offering insights for soil remediation and carbon sequestration strategies.
- 30 November 2022
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 30 (11) , 31489-31500
Enhanced Cr (VI) reduction and removal by Fe/Mn oxide biochar composites under acidic simulated wastewater
Chromium (Cr (VI)) can cause severe damage to the ecosystem and humans because of its toxicity. In this paper, the adsorbed Fe/Mn ions Bacillus cereus ZNT-03, lotus seeds, and graphene oxide were co-cultured as the raw materials. Fe/Mn oxide biochar composite (FMBC) was prepared to treat Cr (VI) by one-step pyrolysis. FMBC has high-density micropores, and the average pore size is about 0.82 nm. Fe (II), Mn (II), and N-containing functional groups could serve as electron donors for Cr (VI) reduction. The removal of Cr (VI) is monolayer chemisorption and pH-dependent. The maximum adsorption capacity of FMBC is 21.25 mg g−1. Cr (VI) is reduced and adsorbed on FMBC by physical adsorption, reduction, complexation, electrostatic attraction, and coprecipitation. The contribution ratio of the reduction mechanism to Cr (VI) is 72.25%. The packed column and regeneration experiments indicated that FMBC had excellent adsorption stability even after soaking in acidic simulated wastewater after 180 days (pH 1.5). These results indicate that FMBC can provide rapid reduction and efficient adsorption for Cr (VI), making it possible to apply in water treatment.
- 30 November 2022
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 30 (11) , 31489-31500
Enhanced Cr (VI) reduction and removal by Fe/Mn oxide biochar composites under acidic simulated wastewater
Chromium (Cr (VI)) can cause severe damage to the ecosystem and humans because of its toxicity. In this paper, the adsorbed Fe/Mn ions Bacillus cereus ZNT-03, lotus seeds, and graphene oxide were co-cultured as the raw materials. Fe/Mn oxide biochar composite (FMBC) was prepared to treat Cr (VI) by one-step pyrolysis. FMBC has high-density micropores, and the average pore size is about 0.82 nm. Fe (II), Mn (II), and N-containing functional groups could serve as electron donors for Cr (VI) reduction. The removal of Cr (VI) is monolayer chemisorption and pH-dependent. The maximum adsorption capacity of FMBC is 21.25 mg g−1. Cr (VI) is reduced and adsorbed on FMBC by physical adsorption, reduction, complexation, electrostatic attraction, and coprecipitation. The contribution ratio of the reduction mechanism to Cr (VI) is 72.25%. The packed column and regeneration experiments indicated that FMBC had excellent adsorption stability even after soaking in acidic simulated wastewater after 180 days (pH 1.5). These results indicate that FMBC can provide rapid reduction and efficient adsorption for Cr (VI), making it possible to apply in water treatment.
- Open Access
- 1 June 2022
- Published by Springer Nature in Research Square
Enhanced Cr(VI) reduction and removal by Fe/Mn oxides biochar composites under acidic simulated wastewater
Chromium (Cr(VI)) has attracted extensive attention because of its toxicity, which can cause severe damage to the ecosystem and human. In this paper, adsorbed Fe/Mn ions Bacillus cereus ZNT-03, lotus seeds, and graphene oxide were co-cultured as raw materials. Fe/Mn oxides biochar composite (FMBC) was prepared to treat Cr(VI) by one-step pyrolysis. FMBC has high-density micropores, and the average pore size is about 0.82 nm. Given the content of Fe (3.07 mg g− 1), Mn (2.56 mg g− 1), and N (3.04%) in the FMBC, Fe(II), Mn(II), and N-containing functional groups could be served as electron donors to reduce Cr(VI). The removal of Cr(VI) is monolayer chemisorption and pH-dependent. The maximum adsorption capacity of FMBC was 21.25 mg g− 1. Cr(VI) is reduced and adsorbed on FMBC by physical adsorption, reduction, complexation, electrostatic attraction, and co-precipitation. The contribution ratio of reduction mechanism to Cr(VI) is 72.25%. The packed column and regeneration experiments indicated that FMBC had high adsorption performance and excellent adsorption stability even after soaking in acidic simulated wastewater after 180 days (pH 1.5). These results indicate that FMBC can provide rapid reduction and efficient adsorption for Cr(VI), making it possible to apply in water treatment.
- 1 June 2022
- Published by Springer Nature in Research Square
Open AccessEnhanced Cr(VI) reduction and removal by Fe/Mn oxides biochar composites under acidic simulated wastewater
Chromium (Cr(VI)) has attracted extensive attention because of its toxicity, which can cause severe damage to the ecosystem and human. In this paper, adsorbed Fe/Mn ions Bacillus cereus ZNT-03, lotus seeds, and graphene oxide were co-cultured as raw materials. Fe/Mn oxides biochar composite (FMBC) was prepared to treat Cr(VI) by one-step pyrolysis. FMBC has high-density micropores, and the average pore size is about 0.82 nm. Given the content of Fe (3.07 mg g− 1), Mn (2.56 mg g− 1), and N (3.04%) in the FMBC, Fe(II), Mn(II), and N-containing functional groups could be served as electron donors to reduce Cr(VI). The removal of Cr(VI) is monolayer chemisorption and pH-dependent. The maximum adsorption capacity of FMBC was 21.25 mg g− 1. Cr(VI) is reduced and adsorbed on FMBC by physical adsorption, reduction, complexation, electrostatic attraction, and co-precipitation. The contribution ratio of reduction mechanism to Cr(VI) is 72.25%. The packed column and regeneration experiments indicated that FMBC had high adsorption performance and excellent adsorption stability even after soaking in acidic simulated wastewater after 180 days (pH 1.5). These results indicate that FMBC can provide rapid reduction and efficient adsorption for Cr(VI), making it possible to apply in water treatment.
- Open Access
- 8 July 2021
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 6 (28) , 18253-18259
Rapid Separation and Efficient Removal of Cd Based on Enhancing Surface Precipitation by Carbonate-Modified Biochar
The high buoyancy of biochar makes its application difficult in Cd removal. In this paper, the content of minerals was increased by modifying carbonate on the biochar surface using the vacuum impregnation method. Enhancing surface precipitation between minerals and Cd introduced a correspondingly great number of Cd precipitates on the biochar surface, leading to the rapid precipitation and separation of buoyant biochar. The physical and chemical properties of carbonate-modified biochar and the adsorption mechanism of Cd were comprehensively studied by jar tests, scanning electron microscopy–energy-dispersive X-ray spectroscopy, X-ray diffraction, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy. The results showed that the adsorption of Cd by carbonate-modified biochar was controlled by multiple mechanisms, including surface precipitation, surface complexation, and Cd−π interaction. Surface precipitation dominated the removal of Cd. The contributions of Cd removal mechanisms indicated that the contribution proportions of minerals increased from 89.73 to 97.9% when the pyrolysis temperature increased from 300 to 600 °C, while the contribution proportions of Cd−π binding decreased from 9.99 to 2.08%. Meanwhile, oxygen functional groups have only a marginal effect on Cd adsorption. Besides, the results revealed that the higher surface hydrophobicity and the lower polarity were conducive to biochar separation from water. The Cd removal method can provide efficient adsorption and rapid separation, making it possible to use biochar in water treatment.
- 8 July 2021
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 6 (28) , 18253-18259
Open AccessRapid Separation and Efficient Removal of Cd Based on Enhancing Surface Precipitation by Carbonate-Modified Biochar
The high buoyancy of biochar makes its application difficult in Cd removal. In this paper, the content of minerals was increased by modifying carbonate on the biochar surface using the vacuum impregnation method. Enhancing surface precipitation between minerals and Cd introduced a correspondingly great number of Cd precipitates on the biochar surface, leading to the rapid precipitation and separation of buoyant biochar. The physical and chemical properties of carbonate-modified biochar and the adsorption mechanism of Cd were comprehensively studied by jar tests, scanning electron microscopy–energy-dispersive X-ray spectroscopy, X-ray diffraction, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy. The results showed that the adsorption of Cd by carbonate-modified biochar was controlled by multiple mechanisms, including surface precipitation, surface complexation, and Cd−π interaction. Surface precipitation dominated the removal of Cd. The contributions of Cd removal mechanisms indicated that the contribution proportions of minerals increased from 89.73 to 97.9% when the pyrolysis temperature increased from 300 to 600 °C, while the contribution proportions of Cd−π binding decreased from 9.99 to 2.08%. Meanwhile, oxygen functional groups have only a marginal effect on Cd adsorption. Besides, the results revealed that the higher surface hydrophobicity and the lower polarity were conducive to biochar separation from water. The Cd removal method can provide efficient adsorption and rapid separation, making it possible to use biochar in water treatment.
- 1 May 2021
- Published by Elsevier in Science of The Total Environment
- Vol. 769, 145159
Preparation of magnetic hydrochar derived from iron-rich Phytolacca acinosa Roxb. for Cd removal
- 1 May 2021
- Published by Elsevier in Science of The Total Environment
- Vol. 769, 145159
Preparation of magnetic hydrochar derived from iron-rich Phytolacca acinosa Roxb. for Cd removal
- 14 February 2018
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 25 (12) , 11854-11866
Characteristics and mechanisms of cadmium adsorption from aqueous solution using lotus seedpod-derived biochar at two pyrolytic temperatures
Herein, biochar derived from lotus seedpods, as an effective adsorbent, was prepared by pyrolysis method at 300 and 600 °C. The physicochemical characteristics and cadmium adsorption properties were studied systematically by batch adsorption experiments, FTIR, SEM–EDX, XRD, and XPS. Cd adsorption onto lotus seedpod-derived biochar was better fitted using Freundlich isotherm and pseudo-second-order model. Adsorption capacity of biochar produced at 300 and 600 °C was 31.69 and 51.18 mg g−1, respectively. The Cd adsorption capacity of biochar was related to its characteristics determined by pyrolysis temperature, including carbonization, surface area, surface morphology, and surface functional groups. Cd adsorption on lotus seedpod-derived biochar revealed that adsorption was controlled by multiple mechanisms including surface complexation, ion exchange, surface precipitation, and Cd–π interaction. This study showed that lotus seedpod-derived biochar is an effective and environmentally friendly adsorbent for water treatment.
- 14 February 2018
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 25 (12) , 11854-11866
Characteristics and mechanisms of cadmium adsorption from aqueous solution using lotus seedpod-derived biochar at two pyrolytic temperatures
Herein, biochar derived from lotus seedpods, as an effective adsorbent, was prepared by pyrolysis method at 300 and 600 °C. The physicochemical characteristics and cadmium adsorption properties were studied systematically by batch adsorption experiments, FTIR, SEM–EDX, XRD, and XPS. Cd adsorption onto lotus seedpod-derived biochar was better fitted using Freundlich isotherm and pseudo-second-order model. Adsorption capacity of biochar produced at 300 and 600 °C was 31.69 and 51.18 mg g−1, respectively. The Cd adsorption capacity of biochar was related to its characteristics determined by pyrolysis temperature, including carbonization, surface area, surface morphology, and surface functional groups. Cd adsorption on lotus seedpod-derived biochar revealed that adsorption was controlled by multiple mechanisms including surface complexation, ion exchange, surface precipitation, and Cd–π interaction. This study showed that lotus seedpod-derived biochar is an effective and environmentally friendly adsorbent for water treatment.
- 8 February 2017
- Published by Springer Nature in International Journal of Environmental Science and Technology
- Vol. 14 (8) , 1635-1642
In situ formation of AgNPs on S. cerevisiae surface as bionanocomposites for bacteria killing and heavy metal removal
- 8 February 2017
- Published by Springer Nature in International Journal of Environmental Science and Technology
- Vol. 14 (8) , 1635-1642
In situ formation of AgNPs on S. cerevisiae surface as bionanocomposites for bacteria killing and heavy metal removal