Yazhi Sun
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yazhi Sun has a total of 29 co-authors. Here are the top co-authors by number of shared publications:
- Shaochen Chen
Aiiso Yufeng Li Family Department of Chemical and Nano Engineering, University of California San Diego, La Jolla, USA
5 shared publications Yi Xiang
The Aiiso Yufeng Li Family Department of Chemical and Nano Engineering
5 shared publicationsMary K. Melarkey
Department of Chemical and Nano Engineering, University of California San Diego, 9500 Gilman Drive, La Jolla, California 92093, United States
4 shared publications- Jacob Schimelman
Department of Chemical and Nano Engineering, University of California San Diego, La Jolla, USA
2 shared publications Ting‐Yu Lu
Program of Materials Science and Engineering University of California San Diego 9500 Gilman Drive La Jolla CA 92093 USA
2 shared publicationsAmelia H. Burns
Department of Biology and Biological Engineering, California Institute of Technology, Pasadena, USA
1 shared publication
Latest Publications
- 13 May 2026
- Published by American Chemical Society (ACS) in Chemical Reviews
- Vol. 126 (10) , 5852-5876
Biofabrication of Vascularized Tissues
Advances in biofabrication, stem cell biology, and biomaterials engineering have enabled the generation of multicellular tissue constructs capable of recapitulating key aspects of biological function. Despite these advances, the transition from millimeter-scale engineered tissues to centimeter-scale solid organs remains limited by the inability to establish dense, functional vascular networks capable of sustaining metabolically active tissues. This focused review summarizes the complexities involved in generating physiological vasculature and highlights progress in several approaches developed over the past two decades. We discuss progress across several core technology categories, including organoid-based and microfluidic-based platforms to model the vasculatures, as well as the techniques feasible to construct an organ-scale tissue, including recellularization of decellularized organ scaffolds, and bottom-up biofabrication approaches for complex 3D vasculature and high-cell density compatibility. By synthesizing insights from these complementary approaches, we highlight emerging design principles for constructing hierarchical and functional vascular networks. Finally, we outline a forward-looking roadmap toward scalable vascularization strategies that may enable the realization of biofabricated, functional human organs in the coming decade.
- 13 May 2026
- Published by American Chemical Society (ACS) in Chemical Reviews
- Vol. 126 (10) , 5852-5876
Biofabrication of Vascularized Tissues
Advances in biofabrication, stem cell biology, and biomaterials engineering have enabled the generation of multicellular tissue constructs capable of recapitulating key aspects of biological function. Despite these advances, the transition from millimeter-scale engineered tissues to centimeter-scale solid organs remains limited by the inability to establish dense, functional vascular networks capable of sustaining metabolically active tissues. This focused review summarizes the complexities involved in generating physiological vasculature and highlights progress in several approaches developed over the past two decades. We discuss progress across several core technology categories, including organoid-based and microfluidic-based platforms to model the vasculatures, as well as the techniques feasible to construct an organ-scale tissue, including recellularization of decellularized organ scaffolds, and bottom-up biofabrication approaches for complex 3D vasculature and high-cell density compatibility. By synthesizing insights from these complementary approaches, we highlight emerging design principles for constructing hierarchical and functional vascular networks. Finally, we outline a forward-looking roadmap toward scalable vascularization strategies that may enable the realization of biofabricated, functional human organs in the coming decade.
- 27 April 2026
- Published by American Chemical Society (ACS) in ACS Biomaterials Science & Engineering
- Vol. 12 (6) , 3188-3200
A 3D-Bioprinted Artificial Coral Platform for Investigating Structural Effects on Microalgal Photophysiology
Coral skeletal morphology and optical properties play critical roles in regulating light distribution to symbiotic dinoflagellates and shaping their growth and photosynthetic performance. However, existing experimental approaches lack precise control over skeletal microgeometry and optical scattering, limiting comprehensive studies of coral photophysiology. Here, we present a 3D bioprinted artificial coral platform integrating engineered hydrogel-based tissue with tunable skeletal structures to investigate coral-algal light interactions. Diffusion-optimized hyaluronic acid glycidyl methacrylate (HAGM) hydrogels supported robust growth and photosynthesis of encapsulated dinoflagellates. Using natural coral skeletons from shallow and mesophotic environments, we demonstrate that algal growth within the HAGM tissue layer is regulated by the underlying skeletal morphology. We further fabricated artificial coral skeletons with fine-scale corallite geometries by incorporating cellulose nanocrystals to enhance light scattering. Evaluation under varying light intensities revealed photosynthetic performance trends consistent with those observed under natural conditions. This platform provides a controllable in vitro model for studying coral-algal photophysiology.
- 27 April 2026
- Published by American Chemical Society (ACS) in ACS Biomaterials Science & Engineering
- Vol. 12 (6) , 3188-3200
A 3D-Bioprinted Artificial Coral Platform for Investigating Structural Effects on Microalgal Photophysiology
Coral skeletal morphology and optical properties play critical roles in regulating light distribution to symbiotic dinoflagellates and shaping their growth and photosynthetic performance. However, existing experimental approaches lack precise control over skeletal microgeometry and optical scattering, limiting comprehensive studies of coral photophysiology. Here, we present a 3D bioprinted artificial coral platform integrating engineered hydrogel-based tissue with tunable skeletal structures to investigate coral-algal light interactions. Diffusion-optimized hyaluronic acid glycidyl methacrylate (HAGM) hydrogels supported robust growth and photosynthesis of encapsulated dinoflagellates. Using natural coral skeletons from shallow and mesophotic environments, we demonstrate that algal growth within the HAGM tissue layer is regulated by the underlying skeletal morphology. We further fabricated artificial coral skeletons with fine-scale corallite geometries by incorporating cellulose nanocrystals to enhance light scattering. Evaluation under varying light intensities revealed photosynthetic performance trends consistent with those observed under natural conditions. This platform provides a controllable in vitro model for studying coral-algal photophysiology.
- Open Access
- 13 January 2026
- Published by IOP Publishing in Biofabrication
- Vol. 18 (1)
Bioprinting collagenase-responsive hydrogel for controlled release of cowpea mosaic virus immunotherapy
In this work, we developed a collagenase-responsive hydrogel system to covalently load cancer immunotherapy candidate cowpea mosaic virus (CPMV) using 3D Digital Light Processing (DLP) bioprinting technology. CPMV was functionalized with norbornene groups (CPMV-NB), which was then bioprinted into hydrogels with 8-arm polyethylene glycol (PEG) norbornene and a collagenase-cleavable peptide via photoinduced thiol-ene click chemistry. This strategy enabled stable retention of CPMV-NB within the hydrogels and achieved controlled release of CPMV-NB triggered by collagenase. Furthermore, released CPMV-NB retained its immunogenicity to stimulate immune cells.
- 13 January 2026
- Published by IOP Publishing in Biofabrication
- Vol. 18 (1)
Open AccessBioprinting collagenase-responsive hydrogel for controlled release of cowpea mosaic virus immunotherapy
In this work, we developed a collagenase-responsive hydrogel system to covalently load cancer immunotherapy candidate cowpea mosaic virus (CPMV) using 3D Digital Light Processing (DLP) bioprinting technology. CPMV was functionalized with norbornene groups (CPMV-NB), which was then bioprinted into hydrogels with 8-arm polyethylene glycol (PEG) norbornene and a collagenase-cleavable peptide via photoinduced thiol-ene click chemistry. This strategy enabled stable retention of CPMV-NB within the hydrogels and achieved controlled release of CPMV-NB triggered by collagenase. Furthermore, released CPMV-NB retained its immunogenicity to stimulate immune cells.
3D Bioprinting of Jellyfish‐Mimicking Constructs with Dynamical Responsiveness for Water Pollution Treatment
Wastewater treatment, particularly for persistent organic pollutants (POPs), remains a significant challenge. Although advanced oxidation processes (AOPs) currently used for treating POPs can achieve a decent efficiency, they often involve high costs and necessitate additional post‐treatment processes. Here, a jellyfish‐mimicking, multi‐functional living material encapsulating algae cells are presented, namely Algelly, created using a multi‐material digital‐light processing (DLP) bioprinting technique. The Algelly construct comprises a methacrylated alginate (AlgMA) layer designed to support algae growth, and a poly(N‐isopropylacrylamide) (PNIPAM) layer embedded with magnetic nanoparticles (MNs). The MNs enable the Algelly to respond to near‐infrared (NIR) laser for deformation and magnetic force for steering. It is demonstrated that the DLP bioprinting technique can fabricate the heterogeneous Algelly with high spatial resolution and efficiency, which supports subsequent algae proliferation and effective photosynthesis in the Algelly matrix. Moreover, the NIR‐induced thermo‐responsive deformation and magnetic steering capabilities enhance Algelly's adaptability for recycling and collection. Most importantly, Algelly demonstrates a high efficiency in degrading POPs under white light illumination. Therefore, it is believed that Algelly holds a promising potential for new applications in wastewater treatment, given its efficiency in POP decomposition and flexible location control capabilities.
3D Bioprinting of Jellyfish‐Mimicking Constructs with Dynamical Responsiveness for Water Pollution Treatment
Wastewater treatment, particularly for persistent organic pollutants (POPs), remains a significant challenge. Although advanced oxidation processes (AOPs) currently used for treating POPs can achieve a decent efficiency, they often involve high costs and necessitate additional post‐treatment processes. Here, a jellyfish‐mimicking, multi‐functional living material encapsulating algae cells are presented, namely Algelly, created using a multi‐material digital‐light processing (DLP) bioprinting technique. The Algelly construct comprises a methacrylated alginate (AlgMA) layer designed to support algae growth, and a poly(N‐isopropylacrylamide) (PNIPAM) layer embedded with magnetic nanoparticles (MNs). The MNs enable the Algelly to respond to near‐infrared (NIR) laser for deformation and magnetic force for steering. It is demonstrated that the DLP bioprinting technique can fabricate the heterogeneous Algelly with high spatial resolution and efficiency, which supports subsequent algae proliferation and effective photosynthesis in the Algelly matrix. Moreover, the NIR‐induced thermo‐responsive deformation and magnetic steering capabilities enhance Algelly's adaptability for recycling and collection. Most importantly, Algelly demonstrates a high efficiency in degrading POPs under white light illumination. Therefore, it is believed that Algelly holds a promising potential for new applications in wastewater treatment, given its efficiency in POP decomposition and flexible location control capabilities.
- Open Access
- 24 April 2025
- Published by Zhejiang University Press in Bio-Design and Manufacturing
- Vol. 8 (4) , 543-557
Machine learning-assisted stiffness prediction in high-cell-density bioprinting
Bioprinting of cell-laden hydrogels is a rapidly growing field in tissue engineering. The advent of digital light processing (DLP) three-dimensional (3D) bioprinting technique has revolutionized the fabrication of complex 3D structures. By adjusting light exposure, it becomes possible to control the mechanical properties of the structure, a critical factor in modulating cell activities. To better mimic cell densities in real tissues, recent progress has been made in achieving high-cell-density (HCD) printing with high resolution. However, regulating the stiffness in HCD constructs remains challenging. The large volume of cells greatly affects the light-based DLP bioprinting by causing light absorption, reflection, and scattering. Here, we introduce a neural network-based machine learning technique to predict the stiffness of cell-laden hydrogel scaffolds. Using comprehensive mechanical testing data from 3D bioprinted samples, the model was trained to deliver accurate predictions. To address the demand of working with precious and costly cell types, we employed various methods to ensure the generalizability of the model, even with limited datasets. We demonstrated a transfer learning method to achieve good performance for a precious cell type with a reduced amount of data. The chosen method outperformed many other machine learning techniques, offering a reliable and efficient solution for stiffness prediction in cell-laden scaffolds. This breakthrough paves the way for the next generation of precision bioprinting and more customized tissue engineering.
- 24 April 2025
- Published by Zhejiang University Press in Bio-Design and Manufacturing
- Vol. 8 (4) , 543-557
Open AccessMachine learning-assisted stiffness prediction in high-cell-density bioprinting
Bioprinting of cell-laden hydrogels is a rapidly growing field in tissue engineering. The advent of digital light processing (DLP) three-dimensional (3D) bioprinting technique has revolutionized the fabrication of complex 3D structures. By adjusting light exposure, it becomes possible to control the mechanical properties of the structure, a critical factor in modulating cell activities. To better mimic cell densities in real tissues, recent progress has been made in achieving high-cell-density (HCD) printing with high resolution. However, regulating the stiffness in HCD constructs remains challenging. The large volume of cells greatly affects the light-based DLP bioprinting by causing light absorption, reflection, and scattering. Here, we introduce a neural network-based machine learning technique to predict the stiffness of cell-laden hydrogel scaffolds. Using comprehensive mechanical testing data from 3D bioprinted samples, the model was trained to deliver accurate predictions. To address the demand of working with precious and costly cell types, we employed various methods to ensure the generalizability of the model, even with limited datasets. We demonstrated a transfer learning method to achieve good performance for a precious cell type with a reduced amount of data. The chosen method outperformed many other machine learning techniques, offering a reliable and efficient solution for stiffness prediction in cell-laden scaffolds. This breakthrough paves the way for the next generation of precision bioprinting and more customized tissue engineering.
- Open Access
- 7 May 2024
- Published by Wiley in Advanced Materials Technologies
- Vol. 9 (15)
3D Printing of Succulent‐Inspired Microneedle Array for Enhanced Tissue Adhesion and Controllable Drug Release
Controllable and long‐term release remains a great challenge in current drug delivery systems. Benefiting from their efficient drug loading and painless administration, microneedles (MNs) have emerged as a promising platform for transdermal drug delivery, while they often fail to achieve long‐term tissue adhesion and controllable extended drug release. Here, 3D printing of an innovative MN patch is presented with succulent‐inspired responsive microstructures and light‐controllable long‐term release capability. The MN exhibits a reversible shrink‐swell volume change behavior in response to surrounding humidity, which enables sufficient mechanical strength for skin penetration under the shrinkage conditions and efficient long‐term adhesion when swollen in skin tissues. Moreover, the MN patch introduces a controllable long‐term drug release system, achieved through the integration of thiolated heparin (Hep‐SH) for sustained growth factor release and graphene oxide (GO) nanosheets for controlled drug release via near infrared (NIR) laser irradiation. The MN patches with growth factor loading have good biocompatibility and can promote the proliferation, migration, and proangiogenesis of endothelial cells is further demonstrated. Thus, it is believed that such flexible MN patches can be promising candidates for controllable long‐term transdermal drug delivery as well as other related tissue engineering applications.
- 7 May 2024
- Published by Wiley in Advanced Materials Technologies
- Vol. 9 (15)
Open Access3D Printing of Succulent‐Inspired Microneedle Array for Enhanced Tissue Adhesion and Controllable Drug Release
Controllable and long‐term release remains a great challenge in current drug delivery systems. Benefiting from their efficient drug loading and painless administration, microneedles (MNs) have emerged as a promising platform for transdermal drug delivery, while they often fail to achieve long‐term tissue adhesion and controllable extended drug release. Here, 3D printing of an innovative MN patch is presented with succulent‐inspired responsive microstructures and light‐controllable long‐term release capability. The MN exhibits a reversible shrink‐swell volume change behavior in response to surrounding humidity, which enables sufficient mechanical strength for skin penetration under the shrinkage conditions and efficient long‐term adhesion when swollen in skin tissues. Moreover, the MN patch introduces a controllable long‐term drug release system, achieved through the integration of thiolated heparin (Hep‐SH) for sustained growth factor release and graphene oxide (GO) nanosheets for controlled drug release via near infrared (NIR) laser irradiation. The MN patches with growth factor loading have good biocompatibility and can promote the proliferation, migration, and proangiogenesis of endothelial cells is further demonstrated. Thus, it is believed that such flexible MN patches can be promising candidates for controllable long‐term transdermal drug delivery as well as other related tissue engineering applications.