Chenxi You
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Chenxi You has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Pengyu Lv
Peking University
6 shared publications - Huiling Duan
Peking University
5 shared publications - Hongyuan Li
Peking University
4 shared publications - Chao Sun
Tsinghua University
2 shared publications - Guo-Qing Chen
College of Shipbuilding Engineering, Harbin Engineering University, Harbin 150001, People’s Republic of China
2 shared publications - Xiaochao Liu
Peking University, China
2 shared publications
Latest Publications
- 3 November 2026
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1046, A42
Slip boundary condition incorporating near-wall inertial effects in Taylor–Couette turbulence
Effective slip boundary conditions have proven effective in mechanistic interpretation and predictive modelling over micro-textured drag-reducing surfaces at moderate Reynolds numbers, but their accuracy deteriorates as the texture size and flow rate increase. Torque measurements and direct numerical simulations of Taylor–Couette turbulence over patterned slip surfaces show that this breakdown occurs in a large-texture, high-turbulence regime in which near-wall inertial convection is no longer negligible. Decomposition of angular-momentum transport reveals a near-wall modulated layer where convection is dominated by surface-induced secondary vortices, in contrast to the outer region where turbulent mixing and Taylor rolls govern the transport. Spectral kinetic-energy analysis further shows that spanwise heterogeneity generates wall modes at the texture wavenumber, which undergo self-interaction within the modulated layer and couple to the outer large-scale circulation through cascade-like transfer in the outer region. Motivated by these observations, the slip-only boundary model is extended by introducing an effective near-wall turbulent viscosity, nu Subscript t comma italic eff $\nu _{t,\textit{eff}}$ , to represent the convective correction. The resulting model links the texture parameters (texture width w Superscript plus $w^+$ and solid fraction phi Subscript s $\phi _s$ ) to the effective coefficients (wall slip upper U Subscript s $U_s$ and nu Subscript t comma italic eff $\nu _{t,\textit{eff}}$ ), and thereby to the skin-friction coefficient upper C Subscript f $C_f$ . This model captures the observed transition in effective slip scaling from a viscous-dominated regime tilde left parenthesis w Superscript plus Baseline right parenthesis Superscript 3 divided by 4 ${\sim}(w^+)^{3/4}$ to an inertial-affected regime tilde left parenthesis w Superscript plus Baseline right parenthesis Superscript 1 divided by 4 ${\sim}(w^+)^{1/4}$ , thus providing a predictive effective-boundary framework in turbulence over patterned slip surfaces.- 3 November 2026
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1046, A42
Slip boundary condition incorporating near-wall inertial effects in Taylor–Couette turbulence
Effective slip boundary conditions have proven effective in mechanistic interpretation and predictive modelling over micro-textured drag-reducing surfaces at moderate Reynolds numbers, but their accuracy deteriorates as the texture size and flow rate increase. Torque measurements and direct numerical simulations of Taylor–Couette turbulence over patterned slip surfaces show that this breakdown occurs in a large-texture, high-turbulence regime in which near-wall inertial convection is no longer negligible. Decomposition of angular-momentum transport reveals a near-wall modulated layer where convection is dominated by surface-induced secondary vortices, in contrast to the outer region where turbulent mixing and Taylor rolls govern the transport. Spectral kinetic-energy analysis further shows that spanwise heterogeneity generates wall modes at the texture wavenumber, which undergo self-interaction within the modulated layer and couple to the outer large-scale circulation through cascade-like transfer in the outer region. Motivated by these observations, the slip-only boundary model is extended by introducing an effective near-wall turbulent viscosity, nu Subscript t comma italic eff $\nu _{t,\textit{eff}}$ , to represent the convective correction. The resulting model links the texture parameters (texture width w Superscript plus $w^+$ and solid fraction phi Subscript s $\phi _s$ ) to the effective coefficients (wall slip upper U Subscript s $U_s$ and nu Subscript t comma italic eff $\nu _{t,\textit{eff}}$ ), and thereby to the skin-friction coefficient upper C Subscript f $C_f$ . This model captures the observed transition in effective slip scaling from a viscous-dominated regime tilde left parenthesis w Superscript plus Baseline right parenthesis Superscript 3 divided by 4 ${\sim}(w^+)^{3/4}$ to an inertial-affected regime tilde left parenthesis w Superscript plus Baseline right parenthesis Superscript 1 divided by 4 ${\sim}(w^+)^{1/4}$ , thus providing a predictive effective-boundary framework in turbulence over patterned slip surfaces.- 29 October 2026
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1046, A23
Scaling law for ventilated air layers modulated by superhydrophobic grooves
An innovative air-layer establishment method is developed and experimentally investigated, where superhydrophobic transverse grooves are introduced to modulate localised minimal-flux ventilation. The results demonstrate that, owing to the modulation by the transverse grooves, the characteristics of multiphase flow undergo a fundamental transition from discrete bubbles to a continuous air layer. This modulation is strictly governed by both the free-stream velocity and the groove size, expressed as Reynolds number ( italic Re Subscript upper D $\textit{Re}_D$ ) and dimensionless groove size ( delta Superscript asterisk $\delta ^*$ ), respectively. With a systematic variation in italic Re Subscript upper D $\textit{Re}_D$ and delta Superscript asterisk $\delta ^*$ , the macroscopic topology of the air layer evolves through three distinct regimes: (i) continuous air layer (CAL), (ii) partial air layer (PAL) and (iii) bubble shedding (BS). The boundaries for these regimes are delineated within the regime map constructed by italic Re Subscript upper D $\textit{Re}_D$ and delta Superscript asterisk $\delta ^*$ . It is established that size effects are negligible for the CAL–PAL transition, whereas the transition from PAL to BS exhibits a pronounced dependence on delta Superscript asterisk $\delta ^*$ . The two regime transitions therefore follow distinct scaling relations. Neither transition boundary shows a discernible dependence on the solid fraction of the grooves. The dependence of regime transitions on ventilation flux is further examined, and the Weber number ( upper W e Subscript j $We_j$ ) is introduced to characterise the competition of the dynamic pressure of injected gas and the capillary force within grooves. The drag-reduction effectiveness of the groove-modulated air layers was also demonstrated. The present findings elucidate the mechanisms of air-layer establishment and provide a robust framework for the design of superhydrophobic grooved surfaces in air-layer drag-reduction applications.- 29 October 2026
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1046, A23
Scaling law for ventilated air layers modulated by superhydrophobic grooves
An innovative air-layer establishment method is developed and experimentally investigated, where superhydrophobic transverse grooves are introduced to modulate localised minimal-flux ventilation. The results demonstrate that, owing to the modulation by the transverse grooves, the characteristics of multiphase flow undergo a fundamental transition from discrete bubbles to a continuous air layer. This modulation is strictly governed by both the free-stream velocity and the groove size, expressed as Reynolds number ( italic Re Subscript upper D $\textit{Re}_D$ ) and dimensionless groove size ( delta Superscript asterisk $\delta ^*$ ), respectively. With a systematic variation in italic Re Subscript upper D $\textit{Re}_D$ and delta Superscript asterisk $\delta ^*$ , the macroscopic topology of the air layer evolves through three distinct regimes: (i) continuous air layer (CAL), (ii) partial air layer (PAL) and (iii) bubble shedding (BS). The boundaries for these regimes are delineated within the regime map constructed by italic Re Subscript upper D $\textit{Re}_D$ and delta Superscript asterisk $\delta ^*$ . It is established that size effects are negligible for the CAL–PAL transition, whereas the transition from PAL to BS exhibits a pronounced dependence on delta Superscript asterisk $\delta ^*$ . The two regime transitions therefore follow distinct scaling relations. Neither transition boundary shows a discernible dependence on the solid fraction of the grooves. The dependence of regime transitions on ventilation flux is further examined, and the Weber number ( upper W e Subscript j $We_j$ ) is introduced to characterise the competition of the dynamic pressure of injected gas and the capillary force within grooves. The drag-reduction effectiveness of the groove-modulated air layers was also demonstrated. The present findings elucidate the mechanisms of air-layer establishment and provide a robust framework for the design of superhydrophobic grooved surfaces in air-layer drag-reduction applications.- 1 June 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (6)
Study of vortex motions over an inclined plate with periodic oscillating microstructures
The surfaces of many animals and plants in nature are covered with deformable microstructures that engage in complex fluid–structure interactions and thereby control the flow. However, our understanding of the physical mechanisms by which these deformable microstructures regulate the flow remains limited. In this work, a bioinspired surface with periodically oscillating microstructures is designed to investigate how microstructures influence the flow over an inclined plate. The study employs a simplified model inspired by the dermal denticles of shark skin, and a method combining the immersed boundary method and the lattice Boltzmann flux solver is conducted for two-dimensional numerical simulations. The Reynolds number based on the plate chord and the incoming flow velocity is 2.0×104. The results show that changing the oscillation amplitude and frequency of the microstructures can effectively control the drag. With increasing frequency and amplitude, the drag reduction rate increases and reaches a maximum of 47.5%. The flow over different cases can be classified into two regimes, which are the coherent vortex shedding regime and the isolated vortex shedding regime. With large microstructure frequency and amplitude, the isolated vortex shedding regime appears and a substantial drag reduction is reached. In this regime, the microstructures periodically modulate the flow field near the leading edge, causing the characteristic frequency of the flow to become locked to the structural oscillation frequency. A parameter combining the microstructure frequency and amplitude is analyzed to predict the flow regime for different cases.
- 1 June 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (6)
Study of vortex motions over an inclined plate with periodic oscillating microstructures
The surfaces of many animals and plants in nature are covered with deformable microstructures that engage in complex fluid–structure interactions and thereby control the flow. However, our understanding of the physical mechanisms by which these deformable microstructures regulate the flow remains limited. In this work, a bioinspired surface with periodically oscillating microstructures is designed to investigate how microstructures influence the flow over an inclined plate. The study employs a simplified model inspired by the dermal denticles of shark skin, and a method combining the immersed boundary method and the lattice Boltzmann flux solver is conducted for two-dimensional numerical simulations. The Reynolds number based on the plate chord and the incoming flow velocity is 2.0×104. The results show that changing the oscillation amplitude and frequency of the microstructures can effectively control the drag. With increasing frequency and amplitude, the drag reduction rate increases and reaches a maximum of 47.5%. The flow over different cases can be classified into two regimes, which are the coherent vortex shedding regime and the isolated vortex shedding regime. With large microstructure frequency and amplitude, the isolated vortex shedding regime appears and a substantial drag reduction is reached. In this regime, the microstructures periodically modulate the flow field near the leading edge, causing the characteristic frequency of the flow to become locked to the structural oscillation frequency. A parameter combining the microstructure frequency and amplitude is analyzed to predict the flow regime for different cases.
- 1 November 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (11)
Effects of surface microstructures on cavity dynamics during vertical water entry of cylinders
This study experimentally and theoretically investigates the effects of surface microstructures on cavity dynamics during vertical water entry of cylindrical bodies. Experimental results indicate that surface microstructures enable rapid cavity expansion during the initial phase of water entry and overcome original characteristic length constraints. Furthermore, the Froude number (Fr) is a critical parameter influencing cavity morphology. Over the tested range, the pinch-off depth of the cavity formed by the cylinders with microstructures still obeys the Fr13scaling law, the microstructured surfaces mainly accelerate the formation of larger cavities. Consistently, as Fr increases, the pinch-off depth, pinch-off time, and cavity growth rate significantly increase, facilitating the formation of a complete cavity envelope in water. This cavity evolution, resulting from the enhanced slip effect identified in our theoretical analysis, transforms the no-slip boundary condition at the solid–liquid interface into a slip condition at the gas–liquid interface, thereby enhancing cavity-liquid coupling dynamics and enriching subsequent water entry behavior. Overall, these findings indicate the role of microstructured surfaces in modulating hydrodynamic interactions, offering insights for designing advanced microstructured surfaces to optimize drag reduction, enhance stability, and improve performance in trans-media vehicles.
- 1 November 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (11)
Effects of surface microstructures on cavity dynamics during vertical water entry of cylinders
This study experimentally and theoretically investigates the effects of surface microstructures on cavity dynamics during vertical water entry of cylindrical bodies. Experimental results indicate that surface microstructures enable rapid cavity expansion during the initial phase of water entry and overcome original characteristic length constraints. Furthermore, the Froude number (Fr) is a critical parameter influencing cavity morphology. Over the tested range, the pinch-off depth of the cavity formed by the cylinders with microstructures still obeys the Fr13scaling law, the microstructured surfaces mainly accelerate the formation of larger cavities. Consistently, as Fr increases, the pinch-off depth, pinch-off time, and cavity growth rate significantly increase, facilitating the formation of a complete cavity envelope in water. This cavity evolution, resulting from the enhanced slip effect identified in our theoretical analysis, transforms the no-slip boundary condition at the solid–liquid interface into a slip condition at the gas–liquid interface, thereby enhancing cavity-liquid coupling dynamics and enriching subsequent water entry behavior. Overall, these findings indicate the role of microstructured surfaces in modulating hydrodynamic interactions, offering insights for designing advanced microstructured surfaces to optimize drag reduction, enhance stability, and improve performance in trans-media vehicles.
- 19 November 2024
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 999, A63
Friction drag reduction of Taylor–Couette flow over air-filled microgrooves
Reducing drag under high turbulence is a critical but challenging issue that has engendered great concern. This study utilizes hydrophilic tips in superhydrophobic (SHP) grooves to enhance the stability of plastron, which results in a considerable drag reduction ( $DR$ ) up to 62 %, at Reynolds number ( $Re$ ) reaching $2.79 \times 10^{4}$ . The effect of the spacing width $w$ of the microgrooves on both $DR$ and flow structures is investigated. Experimental results demonstrate that $DR$ increases as either microgroove spacing $w$ or $Re$ increases. The velocity fields obtained using particle image velocimetry indicate that the air-filled SHP grooves induce a considerable wall slip. This slip significantly weakens the intensity of Taylor rolls, reduces local momentum transport, and consequently lowers drag. This phenomenon becomes more pronounced with increasing $w$ . Furthermore, to quantify the multiscale relationship between global response and geometrical as well as driving parameters, $DR\sim (w, \phi _s, Re)$ , a theoretical model is established based on angular momentum defect theory and magnitude estimate. It is demonstrated that a decrease in the surface solid fraction can reduce wall shear, and an increase in the groove width can weaken turbulence kinetic energy production, rendering enhanced slip and drag reduction. This research has implications for designing and optimizing turbulent-drag-reducing surfaces in various engineering applications, such as transportation and marine engineering.- 19 November 2024
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 999, A63
Friction drag reduction of Taylor–Couette flow over air-filled microgrooves
Reducing drag under high turbulence is a critical but challenging issue that has engendered great concern. This study utilizes hydrophilic tips in superhydrophobic (SHP) grooves to enhance the stability of plastron, which results in a considerable drag reduction ( $DR$ ) up to 62 %, at Reynolds number ( $Re$ ) reaching $2.79 \times 10^{4}$ . The effect of the spacing width $w$ of the microgrooves on both $DR$ and flow structures is investigated. Experimental results demonstrate that $DR$ increases as either microgroove spacing $w$ or $Re$ increases. The velocity fields obtained using particle image velocimetry indicate that the air-filled SHP grooves induce a considerable wall slip. This slip significantly weakens the intensity of Taylor rolls, reduces local momentum transport, and consequently lowers drag. This phenomenon becomes more pronounced with increasing $w$ . Furthermore, to quantify the multiscale relationship between global response and geometrical as well as driving parameters, $DR\sim (w, \phi _s, Re)$ , a theoretical model is established based on angular momentum defect theory and magnitude estimate. It is demonstrated that a decrease in the surface solid fraction can reduce wall shear, and an increase in the groove width can weaken turbulence kinetic energy production, rendering enhanced slip and drag reduction. This research has implications for designing and optimizing turbulent-drag-reducing surfaces in various engineering applications, such as transportation and marine engineering.- 1 May 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (5)
Regulating turbulent separation by surface microstructures on a blunt plate
Microstructured surfaces can induce secondary flow and regulate flow structures of the turbulent separation flow. However, the mechanism governing the relationship between the microstructure size and the characteristic flow size remains unclear. In this study, the separated flow over a blunt flat plate with surface microstructures is studied using time-resolved particle image velocimetry experiments and implicit large-eddy simulations for the plate-thickness-based Reynolds number from 5.08×103 to 1.31×104. The ratio of the height of microstructures to the plate thickness (h/d) ranges from 0.01 to 0.1. Combining experimental and numerical results, the relationships between the separation bubble size and the microstructure size under different Reynolds numbers exhibit similarity when normalized by the separation bubble size of the smooth plate. The dimensionless separation bubble size decreases when the microstructure height increases and large microstructures (h/d = 0.1) exhibit good performance on reducing the flow separation. Near the leading edge, the distortion of two-dimensional vortices and the generation of three-dimensional hairpin vortices are promoted by the first several rows of large microstructures. Additionally, in the main separation region, secondary positive spanwise vortices emerge from large microstructures. Subsequently, the secondary vortices lift up and evolve into streamwise vortices. The characteristic scale of secondary vortices is represented by a significant peak in the spectra of spanwise wavenumbers, which is of the same magnitude as the height of large microstructures. Furthermore, increasing the microstructure height weakens the streamwise correlation of the flow, and the characteristic scale of the correlation is comparable to the height of large microstructures.
- 1 May 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (5)
Regulating turbulent separation by surface microstructures on a blunt plate
Microstructured surfaces can induce secondary flow and regulate flow structures of the turbulent separation flow. However, the mechanism governing the relationship between the microstructure size and the characteristic flow size remains unclear. In this study, the separated flow over a blunt flat plate with surface microstructures is studied using time-resolved particle image velocimetry experiments and implicit large-eddy simulations for the plate-thickness-based Reynolds number from 5.08×103 to 1.31×104. The ratio of the height of microstructures to the plate thickness (h/d) ranges from 0.01 to 0.1. Combining experimental and numerical results, the relationships between the separation bubble size and the microstructure size under different Reynolds numbers exhibit similarity when normalized by the separation bubble size of the smooth plate. The dimensionless separation bubble size decreases when the microstructure height increases and large microstructures (h/d = 0.1) exhibit good performance on reducing the flow separation. Near the leading edge, the distortion of two-dimensional vortices and the generation of three-dimensional hairpin vortices are promoted by the first several rows of large microstructures. Additionally, in the main separation region, secondary positive spanwise vortices emerge from large microstructures. Subsequently, the secondary vortices lift up and evolve into streamwise vortices. The characteristic scale of secondary vortices is represented by a significant peak in the spectra of spanwise wavenumbers, which is of the same magnitude as the height of large microstructures. Furthermore, increasing the microstructure height weakens the streamwise correlation of the flow, and the characteristic scale of the correlation is comparable to the height of large microstructures.