Ayushi Sharma
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ayushi Sharma has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Yogesh Singh Chauhan
Indian Institute of Technology (IIT) Kanpur
4 shared publications - Chenming Hu
International College of Semiconductor Technology, National Yang Ming Chiao Tung University, Hsinchu, Taiwan
3 shared publications - Chetan Kumar Dabhi
Department of Electrical Engineering and Computer Sciences (EECS), University of California, Berkeley, CA, USA
3 shared publications - Girish Pahwa
International College of Semiconductor Technology, National Yang Ming Chiao Tung University, Hsinchu, Taiwan
3 shared publications - Ravi Goel
Department of Electrical Engineering, IIT Kanpur, Kanpur, India
2 shared publications - Volker Kubrak
Design Enabling Services, Infineon Technologies AG, Neubiberg, Germany
2 shared publications
Latest Publications
- Open Access
- 28 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of the Electron Devices Society
- Vol. 13, 1243-1251
Characterization and Modeling of SH in Multi-Finger RF LDMOS Transistors Using BSIM-BULK Model
In this work, we present self-heating (SH) characterization and modeling of 130 nm Bipolar-CMOS-DMOS (BCD) technology node multi-finger Laterally Diffused Metal-Oxide-Semiconductor (LDMOS) transistors using extensive DC and S-parameter measurements. To accurately capture the impact of SH across a wide frequency range, we use a fourth-order thermal network within the industry-standard Berkeley Short-channel IGFET (BSIM)-BULK model framework. Additionally, we analyze the frequency behavior of RF bulk multi-finger LDMOS transistors and capture parasitic effects due to substrate and gate network. Our findings provide significant insights into LDMOS transistors. In particular, increasing the finger count reduces thermal resistance (by 6.6,∘C/Watt). Understanding how thermal resistance varies with finger count allows designers to optimize LDMOS layouts and mitigate SH effects. This leads to improved thermal management and more efficient, reliable RF devices.
- 28 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of the Electron Devices Society
- Vol. 13, 1243-1251
Open AccessCharacterization and Modeling of SH in Multi-Finger RF LDMOS Transistors Using BSIM-BULK Model
In this work, we present self-heating (SH) characterization and modeling of 130 nm Bipolar-CMOS-DMOS (BCD) technology node multi-finger Laterally Diffused Metal-Oxide-Semiconductor (LDMOS) transistors using extensive DC and S-parameter measurements. To accurately capture the impact of SH across a wide frequency range, we use a fourth-order thermal network within the industry-standard Berkeley Short-channel IGFET (BSIM)-BULK model framework. Additionally, we analyze the frequency behavior of RF bulk multi-finger LDMOS transistors and capture parasitic effects due to substrate and gate network. Our findings provide significant insights into LDMOS transistors. In particular, increasing the finger count reduces thermal resistance (by 6.6,∘C/Watt). Understanding how thermal resistance varies with finger count allows designers to optimize LDMOS layouts and mitigate SH effects. This leads to improved thermal management and more efficient, reliable RF devices.
- Open Access
- 14 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of the Electron Devices Society
- Vol. 13, 863-869
Impact Ionization in LDMOS Transistors: Improved Compact Model and Asymmetry Under Forward and Reverse Modes of Operation
This study proposes improved compact models for impact ionization in the intrinsic and drift regions of Laterally-Diffused-Metal-Oxide-Semiconductor (LDMOS) transistors. These models are rigorously validated across a wide range of high drain and gate voltages for different channel widths, demonstrating their robustness and applicability. The model flexibility is further enhanced by incorporating a control feature that precisely regulates the progression of drain current to drift saturation current under high drain bias. Furthermore, the inherent asymmetry of the LDMOS device results in substrate current under forward (Vds>0V) and reverse (Vds<0V) modes differing by orders of magnitude. Therefore, we also introduce a compact model for reverse mode impact ionization current in LDMOS transistors, addressing this discrepancy. Finally, we integrate the proposed impact ionization current model into the existing Verilog-A framework of the BSIM-BULK high voltage compact model, ensuring compatibility with SPICE simulators.
- 14 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of the Electron Devices Society
- Vol. 13, 863-869
Open AccessImpact Ionization in LDMOS Transistors: Improved Compact Model and Asymmetry Under Forward and Reverse Modes of Operation
This study proposes improved compact models for impact ionization in the intrinsic and drift regions of Laterally-Diffused-Metal-Oxide-Semiconductor (LDMOS) transistors. These models are rigorously validated across a wide range of high drain and gate voltages for different channel widths, demonstrating their robustness and applicability. The model flexibility is further enhanced by incorporating a control feature that precisely regulates the progression of drain current to drift saturation current under high drain bias. Furthermore, the inherent asymmetry of the LDMOS device results in substrate current under forward (Vds>0V) and reverse (Vds<0V) modes differing by orders of magnitude. Therefore, we also introduce a compact model for reverse mode impact ionization current in LDMOS transistors, addressing this discrepancy. Finally, we integrate the proposed impact ionization current model into the existing Verilog-A framework of the BSIM-BULK high voltage compact model, ensuring compatibility with SPICE simulators.
- 15 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 71 (7) , 4240-4246
Compact Modeling of Impact Ionization and Conductivity Modulation in LDMOS Transistors
Space charge modulation (SCM), that is, the increase of charge carriers in the drift region, modulates carrier concentration in the drift region, which results in conductivity modulation (also known as the expansion effect) of laterally double-diffused metal oxide semiconductor (LDMOS) transistors. In this work: 1) a compact model for conductivity modulation is presented. Since conductivity modulation also causes a change in internal node voltage ( ${d}_{i}$ ), therefore physics in the impact ionization model of drift region which accurately captures the change in node voltage is also included; 2) an improved model of impact ionization for the intrinsic region of LDMOS transistors ( ${d}_{i}$ ) is discussed and validated across a high drain voltage for different gate voltages; 3) the topology of the substrate current flow has been modified, in accordance with the device physics; and 4) finally, this work also includes the improved model of the impact ionization to capture the body bias effect in LDMOS transistors. The new model is extensively validated with the experimental and TCAD data. The research aims to enhance the industry-standard Berkeley short-channel IGFET model-bulk (BSIM-BULK) model, ensuring compatibility with SPICE simulators.
- 15 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 71 (7) , 4240-4246
Compact Modeling of Impact Ionization and Conductivity Modulation in LDMOS Transistors
Space charge modulation (SCM), that is, the increase of charge carriers in the drift region, modulates carrier concentration in the drift region, which results in conductivity modulation (also known as the expansion effect) of laterally double-diffused metal oxide semiconductor (LDMOS) transistors. In this work: 1) a compact model for conductivity modulation is presented. Since conductivity modulation also causes a change in internal node voltage ( ${d}_{i}$ ), therefore physics in the impact ionization model of drift region which accurately captures the change in node voltage is also included; 2) an improved model of impact ionization for the intrinsic region of LDMOS transistors ( ${d}_{i}$ ) is discussed and validated across a high drain voltage for different gate voltages; 3) the topology of the substrate current flow has been modified, in accordance with the device physics; and 4) finally, this work also includes the improved model of the impact ionization to capture the body bias effect in LDMOS transistors. The new model is extensively validated with the experimental and TCAD data. The research aims to enhance the industry-standard Berkeley short-channel IGFET model-bulk (BSIM-BULK) model, ensuring compatibility with SPICE simulators.
- 11 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Recent Enhancements in the Standard BSIM-BULK MOSFET Model
This paper briefly discusses all the recent enhancements made in the BSIM-BULK MOSFET model. It is a charge-based industry-standard model developed by the BSIM group, an advanced version of BSIM4 model (threshold voltage-based). Initially, BSIM-BULK was developed for low-voltage devices and to enhance its capability for high voltage operations, a drift resistance-based model is also included as one of the important enhancements in its recent version. Moreover, the new model for bulk charge effect in the latest version improves the fitting flexibility of current and capacitance models. Several other noticeable enhancements are body bias and gate bias dependence addition to the high voltage model, improved flicker noise model of MOSFET and EDGEFET, adding flicker noise model due to external S/D resistances, and drain-body diode junction current splitting in HVMOS. All the enhancements have been validated with the experimental data and also passed the Gummel and AC symmetry tests. The latest model has better accuracy, convergence, and performance compared to previous versions of BSIM-BULK model.
- 11 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Recent Enhancements in the Standard BSIM-BULK MOSFET Model
This paper briefly discusses all the recent enhancements made in the BSIM-BULK MOSFET model. It is a charge-based industry-standard model developed by the BSIM group, an advanced version of BSIM4 model (threshold voltage-based). Initially, BSIM-BULK was developed for low-voltage devices and to enhance its capability for high voltage operations, a drift resistance-based model is also included as one of the important enhancements in its recent version. Moreover, the new model for bulk charge effect in the latest version improves the fitting flexibility of current and capacitance models. Several other noticeable enhancements are body bias and gate bias dependence addition to the high voltage model, improved flicker noise model of MOSFET and EDGEFET, adding flicker noise model due to external S/D resistances, and drain-body diode junction current splitting in HVMOS. All the enhancements have been validated with the experimental data and also passed the Gummel and AC symmetry tests. The latest model has better accuracy, convergence, and performance compared to previous versions of BSIM-BULK model.