BDBill DiGuiseppi

Bill DiGuiseppi

*This is an algorithmically generated author record based on publicly available information.

Bill DiGuiseppi has a total of 43 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Trifluoroacetic Acid (TFA) in the Environment: Occurrence, Persistence, and Treatment

    by Jenny E. Zenobio, Faezeh Pazoki, Chris McCarthy, Bill DiGuiseppi, Sheau‐Yun (Dora) Chiang

    Trifluoroacetic acid (TFA) is an ultrashort‐chain perfluoroalkyl acid characterized by high mobility, environmental persistence, and resistance to conventional treatment and natural attenuation. It is widely detected in precipitation, surface water, groundwater, and drinking water, and often dominates per‐ and polyfluoroalkyl substances (PFAS) profiles in aqueous systems. This study synthesizes available data on TFA occurrence, toxicity, and treatment to evaluate its environmental behavior and management challenges. Toxicity data indicate low intrinsic toxicity across aquatic, terrestrial, and mammalian systems, with effects observed at concentrations well above typical environmental levels. Interpretation remains limited by variability in analytical methods and gaps in long‐term and cross‐species data. Treatment technologies developed for legacy PFAS are largely ineffective for TFA. Sorption‐ and interfacial‐based processes provide negligible removal, while separation processes, such as reverse osmosis, concentrate TFA into residual streams. Many oxidative, electrochemical, and plasma‐based systems do not achieve mineralization and may generate TFA as a terminal product. Only a limited number of technologies demonstrate defluorination under controlled conditions, with hydrothermal alkaline treatment (referred to as HALT) among the few approaches achieving complete defluorination. Overall, TFA represents a practical limitation of current PFAS management strategies, with persistence through treatment systems likely leading to increasing dominance in treated waters and expansion of diffuse plumes.


  • Deciphering PFAS in Rainwater: Sources, Distribution, and Environmental Impact

    by Jenny E. Zenobio, Blossom N. Nzeribe, Mark Hilyard, Bill DiGuiseppi

    Per‐ and polyfluoroalkyl substances (PFAS) are stable, globally dispersed man‐made compounds used in a wide range of industrial processes and commercial products. Their persistence and mobility in the global environment are attributed to their chemical stability and various atmospheric pathways. PFAS may enter the atmosphere from multiple sources, including stack emissions, fugitive dust, surface water aerosolization, and even entrainment of wind‐born fire suppression foam. Upon entry into the air, they travel through the gas phase as aerosols and particle‐bound processes. Volatile precursor compounds such as fluorotelomer alcohols (FTOHs) and short‐chain PFAS can exist in the gas phase, while longer‐chain, ionized PFAS are typically transported as aerosols, on particulates, or as foam. PFAS are subsequently deposited through wet deposition (e.g., scavenging by raindrops) or dry deposition (e.g., settling of aerosols and particulates), contributing to their presence in soil, surface water, and groundwater at locations distant from the point of generation. Rainwater, in particular, serves as a key pathway for PFAS input to environmental media. This literature review synthesizes the outcomes of studies in 13 US states that examined the occurrence, transport, and deposition of PFAS via precipitation. Legacy compounds (e.g., PFOA, PFOS) and emerging short‐chain PFAS (e.g., trifluoroacetic acid [TFA], hexafluoropropylene oxide dimer acid [HFPO‐DA]) have been detected in rainwater, with evolving profiles reflecting regulation and shifting manufacturing practices. The persistent presence of TFA, especially, emphasizes its atmospheric persistence and worldwide distribution. Concentration patterns of PFAS are regionally variable, with high concentrations typically detected at urban and industrial sites and detectable ambient levels in remote regions, suggesting PFAS in precipitation may be a combination of both local sources and long‐range atmospheric transport. The types of precipitation events could play important roles in PFAS deposition. Stratiform events may collect more extensive regional inputs, whereas convective storms may be more efficient at collecting local emissions and fugitive dust, resulting in higher local PFAS concentrations. Urban surface runoff, which effectively collects precipitation over a large area, has the potential to be an adjunct or even predominant pathway of PFAS transport to receiving waters. In total, this review articulates the complexity of atmospheric PFAS occurrence and highlights the importance of integrated monitoring, source attribution, and varied regulatory approaches in addressing the environmental issues and public health concerns associated with PFAS deposition via precipitation.


  • Comparison of Environmental Footprint for Per‐ and Polyfluoroalkyl Substances Liquids and Solids Treatment Technologies

    by Paige Molzahn, Betsy Collins, William DiGuiseppi

    Per‐ and polyfluoroalkyl substances (PFAS) contamination is a critical worldwide issue due to their widespread industrial use and persistence in the environment. PFAS treatment technologies are being applied to address the challenges associated with these substances. Selection of the appropriate treatment technology requires the assessment of many variables before full‐scale implementation. Factors such as cost, effectiveness, availability, and expected treatment duration are commonly considered; however, it is important to also consider the environmental footprint, which is the impact on the environment from the energy and materials used in implementing the treatment technology itself. The low PFAS treatment levels promulgated thus far, such as US Environmental Protection Agency drinking water Maximum Contaminant Levels of 4 ng/L for perfluorooctane sulfonate and perfluorooctanoic acid, as well as future low cleanup standards for other compounds and impacted media, will require long‐term remedial actions. Understanding the environmental impacts for PFAS treatment technologies can provide additional insights to be considered during the remedy selection. The authors conducted a comparison study of a wide range of PFAS treatment technology types for both liquids and solids, operating under limited but realistic hypothetical scenarios. The results present the approximate expected greenhouse gas (GHG) emissions of each technology type and scenario, compared to one another for the treatment of two key target compounds: perfluorooctane sulfonate (PFOS) and perfluorooctanoic acid (PFOA). The liquid treatment technology types considered in this evaluation include technologies that concentrate or separate PFAS from the liquid media (such as ion exchange, granular activated carbon, and foam fractionation), technologies that destroy PFAS (such as supercritical water oxidation and electrochemical oxidation), and landfill disposal via solidification. In practice, remedial solutions for a given site might include both a concentration/separation step and a destruction step. These combinations were not evaluated in this comparison. The solids treatment technologies considered included thermal desorption, soil washing, soil stabilization, and excavation and disposal at a landfill. The factors included in each scenario were material production, material and equipment transportation, equipment and energy use, and material disposal, as these were considered to be the largest contributors to GHG emissions.


  • Available and emerging liquid treatment technologies for PFASs

    by William H. DiGuiseppi, Charles J. Newell, Grant Carey, Poonam R. Kulkarni, Zhiyong Xia, John Stults, Thomas L. Maher, Erika F. Houtz, Rebecca Mora, Rick Wice, et al.

    Per‐ and polyfluoroalkyl substances (PFASs) are present at a wide range of private sector facilities and United States (US) government installations, including those operated by the Department of Defense, the Department of Energy, the National Aeronauts and Space Administration, and other entities, as well as additional sites worldwide. Impacts have been identified in a range of environmental media including drinking water, groundwater, surface water, leachate, wastewater, soil, sediment, and soil gas. Treatment technologies to remove or destroy PFASs cost effectively have proven to be elusive to the industry. However, recent developments are bringing that goal close to reality for some media. This article has been prepared to address only liquid treatment technologies. Soil treatment technologies are presently a lower priority and may be addressed in future articles. The challenge of identifying and evaluating available and emerging liquid treatment technologies was put to the PFAS Experts Symposium in Houston, Texas, on June 7–8, 2023, which was attended by PFAS professionals and subject matter experts with a broad range of backgrounds. The discussions covered a variety of technical approaches and led to the preparation of this manuscript. This article strives to concisely summarize modern technical approaches that are potentially applicable to managing liquid media at PFAS‐impacted sites. Currently, ex situ sorbent technologies using granular activated carbon (GAC) and ion exchange (IX) resin are commercially available and most widely used. Other liquid technologies are summarized and current applications are presented to allow the reader to evaluate each technology for their particular use. This article is not intended to provide guidance on site‐specific design of treatment systems, but instead to serve as an update to earlier articles from this group and others addressing PFAS treatment technologies and related PFAS topics.


  • Open Access

    Implications of grouping per‐ and polyfluoroalkyl substances for contaminated site regulation

    by Karl C. Bowles, Janet K. Anderson, Richard (Hunter) Anderson, Bahman Bani, Craig M. Barnes, Mark Brusseau, Ian T. Cousins, Pamela Cushing, Bill DiGuiseppi, Bruce Gray, et al.

    Per‐ and polyfluoroalkyl substances (PFAS) are a broad group of persistent organic compounds with vastly differing physicochemical and toxicological properties. Some jurisdictions have proposed to regulate PFAS as a single class to overcome the limitations of regulating such a diverse group on a chemical‐by‐chemical basis. Implications of regulating PFAS as a single class have been discussed for PFAS production and use, but equivalent discussion of implications for managing contaminated sites is largely lacking. This opinion piece summarizes the views of a group of environmental consultants, environmental regulators, land managers, and academics with significant experience in researching or managing PFAS. The group considered that neither a single PFAS class approach nor a chemical‐by‐chemical approach is well suited to managing risks from PFAS in a contaminated site setting, and defining PFAS subgroups would have value. Second, some but not all in the group, hypothesize that PFAS properties that drive fate and transport are those that influence toxicity and bioaccumulation in animals. This may be a valuable observation for future discussions on dividing PFAS into subclasses for contaminated site regulation based on physicochemical properties rather than purely structural definitions.