Xiaoyi Guo

The study focuses on a key component of the Yangtze–Huaihe River Diversion Project—the Qiliqiao to Xincheng water supply pipeline section, which includes a megascale inverted siphon structure. A one‐dimensional mathematical model is developed to simulate water hammer phenomena in transmission pipelines containing the large siphon. A comparative analysis is conducted to evaluate the protective effects of linear and nonlinear valve closure strategies. The optimal valve closure scheme is explored by parameterizing the valve closing duration and buffering time. The impact of air valves installed near the inverted siphon during hydraulic transition processes is examined, and the transient variations of key hydraulic parameters during the entire valve closure operation are systematically characterized. Under long‐term operational conditions with Manning’s coefficient degradation, the designed pipeline maintains a hydraulic head surplus of 7.34 m, fully meeting long‐distance water supply requirements. Air valves effectively reduce the peak pressure magnitude by 80%. Under linear valve closure conditions, only the high‐elevation air valves exhibit significant exhaust behavior. In contrast, nonlinear closure strategies reduce the minimum internal pressure of the pipeline and suppress vaporization, thereby reducing the air valve discharge volume. Finally, the study identifies an optimal time coordination scheme by adjusting the closure timing of individual pumps and the interval between adjacent pump shutdowns.

Hydraulic transients in long-distance pressurized water pipelines significantly impact their normal operation. This study develops a one-dimensional mathematical model for pressurized water pipelines using the method of characteristics and incorporates water hammer equations for dual-pipeline systems. The model is validated with experimental data, and simulations are conducted under real engineering conditions, focusing on valve closure operations. The analysis examines the transient responses for varying valve closure times (T) and the effect of installing surge tanks. Results show that increasing valve closure time and installing surge tanks both mitigate water hammer impacts. Specifically, when valve closure time exceeds 300 seconds, surge tanks reduce maximum pressure below the pipeline’s tolerance (Pmax) and decrease the number of nodes experiencing damaging negative pressures. This model effectively simulates hydraulic transients in dual-pipeline systems and provides a foundation for developing protective measures for pipeline operations.

The pressure characteristics of long-distance water pipelines during hydraulic transient processes are crucial for ensuring the safe, stable, and long-term operation of water transfer projects. This paper establishes a one-dimensional mathematical model based on sections of the Yinjiangjihuai long-distance water diversion project in China. The water supply requirements of the pipelines are categorized into two replenishment modes as follows: gravity supply and pump-pressurized water supply. The opening and closing strategies of the water pipelines under different flow conditions are simulated and analyzed to explore the hydraulic transient processes under various water supply modes. The transient variations of key hydraulic parameters during valve closure are clarified. Simulation results indicate that the water pipeline design is reasonable, meeting the water supply demands at relatively low Manning values and that it has the capability for long-term supply. Due to the excessive head provided by the pumps, pump-pressurized water supply and gravity supply modes cannot operate simultaneously. Under gravity supply mode, the minimum pressure in the downstream pipeline is relatively higher overall, while the maximum pressure in the upstream pipeline is relatively lower overall. In the pump-pressurized water supply mode, the safety and stability of the water supply can be ensured by adjusting the closing time of individual pumps and the interval time between adjacent pumps. The research findings provide technical guidance and scientific basis for the construction of national water networks and water transfer projects.