Yuxi Zhao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yuxi Zhao has a total of 71 co-authors. Here are the top co-authors by number of shared publications:
- Bingcheng Chen
Department of Civil Engineering, Nanjing University of Science and Technology, Nanjing 210094, China
6 shared publications - Ligang Peng
Institute of Structural Engineering, Zhejiang University, Hangzhou 310058, China
5 shared publications - Yuzhou Wang
Institute of Structural Engineering, Zhejiang University, Hangzhou, 310058, Zhejiang, PR China
5 shared publications Ligang Peng
4 shared publications- Xu Miao4 shared publications
- Bin Jia3 shared publications
Latest Publications
- Open Access
- 29 September 2026
- Published by Elsevier in SSRN Electronic Journal
Phosphate-regulated internal carbonation of reactive MgO cement: Phase evolution, pore structure and mechanical performance
Reactive magnesia cement (RMC) is a promising low-carbon binder, but its strength development under ambient curing is limited by insufficient carbonate supply and inefficient product precipitation. This study develops an internally carbonated RMC system using a urease-prehydrolysed urea solution as the carbonate source and dipotassium hydrogen phosphate (DKP) to regulate Mg-bearing precipitation. The effects of the phosphate-to-carbonate molar ratio on reaction kinetics, phase assemblage, pore structure, microstructure and strength were systematically investigated. Internal carbonate supply redirected Mg from brucite-dominated hydration towards hydrated carbonate-bearing products, reducing porosity and improving strength. DKP produced a strongly non-monotonic response. At nP/nC = 0.5, the paste reached approximately 53 MPa at 28 d under ambient curing, accompanied by the highest XRD-amorphous fraction, the lowest mercury-accessible porosity and a fine, closely packed product assemblage. Raman spectroscopy further indicated a carbonate-dominant environment with an enhanced nesquehonite-associated contribution. In contrast, nP/nC = 2 promoted greater MgO consumption and struvite formation but produced a coarser pore-throat distribution and lower strength. These findings demonstrate that RMC performance is governed by Mg partitioning, product evolution and spatial assembly rather than reaction extent alone, providing a pathway towards high-performance ambient-cured RMC through internally regulated mineralization.
- 29 September 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessPhosphate-regulated internal carbonation of reactive MgO cement: Phase evolution, pore structure and mechanical performance
Reactive magnesia cement (RMC) is a promising low-carbon binder, but its strength development under ambient curing is limited by insufficient carbonate supply and inefficient product precipitation. This study develops an internally carbonated RMC system using a urease-prehydrolysed urea solution as the carbonate source and dipotassium hydrogen phosphate (DKP) to regulate Mg-bearing precipitation. The effects of the phosphate-to-carbonate molar ratio on reaction kinetics, phase assemblage, pore structure, microstructure and strength were systematically investigated. Internal carbonate supply redirected Mg from brucite-dominated hydration towards hydrated carbonate-bearing products, reducing porosity and improving strength. DKP produced a strongly non-monotonic response. At nP/nC = 0.5, the paste reached approximately 53 MPa at 28 d under ambient curing, accompanied by the highest XRD-amorphous fraction, the lowest mercury-accessible porosity and a fine, closely packed product assemblage. Raman spectroscopy further indicated a carbonate-dominant environment with an enhanced nesquehonite-associated contribution. In contrast, nP/nC = 2 promoted greater MgO consumption and struvite formation but produced a coarser pore-throat distribution and lower strength. These findings demonstrate that RMC performance is governed by Mg partitioning, product evolution and spatial assembly rather than reaction extent alone, providing a pathway towards high-performance ambient-cured RMC through internally regulated mineralization.
- 2 January 2026
- Published by Elsevier in Structures
- Vol. 84
Corrosion-driven durability degradation in prestressed concrete bridges
- 2 January 2026
- Published by Elsevier in Structures
- Vol. 84
Corrosion-driven durability degradation in prestressed concrete bridges
- Open Access
- 29 November 2025
- Published by Elsevier in Developments in the Built Environment
- Vol. 24
Towards durability zonation of concrete structures under regional atmospheric exposure conditions in Asia
- 29 November 2025
- Published by Elsevier in Developments in the Built Environment
- Vol. 24
Open AccessTowards durability zonation of concrete structures under regional atmospheric exposure conditions in Asia
- 16 November 2025
- Published by Elsevier in Structures
- Vol. 82
Flexural performance of lightweight aggregate concrete beams with high-volume waste glass powder
- 16 November 2025
- Published by Elsevier in Structures
- Vol. 82
Flexural performance of lightweight aggregate concrete beams with high-volume waste glass powder
- Open Access
- 27 September 2025
- Published by Purdue University Press
Recycling waste glass powder in lightweight aggregate concrete: Towards lightweight, sustainable and durable marine engineering structures
This study investigates the feasibility of incorporating waste glass powder (GP) as a sustainable supplementary cementitious material in structural lightweight aggregate concrete (SLAC) for marine applications. The effects of GP replacement (0–40%) on the fresh, mechanical, and durability properties were evaluated. Results showed that while GP reduces early-age strength, long-term mechanical stability is maintained, with GP20 achieving the highest elastic modulus. GP incorporation significantly improves durability, including reduced chloride migration, lower water absorption, and higher electrical resistivity. Corrosion resistance of steel bars under chloride exposure was enhanced, as indicated by higher open-circuit potential values (OCP). Microstructural analysis revealed that GP refines the pore structure and densifies the aggregate–matrix interface. These findings support the use of GP in producing low-carbon, durable SLAC for marine infrastructure.
- 27 September 2025
- Published by Purdue University Press
Open AccessRecycling waste glass powder in lightweight aggregate concrete: Towards lightweight, sustainable and durable marine engineering structures
This study investigates the feasibility of incorporating waste glass powder (GP) as a sustainable supplementary cementitious material in structural lightweight aggregate concrete (SLAC) for marine applications. The effects of GP replacement (0–40%) on the fresh, mechanical, and durability properties were evaluated. Results showed that while GP reduces early-age strength, long-term mechanical stability is maintained, with GP20 achieving the highest elastic modulus. GP incorporation significantly improves durability, including reduced chloride migration, lower water absorption, and higher electrical resistivity. Corrosion resistance of steel bars under chloride exposure was enhanced, as indicated by higher open-circuit potential values (OCP). Microstructural analysis revealed that GP refines the pore structure and densifies the aggregate–matrix interface. These findings support the use of GP in producing low-carbon, durable SLAC for marine infrastructure.