KWKaiyue Wu

Kaiyue Wu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Kaiyue Wu has a total of 29 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Numerical study on the effects of humidity on parallel-rod dielectric barrier discharge in atmospheric air

    by Liyang Zhang, Zihao Feng, Kaiyue Wu, Jiacun Wu, Yutai Li, Zhigang Liu, Yangyang Fu

    In this study, the impacts of humidity on a parallel-rod dielectric barrier discharge (DBD) in atmospheric humid air were numerically examined. Electron transport parameters across varying humidity levels were determined using the Boltzmann equation solver. The modulation effects of photoionization, dielectric permittivity, and secondary emission coefficient on the discharge characteristics under varying humidity levels were analyzed. For all studied conditions, higher humidity delays the streamer onset and reduces the streamer velocity and electron density. The streamer radius was found to initially increase and then decrease during propagation as humidity increases, a phenomenon attributed to the lateral distribution characteristics of the net ionization rate. For a typical condition, the streamer breakdown voltage increases linearly with humidity, with the breakdown field rising by approximately 1% at 100% relative humidity (RH) compared to 0% RH (at 300 K). Photoionization can advance the streamer onset and accelerate its propagation but has little influence on the breakdown voltage, and the impacts of humidity remain consistent with or without photoionization. A higher dielectric permittivity (εr = 4.2–8) can mitigate the impact of humidity, which is attributed to the decreased relative difference in the effective ionization coefficient (αeff) between high- and low-humidity conditions. The influence of humidity is slightly less significant as the secondary electron emission coefficient (γ) increases, primarily attributed to the enhancement of αeff under a higher γ. The above findings provide deeper insights into how humidity regulates streamer dynamics in DBD systems.


  • Open Access

    Plasma bullet splitting behavior of a positive streamer initiated in an atmospheric pressure argon plasma jet

    by Xuechen Li, Tingting Meng, Mo Chen, Jiacun Wu, Hui Sun, Junxia Ran, Xuexia Pang, Kaiyue Wu, Pengying Jia

    Atmospheric pressure plasma jet opens up extensive potential applications and becomes a hot issue in low temperature plasma research in which a guided streamer regime is normally involved. The dynamics of the streamer head (also referred to as a plasma bullet) are crucial to the distribution of active species. Previous studies have revealed that the guided streamer operates either in a single bullet (SB) mode or in a double bullet mode. In this paper, we report the streamer splits phenomenon in an argon plasma jet excited with a pulse voltage. Results indicate that the split of the plasma bullet only appears with a high voltage amplitude (Va), otherwise, the streamer always keeps in the SB mode. With increasing Va, the distance that the SB travels (ds) increases. With the addition of trace oxygen in the working gas, ds is reduced. However, the influence on ds with the addition of trace nitrogen can be ignored. Only when the flow rate of added nitrogen is high, ds is also reduced. Moreover, the intensities increase with increasing voltage amplitude, while the durations reduce for the discharges at the rising and falling edges of applied voltage. In addition, the spatial distributions of streamer velocity and plasma parameters are compared for the plasma jet with different Va. The split of the plasma bullet is attributed to the Penning ionization in the interfacial layer between the working argon stream and the ambient air.


  • Evolution from a guided-streamer mode to a continuous-discharge mode in an atmospheric pressure argon plasma jet

    by Jiacun Wu, Jinmao Li, Junyu Chen, Kaiyue Wu, Junxia Ran, Mo Chen, Pengying Jia, Xinran Kan, Lingsheng Yang, Xuechen Li


  • Open Access

    Numerical study on positive streamer in parallel-rod dielectric barrier discharge in atmospheric air

    by Liyang Zhang, Kaiyue Wu, Zhihang Zhao, Yutai Li, Zhigang Liu, Kai Wang, Yuntao Guo, Yuanyuan Jiang, Yangyang Fu

    In this work, a parallel-rod dielectric barrier discharge (DBD) operating in atmospheric air is investigated through the two-dimensional plasma fluid model. The effects of applied voltage (Vp), secondary electron emission coefficient (γ), and photoionization are examined. Photoionization can significantly influence streamer dynamics by accelerating and broadening both volumetric and surface streamers and enhance the impact of the applied voltage. Without photoionization, the propagation distance of the surface streamer along the curved dielectric surface is limited to 0.1–0.2 mm under applied voltages of 8–8.5 kV. In contrast, with photoionization, this distance can extend to 0.3–0.6 mm. Achieving the same distance requires much higher voltages (10–11 kV) if without photoionization. The “double-layer” structure of the surface streamer is investigated, revealing that γ predominantly affects the surface branch with little impact on the volumetric branch. The critical charge density for streamer onset is found to be about 1018 m−3, and the volume-to-surface streamer transition is attributed to the lateral electric field provided by the space charges. This work provides insights into the regulation strategies and underlying mechanisms of streamer dynamics in parallel-rod DBDs in atmospheric air.


  • Open Access

    A planar plume array emanating from an atmospheric pressure argon plasma jet employing floating electrodes

    by Kaiyue Wu, Mo Chen, Junxia Ran, Pengying Jia, Jiacun Wu, Xuechen Li

    Large-scale plasma plumes downstream of plasma jets are in urgent need from a practical viewpoint. In this Letter, an argon plasma jet with floating electrodes is proposed to produce a large-scale planar plume array. Results indicate that with increasing peak voltage (Vp), the planar plume array elongates gradually and scales up in the lateral direction to an optimal value of 90.0 mm. There is only one discharge pulse per voltage half cycle, whose intensity and duration increase with increasing Vp. Moreover, there is a time lag between the initiations of individual plumes. Fast photography reveals that the planar plume array originates from the repeated process of some micro-discharge filaments stretching along the argon stream. By optical emission spectroscopy, the spatial distribution of plasma parameters is obtained, such as electron density, electron temperature, and gas temperature. At last, the planar plume array is employed to test the surface modification of polyethylene terephthalate, for which a uniform modification has been realized with a scan velocity of 1.0 cm/min. These results are of great significance for the development of large-scale atmospheric pressure plasma sources.


  • Open Access

    Characterization and effectiveness of a miniaturized dielectric barrier discharge module for air disinfection

    by Dan Yu, Liyang Zhang, Kaiyue Wu, Peili Qiu, Kai Wang, Yangyang Fu

    Effective inactivation of airborne pathogens is crucial for air quality control and the prevention of infectious diseases, especially in indoor human-living environments. In this work, a novel air disinfector based on surface dielectric barrier discharge (DBD) plasma was proposed. The discharge characteristics and the disinfection performance of the disinfector were investigated under different applied voltages, airflow rates, and humidity. The used DBD mainly works in the O3-dominant product mode with a discharge power of 1–3 W. The decreases in N2(C-B) emission intensity, ozone, discharge power, and discharge current with the increasing airflow humidity were observed. Humidity was found to be the most pronounced factor promoting the single-pass disinfection efficiency. The Z value reached 0.32 l/J for relative humidity of 70%–80%. Additionally, ozone and ions were found to play a minor role in plasma-mediated bacterial inactivation. The antibacterial effectiveness of the disinfector was also validated by 2-h circulating disinfection experiments. Efficiency was maintained above the disinfection level (>99.9%) after a 5000-h continuous running. Meanwhile, the ozone emission was below the standard limit requirements. The proposed air disinfector is promising for household use with the advantages of small size, bacterial inactivation capability, low ozone emission, and high perceptibility.


  • Open Access

    A large-scale filament-free planar plume generated by an argon plasma jet in a gas-confined barrier discharge geometry

    by Mo Chen, Xiupin Dong, Kaiyue Wu, Junxia Ran, Pengying Jia, Jiacun Wu, Xuechen Li

    Large-scale plumes in a plasma jet are desirable for fast processing of materials with large surface, which are normally composed of discharge filaments. A filamentary plume may cause nonuniform treatment or even damage to vulnerable samples. In this Letter, an argon plasma jet in a gas-confined barrier discharge geometry is proposed to generate a large-scale filament-free plume. Results indicate that the filament-free plume can only be sustained in a relatively low voltage amplitude (Vp), which transits to the filamentary plume with increasing Vp. There is only one negative discharge per voltage cycle for the filament-free plume, while both positive and negative discharges for the filamentary plume. Fast photography reveals that the negative discharge is diffuse, originating from the propagation of a negative streamer. On the contrary, the positive discharges are filamentary. Optical emission spectroscopy indicates that the filament-free plume has lower electron density, electron excitation temperature, and molecular vibrational temperature compared to the filamentary plume, while gas temperature keeps at a low value with varying Vp.