Tao Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Tao Zhang has a total of 48 co-authors. Here are the top co-authors by number of shared publications:
- Jin-Quan Yu
The Scripps Research Institute
6 shared publications - Tao Sheng
Department of Chemistry, The Scripps Research Institute, La Jolla, USA
3 shared publications - Jie-Lun Yan
Department of Chemistry, The Scripps Research Institute, La Jolla, USA
2 shared publications - Yuxin Ouyang
Department of Chemistry, The Scripps Research Institute, 10550 N. Torrey Pines Rd., La Jolla, California 92037, United States
2 shared publications Zi-Yu Zhang
Department of Chemistry, The Scripps Research Institute, 10550 North Torrey Pines Road, La Jolla, California 92037, United States
2 shared publications- Zi-Yu Zhang
Department of Chemistry
2 shared publications
Latest Publications
- 29 July 2026
- Published by Springer Nature in Nature
- Vol. 656 (8126) , 92-97
Alternating CO2 and bicycloalkane copolymerization to circular polyesters
Transforming abundant but inert CO2 into useful polymers has been pursued since the 1960s (ref. 1) and has typically been achieved by copolymerization with a reactive comonomer, aided by a catalyst, which can address both thermodynamic constraints and high kinetic barriers associated with CO2 fixation and incorporation2,3,4,5. However, making polyesters remains a challenge as alternating copolymerization of CO2 with alkenes is thermodynamically infeasible6. Here we introduce a closed-loop CO2-based polyester platform for producing high-performance yet recyclable polyesters by direct alternating copolymerization of CO2 with bicycloalkanes, bicyclic butane (BCB) and pentane (BCP) monomers. This copolymerization is initiated by a simple organic catalyst and proceeds in a perfectly alternating fashion to high-molar-mass polyesters with maximum (50 mol%) CO2 incorporation and architecturally defined backbones, in which the in-chain ring structure enables tailorable thermal and mechanical properties. These polyesters exhibit desired orthogonal performance and end-of-life outcomes. Although the BCB-CO2 polyesters exhibit exceptional thermal and hydrolytic stability across the full pH range, they can be selectively depolymerized in bulk and base-catalysed conditions to regenerate pure BCB monomers in >90% isolated yield. The BCP-CO2 polyesters can also be selectively depolymerized but to bicyclolactones. Sequential depolymerization–repolymerization cycles establish circular lifecycles for BCB/BCP-CO2 high-performance polyesters.
- 29 July 2026
- Published by Springer Nature in Nature
- Vol. 656 (8126) , 92-97
Alternating CO2 and bicycloalkane copolymerization to circular polyesters
Transforming abundant but inert CO2 into useful polymers has been pursued since the 1960s (ref. 1) and has typically been achieved by copolymerization with a reactive comonomer, aided by a catalyst, which can address both thermodynamic constraints and high kinetic barriers associated with CO2 fixation and incorporation2,3,4,5. However, making polyesters remains a challenge as alternating copolymerization of CO2 with alkenes is thermodynamically infeasible6. Here we introduce a closed-loop CO2-based polyester platform for producing high-performance yet recyclable polyesters by direct alternating copolymerization of CO2 with bicycloalkanes, bicyclic butane (BCB) and pentane (BCP) monomers. This copolymerization is initiated by a simple organic catalyst and proceeds in a perfectly alternating fashion to high-molar-mass polyesters with maximum (50 mol%) CO2 incorporation and architecturally defined backbones, in which the in-chain ring structure enables tailorable thermal and mechanical properties. These polyesters exhibit desired orthogonal performance and end-of-life outcomes. Although the BCB-CO2 polyesters exhibit exceptional thermal and hydrolytic stability across the full pH range, they can be selectively depolymerized in bulk and base-catalysed conditions to regenerate pure BCB monomers in >90% isolated yield. The BCP-CO2 polyesters can also be selectively depolymerized but to bicyclolactones. Sequential depolymerization–repolymerization cycles establish circular lifecycles for BCB/BCP-CO2 high-performance polyesters.
- 29 May 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (22) , 22913-22920
Ligand-Enabled Ag-Free Cross-Coupling of Methylene C(sp 3 )–H Bonds in Aliphatic Acids with C(sp 2 ) Bromides
Despite decades of progress, the use of methylene C(sp3)–H bonds from readily available native substrates as secondary alkyl coupling partners in C(sp3)–C(sp2) bond-forming reactions has remained largely confined to arylation. The requirement for stoichiometric silver salts to scavenge the iodides from the aryl or vinyl iodide coupling partners is another persistent hurdle in achieving practicality and scalability. Here we report C(sp3)–C(sp2) cross-coupling of remote methylene C(sp3)–H bonds as secondary alkyl surrogates with C(sp2) bromides. The development of a bifunctional electron-rich pyridine-pyridone ligand that can promote both the C(sp3)–H activation and the oxidative addition of alkenyl and (hetero)aryl bromides is crucial to achieve this Ag free cross-coupling, addressing a long-standing challenge in C(sp3)–H coupling reactions. Moreover, the successful modification of structurally complex natural products and pharmaceutical derivatives highlights its broad functional group tolerance and utility in late-stage C(sp3)–C(sp2) bond construction.
- 29 May 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (22) , 22913-22920
Ligand-Enabled Ag-Free Cross-Coupling of Methylene C(sp 3 )–H Bonds in Aliphatic Acids with C(sp 2 ) Bromides
Despite decades of progress, the use of methylene C(sp3)–H bonds from readily available native substrates as secondary alkyl coupling partners in C(sp3)–C(sp2) bond-forming reactions has remained largely confined to arylation. The requirement for stoichiometric silver salts to scavenge the iodides from the aryl or vinyl iodide coupling partners is another persistent hurdle in achieving practicality and scalability. Here we report C(sp3)–C(sp2) cross-coupling of remote methylene C(sp3)–H bonds as secondary alkyl surrogates with C(sp2) bromides. The development of a bifunctional electron-rich pyridine-pyridone ligand that can promote both the C(sp3)–H activation and the oxidative addition of alkenyl and (hetero)aryl bromides is crucial to achieve this Ag free cross-coupling, addressing a long-standing challenge in C(sp3)–H coupling reactions. Moreover, the successful modification of structurally complex natural products and pharmaceutical derivatives highlights its broad functional group tolerance and utility in late-stage C(sp3)–C(sp2) bond construction.
- Open Access
- 20 February 2026
- Published by Springer Nature in Nature Chemistry
- Vol. 18 (5) , 893-898
Formal Diels–Alder reaction of saturated carboxylic acids via C–H activation
Constructing ubiquitous bridged bicyclic scaffolds from simple aliphatic feedstocks via multiple C(sp3)–H functionalizations is a significant challenge in organic synthesis, demanding powerful catalysts capable of precise selectivity control. Here we demonstrate a catalytic system that enables abundant cyclic carboxylic acids to couple with dienophiles in a formal Diels–Alder manner with exclusive regioselectivity, forging bridged bicyclic scaffolds. Mechanistic studies revealed that the pyridine–pyridone ligand plays a crucial role in the β,γ-dehydrogenation of cyclic carboxylic acids, concerted decarboxylation process and subsequent regioselective β-hydride elimination through precise control of the electronic distribution of palladium and cyclic carboxylic acids and the steric interactions between them. Dienes generated in situ are rapidly intercepted by a variety of dienophiles, furnishing the bridged bicyclic motifs with exclusive endoselectivity. Notably, β-, γ- and δ-methylene C(sp3)–H bonds are functionalized with exclusive regioselectivity controlled by one catalyst.
- 20 February 2026
- Published by Springer Nature in Nature Chemistry
- Vol. 18 (5) , 893-898
Open AccessFormal Diels–Alder reaction of saturated carboxylic acids via C–H activation
Constructing ubiquitous bridged bicyclic scaffolds from simple aliphatic feedstocks via multiple C(sp3)–H functionalizations is a significant challenge in organic synthesis, demanding powerful catalysts capable of precise selectivity control. Here we demonstrate a catalytic system that enables abundant cyclic carboxylic acids to couple with dienophiles in a formal Diels–Alder manner with exclusive regioselectivity, forging bridged bicyclic scaffolds. Mechanistic studies revealed that the pyridine–pyridone ligand plays a crucial role in the β,γ-dehydrogenation of cyclic carboxylic acids, concerted decarboxylation process and subsequent regioselective β-hydride elimination through precise control of the electronic distribution of palladium and cyclic carboxylic acids and the steric interactions between them. Dienes generated in situ are rapidly intercepted by a variety of dienophiles, furnishing the bridged bicyclic motifs with exclusive endoselectivity. Notably, β-, γ- and δ-methylene C(sp3)–H bonds are functionalized with exclusive regioselectivity controlled by one catalyst.
- 21 December 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (1) , 39-42
Enantioselective C–H Activation for the Construction of Chiral Tertiary Fluorides via Migrative Carbofluorination
Construction of α-chiral centers via enantioselective C(sp3)-H activation of the isobutyric acid scaffold has emerged as a new chiral technology. However, this approach has not been compatible with the presence of α-fluorine, which prevented the access to fluorine-bearing α-chiral centers which are highly valuable in drug discovery. Here, we report a palladium-catalyzed asymmetric β-C(sp3)-H activation of the gem-dimethyl motif, followed by a dyotropic rearrangement that installs fluoro and aryl groups at the α- and β-positions, respectively. Using a bifunctional chiral monoprotected amino sulfonamide (MPASA) ligand, this method affords chiral tertiary fluorides with high reactivity and enantioselectivity, enabling access to desirable motifs in drug discovery.
- 21 December 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (1) , 39-42
Enantioselective C–H Activation for the Construction of Chiral Tertiary Fluorides via Migrative Carbofluorination
Construction of α-chiral centers via enantioselective C(sp3)-H activation of the isobutyric acid scaffold has emerged as a new chiral technology. However, this approach has not been compatible with the presence of α-fluorine, which prevented the access to fluorine-bearing α-chiral centers which are highly valuable in drug discovery. Here, we report a palladium-catalyzed asymmetric β-C(sp3)-H activation of the gem-dimethyl motif, followed by a dyotropic rearrangement that installs fluoro and aryl groups at the α- and β-positions, respectively. Using a bifunctional chiral monoprotected amino sulfonamide (MPASA) ligand, this method affords chiral tertiary fluorides with high reactivity and enantioselectivity, enabling access to desirable motifs in drug discovery.
- Open Access
- 18 September 2024
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 15 (41) , 17092-17096
Synthesis of chiral α-amino acids via Pd(ii)-catalyzed enantioselective C–H arylation of α-aminoisobutyric acid
Non-natural chiral α,α-disubstituted α-amino acids (α,α-AAs) constitute an attractive α-aminoisobutyric acid (Aib) replacement for improving bioavailability of linear peptides as therapeutics due to the helical structures of the formed peptides.
- 18 September 2024
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 15 (41) , 17092-17096
Open AccessSynthesis of chiral α-amino acids via Pd(ii)-catalyzed enantioselective C–H arylation of α-aminoisobutyric acid
Non-natural chiral α,α-disubstituted α-amino acids (α,α-AAs) constitute an attractive α-aminoisobutyric acid (Aib) replacement for improving bioavailability of linear peptides as therapeutics due to the helical structures of the formed peptides.
- 15 August 2024
- Published by Springer Nature in Nature Synthesis
- Vol. 3 (12) , 1550-1559
Synthesis of chiral carbocycles via enantioselective β,γ-dehydrogenation
Dehydrogenation of an alkyl group via C–H activation forms a vinyl unit, which can act as a versatile stepping stone for diverse late-stage structural modifications at two adjacent sp3 carbon centres. However, enantioselective dehydrogenation via C–H metalation remains a challenge. Here we describe the realization of palladium-catalysed enantioselective β,γ-dehydrogenation of cycloalkyl amides enabled by chiral oxazoline–pyridone ligands to afford a wide range of highly elaborated carbocycles with exceptional enantioselectivity (>99% e.e.). Notably, the resulting chiral β,γ-unsaturated carbocycles are difficult to access via an inverse electron demand Diels–Alder reaction. Through ligand control, a tandem dehydrogenation and C–H olefination sequence also led to the formation of chiral β-alkylidene-γ-lactams. Remarkably, this catalyst is also compatible with biologically important natural products, including diterpenes and pentacyclic triterpenes, where each enantiomer of our chiral ligand enables site-selective modification at four distinct sites within the E ring.
- 15 August 2024
- Published by Springer Nature in Nature Synthesis
- Vol. 3 (12) , 1550-1559
Synthesis of chiral carbocycles via enantioselective β,γ-dehydrogenation
Dehydrogenation of an alkyl group via C–H activation forms a vinyl unit, which can act as a versatile stepping stone for diverse late-stage structural modifications at two adjacent sp3 carbon centres. However, enantioselective dehydrogenation via C–H metalation remains a challenge. Here we describe the realization of palladium-catalysed enantioselective β,γ-dehydrogenation of cycloalkyl amides enabled by chiral oxazoline–pyridone ligands to afford a wide range of highly elaborated carbocycles with exceptional enantioselectivity (>99% e.e.). Notably, the resulting chiral β,γ-unsaturated carbocycles are difficult to access via an inverse electron demand Diels–Alder reaction. Through ligand control, a tandem dehydrogenation and C–H olefination sequence also led to the formation of chiral β-alkylidene-γ-lactams. Remarkably, this catalyst is also compatible with biologically important natural products, including diterpenes and pentacyclic triterpenes, where each enantiomer of our chiral ligand enables site-selective modification at four distinct sites within the E ring.
- 17 May 2024
- Published by American Association for the Advancement of Science (AAAS) in Science
- Vol. 384 (6697) , 793-798
Enantioselective remote methylene C−H (hetero)arylation of cycloalkane carboxylic acids
Stereoselective construction of γ- and δ-stereocenters in carbonyl compounds is a pivotal objective in asymmetric synthesis. Here, we report chiral bifunctional oxazoline-pyridone ligands that enable enantioselective palladium-catalyzed remote γ-C−H (hetero)arylations of free cycloalkane carboxylic acids, which are essential carbocyclic building blocks in organic synthesis. The reaction establishes γ-tertiary and α-quaternary stereocenters simultaneously in up to >99% enantiomeric excess, providing access to a wide range of cyclic chiral synthons and bioactive molecules. The sequential enantioselective editing of two methylene C–H bonds can be achieved by using chiral ligands with opposite configuration to construct carbocycles containing three chiral centers. Enantioselective remote δ-C−H (hetero)arylation is also realized to establish δ-stereocenters that are particularly challenging to access using classical methodologies.
- 17 May 2024
- Published by American Association for the Advancement of Science (AAAS) in Science
- Vol. 384 (6697) , 793-798
Enantioselective remote methylene C−H (hetero)arylation of cycloalkane carboxylic acids
Stereoselective construction of γ- and δ-stereocenters in carbonyl compounds is a pivotal objective in asymmetric synthesis. Here, we report chiral bifunctional oxazoline-pyridone ligands that enable enantioselective palladium-catalyzed remote γ-C−H (hetero)arylations of free cycloalkane carboxylic acids, which are essential carbocyclic building blocks in organic synthesis. The reaction establishes γ-tertiary and α-quaternary stereocenters simultaneously in up to >99% enantiomeric excess, providing access to a wide range of cyclic chiral synthons and bioactive molecules. The sequential enantioselective editing of two methylene C–H bonds can be achieved by using chiral ligands with opposite configuration to construct carbocycles containing three chiral centers. Enantioselective remote δ-C−H (hetero)arylation is also realized to establish δ-stereocenters that are particularly challenging to access using classical methodologies.
- Open Access
BUDA-SAGE with self-supervised denoising enables fast, distortion-free, high-resolution T2, T2*, para- and dia-magnetic susceptibility mapping
To rapidly obtain high resolution T2, T2* and quantitative susceptibility mapping (QSM) source separation maps with whole-brain coverage and high geometric fidelity. We propose Blip Up-Down Acquisition for Spin And Gradient Echo imaging (BUDA-SAGE), an efficient echo-planar imaging (EPI) sequence for quantitative mapping. The acquisition includes multiple T2*-, T2'- and T2-weighted contrasts. We alternate the phase-encoding polarities across the interleaved shots in this multi-shot navigator-free acquisition. A field map estimated from interim reconstructions was incorporated into the joint multi-shot EPI reconstruction with a structured low rank constraint to eliminate geometric distortion. A self-supervised MR-Self2Self (MR-S2S) neural network (NN) was utilized to perform denoising after BUDA reconstruction to boost SNR. Employing Slider encoding allowed us to reach 1 mm isotropic resolution by performing super-resolution reconstruction on BUDA-SAGE volumes acquired with 2 mm slice thickness. Quantitative T2 and T2* maps were obtained using Bloch dictionary matching on the reconstructed echoes. QSM was estimated using nonlinear dipole inversion (NDI) on the gradient echoes. Starting from the estimated R2 and R2* maps, R2' information was derived and used in source separation QSM reconstruction, which provided additional para- and dia-magnetic susceptibility maps. In vivo results demonstrate the ability of BUDA-SAGE to provide whole-brain, distortion-free, high-resolution multi-contrast images and quantitative T2 and T2* maps, as well as yielding para- and dia-magnetic susceptibility maps. Derived quantitative maps showed comparable values to conventional mapping methods in phantom and in vivo measurements. BUDA-SAGE acquisition with self-supervised denoising and Slider encoding enabled rapid, distortion-free, whole-brain T2, T2* mapping at 1 mm3 isotropic resolution in 90 seconds.
Open AccessBUDA-SAGE with self-supervised denoising enables fast, distortion-free, high-resolution T2, T2*, para- and dia-magnetic susceptibility mapping
To rapidly obtain high resolution T2, T2* and quantitative susceptibility mapping (QSM) source separation maps with whole-brain coverage and high geometric fidelity. We propose Blip Up-Down Acquisition for Spin And Gradient Echo imaging (BUDA-SAGE), an efficient echo-planar imaging (EPI) sequence for quantitative mapping. The acquisition includes multiple T2*-, T2'- and T2-weighted contrasts. We alternate the phase-encoding polarities across the interleaved shots in this multi-shot navigator-free acquisition. A field map estimated from interim reconstructions was incorporated into the joint multi-shot EPI reconstruction with a structured low rank constraint to eliminate geometric distortion. A self-supervised MR-Self2Self (MR-S2S) neural network (NN) was utilized to perform denoising after BUDA reconstruction to boost SNR. Employing Slider encoding allowed us to reach 1 mm isotropic resolution by performing super-resolution reconstruction on BUDA-SAGE volumes acquired with 2 mm slice thickness. Quantitative T2 and T2* maps were obtained using Bloch dictionary matching on the reconstructed echoes. QSM was estimated using nonlinear dipole inversion (NDI) on the gradient echoes. Starting from the estimated R2 and R2* maps, R2' information was derived and used in source separation QSM reconstruction, which provided additional para- and dia-magnetic susceptibility maps. In vivo results demonstrate the ability of BUDA-SAGE to provide whole-brain, distortion-free, high-resolution multi-contrast images and quantitative T2 and T2* maps, as well as yielding para- and dia-magnetic susceptibility maps. Derived quantitative maps showed comparable values to conventional mapping methods in phantom and in vivo measurements. BUDA-SAGE acquisition with self-supervised denoising and Slider encoding enabled rapid, distortion-free, whole-brain T2, T2* mapping at 1 mm3 isotropic resolution in 90 seconds.