Andrey Pleskachevsky
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Andrey Pleskachevsky has a total of 43 co-authors. Here are the top co-authors by number of shared publications:
Sven Jacobsen
German Aerospace Center DLR, Earth Observation Center, Maritime Safety and Security Lab Bremen, Bremen, Germany
5 shared publications- Björn Tings
German Aerospace Center DLR, Earth Observation Center, Maritime Safety and Security Lab Bremen, Bremen, Germany
4 shared publications Detmar Krause
Maritime Safety and Security Laboratory at Neustrelitz, German Aerospace Center DLR, Earth Observation Center, Neustrelitz, Germany
4 shared publicationsEgbert Schwarz
Maritime Safety and Security Laboratory at Neustrelitz, German Aerospace Center DLR, Earth Observation Center, Neustrelitz, Germany
4 shared publications- Sven Jacobsen
German Aerospace Center (DLR), Maritime Safety and Security Lab, Remote Sensing Technology Institute, D-28359 Bremen, Germany
4 shared publications Björn Tings
3 shared publications
Latest Publications
- Open Access
- 10 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
- Vol. 19 (19391404) , 10183-10200
First Processing of the Complete Sentinel-1 SAR Archive: 10 Years of Global Sea State
In this study, the sea state was estimated and analyzed by processing the ten-years worldwide Sentinel-1 Synthetic Aperture Radar (SAR) archive 2014−2024. The approx. 15 Petabyte of data contain approx. 4.2 million SAR scenes, where approx. 3 million are Interferometric Wide Swath (IW, acquisitions mainly in shelfs and seas), approx. 1 million Extra Wide Swath (EW, mainly poles but also Atlantic, Madagascar) and approx. 0.2 million Wave Mode (WV, open oceans) products. Eight integrated sea state parameters are derived: total significant wave height (SWH), first and second moment wave periods, mean wave period, dominant and secondary swell wave heights and windsea wave height and periods. The sea state parameters are provided on a 5 km grid for IW, a 17.5 km grid for EW and by average values for WV's along-flight imagettes. The validations were carried out with reanalysis model results and buoys. The empirical algorithm SAR-SeaStaR uses machine learning and was improved by extending the training data with extreme storms and buoy collocations. Furthermore, worldwide areas with increased ground truth uncertainties, identified by strong differences between data sources, were identified and excluded for trainings. This approach results in an improved worldwide SWH root mean square error RMSE of 0.38 m for S1 IW and 0.45 m for S1 EW by model comparison. The results of all three S1 modes cover the entire globe including open ocean, shelfs and internal seas and are being made available for the public through ESA in the framework of the Climate Change Initiative - Sea State ECV project. They can be used for analysis and statistics of the worldwide sea state. A first exemplary analysis of the global S1 data shows a slight increase in the percentage of low sea state with a corresponding decrease in high sea by approx. 2% of the total in shelf areas (dominant data in North Atlantic) and seas (Mediterranean, North, Baltic, Black Seas etc.), but an increase in very high storms in the open ocean by approx. 0.3% in the last ten years. The storms at the Cape of Good Hope in South Africa weakened, while storms off Cape Horn in South America intensified.
- 10 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
- Vol. 19 (19391404) , 10183-10200
Open AccessFirst Processing of the Complete Sentinel-1 SAR Archive: 10 Years of Global Sea State
In this study, the sea state was estimated and analyzed by processing the ten-years worldwide Sentinel-1 Synthetic Aperture Radar (SAR) archive 2014−2024. The approx. 15 Petabyte of data contain approx. 4.2 million SAR scenes, where approx. 3 million are Interferometric Wide Swath (IW, acquisitions mainly in shelfs and seas), approx. 1 million Extra Wide Swath (EW, mainly poles but also Atlantic, Madagascar) and approx. 0.2 million Wave Mode (WV, open oceans) products. Eight integrated sea state parameters are derived: total significant wave height (SWH), first and second moment wave periods, mean wave period, dominant and secondary swell wave heights and windsea wave height and periods. The sea state parameters are provided on a 5 km grid for IW, a 17.5 km grid for EW and by average values for WV's along-flight imagettes. The validations were carried out with reanalysis model results and buoys. The empirical algorithm SAR-SeaStaR uses machine learning and was improved by extending the training data with extreme storms and buoy collocations. Furthermore, worldwide areas with increased ground truth uncertainties, identified by strong differences between data sources, were identified and excluded for trainings. This approach results in an improved worldwide SWH root mean square error RMSE of 0.38 m for S1 IW and 0.45 m for S1 EW by model comparison. The results of all three S1 modes cover the entire globe including open ocean, shelfs and internal seas and are being made available for the public through ESA in the framework of the Climate Change Initiative - Sea State ECV project. They can be used for analysis and statistics of the worldwide sea state. A first exemplary analysis of the global S1 data shows a slight increase in the percentage of low sea state with a corresponding decrease in high sea by approx. 2% of the total in shelf areas (dominant data in North Atlantic) and seas (Mediterranean, North, Baltic, Black Seas etc.), but an increase in very high storms in the open ocean by approx. 0.3% in the last ten years. The storms at the Cape of Good Hope in South Africa weakened, while storms off Cape Horn in South America intensified.
- Open Access
- 3 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 62 (01962892) , 1-18
A System for Near-Real-Time Monitoring of the Sea State Using SAR Satellites
This paper introduces an improved system for sea state observations for Near Real-Time (NRT) services using satellite-borne synthetic aperture radar (SAR). The empirical algorithm SAR-SeaStaR (SAR Sea State Retrieval) applies a combination of a classical approach using linear regression (LR) with machine learning (ML). SAR-SeaStaR includes a series of filtering and control procedures and a series of LR and ML model functions for different satellites/modes and following integrated sea state parameters: total significant wave height Hs , wave heights of dominant and secondary swells and windsea, mean, first and second moment wave periods Tm2 , and windsea period. SAR scenes are processed in raster format, the output are fields for each parameter showing their spatial distribution. In the scope of this study, the ML models were developed for Hs and Tm2 and implemented into SAR-SeaStaR for processing Level-1 products of X-band TerraSAR-X (TS-X) StripMap (SM) and C-band Sentinel-1 (S1) Interferometric Wide Swath Mode (IW), S1 Extra Wide (EW). The validations are based on processing large worldwide archives with several years of acquisitions. Hindcast data from numerical spectral models and in-situ buoys measurements are used as ground truth. The root mean squared errors of the complete system reached from these archived data for Hs are RMSE=0.35 m for TS-X SM (pixel spacing ca. 1.2-4.5 m pixel), RMSE=0.25 m for S1 Wave Mode (WV, ca. 3.5 m pixels), RMSE=0.42 m for the coarser S1 IW (10 m pixels) and RMSE=0.52 m for S1 EW (40 m pixels). SAR-SeaStaR was implemented in the Sea State Processor software using modular architecture and applied at the DLR Ground Station in Neustrelitz as part of an NRT demonstrator service. S1 IW data acquired over North and Baltic Sea are processed automatically, surface wind and sea state parameters are provided daily.
- 3 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 62 (01962892) , 1-18
Open AccessA System for Near-Real-Time Monitoring of the Sea State Using SAR Satellites
This paper introduces an improved system for sea state observations for Near Real-Time (NRT) services using satellite-borne synthetic aperture radar (SAR). The empirical algorithm SAR-SeaStaR (SAR Sea State Retrieval) applies a combination of a classical approach using linear regression (LR) with machine learning (ML). SAR-SeaStaR includes a series of filtering and control procedures and a series of LR and ML model functions for different satellites/modes and following integrated sea state parameters: total significant wave height Hs , wave heights of dominant and secondary swells and windsea, mean, first and second moment wave periods Tm2 , and windsea period. SAR scenes are processed in raster format, the output are fields for each parameter showing their spatial distribution. In the scope of this study, the ML models were developed for Hs and Tm2 and implemented into SAR-SeaStaR for processing Level-1 products of X-band TerraSAR-X (TS-X) StripMap (SM) and C-band Sentinel-1 (S1) Interferometric Wide Swath Mode (IW), S1 Extra Wide (EW). The validations are based on processing large worldwide archives with several years of acquisitions. Hindcast data from numerical spectral models and in-situ buoys measurements are used as ground truth. The root mean squared errors of the complete system reached from these archived data for Hs are RMSE=0.35 m for TS-X SM (pixel spacing ca. 1.2-4.5 m pixel), RMSE=0.25 m for S1 Wave Mode (WV, ca. 3.5 m pixels), RMSE=0.42 m for the coarser S1 IW (10 m pixels) and RMSE=0.52 m for S1 EW (40 m pixels). SAR-SeaStaR was implemented in the Sea State Processor software using modular architecture and applied at the DLR Ground Station in Neustrelitz as part of an NRT demonstrator service. S1 IW data acquired over North and Baltic Sea are processed automatically, surface wind and sea state parameters are provided daily.
- Open Access
- 25 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
- Vol. 17 (19391404) , 9415-9428
Evaluation of SAR-Based Sea State Parameters and Roughness Length Derivation Over the Coastal Seas of the USA
This article presents comprehensive validation of specific sea state parameters (SSPs) and synthetic aperture radar (SAR)-derived wind speeds ( ${{u}_{\text{SAR}}}$ ). The article introduces a novel approach to retrieving roughness length ( ${{z}_0}$ ) based on wave steepness, following the retrieval of the short wavelengths necessary to estimate ${{z}_0}$ . The SAR onboard the Sentinel-1 (S1) satellite that was used specifically in the interferometric wide swath mode (IW) data. The data were processed using the extended version of CWAVE (CWAVE_EX) algorithm for SSPs and CMOD5 for ${{u}_{\text{SAR}}}$ . CWAVE_EX was developed especially for coastal waters; the processing chain includes steps for SAR image denoising and eliminating image artifacts. SAR S-1 data inherently exhibit a substantial azimuthal cutoff length due to the data's high satellite altitude and SAR IW resolution. That complicates the retrieving of short wavelengths prevalent in coastal zones and needed to retrieve ${{z}_0}$ . The article focuses on the coastal seas of the USA, benefiting from the presence of an extensive network of ocean buoys for validation purposes. The complete SAR S1 A/B archive from 2014 to 2022 was first processed to retrieve SSPs and ${{u}_{\text{SAR}}}$ . The validation for significant wave height ( ${{H}_s}$ ), second moment wave period ( ${{T}_{m2}}$ ), and ${{u}_{\text{SAR}}}$ was performed using in-situ measurements with about 6000 collocations. ${{H}_s}$ and ${{T}_{m2}}$ were compared against the corresponding parameters from hindcast spectral numerical model data with about 380 000 collocations. The comparisons between the retrieved ${{H}_s}$ and ${{T}_{m2}}$ against the in-situ observations and hindcast wave model data yielded a root mean square error (RMSE) of 0.46–0.50 m and 0.9–1.1 s. The RMSE of ${{u}_{\text{SAR}}}$ against in-situ observation was about 2 m/s with a bias of 0.78 m/s. The estimated ${{z}_0}$ values from satellite-driven wave parameters were highly correlated with the ${{z}_0}$ estimated from the in-situ observations, with an RMSE of 0.04 × 10 −3 m and a bias of −0.01 × 10 −3 m. The article highlights the possibility of using SAR remote sensing data for global mapping of ${{z}_0}$ , including coastal effects of local variability in sea state and wind field gustiness.
- 25 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
- Vol. 17 (19391404) , 9415-9428
Open AccessEvaluation of SAR-Based Sea State Parameters and Roughness Length Derivation Over the Coastal Seas of the USA
This article presents comprehensive validation of specific sea state parameters (SSPs) and synthetic aperture radar (SAR)-derived wind speeds ( ${{u}_{\text{SAR}}}$ ). The article introduces a novel approach to retrieving roughness length ( ${{z}_0}$ ) based on wave steepness, following the retrieval of the short wavelengths necessary to estimate ${{z}_0}$ . The SAR onboard the Sentinel-1 (S1) satellite that was used specifically in the interferometric wide swath mode (IW) data. The data were processed using the extended version of CWAVE (CWAVE_EX) algorithm for SSPs and CMOD5 for ${{u}_{\text{SAR}}}$ . CWAVE_EX was developed especially for coastal waters; the processing chain includes steps for SAR image denoising and eliminating image artifacts. SAR S-1 data inherently exhibit a substantial azimuthal cutoff length due to the data's high satellite altitude and SAR IW resolution. That complicates the retrieving of short wavelengths prevalent in coastal zones and needed to retrieve ${{z}_0}$ . The article focuses on the coastal seas of the USA, benefiting from the presence of an extensive network of ocean buoys for validation purposes. The complete SAR S1 A/B archive from 2014 to 2022 was first processed to retrieve SSPs and ${{u}_{\text{SAR}}}$ . The validation for significant wave height ( ${{H}_s}$ ), second moment wave period ( ${{T}_{m2}}$ ), and ${{u}_{\text{SAR}}}$ was performed using in-situ measurements with about 6000 collocations. ${{H}_s}$ and ${{T}_{m2}}$ were compared against the corresponding parameters from hindcast spectral numerical model data with about 380 000 collocations. The comparisons between the retrieved ${{H}_s}$ and ${{T}_{m2}}$ against the in-situ observations and hindcast wave model data yielded a root mean square error (RMSE) of 0.46–0.50 m and 0.9–1.1 s. The RMSE of ${{u}_{\text{SAR}}}$ against in-situ observation was about 2 m/s with a bias of 0.78 m/s. The estimated ${{z}_0}$ values from satellite-driven wave parameters were highly correlated with the ${{z}_0}$ estimated from the in-situ observations, with an RMSE of 0.04 × 10 −3 m and a bias of −0.01 × 10 −3 m. The article highlights the possibility of using SAR remote sensing data for global mapping of ${{z}_0}$ , including coastal effects of local variability in sea state and wind field gustiness.
- Open Access
- 28 September 2023
- Published by MDPI AG in Remote Sensing
- Vol. 15 (19) , 4753
Investigating High-Resolution Spatial Wave Patterns on the Canadian Beaufort Shelf Using Synthetic Aperture Radar Imagery at Herschel Island, Qikiqtaruk, Yukon, Canada
The Arctic is experiencing the greatest increase in air temperature on Earth. This significant climatic change is leading to a significant positive trend of increasing wave heights and greater coastal erosion. This in turn effects local economies and ecosystems. Increasing wave energy is one of the main drivers of this alarming trend. However, the data on spatial and temporal patterns of wave heights in the Arctic are either coarse, interpolated or limited to point measurements. The aim of this study is to overcome this shortcoming by using remote sensing data. In this study, the Synthetic Aperture Radar (SAR) satellite TerraSAR-X (TS-X) and TanDEM-X (TD-X) imagery are used to obtain sea state information with a high spatial resolution in Arctic nearshore waters in the Canadian Beaufort Sea. From the entire archive of the TS-X/TD-X StripMap mode with coverage around 30 km × 50 km acquired between 2009 and 2020 around Herschel Island, Qikiqtaruk (HIQ), all the ice-free scenes were processed. The resulting dataset of 175 collocated scenes was used to map the significant wave height () and to link spatial and temporal patterns to local coastal processes. Sea state parameters are estimated in raster format with a 600 m step using the empirical algorithm CWAVE_EX. The statistics of the were aggregated according to spatial variability, seasonality and wind conditions. The results show that the spatial wave climate is clearly related to the dominant wind regime and seasonality. For instance, the aggregation of all the scenes recorded in July between 2009 and 2020 results in an average of 0.82 m , while in October the average is almost 0.40 m higher. The analysis by wind direction shows that fetch length and wind speed are likely the most important variables influencing the spatial variability. A larger fetch under NW conditions results in a mean wave height of 0.92 m, while waves generated under ESE conditions are lower at 0.81 m on average.- 28 September 2023
- Published by MDPI AG in Remote Sensing
- Vol. 15 (19) , 4753
Open AccessInvestigating High-Resolution Spatial Wave Patterns on the Canadian Beaufort Shelf Using Synthetic Aperture Radar Imagery at Herschel Island, Qikiqtaruk, Yukon, Canada
The Arctic is experiencing the greatest increase in air temperature on Earth. This significant climatic change is leading to a significant positive trend of increasing wave heights and greater coastal erosion. This in turn effects local economies and ecosystems. Increasing wave energy is one of the main drivers of this alarming trend. However, the data on spatial and temporal patterns of wave heights in the Arctic are either coarse, interpolated or limited to point measurements. The aim of this study is to overcome this shortcoming by using remote sensing data. In this study, the Synthetic Aperture Radar (SAR) satellite TerraSAR-X (TS-X) and TanDEM-X (TD-X) imagery are used to obtain sea state information with a high spatial resolution in Arctic nearshore waters in the Canadian Beaufort Sea. From the entire archive of the TS-X/TD-X StripMap mode with coverage around 30 km × 50 km acquired between 2009 and 2020 around Herschel Island, Qikiqtaruk (HIQ), all the ice-free scenes were processed. The resulting dataset of 175 collocated scenes was used to map the significant wave height () and to link spatial and temporal patterns to local coastal processes. Sea state parameters are estimated in raster format with a 600 m step using the empirical algorithm CWAVE_EX. The statistics of the were aggregated according to spatial variability, seasonality and wind conditions. The results show that the spatial wave climate is clearly related to the dominant wind regime and seasonality. For instance, the aggregation of all the scenes recorded in July between 2009 and 2020 results in an average of 0.82 m , while in October the average is almost 0.40 m higher. The analysis by wind direction shows that fetch length and wind speed are likely the most important variables influencing the spatial variability. A larger fetch under NW conditions results in a mean wave height of 0.92 m, while waves generated under ESE conditions are lower at 0.81 m on average. - Open Access
- 6 April 2022
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 10 (4) , 507
Characterizing Rogue Waves at the Entrance of Tampa Bay (Florida, USA)
Rogue waves are a recognized but not fully comprehended hazard of major concern to the maritime industry. There is not one agreed-upon unified model that explains the formation of such waves and little is known about their frequency of occurrence. This study used in situ data from a wave buoy located at the entrance of Tampa Bay, Florida, to assess conditions that could lead to the development of these potentially destructive waves. Tampa Bay is a major commercial and transportation hub on the east coast of the United States. Wave buoy data from 2015 to 2019 were analyzed in this study. While more than 7000 individual waves that significantly exceeded median values were recorded, only 32 exceeded 4 m, thereby imposing risks to local navigation. The largest rogue wave that was recorded was 8.46 m high. Parameters in the time and frequency domains were calculated, local wind and surface current data were correlated, satellite synthetic-aperture radar (SAR) and vessel traffic data were analyzed, and the local bathymetry was considered. Based on our results, the narrow directional wave spreading that was found on the selected rogue waves was recognized as an important indicator of extreme waves. The parameters: surface elevation kurtosis, Benjamin–Feir Index (BFI), wave steepness, broadness, and narrowness factors, wind speed and direction, can be considered together, as a part of a local extreme-wave warning package. The selected individual rogue waves could not be identified using SAR imagery. Regional disturbances from ship wakes were analyzed but yielded no connections to the local formation of rogue waves.
- 6 April 2022
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 10 (4) , 507
Open AccessCharacterizing Rogue Waves at the Entrance of Tampa Bay (Florida, USA)
Rogue waves are a recognized but not fully comprehended hazard of major concern to the maritime industry. There is not one agreed-upon unified model that explains the formation of such waves and little is known about their frequency of occurrence. This study used in situ data from a wave buoy located at the entrance of Tampa Bay, Florida, to assess conditions that could lead to the development of these potentially destructive waves. Tampa Bay is a major commercial and transportation hub on the east coast of the United States. Wave buoy data from 2015 to 2019 were analyzed in this study. While more than 7000 individual waves that significantly exceeded median values were recorded, only 32 exceeded 4 m, thereby imposing risks to local navigation. The largest rogue wave that was recorded was 8.46 m high. Parameters in the time and frequency domains were calculated, local wind and surface current data were correlated, satellite synthetic-aperture radar (SAR) and vessel traffic data were analyzed, and the local bathymetry was considered. Based on our results, the narrow directional wave spreading that was found on the selected rogue waves was recognized as an important indicator of extreme waves. The parameters: surface elevation kurtosis, Benjamin–Feir Index (BFI), wave steepness, broadness, and narrowness factors, wind speed and direction, can be considered together, as a part of a local extreme-wave warning package. The selected individual rogue waves could not be identified using SAR imagery. Regional disturbances from ship wakes were analyzed but yielded no connections to the local formation of rogue waves.
- Open Access
- 17 December 2021
- Published by Copernicus GmbH
Multiparametric Sea State from Spaceborne Synthetic Aperture Radar for Near Real Time Services
Spaceborne synthetic aperture radar (SAR) is a powerful tool for monitoring marine environmental parameters of the seas. The ability to work independently of sun illumination, cloud coverage and atmospheric conditions, as well as the capability of delivering spatial information, makes SAR one of the most perceptive instruments. The newest methods for processing SAR data with increased precision allow sea state fields to be estimated with local variabilities. For large areas in oceans where no in-situ measurements and only forecast predictions are available, this information is indispensable for global shipping and over human activity. Due to newest developments, the derived meteo-marine parameters can be transferred to weather services and to a ship’s bridge several minutes after acquisition, where the ship route can be optimized. The study presents a method and application for estimating series of integrated sea state parameters from satellite-borne SAR, allow processing of data from different satellites and modes in near real time (NRT). The developed Sea State Processor (SSP) estimates total significant wave height Hs, dominant and secondary swell and windsea wave heights, first, and second moment wave periods, mean wave period and period of wind sea. The algorithm was applied for the Sentinel-1 (S1) C-band Interferometric Wide Swath Mode (IW), Extra Wide (EW) and Wave Mode (WM) Level-1 (L1) products and also extended to the X-band TerraSAR-X (TSX) StripMap (SM) mode. The scenes are processed in raster and result in continuous sea state fields with the exception of S1 WV. Each 20 km × 20 km WV imagette, acquired every 100 km along the orbit, presents averaged values for each sea state parameter. The SSP was tuned and validated using two independent global wave models WAVEWATCH-3 (NOAA) and CMEMS (Copernicus) and NDBC buoys. The accuracy of Hs reaches an RMSE of 0.25 m by comparison with models (S1 WV); comparisons to NDBC worldwide buoys result into an RMSE of 0.31 m. Due to implemented parallelization, a fine rater step for scene processing can be practical applied: for example, S1 IW scene with coverage of 200 km × 250 km can be processed using raster step of 1 km (corresponds to ~50.000 subscenes) during minutes. The DLR Ground Station “Neustrelitz” applies SSP as part of a near real-time demonstrator service that involves a fully automated daily provision of surface wind and sea state parameters estimates from S1 IW for the North and Baltic Sea. All results and the presented methods are novel and provide a wide field for applications and implementations in prediction systems.
- 17 December 2021
- Published by Copernicus GmbH
Open AccessMultiparametric Sea State from Spaceborne Synthetic Aperture Radar for Near Real Time Services
Spaceborne synthetic aperture radar (SAR) is a powerful tool for monitoring marine environmental parameters of the seas. The ability to work independently of sun illumination, cloud coverage and atmospheric conditions, as well as the capability of delivering spatial information, makes SAR one of the most perceptive instruments. The newest methods for processing SAR data with increased precision allow sea state fields to be estimated with local variabilities. For large areas in oceans where no in-situ measurements and only forecast predictions are available, this information is indispensable for global shipping and over human activity. Due to newest developments, the derived meteo-marine parameters can be transferred to weather services and to a ship’s bridge several minutes after acquisition, where the ship route can be optimized. The study presents a method and application for estimating series of integrated sea state parameters from satellite-borne SAR, allow processing of data from different satellites and modes in near real time (NRT). The developed Sea State Processor (SSP) estimates total significant wave height Hs, dominant and secondary swell and windsea wave heights, first, and second moment wave periods, mean wave period and period of wind sea. The algorithm was applied for the Sentinel-1 (S1) C-band Interferometric Wide Swath Mode (IW), Extra Wide (EW) and Wave Mode (WM) Level-1 (L1) products and also extended to the X-band TerraSAR-X (TSX) StripMap (SM) mode. The scenes are processed in raster and result in continuous sea state fields with the exception of S1 WV. Each 20 km × 20 km WV imagette, acquired every 100 km along the orbit, presents averaged values for each sea state parameter. The SSP was tuned and validated using two independent global wave models WAVEWATCH-3 (NOAA) and CMEMS (Copernicus) and NDBC buoys. The accuracy of Hs reaches an RMSE of 0.25 m by comparison with models (S1 WV); comparisons to NDBC worldwide buoys result into an RMSE of 0.31 m. Due to implemented parallelization, a fine rater step for scene processing can be practical applied: for example, S1 IW scene with coverage of 200 km × 250 km can be processed using raster step of 1 km (corresponds to ~50.000 subscenes) during minutes. The DLR Ground Station “Neustrelitz” applies SSP as part of a near real-time demonstrator service that involves a fully automated daily provision of surface wind and sea state parameters estimates from S1 IW for the North and Baltic Sea. All results and the presented methods are novel and provide a wide field for applications and implementations in prediction systems.
- Open Access
- 23 March 2020
- Published by Copernicus GmbH
New Algorithm and Processor for Obtaining Maritime Information from Sentinel-1 Radar Imagery for Near Real Time Services
The focus of the study is analysing storm peak/center propagation, front movement and arrival of swell using newest remote sensing information, numerical models, in-situ measurements and their combination. For this purposes, a new empirical algorithm for sea state retrieval from satellite borne Sentinel-1 (S1) Synthetic Aperture Radar (SAR) imagery was developed. The algorithm is applied inside a new processor for meteo-marine parameter estimation for Near Real Time (NRT) applications. These NRT-applications include the investigation of geophysical processes using different satellite modes ranging from high resolution modes with small image coverage of ~20km in open ocean to low resolution modes with wide coverage of ~250km in shelf areas.The quick developments in satellite techniques, processors, algorithms and ground infrastructures provide new possibilities for series of oceanographic applications in the last years. These new techniques allow estimation of a wide range of oceanographic information including properties of surface waves and internal waves, surface wind speed, sub-meso scale fronts and eddies, ice coverage, oil spills, coastal bathymetry, currents and others. Generally, the new high resolution products from different models allow verification of meteo-marine parameters more accurately. Here, a cross validation with different sea state model results using WWIII (NOAA) and CMEMS (COPERNICUS), with in situ buoy measurements and with satellite estimated parameters allowed an significant improvement of the accuracy of the derived sea state and wind fields. The new empirical algorithm allows estimation of total integrated sea state parameters including significant wave height Hs, first moment wave period Tm1, second moment period Tm2, mean period Tm and also partial integrated parameters like swell and windsea wave heights and windsea period. The algorithm allows processing of different S1 Synthetic Aperture Radar (SAR) modes into sea state fields: S1 Wave Mode (WV) acquires multiple vignettes with an extent of ~20km×20km and each displaced by 100 km along satellite tracks in open ocean (global). About 60 tracks around the globe have been acquired per day. The relatively high spatial resolution of ~4 m allows estimating wave height with accuracy of ~35cm. This is comparable with the accuracy of satellite altimetry and a new achievement for SAR based techniques. S1 Interferometric Wide Swath Mode (IW) covers area-strips of thousand kilometres of earth and ocean surface in coastal areas with a resolution of ~30m by sequences of multiple images with an approximate size of 200km×250km. The accuracy of ~ 70cm (Hs) for this mode is not as so high as for S1-WV, because the short waves are not visible for S1-IW mode and imaged as noise. However, the accuracy is much higher than state-of-the-art methods for this mode. The algorithm has been integrated into a prototype processor for Sentinel-1 SAR imagery. The DLR Ground Station Neustrelitz applies this prototype as part of a near real-time demonstrator MSA service. The presented scientific service involves daily provision of surface wind and sea state parameters estimated fully automatically from S1 IW images of North and Baltic Sea in and around German territorial waters.
- 23 March 2020
- Published by Copernicus GmbH
Open AccessNew Algorithm and Processor for Obtaining Maritime Information from Sentinel-1 Radar Imagery for Near Real Time Services
The focus of the study is analysing storm peak/center propagation, front movement and arrival of swell using newest remote sensing information, numerical models, in-situ measurements and their combination. For this purposes, a new empirical algorithm for sea state retrieval from satellite borne Sentinel-1 (S1) Synthetic Aperture Radar (SAR) imagery was developed. The algorithm is applied inside a new processor for meteo-marine parameter estimation for Near Real Time (NRT) applications. These NRT-applications include the investigation of geophysical processes using different satellite modes ranging from high resolution modes with small image coverage of ~20km in open ocean to low resolution modes with wide coverage of ~250km in shelf areas.The quick developments in satellite techniques, processors, algorithms and ground infrastructures provide new possibilities for series of oceanographic applications in the last years. These new techniques allow estimation of a wide range of oceanographic information including properties of surface waves and internal waves, surface wind speed, sub-meso scale fronts and eddies, ice coverage, oil spills, coastal bathymetry, currents and others. Generally, the new high resolution products from different models allow verification of meteo-marine parameters more accurately. Here, a cross validation with different sea state model results using WWIII (NOAA) and CMEMS (COPERNICUS), with in situ buoy measurements and with satellite estimated parameters allowed an significant improvement of the accuracy of the derived sea state and wind fields. The new empirical algorithm allows estimation of total integrated sea state parameters including significant wave height Hs, first moment wave period Tm1, second moment period Tm2, mean period Tm and also partial integrated parameters like swell and windsea wave heights and windsea period. The algorithm allows processing of different S1 Synthetic Aperture Radar (SAR) modes into sea state fields: S1 Wave Mode (WV) acquires multiple vignettes with an extent of ~20km×20km and each displaced by 100 km along satellite tracks in open ocean (global). About 60 tracks around the globe have been acquired per day. The relatively high spatial resolution of ~4 m allows estimating wave height with accuracy of ~35cm. This is comparable with the accuracy of satellite altimetry and a new achievement for SAR based techniques. S1 Interferometric Wide Swath Mode (IW) covers area-strips of thousand kilometres of earth and ocean surface in coastal areas with a resolution of ~30m by sequences of multiple images with an approximate size of 200km×250km. The accuracy of ~ 70cm (Hs) for this mode is not as so high as for S1-WV, because the short waves are not visible for S1-IW mode and imaged as noise. However, the accuracy is much higher than state-of-the-art methods for this mode. The algorithm has been integrated into a prototype processor for Sentinel-1 SAR imagery. The DLR Ground Station Neustrelitz applies this prototype as part of a near real-time demonstrator MSA service. The presented scientific service involves daily provision of surface wind and sea state parameters estimated fully automatically from S1 IW images of North and Baltic Sea in and around German territorial waters.
- Open Access
- 7 March 2019
- Published by MDPI AG in Remote Sensing
- Vol. 11 (5) , 563
Extension of Ship Wake Detectability Model for Non-Linear Influences of Parameters Using Satellite Based X-Band Synthetic Aperture Radar
The physics of the imaging mechanism underlying the emergence of ship wakes in Synthetic Aperture Radar (SAR) images has been studied in the past by many researchers providing a well-understood theory. Therefore, many publications describe how well ship wakes are detectable on SAR under the influence of different environmental conditions like sea state or local wind, ship properties like ship speed or ship heading, and image acquisition parameters like incidence angle or satellite heading. The increased imaging capabilities of current satellite SAR missions facilitate the collection of large datasets of moving vessels. Such a large dataset of high resolution TerraSAR-X acquisitions now enables the quantitative analysis of the previously formulated theory about the detectability of ship wakes using real data. In this paper we propose an extension of our wake detectability model by using a non-linear basis which allows consideration of all the influencing parameters simultaneously. Such an approach provides new insights and a better understanding of the non-linear influence of parameters on the wake detectability and their interdependencies can now be represented. The results show that the non-linear, interdependent influence of the different influencing parameters on the detectability of wakes matches well to the oceanographic expectations published in the past. Also possible applications of the model for the extraction of missing parameters and automatic for wake detection systems are demonstrated.
- 7 March 2019
- Published by MDPI AG in Remote Sensing
- Vol. 11 (5) , 563
Open AccessExtension of Ship Wake Detectability Model for Non-Linear Influences of Parameters Using Satellite Based X-Band Synthetic Aperture Radar
The physics of the imaging mechanism underlying the emergence of ship wakes in Synthetic Aperture Radar (SAR) images has been studied in the past by many researchers providing a well-understood theory. Therefore, many publications describe how well ship wakes are detectable on SAR under the influence of different environmental conditions like sea state or local wind, ship properties like ship speed or ship heading, and image acquisition parameters like incidence angle or satellite heading. The increased imaging capabilities of current satellite SAR missions facilitate the collection of large datasets of moving vessels. Such a large dataset of high resolution TerraSAR-X acquisitions now enables the quantitative analysis of the previously formulated theory about the detectability of ship wakes using real data. In this paper we propose an extension of our wake detectability model by using a non-linear basis which allows consideration of all the influencing parameters simultaneously. Such an approach provides new insights and a better understanding of the non-linear influence of parameters on the wake detectability and their interdependencies can now be represented. The results show that the non-linear, interdependent influence of the different influencing parameters on the detectability of wakes matches well to the oceanographic expectations published in the past. Also possible applications of the model for the extraction of missing parameters and automatic for wake detection systems are demonstrated.
- Open Access
- 17 January 2019
- Published by Taylor & Francis in International Journal of Remote Sensing
- Vol. 40 (11) , 4104-4142
Estimation of sea state from Sentinel-1 Synthetic aperture radar imagery for maritime situation awareness
A new empirical algorithm CWAVE_S1-IW for estimation of significant wave height Hs including swell and wind sea from C-band satellite-borne Synthetic Aperture Radar (SAR) data has been developed for Sentinel-1 (S1) Interferometric Wide Swatrh Mode (IW) imagery. The algorithm was implemented into the Sea Sate Processor (SSP) for fully automatic processing for near real time (NRT) services and allow the estimation of wave fields of thousands of kilometres in the flight direction and 250 km swath from S1 IW scenes consisting of a sequence of individual images. The priority of CWAVE_S1-IW development was an automatic, fast and robust raster processing independent of wave patterns, applicable even when only clutter is visible in the SAR images. The algorithm is based on the spectral analysis of subscenes in wavenumber space. The empirical function allows direct Hs estimation from image spectra without first converting them into wave spectra and uses integrated image spectra parameters as well as estimated local wind information. A texture analysis based on Grey Level Co-occurrence Matrices (GLCM) is also applied. In this way, also the parameters of short waves can be estimated, which are not visible in S1 IW images and are only represented by clutter. The algorithm was tuned worldwide using in-situ collocated measurements of 92 buoys with more than 2500 acquisitions. The validated SSP allows automatic processing of worldwide S1 IW images in VV or HH polarization, including Atlantic storms, cyclones, and huge storms in the Gulf of Alaska with a root-mean-square (RMSE) error of 80 cm for Hs. For the closed seas like the North Sea, Baltic Seas and Black Sea the accuracy is higher with an RMSE = 55 cm. The algorithm is integrated into a demonstration service, used for further validation at the DLR ground station in Neustrelitz. The NRT processing has been tested by supporting a research ship cruise in the Antarctic Sea.
- 17 January 2019
- Published by Taylor & Francis in International Journal of Remote Sensing
- Vol. 40 (11) , 4104-4142
Open AccessEstimation of sea state from Sentinel-1 Synthetic aperture radar imagery for maritime situation awareness
A new empirical algorithm CWAVE_S1-IW for estimation of significant wave height Hs including swell and wind sea from C-band satellite-borne Synthetic Aperture Radar (SAR) data has been developed for Sentinel-1 (S1) Interferometric Wide Swatrh Mode (IW) imagery. The algorithm was implemented into the Sea Sate Processor (SSP) for fully automatic processing for near real time (NRT) services and allow the estimation of wave fields of thousands of kilometres in the flight direction and 250 km swath from S1 IW scenes consisting of a sequence of individual images. The priority of CWAVE_S1-IW development was an automatic, fast and robust raster processing independent of wave patterns, applicable even when only clutter is visible in the SAR images. The algorithm is based on the spectral analysis of subscenes in wavenumber space. The empirical function allows direct Hs estimation from image spectra without first converting them into wave spectra and uses integrated image spectra parameters as well as estimated local wind information. A texture analysis based on Grey Level Co-occurrence Matrices (GLCM) is also applied. In this way, also the parameters of short waves can be estimated, which are not visible in S1 IW images and are only represented by clutter. The algorithm was tuned worldwide using in-situ collocated measurements of 92 buoys with more than 2500 acquisitions. The validated SSP allows automatic processing of worldwide S1 IW images in VV or HH polarization, including Atlantic storms, cyclones, and huge storms in the Gulf of Alaska with a root-mean-square (RMSE) error of 80 cm for Hs. For the closed seas like the North Sea, Baltic Seas and Black Sea the accuracy is higher with an RMSE = 55 cm. The algorithm is integrated into a demonstration service, used for further validation at the DLR ground station in Neustrelitz. The NRT processing has been tested by supporting a research ship cruise in the Antarctic Sea.
- Open Access
- 15 May 2018
- Published by MDPI AG in Remote Sensing
- Vol. 10 (5) , 757
Meteo-Marine Parameters from Sentinel-1 SAR Imagery: Towards Near Real-Time Services for the Baltic Sea
A method for estimating meteo-marine parameters from satellite Synthetic Aperture Radar (SAR) data, intended for near-real-time (NRT) service over the Baltic Sea, is presented and validated. Total significant wave height data are retrieved with an empirical function CWAVE_S1-IW, which combines spectral analysis of Sentinel-1A/B Interferometric Wide swath (IW) subscenes with wind data derived with common C-Band Geophysical Model Functions (GMFs). In total, 15 Sentinel-1A/B scenes (116 acquisitions) over the Baltic Sea were processed for comparison with off-shore sea state measurements (52 collocations) and coastal wind measurements (357 colocations). Sentinel-1 wave height was spatially compared with WAM wave model results (Copernicus Marine Environment Monitoring Service (CMEMS). The comparison of SAR-derived wave heights shows good agreement with measured wave heights correlation r of 0.88 and with WAM model (r = 0.85). The wind speed estimated from SAR images yields good agreement with in situ data (r = 0.91). The study demonstrates that the wave retrievals from Sentinel-1 IW data provide valuable information for operational and statistical monitoring of wave conditions in the Baltic Sea. The data is valuable for model validation and interpretation in regions where, and during periods when, in situ measurements are missing. The Sentinel-1 A/B wave retrievals provide more detailed information about spatial variability of the wave field in the coastal zone compared to in situ measurements, altimetry wave products and model forecast. Thus, SAR data enables estimation of storm locations and areal coverage. Methods shown in the study are implemented in NRT service in German Aerospace Center’s (DLR) ground station Neustrelitz.
- 15 May 2018
- Published by MDPI AG in Remote Sensing
- Vol. 10 (5) , 757
Open AccessMeteo-Marine Parameters from Sentinel-1 SAR Imagery: Towards Near Real-Time Services for the Baltic Sea
A method for estimating meteo-marine parameters from satellite Synthetic Aperture Radar (SAR) data, intended for near-real-time (NRT) service over the Baltic Sea, is presented and validated. Total significant wave height data are retrieved with an empirical function CWAVE_S1-IW, which combines spectral analysis of Sentinel-1A/B Interferometric Wide swath (IW) subscenes with wind data derived with common C-Band Geophysical Model Functions (GMFs). In total, 15 Sentinel-1A/B scenes (116 acquisitions) over the Baltic Sea were processed for comparison with off-shore sea state measurements (52 collocations) and coastal wind measurements (357 colocations). Sentinel-1 wave height was spatially compared with WAM wave model results (Copernicus Marine Environment Monitoring Service (CMEMS). The comparison of SAR-derived wave heights shows good agreement with measured wave heights correlation r of 0.88 and with WAM model (r = 0.85). The wind speed estimated from SAR images yields good agreement with in situ data (r = 0.91). The study demonstrates that the wave retrievals from Sentinel-1 IW data provide valuable information for operational and statistical monitoring of wave conditions in the Baltic Sea. The data is valuable for model validation and interpretation in regions where, and during periods when, in situ measurements are missing. The Sentinel-1 A/B wave retrievals provide more detailed information about spatial variability of the wave field in the coastal zone compared to in situ measurements, altimetry wave products and model forecast. Thus, SAR data enables estimation of storm locations and areal coverage. Methods shown in the study are implemented in NRT service in German Aerospace Center’s (DLR) ground station Neustrelitz.