CJChandan Jana

Chandan Jana

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Chandan Jana has a total of 14 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Mamba-driven linear-time sequence learning architecture for efficient power quality disturbance classification

    by Pintu Das, Chandan Jana, Sannistha Banarjee, Subhajit Maur, Mousumi Jana Bala, Sovan Dalai

    The modernization of electrical power systems has accelerated the transition from conventional centralized grids to intelligent, cyber-enabled smart grids characterized by bidirectional energy flow, advanced sensing, and real-time data-driven control. However, the large-scale integration of inverter-interfaced renewable energy sources and nonlinear loads has introduced significant power quality (PQ) challenges, including voltage sag, swell, harmonics, flicker, transients, and composite disturbances under noisy conditions. Accurate and computationally efficient detection of such disturbances is critical for intelligent digital relaying and real-time monitoring applications. To address these challenges, this paper proposes a deep learning framework based on a Mamba-driven state-space model architecture for comprehensive PQ disturbance classification. The proposed approach converts voltage waveforms into structured two-dimensional patches using convolutional operations, which are then transformed into sequential representations for efficient long-sequence modeling via the Mamba module. Spatial feature extraction and temporal dependency learning are jointly achieved, while maintaining linear-time complexity and reduced memory requirements compared to transformer-based architectures. The extracted latent features are subsequently classified using a deep neural network (DNN)followed by s o f t m a x classifier. Eighteen PQ disturbance categories, defined in accordance with IEEE standards, are considered, including single and composite disturbances under noisy operating conditions. Experimental evaluation examines feature representations, convergence characteristics, confusion matrix performance, computational time, and memory usage. Comparative results demonstrate that the proposed Mamba-based framework achieves high classification accuracy with significantly lower computational complexity than conventional transformer models. The findings indicate that the proposed method is well-suited for real-time smart grid monitoring and intelligent protection systems.

  • Deep Learning-Based Detection of Smart Grid Power Quality Disturbances Using Convolutional Neural Networks and Recurrence Plot Techniques

    by Pintu Das, Chandan Jana, Sannistha Banerjee, Subhajit Maur, Mousumi Janabala, Sovan Dalai

    Accurate sensing of power quality disturbances (PQD) is essential for the effective and reliable operation of the smart grid network. It is quite challenging to identify the different types of PQDs for uninterrupted power flow in the smart grid network. In this situation, this article proposes a convolution neural network (CNN) based deep learning (DL) technique to detect smart grid electrical disturbances. For this purpose, eighteen types of PQDs are generated following the standards, and corresponding voltage and current signals are recorded. From those recorded signals, the required input images for training the developed model are generated using the recurrence plot (RP) technique. Thereafter, at three sets of convolution layers, three convolution operations are performed using 16, 32, and 64 kernel filters, respectively, to extract feature maps. The extracted feature maps are flattened in the form of a single 1D vector for the input of dense layers. Finally, a sof tmax activation function is applied to obtain the probability values of all categories. The robustness of the proposed RP-CNN framework was confirmed through 10-fold cross-validation. Besides, for the purpose of comparison, two benchmark CNN classifiers have also been tested. The proposed model shows a 99.33% accuracy value. The performance of the classifier has been evaluated by deriving the usual performance indices from obtained confusion matrix and also using a circos plot.

  • IoT-based real-time power system disturbances detection using CNN-aided BiLSTM

    by Chandan Jana, Sannistha Banerjee, Subhajit Maur, Mousumi Jana Bala, Sovan Dalai

  • Classifying power system disturbances with DFA and 1-NN: a robust machine learning approach

    by Chandan Jana, Sannistha Banerjee, Subhajit Maur, Sovan Dalai

    This paper presents an efficient and straightforward machine learning (ML) algorithm designed for the rapid detection of the most frequently occurring disturbances in microgrid (MG) systems. A laboratory-based MG was constructed, including components such as nonlinear loads, compensating devices, inductive loads, grid synchronization features, a battery charging circuit, switching relays, instrument transformers, and a signal acquisition system. Initially, valuable informative data were filtered from the acquired signals using an unsupervised k -means clustering technique, followed by feature extraction through detrended fluctuation analysis (DFA). The feature matrix was then reduced by retaining only the most important principal components (PC) before applying the 1-Nearest Neighbour (1-NN) supervised ML algorithm. Finally, the proposed method was compared to eight other benchmark ML algorithms based on class-wise accuracy. Besides, the performance was also examined in noisy environments.

  • Condition Sensing of Overhead Line Insulator Strings Using an Advanced CNN-Based Classifier Based on Infrared Thermography

    by R. K. Mandal, Chandan Jana, R. Barua, Subhajit Maur, B. Chatterjee, Susanta Ray, Sovan Dalai

    This letter proposes an advanced convolutional neural network (CNN)-based classifier for detecting the contamination level of in-service insulator strings. The goal is to enhance condition monitoring of insulators and ensure safe and reliable power system operation under adverse weather conditions and polluted environments. All possible partial and full contamination cases of a string of three disc insulators have been considered. Infrared thermography images taken from a safe distance have been cropped to consider the effective portions before being fed into a convolution-based deep neural network. The classifier has been trained with a total of 1248 thermal images across 12 contamination classes achieving an accuracy level of 99.04%. The proposed classifier has also been compared with two other benchmark CNN models.


  • Sensing of Power System Disturbances Using CNN-Aided Tailored BiLSTM Model

    by Chandan Jana, Sannistha Banerjee, Subhajit Maur, Sovan Dalai

    Fast and accurate detection of power system disturbance-creating events is very much essential for the safe and reliable operation of today’s power distribution network. This task becomes more challenging when two events occur simultaneously. In this work, a deep learning network-based classifier has been proposed to classify the events that are likely to occur in the power system. Here, a few normal events like switching, load changing, all feasible faults, and five dual events have been considered. All acquired disturbance signals are allowed to go through three major stages. At the initial stage, signal-to-image conversion takes place using continuous wavelet transform (CWT) followed by a couple of convolution operations for feature extraction, and then, the extracted time series data have been fed to the input of Bidirectional Long Short Term Memory (BiLSTM) module. Finally, the softmax output classifier has been applied. Few other popular classifiers have also been studied for comparison. Using this proposed method, 98.57% accuracy has been achieved considering twenty-one feasible events.


  • Power System Disturbance Classification Using CWT Guided Customized AlexNet CNN

    by Chandan Jana, Sannistha Banerjee, Subhajit Maur, Sovan Dalai

    This letter aims at designing a convolution neural network (CNN)-based classifier that detects and classifies 13 different types of power system events causing poor power quality. Early and accurate detection of those classes of disturbances helps power engineers take quick and suitable measures to protect power system components and to supply uninterrupted power to the consumers. The whole process comprises of the sensing of disturbance creating current signals from experimental setup, filtration by unsupervised $k$ -mean machine learning to remove noisy data, Big Data generation, architectural modification of AlexNet CNN, time–frequency informative image creation by continuous wavelet transform followed by convolution using kernel filters, and classification and performance evaluation. The proposed customized CNN has been compared with other benchmark CNN architectures. The method has shown 98.46 ${\%}$ accuracy with minimum computational time.


  • Mathematical Morphology-Based Sensing of Power System Disturbances Using PCA-Aided Support Vector Machine

    by Chandan Jana, Sannistha Banerjee, Subhajit Maur, Sovan Dalai

    This paper introduces a methodology of Mathematical Morphology (MM) based Power System Disturbances (PSD) sensing using Principal Component Analysis aided Support Vector Machine (SVM). The PSD data is acquired from a real time laboratory based isolated Distributed Generator (DG) having a grid synchronization arrangement where a large number of system disturbances have been created to develop and validate the model. The statistical features are extracted from the acquired data using Mathematical Morphology (MM). The high dimensional correlated feature variables are transformed into a smaller set of uncorrelated variables called principal components using Principal Component Analysis (PCA). Finally, a Support Vector Machine (SVM) based Machine Learning (ML) algorithm has been proposed using a quadratic polynomial kernel function to classify the disturbances and the performance of the algorithm has also been assessed. The results show that the performance of the proposed method is acceptable for sensing PSD. The present method is generic in nature and can be implemented for similar problems.


  • Wavelet Aided KNN Based Power System Disturbances Classification

    by Chandan Jana, Subhajit Maur, Sannistha Banerjee, Sovan Dalai

    In this work, few most commonly occurring Power System Disturbances (PSD) have been considered for their detection and classification with the help of K Nearest Neighbor (KNN) based Machine Learning (ML) technique. Experimentally created disturbance signals have been processed using Discrete Wavelet Transform (DWT) to obtain time and frequency domain information before they have been fed to KNN based classifiers. The switching, line faults and load change have been chosen as disturbing creating events. The performance of the proposed method has been compared with linear discriminant and linear support vector machine based methods. The accuracy level of the proposed method has been shown to be 97.1%.