Abdul Rahman Mohd Sam
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Abdul Rahman Mohd Sam has a total of 33 co-authors. Here are the top co-authors by number of shared publications:
Hossein Mohammadhosseini
Institute for Smart Infrastructure and Innovative Construction (ISIIC), Construction Research Centre (CRC), Faculty of Civil Engineering, Universiti Teknologi Malaysia (UTM), 81310, Skudai, Johor, Malaysia
3 shared publications- Jamaludin Mohamad Yatim
Faculty of Civil Engineering, Universiti Teknologi Malaysia, 81310 Skudai, Johor, Malaysia
2 shared publications - Mahmood Md. Tahir
Institute for Smart Infrastructure and Innovative Construction (ISIIC), School of Civil Engineering, Faculty of Engineering, Universiti Teknologi Malaysia, Skudai 81310, Johor, Malaysia
2 shared publications - Mostafa Samadi
Institute for Smart Infrastructure and Innovative Construction (ISIIC), School of Civil Engineering, Faculty of Engineering, Universiti Teknologi Malaysia (UTM), 81310, Skudai, Johor, Malaysia
2 shared publications - Nor Hasanah Abdul Shukor Lim
UTM Construction Research Centre, Universiti Teknologi Malaysia
2 shared publications - Nur Hafizah Abd Khalid
Faculty of Civil Engineering, Universiti Teknologi Malaysia, Johor Bahru 81310, Johor, Malaysia
2 shared publications
Latest Publications
- 13 June 2025
- Published by Penerbit UTM Press in Jurnal Teknologi (Sciences & Engineering)
- Vol. 87 (4) , 809-817
PUNCHING SHEAR RESISTANCE OF STEEL FIBRE REINFORCED SELF-COMPACTING CONCRETE ONE-WAY RIBBED SLAB
In the field of modern construction engineering, the steel fiber reinforced self-compacting concrete (SFRSCC) represents a significant advancement over conventional reinforcement methodologies, presenting a promising avenue for achieving economic and temporal efficiencies without sacrificing structural robustness. This study focuses on the use of SFRSCC in the context of one-way ribbed slabs, which are strategically chosen for optimal performance in scenarios requiring an appropriate compromise of architectural aesthetics and mechanical strength, particularly in structures with medium spans, strict height, and overall mass constraints. The study investigates the advantages of the inherent stiffness of ribbed slabs and the outstanding compaction capabilities of self-compacting concrete (SCC) using an in-depth method that involves material selection, mix design, sample preparation, and comprehensive testing. The empirical results of this work show a considerable increase in the load-bearing capacity and ductility of SFSCC slabs, which is an immediate consequence of the steel fibers' characteristic high tensile strength and crack mitigation capabilities. This investigation highlights the improved structural performance and durability of SFRSCC in one-way ribbed slab applications and provides substantial evidence for its broader utilization in a variety of structural engineering projects, signalling a paradigm change in the direction of more sustainable and effective construction techniques.
- 13 June 2025
- Published by Penerbit UTM Press in Jurnal Teknologi (Sciences & Engineering)
- Vol. 87 (4) , 809-817
PUNCHING SHEAR RESISTANCE OF STEEL FIBRE REINFORCED SELF-COMPACTING CONCRETE ONE-WAY RIBBED SLAB
In the field of modern construction engineering, the steel fiber reinforced self-compacting concrete (SFRSCC) represents a significant advancement over conventional reinforcement methodologies, presenting a promising avenue for achieving economic and temporal efficiencies without sacrificing structural robustness. This study focuses on the use of SFRSCC in the context of one-way ribbed slabs, which are strategically chosen for optimal performance in scenarios requiring an appropriate compromise of architectural aesthetics and mechanical strength, particularly in structures with medium spans, strict height, and overall mass constraints. The study investigates the advantages of the inherent stiffness of ribbed slabs and the outstanding compaction capabilities of self-compacting concrete (SCC) using an in-depth method that involves material selection, mix design, sample preparation, and comprehensive testing. The empirical results of this work show a considerable increase in the load-bearing capacity and ductility of SFSCC slabs, which is an immediate consequence of the steel fibers' characteristic high tensile strength and crack mitigation capabilities. This investigation highlights the improved structural performance and durability of SFRSCC in one-way ribbed slab applications and provides substantial evidence for its broader utilization in a variety of structural engineering projects, signalling a paradigm change in the direction of more sustainable and effective construction techniques.
- Open Access
- 17 February 2025
- Published by University of Zielona Góra, Poland in Civil and Environmental Engineering Reports
- Vol. 35 (1) , 301-315
Optimising The Performance of Carbide Lime Waste Mortar: The Role of Temperature in Accelerated CO2 Curing
This study examined the effects of elevated temperatures higher than ambient temperature on the physical, mechanical, and CO2 (carbon dioxide) capturing performance of Carbide Lime Waste (CLW) mortars with 20% cement replacement at early curing ages (1, 3 and 7 days). The CLW mortars cured under accelerated CO2 curing (CLW20acc) were compared with the control samples under ambient curing (CLW20). The temperatures were set at 30°C, 40°C and 60°C with fixed 20% CO2 concentration. Key assessments include density, compressive and flexural strengths, carbonation depth, and microstructural analyses using Thermogravimetric analysis (TGA). Results revealed that mortar densities decreased with increased temperature, but higher curing temperatures significantly enhanced the performance of CLW20acc mortars over control samples. At 60°C, carbonation depth reached 8.50%, 36.18%, and 86.25% after 1, 3, and 7 days, respectively, while compressive strength increased by 51.5% at day 7 compared to day 1. TGA results demonstrated progressive CaCO3 (calcium carbonate) precipitation from 26.6% on day 1 to 58.5% on day 7, indicating calcium silicate and portlandite conversion into carbonates. XRD study showed calcite as the main phase and vaterite to aragonite as curing temperature and age arose. Ambient curing reduced mechanical strength and carbonation performance in all control samples. These findings demonstrate that elevated temperatures expedite carbonation and enhance the mechanical properties of CLW mortars, validating the potential of accelerated CO2 curing as a sustainable strategy for optimising lime-based materials. This approach offers a dual benefit: reducing CO2 emissions while leveraging elevated CO2 levels to improve construction material performance.
- 17 February 2025
- Published by University of Zielona Góra, Poland in Civil and Environmental Engineering Reports
- Vol. 35 (1) , 301-315
Open AccessOptimising The Performance of Carbide Lime Waste Mortar: The Role of Temperature in Accelerated CO2 Curing
This study examined the effects of elevated temperatures higher than ambient temperature on the physical, mechanical, and CO2 (carbon dioxide) capturing performance of Carbide Lime Waste (CLW) mortars with 20% cement replacement at early curing ages (1, 3 and 7 days). The CLW mortars cured under accelerated CO2 curing (CLW20acc) were compared with the control samples under ambient curing (CLW20). The temperatures were set at 30°C, 40°C and 60°C with fixed 20% CO2 concentration. Key assessments include density, compressive and flexural strengths, carbonation depth, and microstructural analyses using Thermogravimetric analysis (TGA). Results revealed that mortar densities decreased with increased temperature, but higher curing temperatures significantly enhanced the performance of CLW20acc mortars over control samples. At 60°C, carbonation depth reached 8.50%, 36.18%, and 86.25% after 1, 3, and 7 days, respectively, while compressive strength increased by 51.5% at day 7 compared to day 1. TGA results demonstrated progressive CaCO3 (calcium carbonate) precipitation from 26.6% on day 1 to 58.5% on day 7, indicating calcium silicate and portlandite conversion into carbonates. XRD study showed calcite as the main phase and vaterite to aragonite as curing temperature and age arose. Ambient curing reduced mechanical strength and carbonation performance in all control samples. These findings demonstrate that elevated temperatures expedite carbonation and enhance the mechanical properties of CLW mortars, validating the potential of accelerated CO2 curing as a sustainable strategy for optimising lime-based materials. This approach offers a dual benefit: reducing CO2 emissions while leveraging elevated CO2 levels to improve construction material performance.
- Open Access
- 23 May 2024
- Published by Editorial CSIC in Materiales de Construcción
- Vol. 74 (354) , e343
Transport properties of fly ash-slag-based geopolymer concrete with 2M sodium hydroxide combined with variations in slag percentage, Al/Bi ratio, and SS/SH ratio
The aim of this research is to determine the effect of sodium hydroxide molarity 2M combined with variations in slag percentage, ratio of alkali activator to binder (Al/Bi), and ratio of sodium silicate to sodium hydroxide (SS/SH) on the transport properties of fly ash-slag-based GPC cured at ambient temperature. The result is increase in slag percentage and SS/SH ratio lead to a decrease in porosity, water absorption rate and chloride permeability. The alkali activator to binder (Al/Bi) ratio of 0.45 produces the lowest porosity, water absorption rate, and chloride permeability. The porosity, sorptivity, and chloride penetration depths of all GPC are lower than those of OPC. The recommended mix compositions for GPC that exhibit lower transport properties than OPC are GPC4 (slag 40%, SS/SH ratio 1.5, Al/Bi ratio 0.45); GPC5 (slag 50%, SS/SH ratio 1.5, Al/Bi ratio 0.45); and GPC7 (slag 30%, SS/SH ratio 2.0, Al/Bi ratio 0.45).
- 23 May 2024
- Published by Editorial CSIC in Materiales de Construcción
- Vol. 74 (354) , e343
Open AccessTransport properties of fly ash-slag-based geopolymer concrete with 2M sodium hydroxide combined with variations in slag percentage, Al/Bi ratio, and SS/SH ratio
The aim of this research is to determine the effect of sodium hydroxide molarity 2M combined with variations in slag percentage, ratio of alkali activator to binder (Al/Bi), and ratio of sodium silicate to sodium hydroxide (SS/SH) on the transport properties of fly ash-slag-based GPC cured at ambient temperature. The result is increase in slag percentage and SS/SH ratio lead to a decrease in porosity, water absorption rate and chloride permeability. The alkali activator to binder (Al/Bi) ratio of 0.45 produces the lowest porosity, water absorption rate, and chloride permeability. The porosity, sorptivity, and chloride penetration depths of all GPC are lower than those of OPC. The recommended mix compositions for GPC that exhibit lower transport properties than OPC are GPC4 (slag 40%, SS/SH ratio 1.5, Al/Bi ratio 0.45); GPC5 (slag 50%, SS/SH ratio 1.5, Al/Bi ratio 0.45); and GPC7 (slag 30%, SS/SH ratio 2.0, Al/Bi ratio 0.45).
- RetractionOpen Access
- 8 June 2023
- Published by Elsevier in Journal of Cleaner Production
- Vol. 414, 137727
Retraction notice to “Enhanced performance for aggressive environments of green concrete composites reinforced with waste carpet fibers and palm oil fuel ash” [J. Clean. Prod. 185 (1) (June 2018) 252–265]
- 8 June 2023
- Published by Elsevier in Journal of Cleaner Production
- Vol. 414, 137727
RetractionOpen AccessRetraction notice to “Enhanced performance for aggressive environments of green concrete composites reinforced with waste carpet fibers and palm oil fuel ash” [J. Clean. Prod. 185 (1) (June 2018) 252–265]
- RetractionOpen Access
- 8 June 2023
- Published by Elsevier in Journal of Cleaner Production
- Vol. 414, 137729
Retraction notice to “Durability performance of green concrete composites containing waste carpet fibers and palm oil fuel ash” [J. Clean. Prod. 144 (2017) 448–458]
- 8 June 2023
- Published by Elsevier in Journal of Cleaner Production
- Vol. 414, 137729
RetractionOpen AccessRetraction notice to “Durability performance of green concrete composites containing waste carpet fibers and palm oil fuel ash” [J. Clean. Prod. 144 (2017) 448–458]
- RetractionOpen Access
- 6 April 2023
- Published by Elsevier in Construction and Building Materials
- Vol. 380, 131192
Retraction notice to “The feasibility of improving impact resistance and strength properties of sustainable concrete composites by adding waste metalized plastic fibres” [Constr. Build. Mater. 169 (2018) 223–236]
- 6 April 2023
- Published by Elsevier in Construction and Building Materials
- Vol. 380, 131192
RetractionOpen AccessRetraction notice to “The feasibility of improving impact resistance and strength properties of sustainable concrete composites by adding waste metalized plastic fibres” [Constr. Build. Mater. 169 (2018) 223–236]
- Open Access
- 22 December 2018
- Published by Engineering, Technology & Applied Science Research in Engineering, Technology & Applied Science Research
- Vol. 8 (6) , 3536-3540
Effect of Improper Curing on the Properties of Normal Strength Concrete
In real applications, 28 days are regarded as proper curing time for concrete. There is a self-evident need to minimize the duration of curing days. For this purpose, this research investigates 1 to 7 days of curing and compares it with concrete cured for 28 days. Three grades of normal concrete strength grade 30, grade 35 and grade 40 were made. After curing, two exposure conditions were applied to the concrete, inside laboratory-controlled environment and outside environment. Results indicate that slump increases with cement content in DOE method at constant water content. The concrete density in all grades reduces when the concrete is subject to inside exposure in comparison with outside exposure. Water loss from concrete reduces with increase in curing days in all concrete grades. Compression strength of all concrete grades increases with increase in curing days. For the uniformity of concrete, ultrasonic pulse velocity indicated that with an increase in curing days, concrete becomes denser and a bit void. Results showed that an increase in curing days also improves the surface quality of concrete. The significance point noticed is that there was not much difference in the concrete properties between 7 days of curing and 28 days of curing in all grades.
- 22 December 2018
- Published by Engineering, Technology & Applied Science Research in Engineering, Technology & Applied Science Research
- Vol. 8 (6) , 3536-3540
Open AccessEffect of Improper Curing on the Properties of Normal Strength Concrete
In real applications, 28 days are regarded as proper curing time for concrete. There is a self-evident need to minimize the duration of curing days. For this purpose, this research investigates 1 to 7 days of curing and compares it with concrete cured for 28 days. Three grades of normal concrete strength grade 30, grade 35 and grade 40 were made. After curing, two exposure conditions were applied to the concrete, inside laboratory-controlled environment and outside environment. Results indicate that slump increases with cement content in DOE method at constant water content. The concrete density in all grades reduces when the concrete is subject to inside exposure in comparison with outside exposure. Water loss from concrete reduces with increase in curing days in all concrete grades. Compression strength of all concrete grades increases with increase in curing days. For the uniformity of concrete, ultrasonic pulse velocity indicated that with an increase in curing days, concrete becomes denser and a bit void. Results showed that an increase in curing days also improves the surface quality of concrete. The significance point noticed is that there was not much difference in the concrete properties between 7 days of curing and 28 days of curing in all grades.
- Open Access
- 11 December 2018
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 250, 03005
Crack-healing in cementitious material to improve the durability of structures: Review
One of the most commonly used materials in the field of construction is concrete. Nevertheless, there are strong inclinations for concrete to form cracks, which would then allow the penetration of both aggressive and harmful substances into the concrete. Subsequently, this will decrease the durability of the affected structures. Thus, the ability for cracks to heal themselves in the affected cementitious materials is in demand to prolong the life of any structure. Autogenous self-healing is one approach to overcome smaller crack widths (macrocracks). Nowadays, crack width-healing is of great importance. Having said that, both polymers and bacteria are the most common approach to enhance autogenous self-healing and bond crack faces. Crack width-healing of up to 0.97 mm was achieved via bacteria-based self-healing. In this paper, the mechanisms of these approaches and their efficiency to heal crack were highlighted. Both bacteria-and polymers-based self-healing are promising techniques for the future. However, long term studies are still required before real applications can be made.
- 11 December 2018
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 250, 03005
Open AccessCrack-healing in cementitious material to improve the durability of structures: Review
One of the most commonly used materials in the field of construction is concrete. Nevertheless, there are strong inclinations for concrete to form cracks, which would then allow the penetration of both aggressive and harmful substances into the concrete. Subsequently, this will decrease the durability of the affected structures. Thus, the ability for cracks to heal themselves in the affected cementitious materials is in demand to prolong the life of any structure. Autogenous self-healing is one approach to overcome smaller crack widths (macrocracks). Nowadays, crack width-healing is of great importance. Having said that, both polymers and bacteria are the most common approach to enhance autogenous self-healing and bond crack faces. Crack width-healing of up to 0.97 mm was achieved via bacteria-based self-healing. In this paper, the mechanisms of these approaches and their efficiency to heal crack were highlighted. Both bacteria-and polymers-based self-healing are promising techniques for the future. However, long term studies are still required before real applications can be made.
- Open Access
- 23 November 2015
- Published by Penerbit UTM Press in Jurnal Teknologi (Sciences & Engineering)
- Vol. 77 (16)
PERFORMANCE OF EPOXY RESIN AS SELF-HEALING AGENT
Formation of cracks due to the shrinkage effects during curing and mechanical loading can deteriorate the concrete performance especially in terms of durability aspect. Chemical and harsh solutions will easily penetrate into the concrete and cause damage to the concrete. In order to solve this problem, researchers have introduced a self-healing concrete; the mechanism of automatically repairing concrete cracks without external intervention. Nowadays, the self-healing concrete by using bacteria as a healing agent had gained interest among researchers. In contrast, this paper presents the study on performance of epoxy resin without hardener as a self-healing agent in concrete. Mortar specimens were prepared with mass ratio of 1:3 (cement: fine aggregates), water-cement ratio of 0.48 and 5 to 20% epoxy resin of cement content. All tested specimens were subjected to wet-dry curing; where compressive strength, apparent porosity and self-healing evaluation were measured. Result shows that, the compressive strength of mortar with addition of epoxy resin by 10% increased significantly compared to normal mortar. Epoxy resin as a healing agent was found to be functioned well as the compressive strength and ultrasonic pulse velocity regain the initial reading with prolonged curing time. These results together with microstructure test indicate that epoxy resin can be used as a self-healing agent.
- 23 November 2015
- Published by Penerbit UTM Press in Jurnal Teknologi (Sciences & Engineering)
- Vol. 77 (16)
Open AccessPERFORMANCE OF EPOXY RESIN AS SELF-HEALING AGENT
Formation of cracks due to the shrinkage effects during curing and mechanical loading can deteriorate the concrete performance especially in terms of durability aspect. Chemical and harsh solutions will easily penetrate into the concrete and cause damage to the concrete. In order to solve this problem, researchers have introduced a self-healing concrete; the mechanism of automatically repairing concrete cracks without external intervention. Nowadays, the self-healing concrete by using bacteria as a healing agent had gained interest among researchers. In contrast, this paper presents the study on performance of epoxy resin without hardener as a self-healing agent in concrete. Mortar specimens were prepared with mass ratio of 1:3 (cement: fine aggregates), water-cement ratio of 0.48 and 5 to 20% epoxy resin of cement content. All tested specimens were subjected to wet-dry curing; where compressive strength, apparent porosity and self-healing evaluation were measured. Result shows that, the compressive strength of mortar with addition of epoxy resin by 10% increased significantly compared to normal mortar. Epoxy resin as a healing agent was found to be functioned well as the compressive strength and ultrasonic pulse velocity regain the initial reading with prolonged curing time. These results together with microstructure test indicate that epoxy resin can be used as a self-healing agent.
- 20 April 2015
- Published by Trans Tech Publications, Ltd. in Applied Mechanics and Materials
- Vol. 752-753, 610-616
Flexural Behavior of GFRP RC Beam Strengthened with Carbon Fiber Reinforced Polymer (CFRP) Plate: Cracking Behavior
There has been much research conducted on the current performance of Fiber Reinforced Polymer (FRP) as reinforcement. It was due to FRP easier to maintain than steel during construction because of less weight. Laboratory works on the flexural behavior of concrete beams that with GFRP and CFRP use as a plate strengthening for the beam size 2800 x 200 x 250 millimeter. study of the pattern of cracking and failure modes of the beam will be compared between the ten types of beams consisting of steel reinforced beams , beam-reinforced GFRP and GFRP reinforced beams strengthened with CFRP with different lengths. Comparing between the beam bending performance was examined through the ultimate load, cracking and failure modes.
- 20 April 2015
- Published by Trans Tech Publications, Ltd. in Applied Mechanics and Materials
- Vol. 752-753, 610-616
Flexural Behavior of GFRP RC Beam Strengthened with Carbon Fiber Reinforced Polymer (CFRP) Plate: Cracking Behavior
There has been much research conducted on the current performance of Fiber Reinforced Polymer (FRP) as reinforcement. It was due to FRP easier to maintain than steel during construction because of less weight. Laboratory works on the flexural behavior of concrete beams that with GFRP and CFRP use as a plate strengthening for the beam size 2800 x 200 x 250 millimeter. study of the pattern of cracking and failure modes of the beam will be compared between the ten types of beams consisting of steel reinforced beams , beam-reinforced GFRP and GFRP reinforced beams strengthened with CFRP with different lengths. Comparing between the beam bending performance was examined through the ultimate load, cracking and failure modes.