EKEvgeniy V. Khekert

Evgeniy V. Khekert

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Evgeniy V. Khekert has a total of 33 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Observation-Domain-Aware Multisensor Fusion for Intelligent Coastal Water-Quality Monitoring

    by Sergey I. Kondratyev, Evgeniy V. Khekert, Nikita V. Martyushev, Boris V. Malozyomov, Vladislav V. Kukartsev, Yadviga Aleksandrovna Tynchenko, Natalya Vladimirovna Fedorova, Valeriya V. Tynchenko, Roman V. Klyuev

    Reliable monitoring of coastal water quality requires the integration of sensors that differ in physical observation domain, spatiotemporal support, and uncertainty structure. We propose an observation-domain-aware multisensor fusion architecture in which CTD/DO/H2S/Eh profiling, laboratory measurements, Sentinel-2 MSI, Sentinel-3 OLCI/SLSTR, Landsat, and hydrometeorological context are combined only after preserving sensor identity, QA/QC status, and the independent physical observation unit. The experimental field dataset comprises four seasonal campaigns, 32 station–campaign groups, 336 depth records, 111 water samples, 1110 laboratory determinations, 16 satellite scenes, and 64 MSI/OLCI–in situ matchups. MSI/OLCI products showed strong agreement with surface chlorophyll-a, turbidity, and TSM measurements (ρ = 0.906–0.991). For hypoxia, nested leave-one-campaign-out (LOCO) validation yielded ROC-AUC/Brier scores of 0.860/0.157 for full fusion, 0.705/0.228 for optical-only sensing, and 0.899/0.045 for the geometry/context baseline, demonstrating non-monotonic fusion gain. A row-wise split that violated group independence produced an optimistically inflated ROC-AUC of 1.000. These results show that an intelligent sensing system should enforce endpoint-specific sensor compatibility, preserve censoring and uncertainty information, and be evaluated using physically independent observation units. Because the same sectors were revisited, the hypoxia metrics represent cross-campaign transfer within one transect, not geometry-independent within-sector change detection.

  • Open Access

    Risk-Aware Fault-Tolerant Multisensor Fusion for Human–Machine Decision Support in Autonomous Navigation and Mooring in Confined Waters

    by Sergey I. Kondratyev, Evgeniy V. Khekert, Nikita V. Martyushev, Boris V. Malozyomov, Vladislav V. Kukartsev, Valeriya V. Tynchenko, Tatyana Aleksandrovna Panfilova, Yadviga Aleksandrovna Tynchenko, Natalia I. Kozhukhova

    Autonomous navigation and mooring in confined waters require a navigation solution that remains reliable when individual sensing channels are delayed, unavailable, or environmentally degraded. A risk- and integrity-aware architecture was developed for joint processing of RTK-GNSS, inertial and heading measurements, short-range radar, LiDAR, camera, AIS, ultrasonic ranging, propulsion feedback, environmental, and mooring-line tension data. Asynchronous time alignment is combined with sensor-quality assessment, innovation-based fault detection and isolation, covariance adaptation, active-set reconfiguration, protection-level monitoring, and risk-dependent allocation of authority between automation and the operator. The system was evaluated during a five-day campaign comprising 40 runs, four operational phases, 480 synchronized evaluation epochs, and 16 controlled single-sensor or combined sensor-degradation events. Under nominal conditions, horizontal-position and heading RMSE were 0.043 m and 0.176°, respectively. All 64 fault-active diagnostic records were identified; mean event-log detection and controlled-recovery latencies were 3.17 s and 6.34 s. Horizontal protection-level coverage was 99.3% for single-fault epochs and 100% for combined-fault epochs. One combined-fault docking run contained five consecutive aborted decision epochs, while no unsafe-autonomy event was recorded. The measurements therefore indicate bounded degradation of the navigation solution and conservative transfer of authority when sensing integrity decreases. Because all injected-fault runs were acquired under adverse weather whereas nominal runs were acquired under calm or moderate conditions, the condition-class RMSE differences reported below are descriptive and must not be interpreted as isolated causal effects of sensor faults.


  • Open Access

    Field-Validated Probabilistic Digital Twin of a Shipboard Microgrid for Reliability-Oriented Operation: Applications to Hybrid and Unmanned Vessels

    by Sergey I. Kondratyev, Evgeniy V. Khekert, Nikita V. Martyushev, Boris V. Malozyomov, Vadim S. Tynchenko, Viktor A. Kukartsev, Tatyana Aleksandrovna Panfilova, Natalya Vladimirovna Fedorova, Marina I. Kozhukhova

    The transition toward unmanned and hybrid vessels increases the requirements for diagnosability and continuity of power supply to critical consumers under physical and information-layer faults. The aim of this study is to develop a probabilistic digital twin of a shipboard microgrid that combines nonlinear state estimation, Bayesian mode inference, adaptive measurement-quality accounting, and risk-aware power reconfiguration. Field validation was performed using a long-term operational measurement program. The database comprises 12 classes of operating and fault events, with 30 field records per class, yielding 360 thirty-minute records, 180 h of observations, and 162,360 time samples at a 4 s sampling interval. Three diagnostic and control methods were applied to the same field records, producing 1080 paired algorithmic evaluations. Relative to the deterministic digital twin, the proposed method reduced voltage RMSE by 37.3%, SOC RMSE by 32.7%, and power RMSE by 30.1%, while reducing ENS by 13.3%. Mean fault-detection delay did not differ significantly from that of the deterministic approach; however, the missed-detection rate decreased from 12.7% to 7.3%. Compared with threshold-based protection, detection latency and recovery time were reduced by 25.7% and 30.8%, respectively. The field evidence therefore supports the proposed architecture as a supervisory state-estimation, diagnosis, and energy-reconfiguration layer. Because the field records originate from one operator and predominantly conventional tanker vessels, transfer to hybrid and unmanned platforms requires prospective onboard validation on the target vessel classes.

  • Open Access

    Reliability-Based Time-Reserve Assessment of Bulk Carrier Accidents Triggered by Solid Bulk Cargo Liquefaction and Dynamic Separation

    by Sergey S. Kubrin, Sergey I. Kondratyev, Evgeniy V. Khekert, Viktor V. Kondratiev, Natalia Nikolaevna Bryukhanova, Vitaliy A. Gladkikh, Boris V. Malozyomov, Nikita V. Martyushev, Roman V. Klyuev, Antonina I. Karlina

    Liquefaction and dynamic separation of moisture-sensitive solid bulk cargoes may remain latent for much of a voyage and then manifest as a sustained heel, leaving a comparatively short interval for emergency action. This study develops an exploratory reliability-based analysis of accident chronology using a source-traceable registry of 35 casualties and incidents. Eighteen cases provided post-heel information suitable for the principal emergency time reserve analysis; the observations comprised exact, approximate, reconstructed, interval-censored, and right-censored times. Descriptive statistics calculated from the selected central values and censoring bounds yielded a mean emergency time reserve TR of 200.99 min, a median of 192.20 min, and a range of 67.50–335.10 min. In likelihood-based fitting that retained censoring, the Weibull model achieved the lowest AIC (212.51) and BIC (215.18), with Kolmogorov–Smirnov D = 0.097 (p = 0.989). The fitted lower-tail quantiles were Q10 = 105.40 min and Q25 = 147.99 min, substantially shorter than the descriptive mean. Robustness was examined using nonparametric estimators, Akaike-weighted model averaging, source-confidence weighting, leave-one-out analysis, and alternative interval assumptions. The contribution is a reproducible framework for converting heterogeneous casualty narratives into uncertainty-qualified lower-tail time-reserve evidence and non-prescriptive bridge–team decision support. The framework is not a physical stability model and cannot replace ship-specific GM/GZ calculations, approved loading and stability information, or the master’s judgement.

  • Open Access

    Improving the Reliability of the Protection of Electric Transport Networks

    by Boris V. Malozyomov, Evgeniy V. Khekert, Nikita V. Martyushev, Vladimir Yu. Konyukhov, Valentina V. Chetverikova, Vladimir I. Golik, Vadim S. Tynchenko

    In traction networks of mining enterprises, ensuring selective and sensitive protection remains an urgent task, especially in conditions of frequent starts of electric transport and possible cases of short circuits, lack of reliable grounding and increased spreading resistance. Standard methods—maximum current protection (MCP) and differential current protection (DCP)—demonstrate limited efficiency at operating currents less than 800 A, which is typical for remote sections of the contact network. The objective of this study is to develop and experimentally verify a method for adjusting the parameters of current and impulse protection, ensuring reliable shutdown of accidents at low values of short-circuit current without the need to replace equipment. The proposed method is based on transient processes modeled using differential equations and the introduction of a dynamic sensitivity coefficient reflecting the dependence of the setting on the circuit time constant. Universal response characteristics were constructed in normalized coordinates for BAT-49 and VAB-43 switches and RDSh-I and RDSh-II relays. Experiments have confirmed that the application of the method allows for reducing the tripping threshold to 600–650 A, increasing the selectivity of protection to 95% and reducing the probability of false tripping by more than two times compared to MCP/DCP. The response time remained within 35–45 ms, which meets the requirements for high-speed systems. The developed method is adapted to different network sections using the relative coordinates of the energy consumer on the supply section of the traction network and does not require complex digital equipment. This makes it especially effective in field conditions, where it is impossible to upgrade the protection using intelligent adaptive systems.


  • Open Access

    Battery Charging Simulation of a Passenger Electric Vehicle from a Traction Voltage Inverter with an Integrated Charger

    by Evgeniy V. Khekert, Boris V. Malozyomov, Roman V. Klyuev, Nikita V. Martyushev, Vladimir Yu. Konyukhov, Vladislav V. Kukartsev, Oleslav A. Antamoshkin, Ilya S. Remezov

    This paper presents the results of the mathematical modeling and experimental studies of charging a traction lithium-ion battery of a passenger electric car using an integrated charger based on a traction voltage inverter. An original three-stage charging algorithm (3PT/PN) has been developed and implemented, which provides a sequential decrease in the charging current when the specified voltage and temperature levels of the battery module are reached. As part of this study, a comprehensive mathematical model has been created that takes into account the features of the power circuit, control algorithms, thermal effects and characteristics of the storage battery. The model has been successfully verified based on the experimental data obtained when charging the battery module in real conditions. The maximum error of voltage modeling has been 0.71%; that of current has not exceeded 1%. The experiments show the achievement of a realized capacity of 8.9 Ah and an integral efficiency of 85.5%, while the temperature regime remains within safe limits. The proposed approach provides a high charge rate, stability of the thermal state of the battery and a long service life. The results can be used to optimize the charging infrastructure of electric vehicles and to develop intelligent battery module management systems.


  • Analysis of The ship's automatic identification system information and models for constructing spatio-temporal algorithms for predicting vessel traffic

    by В.в. Астреин, С.и. Кондратьев, А.л. Боран-Кешишьян, Л.б. Астреина, В.и. Филатов

    Точность решения задач безопасности судовождения определяется двумя факторами: точностью исходных данных и степенью адекватности используемых математических моделей. Судовая система автоматической идентификации (АИС) имеет явные преимущества перед РЛС/САРП по точности данных для прогнозирования движения судов. Эти данные могут быть использованы при построении Систем поддержки принятия решений в Морских автономных судах (МАНС) для отслеживания маршрута движения и прогнозирования столкновений в режиме реального времени. Данные АИС позволяют описать движение вкоординатном форме, в виде одномерного временного ряда обсерваций места судна , выявить тенденции изменения динамики движения (рост, снижение или постоянство) и наблюдать череду периодов движения судна с разной динамикой, когда стационарные временные ряды переходят в нестационарные и наоборот. Смена режимов движения сопровождается разладкой временных рядов, т.е. обнаружения изменения свойств наблюдаемого параметрического ряда, происходящего в неизвестный заранее момент времени. Определение момента разладки из-за инерционности судна довольно сложная задача. Для ее решения может быть использован метод нахождения отношения правдоподобия порогового значения некоторого решающего правила после пересечения соответствующих значений временных рядов . Универсального метода прогнозирования временных рядов не существует, каждый метод находит свое применение для разных видов движения и разных типов временных рядов. Временные ряды могут быть использованы в различных моделях: физических, на основе машинного обучения и гибридных моделях. Сегодня не существует реализации той или иной модели в режиме реального времени. Эта проблема может быть решена путем разработки гибридных моделей, которые представляют собой комбинацию пространственно-временных алгоритмов прогнозирования движения судов в море для получения лучших результатов оценки движения судна. The accuracy of solving navigation safety problems is determined by two factors: the accuracy of the initial data and the degree of adequacy of the mathematical models used. The ship's automatic identification system (AIS) has clear advantages over radar/ARPA in terms of data accuracy for predicting vessel movements. This data can be used to build Decision Support Systems for Maritime Autonomous Vessels (MANS) to track traffic routes and predict collisions in real time. AIS data makes it possible to describe movement in coordinate form, in the form of a one-dimensional time series of observations of the vessel’s location (x, y), identify trends in changes in movement dynamics (increase, decrease or constancy) and observe a series of periods of ship movement with different dynamics, when stationary time series change to non-stationary and vice versa. A change in movement modes is accompanied by a disorder in the time series, i.e. detection of changes in the properties of the observed parametric series occurring at an unknown point in time. Determining the moment of disorder due to the inertia of the vessel is a rather difficult task. To solve it, the method of finding the likelihood ratio of the threshold value of some decision rule after crossing the corresponding values of the time series (x,y) can be used. There is no universal method for forecasting time series; each method finds its application for different types of movement and different types of time series. Time series (x,y) can be used in various models: physical, machine learning and hybrid models. Today there is no implementation of this or that model in real time. This problem can be solved by developing hybrid models, which are a combination of spatio-temporal algorithms for predicting the movement of vessels at sea to obtain better vessel movement estimation results.


  • Dynamics of vibration effects on a grinding machine in a floating workshop, taking into account sea waves

    by Е.а. Владецкая, С.м. Братан, А.о. Харченко, Е.в. Хекерт

  • Evaluation of the diesel engine’s cylinder unit’s elements functional reliability based on statistical research

    by Б.п. Башуров, А.а. Иванченкο, В.в. Шарик

    Показана важность задачи накοпление инфοрмации пο οтказам элементοв и узлοв современных судовы дизелей в проблеме повышения их функциοнальнοй надежнοсти (ФН) на заключительнοй стадии жизненнοгο цикла (ЖЦ) – этапе техническοй эксплуатации (ТЭ). В настоящей работе приведен комплекс статистических исследοваний οтказοв элементοв цилиндрο-пοршневοй группы современных судοвых дизелей серийных нефтеналивных танкерοв. Был прοизведён сбор информации и анализ οтказοв и причин их вызывающих в прοцессе эксплуатации. Соответственно рассмοтрены урοвни и причинно – следственные связи функциοнальнοй надёжнοсти элементοв цилиндрο-пοршневοй группы главных двигателей судοвοй дизельнοй устанοвки. Предлοжены пοказатели статистическοгο исследοвания для включения в инфοрмациοннο-статистический банк данных для οценки функциοнальнοй надёжнοсти на заключительнοм этапе «жизненнοгο цикла», техническοй эксплуатации. Систематизация и включение информации об отказах ЦПГ судовых дизелей в статистический банк данных по группам транспортных судов, позволяет судоходным компаниям прогнозировать состояния дизелей и осуществить переход на техническое обслуживание дизельных двигателей по фактическому состоянию на заключительном этапе «жизненного цикла». The importance of the task of accumulating information on failures of elements and assemblies of modern ship diesel engines in the problem of increasing their functional reliability (FN) at the final stage of the life cycle (LC) - the stage of technical operation (TE) is shown. Statistical researches of oil tankers main diesel engines cylinder units’ elements failures are revealed in the article. Analysis of malfunctions and its causes while operations are described. Levels of functional reliability of main diesel engines cylinder units’ elements are reviewed. Indexes of statistical research are offered as evaluation signs of functional reliability and same have to be included into info-statistical database which are corresponds to final “lifetime” stage of technical operation. The systematization and inclusion of information on the failures of the CPG of marine diesel engines into the statistical databank by groups of transport vessels allows shipping companies to predict the condition of diesel engines and to make the transition to maintenance of diesel engines based on the actual state at the final stage of the "life cycle".

  • Analysis of vibration resistance of machining technological equipment of a floating workshop in shipbuilding

    by О.в. Владецкий, Е.в. Хекерт, Е.а. Владецкая, А.о. Харченко

    В статье рассмотрены результаты исследований в направлении совершенствования станочного оборудования для высокоточной обработки деталей в условиях плавучих мастерских путем повышения виброустойчивости технологической системы и снижения вредных воздействий от внешней среды (морского волнения) и соседнего работающего оборудования. Проанализированы традиционные виброизолирующие опоры современных станков, которые невозможно использовать на плавучих мастерских по причине потери ими функционирования в условиях качки плавучего основания и горизонтальных смещений под ее воздействием. Разные способы установки обеспечивают различную степень чувствительности станка к колебаниям основания и возмущениям, действующим в станке. Целью работы является изыскание путей повышения эффективности систем виброизоляции станочного оборудования в условиях плавучей мастерской для обеспечения качества обрабатываемых деталей. Задачей является анализ традиционных виброизолирующих устройств и разработка модели и алгоритма поиска новых структурных вариантов виброизолирующих устройств для уменьшения влияния вибрационных воздействий от внешней среды и внутренних факторов на качество обработки. Выявлено, что на этапах анализа и синтеза на уровне структурно-компоновочной оптимизации виброизолирующих устройств возможно по укрупненным качественным показателям получение рациональных структурных вариантов для шлифовальных станков плавучей мастерской. Установлено, что путем параметрического синтеза и проведения дополнительных теоретических и практических исследований реальных конструкций виброизолирующих устройств, возможно создание новых конструкций виброизолирующего устройства механообрабатывающего технологического оборудования. The article discusses the results of research in the direction of improving machine tool equipment for high-precision machining of parts in floating workshops by increasing the vibration resistance of the technological system and reducing the harmful effects of the environment (sea waves) and neighboring operating equipment. The traditional vibration-isolating supports of modern machines, which cannot be used in floating workshops, due to their loss of functioning under the conditions of the floating base swinging and horizontal displacements under its influence, are analyzed. Different installation methods provide different degrees of machine sensitivity to base vibrations and disturbances in the machine. The aim of the work is to find ways to improve the efficiency of vibration isolation systems for machine tool equipment in a floating workshop to ensure the quality of processed parts. The task is to analyze traditional vibration damping devices and develop a model and an algorithm for searching for new structural variants of vibration damping devices to reduce the influence of vibration effects from the external environment and internal factors on the quality of processing. It was revealed that at the stages of analysis and synthesis at the level of structural and layout optimization of vibration isolation devices, it is possible to obtain rational structural options for grinding machines of a floating workshop based on enlarged quality indicators. It has been established that by means of parametric synthesis and additional theoretical and practical research of real designs of vibration-isolating devices, it is possible to create new designs of vibration-isolating devices of mechanical processing equipment.