Mohammed Bouzidi
Research Subjects
Mohammed Bouzidi has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Abdelfatah Nasri
University of Bechar, SGRE laboratory, B.P 417 BECHAR (08000), Algeria
3 shared publications - Messaoud Hamouda
University of Adrar
3 shared publications - Abdelfatah Nasri
Department of Electrical Engineering, Tahri Mohamed University of Bechar, Bechar 8000, Algeria
2 shared publications - Mohamed Ben Rahmoune
Univ Tamanghasset, Dept Sci & Technol, Tamanrasset, Algeria
2 shared publications - AbdelKader El Moumen
Faculty of Science and Technology, University of Tamenghasset, Algeria
1 shared publication Abdelfatah Nasri
Univ Tahri Mohame Bechar, Lab Smart Grid & Renewable Energy SGRE, Bechar, Algeria
1 shared publication
Latest Publications
- Open Access
- 1 September 2025
- Published by AIP Publishing in AIP Advances
- Vol. 15 (9)
Optimizing photovoltaic collector performance: A comprehensive study on the thermal performance of nanofluids
The integration of nanofluids into solar thermal systems offers considerable potential for improving heat transfer efficiency. However, the interaction between the properties of the nanoparticles, the operating parameters, and the long-term stability has not yet been sufficiently researched. This study investigates the impact of various nanofluids on the efficiency of photovoltaic–thermal (PV/T) systems, with a focus on the thermal conductivity and heat storage properties of these nanofluids. A heat transfer model, formulated as a system of linear partial differential equations, is implemented, and analytical solutions for the temperatures and velocities are obtained using the continuous Laplace transform. The four nanofluids are investigated to analyze the enhancement of heat transfer by these nanofluids. The results show that the most efficient heat transfer occurs with the Ag–H2O and Cu–H2O nanofluids. The reasons for this lie in the significantly higher thermal conductivity of Ag and Cu nanoparticles compared to Al2O3 and TiO2 particles. However, the cost and stability are critical practical aspects that indicate that the Cu–water nanofluid is the most likely candidate for industrial use. This study also demonstrates the importance of nanoparticle concentration in optimizing performance over the lifetime of the nanofluid. This study provides valuable insights into the efficient development of solar collectors and recommends exploring hybrid nanofluid formulations and innovative predictive modeling approaches for future research.
- 1 September 2025
- Published by AIP Publishing in AIP Advances
- Vol. 15 (9)
Open AccessOptimizing photovoltaic collector performance: A comprehensive study on the thermal performance of nanofluids
The integration of nanofluids into solar thermal systems offers considerable potential for improving heat transfer efficiency. However, the interaction between the properties of the nanoparticles, the operating parameters, and the long-term stability has not yet been sufficiently researched. This study investigates the impact of various nanofluids on the efficiency of photovoltaic–thermal (PV/T) systems, with a focus on the thermal conductivity and heat storage properties of these nanofluids. A heat transfer model, formulated as a system of linear partial differential equations, is implemented, and analytical solutions for the temperatures and velocities are obtained using the continuous Laplace transform. The four nanofluids are investigated to analyze the enhancement of heat transfer by these nanofluids. The results show that the most efficient heat transfer occurs with the Ag–H2O and Cu–H2O nanofluids. The reasons for this lie in the significantly higher thermal conductivity of Ag and Cu nanoparticles compared to Al2O3 and TiO2 particles. However, the cost and stability are critical practical aspects that indicate that the Cu–water nanofluid is the most likely candidate for industrial use. This study also demonstrates the importance of nanoparticle concentration in optimizing performance over the lifetime of the nanofluid. This study provides valuable insights into the efficient development of solar collectors and recommends exploring hybrid nanofluid formulations and innovative predictive modeling approaches for future research.
- Open Access
- 11 July 2025
- Published by Polskie Towarzystwo Diagnostyki Technicznej in Diagnostyka
- p. 1-7
Laplace transform for fractional differential equations in viscoelastic electrical systems
This paper studies the use of the Laplace transform as a key tool for solving fractional differential equations which involve non-integer derivatives and are used to model various physical phenomena such as viscoelastic materials and control systems Fractional differential equations pose...
- 11 July 2025
- Published by Polskie Towarzystwo Diagnostyki Technicznej in Diagnostyka
- p. 1-7
Open AccessLaplace transform for fractional differential equations in viscoelastic electrical systems
This paper studies the use of the Laplace transform as a key tool for solving fractional differential equations which involve non-integer derivatives and are used to model various physical phenomena such as viscoelastic materials and control systems Fractional differential equations pose...
- Open Access
- 11 September 2024
- Published by IAES Indonesia Section in Indonesian Journal of Electrical Engineering and Informatics (IJEEI)
- Vol. 12 (3) , 543-557
Regulation of Active and Reactive Powers in Doubly-Fed Induction Generators Utilizing Proportional-Integral and Artificial Neural Network Controllers
Regulation of Active and Reactive Powers in Doubly-Fed Induction Generators Utilizing Proportional-Integral and Artificial Neural Network Controllers
- 11 September 2024
- Published by IAES Indonesia Section in Indonesian Journal of Electrical Engineering and Informatics (IJEEI)
- Vol. 12 (3) , 543-557
Open AccessRegulation of Active and Reactive Powers in Doubly-Fed Induction Generators Utilizing Proportional-Integral and Artificial Neural Network Controllers
Regulation of Active and Reactive Powers in Doubly-Fed Induction Generators Utilizing Proportional-Integral and Artificial Neural Network Controllers
- Open Access
- 1 September 2024
- Published by Institute of Advanced Engineering and Science in International Journal of Power Electronics and Drive Systems (IJPEDS)
- Vol. 15 (3) , 1959-1967
Enhancing of a wind power system control using intelligent artificial control and multilayer inverter
The improvement of overall power quality and optimal control of reactive and active power are issues that have attracted many researchers. The harmonic is considered a main stressful source for energy quality. This paper proposed the ability of artificial intelligence at controlling the active and reactive power and to reduce torque ripple and current harmonics thus improve energy quality and the stability of system, that by using the artificial intelligence controller and a neural network based space vector modulation with two levels inverter (NSVM-2L). These inverter hold the offer improved efficiency and have on account of their capability of high voltage operation compared with traditional inverters as reducing the harmonic. These results showed that the fuzzy logic controller's dynamic performance is very superior to that of the PID controller of DFIG. The fuzzy controller works well for helping us to minimize the rate of harmonic distortion of absorbed currents and for correctly adjusting active and reactive power and its stability of wind turbine compared to PID controller.
- 1 September 2024
- Published by Institute of Advanced Engineering and Science in International Journal of Power Electronics and Drive Systems (IJPEDS)
- Vol. 15 (3) , 1959-1967
Open AccessEnhancing of a wind power system control using intelligent artificial control and multilayer inverter
The improvement of overall power quality and optimal control of reactive and active power are issues that have attracted many researchers. The harmonic is considered a main stressful source for energy quality. This paper proposed the ability of artificial intelligence at controlling the active and reactive power and to reduce torque ripple and current harmonics thus improve energy quality and the stability of system, that by using the artificial intelligence controller and a neural network based space vector modulation with two levels inverter (NSVM-2L). These inverter hold the offer improved efficiency and have on account of their capability of high voltage operation compared with traditional inverters as reducing the harmonic. These results showed that the fuzzy logic controller's dynamic performance is very superior to that of the PID controller of DFIG. The fuzzy controller works well for helping us to minimize the rate of harmonic distortion of absorbed currents and for correctly adjusting active and reactive power and its stability of wind turbine compared to PID controller.
- 24 July 2024
- Published by Wydawnictwo SIGMA-NOT, sp. z.o.o. in PRZEGLĄD ELEKTROTECHNICZNY
- Vol. 1 (7) , 137-141
The impact of Adaptive Fuzzy Logic on the regulation of induction motor speed
Wydawnictwo SIGMA-NOT wydaje czasopisma fachowe informujące swoich czytelników o najnowszych osiągnięciach naukowych i nowoczesnych rozwiązaniach technicznych w Polsce i na świecie, popularyzuje problemy techniczne oraz poszerza wiedzę i kulturę techniczną.
- 24 July 2024
- Published by Wydawnictwo SIGMA-NOT, sp. z.o.o. in PRZEGLĄD ELEKTROTECHNICZNY
- Vol. 1 (7) , 137-141
The impact of Adaptive Fuzzy Logic on the regulation of induction motor speed
Wydawnictwo SIGMA-NOT wydaje czasopisma fachowe informujące swoich czytelników o najnowszych osiągnięciach naukowych i nowoczesnych rozwiązaniach technicznych w Polsce i na świecie, popularyzuje problemy techniczne oraz poszerza wiedzę i kulturę techniczną.
- Open Access
- 1 July 2024
- Published by Brazilian Journals in STUDIES IN ENGINEERING AND EXACT SCIENCES
- Vol. 5 (2) , e9951
Confidence ellipses for simple regression parameters with Quasi-associated random errors
The work presented in this paper introduces a novel methodology for constructing confidence regions for linear regression parameters using ellipses, particularly in cases where the random errors are quasi-associated. Linear regression is widely employed in statistical analysis to predict a dependent variable using one or more independent variables. Traditionally, it is assumed that random errors in regression models follow a normal distribution. However, this assumption may not hold in many practical applications where errors exhibit dependencies. Thus, this study focuses on quasi-associated random variables, which include both positively and negatively associated variables.We derive exponential inequalities that allow the construction of confidence ellipses for least squares estimates of model parameters. This approach is applied to a Keynesian consumption function, which models the relationship between consumption and national income. Using data on monthly per capita income in Africa over 12 years, we demonstrate the effectiveness of our method in estimating regression parameters when the random errors are quasi-associated. The findings show that this technique can improve the accuracy of statistical models used in fields such as economics and engineering, especially in cases where the traditional assumptions of regression analysis are not met.
- 1 July 2024
- Published by Brazilian Journals in STUDIES IN ENGINEERING AND EXACT SCIENCES
- Vol. 5 (2) , e9951
Open AccessConfidence ellipses for simple regression parameters with Quasi-associated random errors
The work presented in this paper introduces a novel methodology for constructing confidence regions for linear regression parameters using ellipses, particularly in cases where the random errors are quasi-associated. Linear regression is widely employed in statistical analysis to predict a dependent variable using one or more independent variables. Traditionally, it is assumed that random errors in regression models follow a normal distribution. However, this assumption may not hold in many practical applications where errors exhibit dependencies. Thus, this study focuses on quasi-associated random variables, which include both positively and negatively associated variables.We derive exponential inequalities that allow the construction of confidence ellipses for least squares estimates of model parameters. This approach is applied to a Keynesian consumption function, which models the relationship between consumption and national income. Using data on monthly per capita income in Africa over 12 years, we demonstrate the effectiveness of our method in estimating regression parameters when the random errors are quasi-associated. The findings show that this technique can improve the accuracy of statistical models used in fields such as economics and engineering, especially in cases where the traditional assumptions of regression analysis are not met.
- Open Access
- 1 July 2024
- Published by Brazilian Journals in STUDIES IN ENGINEERING AND EXACT SCIENCES
- Vol. 5 (2) , e6742
Thermal analysis and performance enhancement of solar ponds in hot regions
This study examines solar pond behavior in Algeria's Adrar region, focusing on the stability, robustness, and convergence of the heat equation solution with a source. The finite volume method was used to estimate the heat conduction equation for the solar pond system, comparing temperature profiles with and without reflectors. Results revealed a clear thermal gradient between pond layers. The lower layer (HSZ) consistently recorded the highest temperatures and stored heat throughout the day, while the upper layer (UCZ) maintained lower temperatures, insulating lower layers and reducing heat loss. The middle layer (NCZ) effectively acted as an insulating zone, maintaining a thermal gradient between upper and lower layers. Maximum temperatures and stored heat were recorded in the afternoon, indicating the pond's ability to retain heat for extended periods. This study opens avenues for further research to improve solar pond efficiency in desert areas like Adrar, where solar energy potential is significant. The study's importance lies in providing sustainable energy generation solutions for remote and desert areas, contributing to sustainable development goals and reducing dependence on conventional energy sources. It offers valuable insights into solar pond potential in desert regions and paves the way for renewable energy innovations, promising a more sustainable future in energy production.
- 1 July 2024
- Published by Brazilian Journals in STUDIES IN ENGINEERING AND EXACT SCIENCES
- Vol. 5 (2) , e6742
Open AccessThermal analysis and performance enhancement of solar ponds in hot regions
This study examines solar pond behavior in Algeria's Adrar region, focusing on the stability, robustness, and convergence of the heat equation solution with a source. The finite volume method was used to estimate the heat conduction equation for the solar pond system, comparing temperature profiles with and without reflectors. Results revealed a clear thermal gradient between pond layers. The lower layer (HSZ) consistently recorded the highest temperatures and stored heat throughout the day, while the upper layer (UCZ) maintained lower temperatures, insulating lower layers and reducing heat loss. The middle layer (NCZ) effectively acted as an insulating zone, maintaining a thermal gradient between upper and lower layers. Maximum temperatures and stored heat were recorded in the afternoon, indicating the pond's ability to retain heat for extended periods. This study opens avenues for further research to improve solar pond efficiency in desert areas like Adrar, where solar energy potential is significant. The study's importance lies in providing sustainable energy generation solutions for remote and desert areas, contributing to sustainable development goals and reducing dependence on conventional energy sources. It offers valuable insights into solar pond potential in desert regions and paves the way for renewable energy innovations, promising a more sustainable future in energy production.
- Open Access
- 28 May 2024
- Published by Polskie Towarzystwo Diagnostyki Technicznej in Diagnostyka
- Vol. 25 (2) , 1-8
Extracting electrical parameters of solar cells using Lambert function
Photovoltaic cells are intricate systems that transform solar energy into electrical power. Certain internal parameters, such as diode saturation current, conversion resistance, and series resistance, significantly influence the performance of electrical components. Frequently, manufacturers do...
- 28 May 2024
- Published by Polskie Towarzystwo Diagnostyki Technicznej in Diagnostyka
- Vol. 25 (2) , 1-8
Open AccessExtracting electrical parameters of solar cells using Lambert function
Photovoltaic cells are intricate systems that transform solar energy into electrical power. Certain internal parameters, such as diode saturation current, conversion resistance, and series resistance, significantly influence the performance of electrical components. Frequently, manufacturers do...