RNRihachiro Nakashima

Rihachiro Nakashima

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Rihachiro Nakashima has a total of 12 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Acoustically driven MEMS mirror enhanced by a parallel Helmholtz resonator array

    by Masahiro Fukuta, Rihachiro Nakashima, Tetsuo Kan, Hidetoshi Takahashi

    In this study, we propose a method to enhance the actuation performance of an acoustically driven microelectromechanical systems (MEMSs) mirror that incorporates a parallel Helmholtz resonator (HR) array. Acoustic actuation enables a simple and noncontact device structure without on-chip actuating elements, which is particularly advantageous for mirror-based optical sensing devices that integrate surface-functional structures. However, the inherently limited energy of acoustic waves restricts the achievable vibration amplitude. Here, we propose inserting an HR array between the MEMS mirror and the acoustic source. The HR array selectively amplifies acoustic waves near its resonant frequency, and the acoustic actuation of the mirror is enhanced when this frequency matches its mechanical resonant frequency. A Si piezoresistive cantilever-type mirror was fabricated, and HR arrays were 3D-printed. Among configurations containing from one to six HRs, the six-HR array provided the highest amplification, nearly doubling the amplitude compared that obtained without using an HR. This approach offers a compact solution for large-amplitude MEMS actuation with potential applications in optical sensing and imaging.


  • Piezoresistive cantilever for in-plane force measurement using liquid-immersion laser sidewall doping

    by Rihachiro Nakashima, Yuki Okamoto, Yusuke Takei, Tetsuo Kan, Hidetoshi Takahashi

    Piezoresistive MEMS multi-axis force sensors are widely utilized owing to their high sensitivity and compact form factor. In multi-axis sensing applications, it is essential to measure forces along each axis simultaneously while minimizing crosstalk. To achieve this, forming piezoresistive layers not only on the device surface for out-of-plane force detection but also on the sidewalls for in-plane force detection is highly effective. However, patterning piezoresistive layers on sidewalls remains technically challenging using conventional lithography-based MEMS fabrication processes, thereby increasing fabrication complexity and limiting design flexibility. In contrast, laser doping enables localized and selective formation of piezoresistive layers, offering a promising approach to overcome these limitations. In this study, we propose a piezoresistive cantilever for in-plane force measurement fabricated using liquid-immersion laser sidewall doping. The proposed process consists of two main steps: device structure formation through laser processing and sidewall piezoresistive layer formation via liquid-immersion laser doping. This approach enables direct and selective patterning of piezoresistive layers on device sidewalls. To verify the effectiveness of the proposed method, the electrical and mechanical characteristics of the fabricated sensor were evaluated. The piezoresistive layer exhibited a gauge factor exceeding 13, demonstrating sufficient performance for practical sensing applications.


  • Open Access

    Direct phase-compensation method of piezoelectric resonant MEMS scanners through control of driving signal phase and duty cycle

    by Yuki Okamoto, Rihachiro Nakashima, Ryo Oda, Kei Ohara, Soya Sato, Sucheta Gorwadkar, Hironao Okada, Yusuke Takei

    Piezoelectric actuators are integral to microelectromechanical systems (MEMS) scanners, but phase errors can impair laser scanning accuracy. This study addresses these errors through direct compensation methods, eliminating the need for embedded phase-detection sensors, which complicate fabrication and design. Specifically, we explored the influence of driving-signal modulation on the phase shift between the applied voltage and resulting scanning angle. Our experiments reveal that adjusting the phase difference yields the best compensation, effectively reducing phase error while maintaining scanning performance. These results validate a sensorless approach to improve laser scanning precision in piezoelectric MEMS scanners without added fabrication complexity.


  • Laser-Induced Graphene-Based Pressure Sensor With Corrugated Polyimide Diaphragm

    by Ryo Oda, Rihachiro Nakashima, Hidetoshi Takahashi

    Until now, various types of pressure sensors, including piezoresistive and capacitive types, have been developed using the technology of microelectromechanical systems. However, many of these sensors require complex fabrication processes, making it challenging to form 3D shapes. In contrast, laser-induced graphene (LIG) shows promise for use in various physical sensors due to its high sensitivity as a piezoresistive material and its simple fabrication process. Polyimide substrates, commonly used for LIG formation, can be easily grooved and cut by UV lasers, allowing for the fabrication of 3D shapes. In this study, we propose a two-gauge corrugated-type pressure sensor with LIG strain gauges on both the top and back sides of a polyimide substrate featuring a corrugated structure. The fabrication process involves using a UV laser to fabricate the corrugated structure and a CO2 laser to form the LIG strain gauges. This simple process produced a sensor with dimensions of 10 mm in length, 15 mm in width, and a total thickness of 6 mm. The corrugated sensor deformed 1.8 times more under pressure and demonstrated three times greater sensitivity than the membrane-type polyimide sensor. This approach is effective for low volume production of a large variety of sensors in laboratories because it enables simple design and fabrication using only two types of lasers.


  • Transparent glass force plate with CrN strain gauges featuring a notch structure

    by Ryo Oda, Yuki Okamoto, Rihachiro Nakashima, Yusuke Takei, Hidetoshi Takahashi

    Microforce plate is a powerful tool as force sensors in the field of microelectromechanical systems (MEMS). These force plates can be used to quantitatively measure the minute insects’ ground reaction forces and microdroplets’ collision forces. During such measurements, there is often a demand specification for observing the interface between the object and the plate from the backside. However, transparent materials were not compatible with traditional MEMS force plate fabrication processes. Here, we propose a fabrication process for a transparent glass force plate by forming a notch structure on a glass substrate using chromium nitride (CrN) as a strain gauge. The force plate was designed as a 10 × 10 × 0.1 mm plate supported by beams on all four sides. The plate shape and groove formation were easily realized by applying a laser machining process to glass cutting. The force applied to the plate was measured using CrN strain gauges placed on a support beam. The fabricated force plate achieved a force resolution of less than 1 mN in the range of 100 mN. Additionally, the positional error across the entire plate was approximately ±10%. The proposed glass force plate is expected to be utilized in small-force measurements such as droplet collision observations, which require transparent plates for optical observation.

  • Open Access

    3.8 × 3.8 mm2 compact piezoelectric resonant MEMS scanner using fork-shaped and ring-shaped actuators

    by Yuki Okamoto, Rihachiro Nakashima, Ryo Oda, Sucheta Gorwadkar, Yusuke Takei, Hironao Okada

    This study presents a compact 3.8 × 3.8 mm2 resonant piezoelectric micro-electro-mechanical systems scanner featuring a 1.0 mm mirror and double-coupling frames. It employs a novel mechanical coupling of two Pb(Zr,Ti)O3 piezoelectric actuators–fork-shaped and ring-shaped. This dual-actuator configuration enhances the efficiency of actuator area usage per die and significantly improves the resonant frequency through their mechanical coupling. Additionally, the design strategy effectively reduces mechanical stress by operating the scanning frequency above those of other modes. The resonant frequency achieved by the proposed scanner is 27.09 kHz, with an optical scan angle of 40∘, utilizing a unipolar driving voltage of 25.2 V.


  • Open Access

    Two-Axis Electromagnetic Scanner Using an Asymmetric Frame on a One-Axis Lateral Magnetic Field

    by Yuki Okamoto, Rihachiro Nakashima, Ryo Oda, Thanh-Vinh Nguyen, Yusuke Takei, Masaaki Ichiki, Hironao Okada

    Conventional electromagnetic microelectromechanical system scanners require a biaxial (two-axis) external magnetic field to obtain a biaxial torque, which increases the number of bulky external permanent magnets and the packaging size caused by 45 $^{\circ}$ -orientated placement of permanent magnets. Thus, this study developed a two-axis resonant electromagnetic scanner with an asymmetric gimbal frame that generates two-axis torque via a one-axis lateral external magnetic field. As external permanent magnets can be placed parallel to the device die, the proposed method reduced the packaging size. Two driving forces were generated by two independent electromagnetic actuators placed on both sides of the asymmetric gimbal frame, which converted the unidirectional forces into two-axis torque. As the two driving actuators were independent of the connecting beams, gimbal frame, and mirror and were connected to the thick outer Si handle frame, the temperature increase of torsion beams and the asymmetric gimbal frame, which affects the resonant performance, were reduced. Additionally, as the current paths were not multiturn coil shapes, the paths can be formed with a via-less single metal layer. Also, the drive circuit can be simplified since drive signals for two-axis rotation can be applied to individual actuators. We demonstrated biaxial scanning using the proposed structure with a 4-mm mirror. The optical scanning angle was 4.84 $^{\circ}$ for the 1.308 kHz X-axis scan and 16.1 $^{\circ}$ for the 2.568 kHz Y-axis scan when a current of 300 mA was applied independently to the X-and Y-axes driving actuators. We obtained the large displacement at the resonant frequency using the asymmetric gimbal frame under a lateral magnetic field. 2024-0050


  • Angular Accelerometer with Integrated Liquid Spiral Channel and lig Sensing Element on Polyimide Film

    by Rihachiro Nakashima, Hidetoshi Takahashi

    This paper reports on the fabrication method of an angular accelerometer with integrated liquid spiral channels and laser-induced graphene (LIG) sensing element. The proposed fabrication process forms the LIG sensing element and the spiral grooves via a CO 2 laser and a UV laser, respectively, on a polyimide (PI) film. The liquid-sealed spiral channels are fabricated by filling the grooves with silicone oil and applying parylene deposition. Thus, the fabrication process is quite simple. The prototype sensor was validated for its response to angular acceleration.