Elmehdi Ennajih
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Elmehdi Ennajih has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Ezzitouni Jarmouni
Hassan First University of Settat
6 shared publications - Ilias En-Naoui
Hassan first university
5 shared publications - Ahmed Mouhsen
Hassan first university
3 shared publications - Mohamed Lamhamdi
Hassan first university
3 shared publications - Hakim Allali
Hassan First University of Settat, FST, LAVETE Laboratory
2 shared publications - Hind Tarout
Laboratory of Engineering and Advanced Systems Innovation (LIISA), Faculty of Sciences and Technology, Hassan First University, Settat 26000, Morocco
2 shared publications
Latest Publications
- Open Access
- 24 June 2026
- Published by MDPI AG in World Electric Vehicle Journal
- Vol. 17 (7) , 327
Designing and Evaluating a Neural Network-Based Control Strategy for a PMSM-Driven Electric Vehicle Under Various Driving Cycles
In light of the rapid development of the electric vehicle market, permanent magnet synchronous motors (PMSMs) are becoming essential components of propulsion systems. This is due to their high efficiency, remarkable power density, and ability to deliver high torque over a wide speed range. However, the optimal control of these motors under dynamic conditions remains a major challenge due to system nonlinearities, parameter variations, and external disturbances. Conventional strategies such as field-oriented control (FOC), direct torque control (DTC), and fuzzy logic control (FLC) show variable performance in terms of current quality, robustness, and energy efficiency. To overcome these limitations, this study proposes an intelligent control strategy based on artificial neural networks (ANNs), which ensures efficient operation and high control performance under various operating conditions. This approach leverages the learning capabilities of deep neural networks to improve control accuracy, system stability, and overall energy performance. The results obtained show a significant reduction in the current’s total harmonic distortion (THD) as well as an improvement in the stator’s current quality and the electromagnetic torque’s dynamic behavior compared to conventional methods. This improvement reduces overall losses in the electric drive system, thereby contributing to increased vehicle energy efficiency. As a result, the electric vehicle’s range is extended, and the dynamic performance of the PMSM is optimized. These results confirm the potential of artificial intelligence techniques for developing intelligent, robust, and adaptive control systems designed for modern electric propulsion applications.
- 24 June 2026
- Published by MDPI AG in World Electric Vehicle Journal
- Vol. 17 (7) , 327
Open AccessDesigning and Evaluating a Neural Network-Based Control Strategy for a PMSM-Driven Electric Vehicle Under Various Driving Cycles
In light of the rapid development of the electric vehicle market, permanent magnet synchronous motors (PMSMs) are becoming essential components of propulsion systems. This is due to their high efficiency, remarkable power density, and ability to deliver high torque over a wide speed range. However, the optimal control of these motors under dynamic conditions remains a major challenge due to system nonlinearities, parameter variations, and external disturbances. Conventional strategies such as field-oriented control (FOC), direct torque control (DTC), and fuzzy logic control (FLC) show variable performance in terms of current quality, robustness, and energy efficiency. To overcome these limitations, this study proposes an intelligent control strategy based on artificial neural networks (ANNs), which ensures efficient operation and high control performance under various operating conditions. This approach leverages the learning capabilities of deep neural networks to improve control accuracy, system stability, and overall energy performance. The results obtained show a significant reduction in the current’s total harmonic distortion (THD) as well as an improvement in the stator’s current quality and the electromagnetic torque’s dynamic behavior compared to conventional methods. This improvement reduces overall losses in the electric drive system, thereby contributing to increased vehicle energy efficiency. As a result, the electric vehicle’s range is extended, and the dynamic performance of the PMSM is optimized. These results confirm the potential of artificial intelligence techniques for developing intelligent, robust, and adaptive control systems designed for modern electric propulsion applications.
- Open Access
- 13 October 2025
- Published by MDPI AG in World Electric Vehicle Journal
- Vol. 16 (10) , 577
Optimizing Energy Consumption in Electric Vehicles: A Systematic and Bibliometric Review of Recent Advances
Electric vehicles are key to sustainable mobility, but their limited range remains a major obstacle to widespread adoption. Extending driving distance requires optimizing energy use across subsystems. This study combines bibliometric mapping (2017–2024, Scopus) with a focused qualitative review to structure recent research. Results highlight a strong emphasis on energy efficiency, with China leading due to its market size, industrial base, and supportive policies. Major research directions tied to range extension include energy storage, motion control, thermal regulation, cooperative driving, and grid interaction. Among these, hybrid energy storage systems and motor control stand out for their measurable impact and industrial relevance, while thermal management, regenerative braking, and systemic approaches (V2V and V2G) remain underexplored. Beyond mapping contributions, the study identifies ongoing gaps and calls for integrated strategies that combine electrical, thermal, and mechanical aspects. As EV adoption accelerates and battery demand increases, the findings emphasize the need for battery-aware, multi-objective energy management strategies. This synthesis provides a vital framework to guide future research and support the development of robust, integrated, and industry-ready solutions for optimizing EV energy use and extending driving range.
- 13 October 2025
- Published by MDPI AG in World Electric Vehicle Journal
- Vol. 16 (10) , 577
Open AccessOptimizing Energy Consumption in Electric Vehicles: A Systematic and Bibliometric Review of Recent Advances
Electric vehicles are key to sustainable mobility, but their limited range remains a major obstacle to widespread adoption. Extending driving distance requires optimizing energy use across subsystems. This study combines bibliometric mapping (2017–2024, Scopus) with a focused qualitative review to structure recent research. Results highlight a strong emphasis on energy efficiency, with China leading due to its market size, industrial base, and supportive policies. Major research directions tied to range extension include energy storage, motion control, thermal regulation, cooperative driving, and grid interaction. Among these, hybrid energy storage systems and motor control stand out for their measurable impact and industrial relevance, while thermal management, regenerative braking, and systemic approaches (V2V and V2G) remain underexplored. Beyond mapping contributions, the study identifies ongoing gaps and calls for integrated strategies that combine electrical, thermal, and mechanical aspects. As EV adoption accelerates and battery demand increases, the findings emphasize the need for battery-aware, multi-objective energy management strategies. This synthesis provides a vital framework to guide future research and support the development of robust, integrated, and industry-ready solutions for optimizing EV energy use and extending driving range.
- Open Access
- 1 October 2025
- Published by Institute of Advanced Engineering and Science in Indonesian Journal of Electrical Engineering and Computer Science
- Vol. 40 (1) , 127-136
Implementation of a secure system for calculating and supervising the energy consumption of electrical equipment
With the advent of smart grids and the growing challenges associated with the production and consumption of electrical energy, it is crucial to deploy reliable systems to monitor production and consumption, as well as to improve energy efficiency. To ensure optimal decision-making in energy management and control systems, it is essential to have both efficient measurement systems for data collection and acquisition and secure information exchange. These elements are fundamental to ensuring the smooth operation of energy systems and enabling precise supervision of energy flows, thus contributing to more efficient use of available electrical resources. This article focuses on the implementation of a complete electrical energy calculation and management system for energy consumers. To achieve this, devices such as integrated digital control units and current and voltage sensors are used. The system architecture guarantees precise measurement and calculation of electrical energy and other important parameters, such as power factor in the case of inductive and capacitive loads, which have an effect on reactive energy. The data collected is stored in a secure database.
- 1 October 2025
- Published by Institute of Advanced Engineering and Science in Indonesian Journal of Electrical Engineering and Computer Science
- Vol. 40 (1) , 127-136
Open AccessImplementation of a secure system for calculating and supervising the energy consumption of electrical equipment
With the advent of smart grids and the growing challenges associated with the production and consumption of electrical energy, it is crucial to deploy reliable systems to monitor production and consumption, as well as to improve energy efficiency. To ensure optimal decision-making in energy management and control systems, it is essential to have both efficient measurement systems for data collection and acquisition and secure information exchange. These elements are fundamental to ensuring the smooth operation of energy systems and enabling precise supervision of energy flows, thus contributing to more efficient use of available electrical resources. This article focuses on the implementation of a complete electrical energy calculation and management system for energy consumers. To achieve this, devices such as integrated digital control units and current and voltage sensors are used. The system architecture guarantees precise measurement and calculation of electrical energy and other important parameters, such as power factor in the case of inductive and capacitive loads, which have an effect on reactive energy. The data collected is stored in a secure database.
- Open Access
- 1 October 2025
- Published by Institute of Advanced Engineering and Science in International Journal of Electrical and Computer Engineering (IJECE)
- Vol. 15 (5) , 4454-4464
Comparison of long short-term memory and deep neural network optimized neural networks for maximum power tracking of wind turbines
In wind energy conversion systems, maximum power point tracking (MPPT) performance is crucial, as it is directly related to wind speed variability and the characteristics of the equipment used. Maximum power point tracking controllers are essential for optimizing the efficiency of wind power generation. This paper presents the development of three distinct approaches to maximum power point tracking: the classical perturb and observe (P&O) method, and two other techniques based on artificial intelligence, namely long short-term memory (LSTM) networks and deep neural networks (DNNs). Rather than focusing solely on the development of an intelligent neural network-based maximum power point tracking model, our work emphasizes the design of a deep neural network controller with an optimized architecture and a reduced number of layers and neurons per layer, thereby simplifying its implementation in embedded process control units while maintaining high maximum power point tracking performance. The results obtained show that our optimized deep neural network model identifies the point of maximum power more effectively than other techniques, demonstrating remarkable performance in terms of response time, accuracy, and the quality of the generated power.
- 1 October 2025
- Published by Institute of Advanced Engineering and Science in International Journal of Electrical and Computer Engineering (IJECE)
- Vol. 15 (5) , 4454-4464
Open AccessComparison of long short-term memory and deep neural network optimized neural networks for maximum power tracking of wind turbines
In wind energy conversion systems, maximum power point tracking (MPPT) performance is crucial, as it is directly related to wind speed variability and the characteristics of the equipment used. Maximum power point tracking controllers are essential for optimizing the efficiency of wind power generation. This paper presents the development of three distinct approaches to maximum power point tracking: the classical perturb and observe (P&O) method, and two other techniques based on artificial intelligence, namely long short-term memory (LSTM) networks and deep neural networks (DNNs). Rather than focusing solely on the development of an intelligent neural network-based maximum power point tracking model, our work emphasizes the design of a deep neural network controller with an optimized architecture and a reduced number of layers and neurons per layer, thereby simplifying its implementation in embedded process control units while maintaining high maximum power point tracking performance. The results obtained show that our optimized deep neural network model identifies the point of maximum power more effectively than other techniques, demonstrating remarkable performance in terms of response time, accuracy, and the quality of the generated power.
- Open Access
- 1 September 2024
- Published by Institute of Advanced Engineering and Science in International Journal of Power Electronics and Drive Systems (IJPEDS)
- Vol. 15 (3) , 1490-1498
DSP implementation and discretization of phase locked loop methods in presence of grid imperfections
The fluctuation of grid variables affects the performance of the phase-locked loop, considerably reducing the efficiency of grid energy injection or compensation currents generation during active filtering. The phase locked loop is the main tool for grid synchronization, offering continuous, real-time extraction of grid variables. As these techniques are implemented on digital computers, their discretization and analysis of resource requirements is an important step. This work represents a discretization and implementation on a digital signal processing (DSP) board of two distinct phase-locked loop (PLL) techniques as well as a comparative study of the latter. Our study covers various aspects, including the discretization of the PLLs to be studied, an assessment of the hardware resources required, their implementation on a DSP board, and their effectiveness in quickly identifying grid variables in the presence of imbalance and harmonics, which represent the most frequent grid imperfections.
- 1 September 2024
- Published by Institute of Advanced Engineering and Science in International Journal of Power Electronics and Drive Systems (IJPEDS)
- Vol. 15 (3) , 1490-1498
Open AccessDSP implementation and discretization of phase locked loop methods in presence of grid imperfections
The fluctuation of grid variables affects the performance of the phase-locked loop, considerably reducing the efficiency of grid energy injection or compensation currents generation during active filtering. The phase locked loop is the main tool for grid synchronization, offering continuous, real-time extraction of grid variables. As these techniques are implemented on digital computers, their discretization and analysis of resource requirements is an important step. This work represents a discretization and implementation on a digital signal processing (DSP) board of two distinct phase-locked loop (PLL) techniques as well as a comparative study of the latter. Our study covers various aspects, including the discretization of the PLLs to be studied, an assessment of the hardware resources required, their implementation on a DSP board, and their effectiveness in quickly identifying grid variables in the presence of imbalance and harmonics, which represent the most frequent grid imperfections.
- Open Access
- 1 June 2024
- Published by Institute of Advanced Engineering and Science in International Journal of Power Electronics and Drive Systems (IJPEDS)
- Vol. 15 (2) , 883-891
Comparing fuzzy logic and backstepping control for a buck boost converter in electric vehicles
Significant advances have been made in the control of DC/DC converters, owing to the effective combination of linear and nonlinear approaches. The above-mentioned approaches have greatly improved the efficiency as well as stability of the converter, even when faced with changing conditions. Nevertheless, the emergence of artificial intelligence has introduced new perspectives in the domain. The objective of the article is to examine two separate methodologies for controlling a boost-buck converter: using a nonlinear approach, especially backstepping, and utilizing artificial intelligence through fuzzy logic. The main aim of this work is to illustrate the inherent stability and robustness of fuzzy logic controllers compared to backstepping control in managing effectively various variations and challenges encountered in converter control.
- 1 June 2024
- Published by Institute of Advanced Engineering and Science in International Journal of Power Electronics and Drive Systems (IJPEDS)
- Vol. 15 (2) , 883-891
Open AccessComparing fuzzy logic and backstepping control for a buck boost converter in electric vehicles
Significant advances have been made in the control of DC/DC converters, owing to the effective combination of linear and nonlinear approaches. The above-mentioned approaches have greatly improved the efficiency as well as stability of the converter, even when faced with changing conditions. Nevertheless, the emergence of artificial intelligence has introduced new perspectives in the domain. The objective of the article is to examine two separate methodologies for controlling a boost-buck converter: using a nonlinear approach, especially backstepping, and utilizing artificial intelligence through fuzzy logic. The main aim of this work is to illustrate the inherent stability and robustness of fuzzy logic controllers compared to backstepping control in managing effectively various variations and challenges encountered in converter control.
- Open Access
- 1 June 2024
- Published by Institute of Advanced Engineering and Science in International Journal of Power Electronics and Drive Systems (IJPEDS)
- Vol. 15 (2) , 815-823
The implementation of an optimized neural network in a hybrid system for energy management
In the face of increasing global energy demand and volatile energy prices, many countries are searching for solutions to ensure their energy independence. One of the most popular solutions is to incorporate renewable energy sources in their energy systems. While there are many advantages to integrating renewable energy sources, it is important to note that their intermittent operation can present challenges. Energy storage and smart grid management systems are key solutions to overcome these challenges and ensure sustainable, reliable use of renewable energy sources. In this article, we present an intelligent electrical energy management system for hybrid energy systems. This management system is based on a multi-layer neural network that has undergone an architecture optimization phase to improve the accuracy of real-time energy management and simplify its implementation. The management model that was built demonstrated highly good performance across a range of test circumstances.
- 1 June 2024
- Published by Institute of Advanced Engineering and Science in International Journal of Power Electronics and Drive Systems (IJPEDS)
- Vol. 15 (2) , 815-823
Open AccessThe implementation of an optimized neural network in a hybrid system for energy management
In the face of increasing global energy demand and volatile energy prices, many countries are searching for solutions to ensure their energy independence. One of the most popular solutions is to incorporate renewable energy sources in their energy systems. While there are many advantages to integrating renewable energy sources, it is important to note that their intermittent operation can present challenges. Energy storage and smart grid management systems are key solutions to overcome these challenges and ensure sustainable, reliable use of renewable energy sources. In this article, we present an intelligent electrical energy management system for hybrid energy systems. This management system is based on a multi-layer neural network that has undergone an architecture optimization phase to improve the accuracy of real-time energy management and simplify its implementation. The management model that was built demonstrated highly good performance across a range of test circumstances.