XXXin Xiong

Xin Xiong

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Xin Xiong has a total of 45 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Performance regulation and intelligent application of 4D-printed carbon fiber-reinforced TPU/PLA/CF composites

    by Haorui Zhai, Sen Wang, Qiang Zhang, Ruhong Ma, Ying Chang, Xiaonan Wang, Xin Xiong, Jianlei Wang, Lixin Wu

    This study aims to develop carbon fiber (CF)-reinforced thermoplastic polyurethane/polylactic acid (TPU/PLA) composite filaments tailored for 4D printing, with systematic investigation into the effects of CF content on material properties and shape memory behavior. Dog-bone tensile coupons, rectangular strips, complex honeycombs and biomimetic petals were additively manufactured by fused deposition modeling. Mechanical tests on dog-bone tensile coupons revealed that the incorporation of an optimal amount of CFs significantly enhanced the tensile strength of the composite. Uniaxial tensile tests with three parallel replicates were conducted, and all results were statistically processed as mean ± standard deviation. For instance, specifically, as the CF content increased from 0 wt.% to 2 wt.%, 4 wt.%, and 6 wt.%, the tensile strength rose from 3.5 ± 0.28 MPa to 5.5 ± 0.32 MPa, 8.08 ± 0.41 MPa, and 10.86 ± 0.53 MPa, respectively, representing a maximum increase of 210% compared to the pure TPU/PLA matrix. Thermal responsive shape memory tests demonstrate that CF fillers accelerate thermal-induced shape recovery, consistent with widely recognized heat conduction mechanisms reported in existing CF/polymer composite literatures. Specifically, the 6 wt.% CF sample attained roughly 80% recovery within 4 s and a final recovery ratio of 93.33 ± 1.08%. The honeycomb recovered 98.88% in 6 s under thermal stimulation, and the bilayer petals showed programmable sequential actuation, confirming their smart-structure potential. By simply replacing the petals with soft robotic grippers and using the same material system and printing process, diverse deformation sequences can be on-demand programmed. This strategy makes the low-cost, mass-producible fabrication of such intelligent structures readily achievable. These findings highlight the composite’s potential for flexible sensors and 4D-printed intelligent structures.

  • Research on linear quadratic regulator control strategy for active suspensions based on improved multi-objective coati optimisation algorithm

    by Xin Xiong, Aohui Hua, Zhihong Li, Ping Ding, Jiakun Yan, Huanhuan Gao

    Weight matrix selection in linear quadratic regulator-controlled active suspensions has long depended on empirical iteration, and single-objective cost formulations cannot simultaneously satisfy the competing demands of vertical ride quality, tyre–road contact and suspension travel. This paper proposes an improved multi-objective coati optimisation algorithm for automated linear quadratic regulator weight tuning. Two enhancements are introduced into the original coati optimisation algorithm: Latin hypercube sampling for initialisation, which ensures even coverage of the search space, and an elite-retention archive based on crowding distance, which keeps the Pareto front evenly distributed. The single-objective variant (improved coati optimisation algorithm) is benchmarked on the IEEE CEC 2022 suite, while the improved multi-objective coati optimisation algorithm is validated on the disconnected-front DTLZ7 problem against the multi-objective coati optimisation algorithm, multi-objective particle swarm optimisation, multi-objective grey wolf optimiser and multi-objective whale optimisation algorithm, where the original multi-objective coati optimisation algorithm fails entirely (HV = 0). Applied to a quarter-car model under Class-D random excitation, the improved multi-objective coati optimisation algorithm-linear quadratic regulator reduces RMS body vertical acceleration by 47.98% and 20.75% relative to the passive and conventional linear quadratic regulator baselines, and suspension travel by 58.75% and 19.89%, respectively, while keeping dynamic tyre deflection within the road-holding safety bound. Robustness is confirmed across no-/half-/full-load and Class-B/D conditions. Since the optimisation is offline and the final controller is a fixed-gain linear quadratic regulator, the scheme suits real-time automotive implementation.

  • Open Access

    Multiphysics Investigation on Thermal Characteristics of Internal Bio-Inspired V-Ribbed Cooling Channels for Outer Rotor PMSM

    by Xin Xiong, Xiangyu Li, Shawn You, Bing Zhu, Ping Ding, Huanhuan Gao, Zongqi Hou

    Meeting the rigorous performance standards of modern electrified transit necessitates the deployment of high-performance outer rotor PMSMs with elevated power-to-volume ratios. However, their unique internal heat source topology inherently restricts heat dissipation. This limitation risks permanent magnet demagnetization and winding insulation failure. To address these thermal bottlenecks, this paper proposes internal bio-inspired cooling channels. These channels feature micro-scale V-shaped ribs. This design targets a 60 kW outer rotor PMSM. The motor uses a fractional-slot concentrated winding. The analytical procedure commences with the formulation of a transient 2D numerical model utilizing the Time-Stepping Finite Element approach (TS-FEM). It is coupled with the Bertotti model to compute electromagnetic losses. This approach accurately determines losses under high-frequency rated conditions. Results reveal that stator iron loss constitutes the dominant heat source. It accounts for 76.4 percent of the total electromagnetic loss. Furthermore, these losses show severe spatial concentration at the stator teeth. Subsequently, a three-dimensional fluid-solid coupled CFD model is developed. This model evaluates the proposed internal cooling channels. The design integrates bio-inspired vein networks and V-shaped ribs. These internal ribs disrupt the near-wall thermal boundary layer. This disruption enhances the local convective heat transfer. Comparative multiphysics analyses indicate improved hydraulic and thermal performance of the bio-inspired design under the same numerical boundary conditions. The bio-inspired channel achieves a more uniform static pressure distribution and reduces severe fluid stagnation zones. In the numerical model, the maximum stator and permanent magnet temperatures are reduced to 48 °C and 42 °C, respectively. This work provides a numerical design reference for thermal management in high-performance electric aviation.

  • Optimization of hydraulic electric energy-feeding suspension based on improved cloud particle swarm optimization-cuckoo search algorithm

    by Xin Xiong, Jiakun Yan, Fei Xu

    To address the problems of slow steady-state response, poor optimization accuracy, and easy falling into local optima in the parameter optimization of hydraulic electric energy-feeding suspension systems, an improved cloud particle swarm optimization-cuckoo search (CPSO-CS) algorithm was proposed. The algorithm innovatively integrated cloud theory and Logistic chaotic initialization into the traditional particle swarm optimization (PSO) and, combined with the levy flight local search mechanism of cuckoo search (CS), achieved a balance between global exploration and local development. Under Class-B, Class-C, and convex road excitations, the dynamic characteristics of passive control, sliding mode control (SMC), PSO control, and CPSO-CS control strategy applied to the hydraulic electric energy-feeding suspension were analyzed. Vertical body acceleration, suspension dynamic deflection, and tire dynamic load were selected as the evaluation indices. The results indicate that the proposed improved algorithm enhances both the optimization accuracy and convergence speed of the suspension system’s dynamic performance indices, thereby significantly improving the ride comfort of the hydraulic electric energy-feeding suspension system.

  • Structural design and performance study of an energy-harvesting damper optimized by multi-objective gray wolf algorithm

    by Xin Xiong, Yaming Liu, Changzhuang Chen, Lingfeng Zhang, Fei Xu

    In this study, an electromagnetic damper with an external integrated energy harvester is designed to solve the problem of ride comfort and vertical vibration energy recovery in suspension systems.During the structural design of the electromagnetic damper, a multi-objective gray wolf algorithm is employed to optimize the structural parameters of the energy-harvesting device under the constraint of damper dimensions. The Halbach array method is simulated by using a magnetic ring and an axially magnetized permanent magnet ring. A quarter energy-harvesting suspension system is used as the research subject for simulation analysis of ride comfort and energy-harvesting performance. Compared with the traditional suspension, under the B-Class road excitation with a load resistance of 10 Ω, the electromagnetic energy-harvesting suspension system achieved improvements of 14.7%, 25.4%, and 21.7% in the root mean square (RMS) values of the acceleration, suspension dynamic deflection, and tire dynamic load, respectively. Under step road excitation, the RMS values of the acceleration, suspension dynamic deflection, and tire dynamic load improved by 19.0%, 22.7%, and 20.3%, respectively. Ensuring good ride comfort while achieving effective energy harvesting. Finally, a prototype is developed to experimentally verify the energy harvesting characteristics of the damper.


  • Open Access

    Trends in Flexible Sensing Technology in Smart Wearable Mechanisms–Materials–Applications

    by Sen Wang, Haorui Zhai, Qiang Zhang, Xueling Hu, Yujiao Li, Xin Xiong, Ruhong Ma, Jianlei Wang, Ying Chang, Lixin Wu

    Flexible sensors are revolutionizing our lives as a key component of intelligent wearables. Their pliability, stretchability, and diverse designs enable foldable and portable devices while enhancing comfort and convenience. Advances in materials science have provided numerous options for creating flexible sensors. The core of their application in areas like electronic skin, health medical monitoring, motion monitoring, and human–computer interaction is selecting materials that optimize sensor performance in weight, elasticity, comfort, and flexibility. This article focuses on flexible sensors, analyzing their “sensing mechanisms–materials–applications” framework. It explores their development trajectory, material characteristics, and contributions in various domains such as electronic skin, health medical monitoring, and human–computer interaction. The article concludes by summarizing current research achievements and discussing future challenges and opportunities. Flexible sensors are expected to continue expanding into new fields, driving the evolution of smart wearables and contributing to the intelligent development of society.


  • Research on ride control strategy of electromagnetic suspension based on sliding mode algorithm

    by Xin Xiong, JiaLing Chen, JinCheng Wei, Fei Xu

    This study proposes a main inner loop control technique to address the dynamic response of the electromagnetic suspension during vehicle driving. The genetic algorithm is employed to optimize the control parameters of the linear quadratic adjustment controller in the control main loop, with the aim of achieving the desired control force. In the control inner loop, a closed-loop sliding mode controller is designed based on the exponential approximation law to regulate the current. The Lyapunov function was utilized to assess the stability of the controller in terms of its theoretical feasibility. The simulation results of Matlab/Simulink show that under the given working conditions, compared with the passive suspension, sliding mode control and fuzzy sliding mode control for references, the root mean square value and peak value of the vertical acceleration of the body and the dynamic load of the tire with the improved sliding mode control are significantly reduced, the root mean square value of the dynamic deflection of the suspension was not improved. However, on the whole, the ride comfort of the vehicle has been improved.


  • Research on robust backstepping sliding mode control strategy for magnetorheological semi-active suspension based on quantized input signals

    by Xin Xiong, Changzhuang Chen, Bing Zhu, Yaming Liu, Zhihong Li, Fei Xu

    To enhance control effectiveness and mitigate system oscillations in backstepping sliding mode control, a robust backstepping sliding mode control strategy based on a hysteretic quantizer is proposed for application in magnetorheological (MR) semi-active suspension (SAS) systems. To accurately predict the output current for precise control, a fuzzy neural network (FNN) is used to construct an inverse model for magnetorheological damper (MRD), input the current into the Dahl model and output the actual damping force. Based on the MRD inverse model, the robust term is introduced in the backstepping sliding mode control, and a hysteretic quantizer is used to quantify the controller input signals, avoiding the occurrence of oscillations and forming a complete closed-loop feedback control. Simulation results demonstrate that the FNN inverse model can accurately predict the control current. Compared to backstepping control and passive suspension, the robust backstepping sliding mode control strategy based on a hysteretic quantizer (RBSMC-HQ) reduces the root mean square (RMS) values of vehicle body acceleration by 37.59% and 44.82% respectively under A-Class road conditions, and by 41.93% and 44.84% respectively under B-Class road conditions. This control strategy effectively enhances the ride comfort and handling stability.


  • An adaptive robust sliding mode control strategy based on radial basis function neural networks for the magnetorheological semi-active suspension

    by Xin Xiong, Zeyu Pan, Gang Yang, Changzhuang Chen, Fei Xu, Bing Zhu

    This paper proposes an adaptive robust sliding mode control (SMC) strategy based on radial basis function neural networks (RBF-NNs) to address nonlinear issues in semi-active suspension system (SASS), such as external disturbances and uncertain parameters. Firstly, the Dahl model is selected for the parameters identification of the magnetorheological (MR) damper, followed by the establishment of a model for the SASS. Secondly, this paper proposes a control strategy that integrates robust control with SMC. The RBF-NNs are utilized to estimate the system’s uncertain parameters, thereby enhancing the robustness of the suspension system against external disturbances and ensuring its stability. The stability and controllability of the closed-loop SASS are rigorously verified through the application of Lyapunov theory.1 Under the road excitations of B-Class and speed bump, the dynamic characteristics of the passive control, the robust SMC, and the adaptive robust SMC based on RBF-NNs applied to the MR-SASS are analyzed. The vertical acceleration of the automobile body, the suspension working space and the tire dynamic load are selected as the evaluation indices. The results demonstrate that the adaptive robust SMC significantly improves the ride comfort and handling stability of the vehicle.


  • A fuzzy skyhook control strategy optimized by particle swarm strategy for magnetorheological semi-active suspension

    by Xin Xiong, Yaming Liu, Fei Xu

    In order to solve the problem of unsatisfactory control effect caused by uncertain parameters in the fuzzy skyhook control method, a fuzzy skyhook control strategy optimized by particle swarm strategy is proposed. The magnetorheological (MR) damper is put on the bench for mechanical characteristics experiment, and the forward model of MR damper is established. The adaptive network fuzzy inference system (ANFIS) system in simulation software is used to build its inverse model to verify the accuracy of the forward model of MR damper. A quarter vehicle suspension model is established, and a fuzzy skyhook control strategy based on particle swarm optimization is designed. Numerical simulations are carried out under the excitation of random road. The acceleration, suspension dynamic deflection and tire dynamic load are used to evaluate its performance. Compared with the passive control, the root mean square (RMS) values of the acceleration for the fuzzy skyhook control strategy are improved by 41.9% and 37.6%, the RMS values of the suspension dynamic deflection for the fuzzy skyhook control strategy are improved by 53.3% and 48.0%, and the RMS values of the tire dynamic load for the fuzzy skyhook control strategy are improved by 17.6% and 14.5% under the B-Class and C-Class road excitations. The simulations and experimental results verify the effectiveness of the controller.