David B. Tuckerman
David B. Tuckerman has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
John A. Sellers
Auburn Univ, Elect & Comp Engn Dept, Auburn, AL 36849 USA
1 shared publication- Joseph A. Gauthier
Department of Chemical Engineering Texas Tech University 79409 Lubbock TX USA
1 shared publication - Juergen J. Brandner
Karlsruhe Institute of Technology (KIT), Institute of Microstructure Technology (IMT) , Eggenstein-Leopoldshafen, 76344
1 shared publication - Kabian Ritter
Tidepool Research, LLC
1 shared publication - Karsten Bruening
Tidepool Research, LLC
1 shared publication - Mark L. Adams
Department of Electrical and Computer Engineering, Auburn University, Auburn, AL, USA
1 shared publication
Latest Publications
- Open Access
- 3 July 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Dynamic changes in hydrogen evolution catalysis impose an upper bound on electrochemical hydrogen storage in Pd
Efficient storage of renewably produced hydrogen remains a serious bottleneck in the global transition to a hydrogen-based energy system. Production of metal “super- hydrides” with a greater than 1:1 metal to hydrogen stoichiometry, produced by an electrochemical driving force in aqueous electrolyte, is experiencing emerging interest as a possible solution to this critical challenge. In this work, using palladium and its hydride (PdHx) as a model system, we combine state-of-the-art grand canonical density functional theory (DFT) and operando X-ray diffraction to investigate the feasibility and limitations of electrochemical hydrogen storage via formation of metal hydrides. We develop a unique computational model of PdHx with high granularity, particularly in the high loading (0.6 <x ≤1.0) regime. After benchmarking calculated lattice strain to operando X-ray diffraction measurements, we reveal that there is a signifi- cant energetic penalty to filling all six octahedral sites surrounding Pd, and that the well-known α−/β−PdHx coexistence is a macroscopic phenomenon. Using our com- putational model of PdHx, we calculate the bias-, coverage-, and loading-dependent activation barriers and reaction energies for the Volmer and Tafel reactions. Our find- ings reveal that dynamic changes in the activation barriers and reaction energies of hydrogen evolution reaction (HER) sub-reactions impose an upper bound on electro- chemical hydrogen storage, well below theoretically predicted loadings via formation of superhydrides. This work establishes a formalism for theoretical investigations of the electrochemical formation of metal hydrides, and provides fundamental insights into the critical importance of the surface in electrochemical loading of metal hydrides.
- 3 July 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessDynamic changes in hydrogen evolution catalysis impose an upper bound on electrochemical hydrogen storage in Pd
Efficient storage of renewably produced hydrogen remains a serious bottleneck in the global transition to a hydrogen-based energy system. Production of metal “super- hydrides” with a greater than 1:1 metal to hydrogen stoichiometry, produced by an electrochemical driving force in aqueous electrolyte, is experiencing emerging interest as a possible solution to this critical challenge. In this work, using palladium and its hydride (PdHx) as a model system, we combine state-of-the-art grand canonical density functional theory (DFT) and operando X-ray diffraction to investigate the feasibility and limitations of electrochemical hydrogen storage via formation of metal hydrides. We develop a unique computational model of PdHx with high granularity, particularly in the high loading (0.6 <x ≤1.0) regime. After benchmarking calculated lattice strain to operando X-ray diffraction measurements, we reveal that there is a signifi- cant energetic penalty to filling all six octahedral sites surrounding Pd, and that the well-known α−/β−PdHx coexistence is a macroscopic phenomenon. Using our com- putational model of PdHx, we calculate the bias-, coverage-, and loading-dependent activation barriers and reaction energies for the Volmer and Tafel reactions. Our find- ings reveal that dynamic changes in the activation barriers and reaction energies of hydrogen evolution reaction (HER) sub-reactions impose an upper bound on electro- chemical hydrogen storage, well below theoretically predicted loadings via formation of superhydrides. This work establishes a formalism for theoretical investigations of the electrochemical formation of metal hydrides, and provides fundamental insights into the critical importance of the surface in electrochemical loading of metal hydrides.
- 29 January 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 31 (5) , 1-4
Atomic Layer Deposited Materials as Barrier Layers for Preservation of Nb Superconductivity in Multilayered Thin-Film Structures
We have investigated $\text{Al}_{2}\text{O}_{3}$ as a thin interface material between Nb and polyimide, deposited using a relatively low temperature thermal atomic layer deposition (ALD) process to preserve the superconducting properties of the Nb layer. 250 nm thick Nb traces, with ˜ 20 nm thick layers of Al2O3 were used for this work. HD-4110 spin-on polyimide by HD MicroSystems with a thickness of ˜ 20 μm was used with different curing temperatures of 225 °C and 375 °C. DC electrical characterization of patterned Nb lines were carried out using a pulse-tube based cryostat to determine $T_{c}$ and $I_{c}$ for the samples at different steps in the fabrication process. Details of the fabrication processes, experimental procedures and performance results are included. Results of these experiments provide insight into materials stack-ups and fabrication process options for robust, multi-layer superconducting flexible cables that can be used for signal transmission in future denselyintegrated cryogenic electronics systems.- 29 January 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 31 (5) , 1-4
Atomic Layer Deposited Materials as Barrier Layers for Preservation of Nb Superconductivity in Multilayered Thin-Film Structures
We have investigated $\text{Al}_{2}\text{O}_{3}$ as a thin interface material between Nb and polyimide, deposited using a relatively low temperature thermal atomic layer deposition (ALD) process to preserve the superconducting properties of the Nb layer. 250 nm thick Nb traces, with ˜ 20 nm thick layers of Al2O3 were used for this work. HD-4110 spin-on polyimide by HD MicroSystems with a thickness of ˜ 20 μm was used with different curing temperatures of 225 °C and 375 °C. DC electrical characterization of patterned Nb lines were carried out using a pulse-tube based cryostat to determine $T_{c}$ and $I_{c}$ for the samples at different steps in the fabrication process. Details of the fabrication processes, experimental procedures and performance results are included. Results of these experiments provide insight into materials stack-ups and fabrication process options for robust, multi-layer superconducting flexible cables that can be used for signal transmission in future denselyintegrated cryogenic electronics systems.- Top Cited Papers
- 26 July 2013
- Published by Wiley in Journal of Heat Transfer
- Vol. 135 (9) , 091001
Heat Transfer in Microchannels—2012 Status and Research Needs
Heat transfer and fluid flow in microchannels have been topics of intense research in the past decade. A critical review of the current state of research is presented with a focus on the future research needs. After providing a brief introduction, the paper addresses six topics related to transport phenomena in microchannels: single-phase gas flow, enhancement in single-phase liquid flow and flow boiling, flow boiling instability, condensation, electronics cooling, and microscale heat exchangers. After reviewing the current status, future research directions are suggested. Concerning gas phase convective heat transfer in microchannels, the antagonist role played by the slip velocity and the temperature jump that appear at the wall are now clearly understood and quantified. It has also been demonstrated that the shear work due to the slipping fluid increases the effect of viscous heating on heat transfer. On the other hand, very few experiments support the theoretical models and a significant effort should be made in this direction, especially for measurement of temperature fields within the gas in microchannels, implementing promising recent techniques such as molecular tagging thermometry (MTT). The single-phase liquid flow in microchannels has been established to behave similar to the macroscale flows. The current need is in the area of further enhancing the performance. Progress on implementation of flow boiling in microchannels is facing challenges due to its lower heat transfer coefficients and critical heat flux (CHF) limits. An immediate need for breakthrough research related to these two areas is identified. Discussion about passive and active methods to suppress flow boiling instabilities is presented. Future research focus on instability research is suggested on developing active closed loop feedback control methods, extending current models to better predict and enable superior control of flow instabilities. Innovative high-speed visualization and measurement techniques have led to microchannel condensation now being studied as a unique process with its own governing influences. Further work is required to develop widely applicable flow regime maps that can address many fluid types and geometries. With this, condensation heat transfer models can progress from primarily annular flow based models with some adjustments using dimensionless parameters to those that can directly account for transport in intermittent and other flows, and the varying influences of tube shape, surface tension and fluid property differences over much larger ranges than currently possible. Electronics cooling continues to be the main driver for improving thermal transport processes in microchannels, while efforts are warranted to develop high performance heat exchangers with microscale passages. Specific areas related to enhancement, novel configurations, nanostructures and practical implementation are expected to be the research focus in the coming years.
- 26 July 2013
- Published by Wiley in Journal of Heat Transfer
- Vol. 135 (9) , 091001
Top Cited PapersHeat Transfer in Microchannels—2012 Status and Research Needs
Heat transfer and fluid flow in microchannels have been topics of intense research in the past decade. A critical review of the current state of research is presented with a focus on the future research needs. After providing a brief introduction, the paper addresses six topics related to transport phenomena in microchannels: single-phase gas flow, enhancement in single-phase liquid flow and flow boiling, flow boiling instability, condensation, electronics cooling, and microscale heat exchangers. After reviewing the current status, future research directions are suggested. Concerning gas phase convective heat transfer in microchannels, the antagonist role played by the slip velocity and the temperature jump that appear at the wall are now clearly understood and quantified. It has also been demonstrated that the shear work due to the slipping fluid increases the effect of viscous heating on heat transfer. On the other hand, very few experiments support the theoretical models and a significant effort should be made in this direction, especially for measurement of temperature fields within the gas in microchannels, implementing promising recent techniques such as molecular tagging thermometry (MTT). The single-phase liquid flow in microchannels has been established to behave similar to the macroscale flows. The current need is in the area of further enhancing the performance. Progress on implementation of flow boiling in microchannels is facing challenges due to its lower heat transfer coefficients and critical heat flux (CHF) limits. An immediate need for breakthrough research related to these two areas is identified. Discussion about passive and active methods to suppress flow boiling instabilities is presented. Future research focus on instability research is suggested on developing active closed loop feedback control methods, extending current models to better predict and enable superior control of flow instabilities. Innovative high-speed visualization and measurement techniques have led to microchannel condensation now being studied as a unique process with its own governing influences. Further work is required to develop widely applicable flow regime maps that can address many fluid types and geometries. With this, condensation heat transfer models can progress from primarily annular flow based models with some adjustments using dimensionless parameters to those that can directly account for transport in intermittent and other flows, and the varying influences of tube shape, surface tension and fluid property differences over much larger ranges than currently possible. Electronics cooling continues to be the main driver for improving thermal transport processes in microchannels, while efforts are warranted to develop high performance heat exchangers with microscale passages. Specific areas related to enhancement, novel configurations, nanostructures and practical implementation are expected to be the research focus in the coming years.