Lucas Antônio da Silva de Jesus
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Lucas Antônio da Silva de Jesus has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
Rivaldo Leonn Bezerra Cabral
Postgraduate Program in Chemical Engineering Center of Technology Federal University of Rio Grande do Norte Natal 59072-970 RN Brazil
4 shared publicationsJosé Heriberto Oliveira Do Nascimento
Postgraduate Program in Chemical Engineering Center of Technology Federal University of Rio Grande do Norte Natal 59072-970 RN Brazil
3 shared publicationsEdney Rafael Viana Pinheiro Galvão
Department of Petroleum Engineering, Federal University of Rio Grande Do Norte, Natal, RN, 59072-970, Brazil
2 shared publicationsMyllena Kely Pereira Ferreira
Center of Technology, Postgraduate Program in Chemical Engineering, Federal University of Rio Grande Do Norte, Natal, RN, 59072-970, Brazil
2 shared publicationsRafael Barbosa Rios
Department of Engineering and Technology, Federal University of the Semi-Arid Region, Mossoró, RN, 59625-900, Brazil
2 shared publications- Carlos Alberto Martinez Huitle
Renewable Energies and Environmental Sustainability Research Group Institute of Chemistry Federal University of Rio Grande do Norte Natal Rio Grande do Norte Brazil
1 shared publication
Latest Publications
- 21 July 2025
- Published by Revista Cientifica Semana Academica in Revista Científica Semana Acadêmica
- Vol. 13 (260) , 1-11
AVALIAÇÃO DE REDUTORES DE CORROSÃO POR H2S EM AÇO INOXIDÁVEL: UMA IMPLICAÇÃO INDUSTRIAL
Metallic structures are subject to degradation processes, with corrosion standing out as one of the main failure mechanisms. In the industrial context, hydrogen sulfide (H₂S) is one of the most aggressive corrosive agents, affecting not only the integrity of equipment, but also representing risks to occupational health and the environment. This work consists of a literature review with the objective of analyzing the corrosive effects of H₂S on metallic parts, especially stainless steel, and investigating effective strategies to mitigate these effects. The approach includes the study of corrosion prevention and control technologies, such as chemical inhibitors, bioinhibitors and protective coatings. The choice of the most appropriate protection methodology depends on the type of corrosion involved and the degree of damage to the material. The implementation of efficient corrosion control measures directly impacts the useful life of industrial equipment and the economy of companies, promoting reduction of operating costs and increased process reliability. In view of this, there is growing investment by the industry in research and development of innovative solutions for monitoring and preventing corrosion in aggressive environments.
- 21 July 2025
- Published by Revista Cientifica Semana Academica in Revista Científica Semana Acadêmica
- Vol. 13 (260) , 1-11
AVALIAÇÃO DE REDUTORES DE CORROSÃO POR H2S EM AÇO INOXIDÁVEL: UMA IMPLICAÇÃO INDUSTRIAL
Metallic structures are subject to degradation processes, with corrosion standing out as one of the main failure mechanisms. In the industrial context, hydrogen sulfide (H₂S) is one of the most aggressive corrosive agents, affecting not only the integrity of equipment, but also representing risks to occupational health and the environment. This work consists of a literature review with the objective of analyzing the corrosive effects of H₂S on metallic parts, especially stainless steel, and investigating effective strategies to mitigate these effects. The approach includes the study of corrosion prevention and control technologies, such as chemical inhibitors, bioinhibitors and protective coatings. The choice of the most appropriate protection methodology depends on the type of corrosion involved and the degree of damage to the material. The implementation of efficient corrosion control measures directly impacts the useful life of industrial equipment and the economy of companies, promoting reduction of operating costs and increased process reliability. In view of this, there is growing investment by the industry in research and development of innovative solutions for monitoring and preventing corrosion in aggressive environments.
- 14 April 2025
- Published by Springer Nature in Emergent Materials
- Vol. 8 (4) , 2617-2634
High photocatalytic activity of Nb2O5/Ag composite in solar light-driven photodegradation of Reactive Blue 109 dye
- 14 April 2025
- Published by Springer Nature in Emergent Materials
- Vol. 8 (4) , 2617-2634
High photocatalytic activity of Nb2O5/Ag composite in solar light-driven photodegradation of Reactive Blue 109 dye
- Open Access
- 1 January 2025
- Published by Even3
- Vol. 1, 1
Synthesis of reduced graphene oxide derived from textile industrial cellulosic residue
The production of graphene using industrial waste as a raw material has emerged as a promising strategy, aligning technological innovation with environmental sustainability. In this study, an alternative synthesis process is presented for producing reduced graphene oxide (rGO) obtained from the pyrolysis of a cellulosic residue (RC-rGO), an innovative and sustainable twodimensional nanomaterial. RC-rGO was characterized by using analytical techniques such as XRD, FTIR, and Raman to confirm the conversion of biomass into graphene. Microscopy images revealed that this synthesis route produces high-quality nanomaterials. Analysis of the crystalline structure and identification of the functional groups present in the structure demonstrated that all cellulosic material was converted into a 2D nanomaterial. Evaluation of the structural characteristics indicated that this process yields graphene with a low presence of structural defects. Thus, it can be concluded that this graphene production route from industrial waste not only reduces the costs associated with its synthesis process but also contributes to proper waste management and minimizes environmental impacts.
- 1 January 2025
- Published by Even3
- Vol. 1, 1
Open AccessSynthesis of reduced graphene oxide derived from textile industrial cellulosic residue
The production of graphene using industrial waste as a raw material has emerged as a promising strategy, aligning technological innovation with environmental sustainability. In this study, an alternative synthesis process is presented for producing reduced graphene oxide (rGO) obtained from the pyrolysis of a cellulosic residue (RC-rGO), an innovative and sustainable twodimensional nanomaterial. RC-rGO was characterized by using analytical techniques such as XRD, FTIR, and Raman to confirm the conversion of biomass into graphene. Microscopy images revealed that this synthesis route produces high-quality nanomaterials. Analysis of the crystalline structure and identification of the functional groups present in the structure demonstrated that all cellulosic material was converted into a 2D nanomaterial. Evaluation of the structural characteristics indicated that this process yields graphene with a low presence of structural defects. Thus, it can be concluded that this graphene production route from industrial waste not only reduces the costs associated with its synthesis process but also contributes to proper waste management and minimizes environmental impacts.
- Open Access
- 1 January 2025
- Published by Even3
- Vol. 1, 1
Adsorption study of phenol and methylene blue using biomass derived reduced graphene oxide: Isothermal study
The contamination of water resources by organic pollutants, such as phenols and synthetic dyes, poses significant environmental and health risks due to their toxicity and persistence. Conventional treatment methods often face limitations, including high costs and inefficiency, making adsorption an attractive alternative, especially when using sustainable and highperformance carbonaceous materials. This study explores the synthesis of reduced graphene oxide derived from cellulosic waste (RC-rGO) as a low-cost and eco-friendly adsorbent for the removal of phenol and methylene blue from aqueous solutions. The adsorbent was characterized using XRD, Raman, and zeta potential techniques to confirm the conversion of the waste into reduced graphene oxide. The adsorption study was conducted by varying the parameters: pH (2–11), adsorbent mass (10–160 mg), contact time (0–180 min), and temperature (20–60 °C). The isotherm study was performed using the Langmuir, Freundlich, and Sips models, fitting the experimental data and evaluating the R² to identify the most suitable model. This work not only advances the understanding of pollutant adsorption by waste-derived carbon materials but also presents a sustainable solution for water treatment. The findings underscore the viability of RC-rGO as an efficient and environmentally friendly adsorbent, contributing to both waste valorization and pollution mitigation.
- 1 January 2025
- Published by Even3
- Vol. 1, 1
Open AccessAdsorption study of phenol and methylene blue using biomass derived reduced graphene oxide: Isothermal study
The contamination of water resources by organic pollutants, such as phenols and synthetic dyes, poses significant environmental and health risks due to their toxicity and persistence. Conventional treatment methods often face limitations, including high costs and inefficiency, making adsorption an attractive alternative, especially when using sustainable and highperformance carbonaceous materials. This study explores the synthesis of reduced graphene oxide derived from cellulosic waste (RC-rGO) as a low-cost and eco-friendly adsorbent for the removal of phenol and methylene blue from aqueous solutions. The adsorbent was characterized using XRD, Raman, and zeta potential techniques to confirm the conversion of the waste into reduced graphene oxide. The adsorption study was conducted by varying the parameters: pH (2–11), adsorbent mass (10–160 mg), contact time (0–180 min), and temperature (20–60 °C). The isotherm study was performed using the Langmuir, Freundlich, and Sips models, fitting the experimental data and evaluating the R² to identify the most suitable model. This work not only advances the understanding of pollutant adsorption by waste-derived carbon materials but also presents a sustainable solution for water treatment. The findings underscore the viability of RC-rGO as an efficient and environmentally friendly adsorbent, contributing to both waste valorization and pollution mitigation.
- 23 August 2024
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 32 (28) , 16881-16897
Evaluation of reduced graphene oxide from cotton waste as an efficient phenol adsorbent in aqueous media
The elimination of organic substances, such as phenol, in conventional and biological processes, has been considered a challenge for the petroleum industry. In this work, reduced graphene oxide (rGO), obtained from cellulosic biomass (CB-rGO), as cotton waste, was employed as a phenol adsorbent in an aqueous solution simulating refinery effluent. The CB-rGO was characterized using HRTEM, Raman, XRD, FTIR, BET, and zeta analysis. The behavior of variables such as pH, contact time, temperature, CB-rGO mass, and adsorbate concentration on the characteristics of the adsorption process were continuously investigated. These parameters of the adsorption process were evaluated across a range of adsorbent concentrations from 100 to 300 mg/L, pH in the range of 2–11, adsorbent mass 5–25 mg, contact time of 0–180 min, and temperature of 20–60 °C. The adsorption isotherm data were better described by the Freundlich equation compared to the Langmuir and Sips models, despite the small difference in R2 values. Mechanism diffusion was analyzed using the Boyd model and confirmed to be the rate-limiting step in the adsorption process. The endothermic nature of this CB-rGO adsorption process with phenol was confirmed by verifying the thermodynamic data. This successful removal of phenol from synthetic effluents highlights the promising potential of this adsorbent obtained from an industrial residue and being an ecologically more sustainable alternative compared to the synthesis of other materials identified to remove this contaminant. Graphical Abstract
- 23 August 2024
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 32 (28) , 16881-16897
Evaluation of reduced graphene oxide from cotton waste as an efficient phenol adsorbent in aqueous media
The elimination of organic substances, such as phenol, in conventional and biological processes, has been considered a challenge for the petroleum industry. In this work, reduced graphene oxide (rGO), obtained from cellulosic biomass (CB-rGO), as cotton waste, was employed as a phenol adsorbent in an aqueous solution simulating refinery effluent. The CB-rGO was characterized using HRTEM, Raman, XRD, FTIR, BET, and zeta analysis. The behavior of variables such as pH, contact time, temperature, CB-rGO mass, and adsorbate concentration on the characteristics of the adsorption process were continuously investigated. These parameters of the adsorption process were evaluated across a range of adsorbent concentrations from 100 to 300 mg/L, pH in the range of 2–11, adsorbent mass 5–25 mg, contact time of 0–180 min, and temperature of 20–60 °C. The adsorption isotherm data were better described by the Freundlich equation compared to the Langmuir and Sips models, despite the small difference in R2 values. Mechanism diffusion was analyzed using the Boyd model and confirmed to be the rate-limiting step in the adsorption process. The endothermic nature of this CB-rGO adsorption process with phenol was confirmed by verifying the thermodynamic data. This successful removal of phenol from synthetic effluents highlights the promising potential of this adsorbent obtained from an industrial residue and being an ecologically more sustainable alternative compared to the synthesis of other materials identified to remove this contaminant. Graphical Abstract
- Open Access
- 3 June 2024
- Published by Springer Nature in Research Square
Evaluation of reduced graphene oxide from cotton waste as an efficient phenol adsorbent in aqueous media
The elimination of organic substances, as well as phenol, in conventional and biological process, has been considered a challenge for the petroleum industry due to the significant oxygen demand in the receiving bodies of water and its toxicity to aquatic life. In this work, reduced graphene oxide (rGO), obtained from cellulosic biomass (CB-rGO), as cotton waste, was employed as a phenol adsorbent in an aqueous solution simulating refinery effluent. The CB-rGO was characterized using HRTEM, RAMAN, XRD, FTIR, BET and Zeta analysis. The behavior of variables such as pH, contact time, temperature, CB-rGO mass and adsorbate concentration on the characteristics of the adsorption process were continuously investigated. These parameters of the adsorption process were evaluated across a range of adsorbent concentrations from 100–300 mg.L− 1, pH in the range of 2–11, contact time of 20–60 min and temperature of 20–60°C. The adsorption isotherm data were better described by the Freundlich equation compared to the Langmuir and Sips models, despite the negligible difference in R2 values. Additionally, the kinetics study of confirmed pseudo-second order as the most appropriate model. Mechanism diffusion was analyzed using the Boyd model and confirmed to be the rate-limiting step in the adsorption process. The endothermic nature of this CB-rGO adsorption process with phenol was confirmed by verifying the thermodynamic data. This successful removal of phenol from synthetic effluent highlights the promising potential of this emerging adsorbent compared to other materials identified to remove this contaminant.
- 3 June 2024
- Published by Springer Nature in Research Square
Open AccessEvaluation of reduced graphene oxide from cotton waste as an efficient phenol adsorbent in aqueous media
The elimination of organic substances, as well as phenol, in conventional and biological process, has been considered a challenge for the petroleum industry due to the significant oxygen demand in the receiving bodies of water and its toxicity to aquatic life. In this work, reduced graphene oxide (rGO), obtained from cellulosic biomass (CB-rGO), as cotton waste, was employed as a phenol adsorbent in an aqueous solution simulating refinery effluent. The CB-rGO was characterized using HRTEM, RAMAN, XRD, FTIR, BET and Zeta analysis. The behavior of variables such as pH, contact time, temperature, CB-rGO mass and adsorbate concentration on the characteristics of the adsorption process were continuously investigated. These parameters of the adsorption process were evaluated across a range of adsorbent concentrations from 100–300 mg.L− 1, pH in the range of 2–11, contact time of 20–60 min and temperature of 20–60°C. The adsorption isotherm data were better described by the Freundlich equation compared to the Langmuir and Sips models, despite the negligible difference in R2 values. Additionally, the kinetics study of confirmed pseudo-second order as the most appropriate model. Mechanism diffusion was analyzed using the Boyd model and confirmed to be the rate-limiting step in the adsorption process. The endothermic nature of this CB-rGO adsorption process with phenol was confirmed by verifying the thermodynamic data. This successful removal of phenol from synthetic effluent highlights the promising potential of this emerging adsorbent compared to other materials identified to remove this contaminant.