Yinming Fan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yinming Fan has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Lei Liao
College of Environmental Science and Engineering, Guilin University of Technology, Guilin 541004, China
3 shared publications - Shengpeng Mo
College of Environment Science and Engineering, Guilin University of Technology, Guilin 541004, China
3 shared publications - Aimiao Qin
Key Laboratory of New Processing Technology for Nonferrous Metal & Materials, Ministry of Education, Guangxi Key Laboratory of Optical and Electronic Materials and Devices, College of Material Science and Engineering, Guilin University of Technology, Guilin 541004, China
2 shared publications - Bonian Zhou
College of Environmental Science and Engineering, Guilin University of Technology, Guilin 541004, China
2 shared publications - Xiaobin Zhou
College of Environmental Science and Engineering, Guilin University of Technology, Guilin 541004, China
2 shared publications - Aimiao Qin
College of Adsorbents Science and Engineering, Guilin University of Technology, Guilin 541004, China
1 shared publication
Latest Publications
- Open Access
- 26 February 2026
- Published by MDPI AG in Sustainability
- Vol. 18 (5) , 2240
Toward Sustainable Kitchen Emission Control: A Loofah-Enhanced Multi-Media Bio-Scrubbing Approach for Simulated Cooking Fume Purification
This study investigates the performance of a multi-media bio-scrubbing system that integrates activated sludge with loofah as a biofilm carrier for the purification of complex pollutants from simulated cooking fumes: oils, Non-Methane Hydrocarbons (NMHCs), PM2.5/PM10, and Volatile Organic Compounds (VOCs). Compared to conventional carriers like activated carbon, the biodegradable and low-cost loofah, with its hierarchical porous structure and balanced hydrophilic–lipophilic properties, showed enhanced support for microbial colonization (achieving a biomass density of 105 mg/g) and pollutant adsorption. The system achieved high removal efficiencies in lab-scale tests: 97.4% for total VOCs (including 96.5–100% removal of recalcitrant alkanes and olefins), 91.3% for oils, and >88% for PM2.5/PM10. Mechanistic analysis indicated that the biofilm was dominated by Proteobacteria and Actinomycetes, and the synergistic effect between physical adsorption (via loofah’s porosity) and biodegradation (by microbial consortia) enabled stable performance (maintaining >90% efficiency over a 25-day operation) without observed secondary pollution. The loofah-activated sludge configuration demonstrated improved operational stability and the potential for lower operating costs compared to single-medium systems in this experimental setting. This work explores a promising, eco-friendly approach for treating simulated cooking fumes, utilizing renewable biomass carriers and biological processes, which could contribute to cleaner production strategies.
- 26 February 2026
- Published by MDPI AG in Sustainability
- Vol. 18 (5) , 2240
Open AccessToward Sustainable Kitchen Emission Control: A Loofah-Enhanced Multi-Media Bio-Scrubbing Approach for Simulated Cooking Fume Purification
This study investigates the performance of a multi-media bio-scrubbing system that integrates activated sludge with loofah as a biofilm carrier for the purification of complex pollutants from simulated cooking fumes: oils, Non-Methane Hydrocarbons (NMHCs), PM2.5/PM10, and Volatile Organic Compounds (VOCs). Compared to conventional carriers like activated carbon, the biodegradable and low-cost loofah, with its hierarchical porous structure and balanced hydrophilic–lipophilic properties, showed enhanced support for microbial colonization (achieving a biomass density of 105 mg/g) and pollutant adsorption. The system achieved high removal efficiencies in lab-scale tests: 97.4% for total VOCs (including 96.5–100% removal of recalcitrant alkanes and olefins), 91.3% for oils, and >88% for PM2.5/PM10. Mechanistic analysis indicated that the biofilm was dominated by Proteobacteria and Actinomycetes, and the synergistic effect between physical adsorption (via loofah’s porosity) and biodegradation (by microbial consortia) enabled stable performance (maintaining >90% efficiency over a 25-day operation) without observed secondary pollution. The loofah-activated sludge configuration demonstrated improved operational stability and the potential for lower operating costs compared to single-medium systems in this experimental setting. This work explores a promising, eco-friendly approach for treating simulated cooking fumes, utilizing renewable biomass carriers and biological processes, which could contribute to cleaner production strategies.
- Open Access
- 30 April 2025
- Published by MDPI AG in Sustainability
- Vol. 17 (9) , 4079
Loofah-Derived Adsorbent Column for Sustainable Purification of Oily Fumes: Synergistic Effect of Filtration and Adsorption
Loofah is deemed a promising candidate for the purification of oily fumes. Our research utilized H3PO4 for initial activation of loofah (TCS), producing loofahderived carbon (TGSC-0). Subsequently, Fenton’s reagent was utilized for further modification to yield loofah-derived carbon (TGSC-1). TGSC-1 was used in the form of an adsorption column to simultaneously treat multiple pollutants from oily fumes, with surface Fe3+, Fe2+, and H2O2 catalyzing ·OH and ·OOH generation to enhance adsorption of the oils and non-methane hydrocarbon (NMHC). Characterization showed that the specific surface area of TGSC-1 was 427.97 m2/g and pore sizes ranged from 0.50 to 3.50 nm. The rich mesoporous and macroporous structures of TGSC-1 enhanced the capability of carbon layer adsorption. Langmuir adsorption kinetics suggested that adsorption proceeded via monolayer adsorption pathways, while L-τ lines revealed shorter protective effect times for adsorbing PM10 and PM2.5 than for oils and NMHC. The results indicated that TGSC-1 exhibited maximum saturated adsorption capacities of 25.79, 13.02, 9.82, and 15.99 mg/g for oils, NMHC, PM2.5, and PM10, respectively. Increasing resistance of the adsorption column exhibited a notable synergistic effect of filtration and adsorption in treating oily fumes. It combines renewable materials with low-energy processing, delivering eco-economic benefits for sustainable development and application.
- 30 April 2025
- Published by MDPI AG in Sustainability
- Vol. 17 (9) , 4079
Open AccessLoofah-Derived Adsorbent Column for Sustainable Purification of Oily Fumes: Synergistic Effect of Filtration and Adsorption
Loofah is deemed a promising candidate for the purification of oily fumes. Our research utilized H3PO4 for initial activation of loofah (TCS), producing loofahderived carbon (TGSC-0). Subsequently, Fenton’s reagent was utilized for further modification to yield loofah-derived carbon (TGSC-1). TGSC-1 was used in the form of an adsorption column to simultaneously treat multiple pollutants from oily fumes, with surface Fe3+, Fe2+, and H2O2 catalyzing ·OH and ·OOH generation to enhance adsorption of the oils and non-methane hydrocarbon (NMHC). Characterization showed that the specific surface area of TGSC-1 was 427.97 m2/g and pore sizes ranged from 0.50 to 3.50 nm. The rich mesoporous and macroporous structures of TGSC-1 enhanced the capability of carbon layer adsorption. Langmuir adsorption kinetics suggested that adsorption proceeded via monolayer adsorption pathways, while L-τ lines revealed shorter protective effect times for adsorbing PM10 and PM2.5 than for oils and NMHC. The results indicated that TGSC-1 exhibited maximum saturated adsorption capacities of 25.79, 13.02, 9.82, and 15.99 mg/g for oils, NMHC, PM2.5, and PM10, respectively. Increasing resistance of the adsorption column exhibited a notable synergistic effect of filtration and adsorption in treating oily fumes. It combines renewable materials with low-energy processing, delivering eco-economic benefits for sustainable development and application.
- Open Access
- 8 June 2024
- Published by MDPI AG in Atmosphere
- Vol. 15 (6) , 696
Harmful Risk of Bioaerosol Pollution at Major Indoor Sites of a Summer Campus in Guilin City
Bioaerosols are a potential risk of infection in densely populated indoor sites at university campuses. In this study, indoor bioaerosols from the canteen, classroom, and dormitory on campus were sampled and analyzed in the summer of 2021 to investigate the harmful risk. The results showed that bacteria are the predominant microbes, and the total number of bacteria detected in the classroom during no lesson in the morning (33% of samples) and in the canteen during meal times (55% of samples) was greater than the World Health Organization’s recommended value (1000 CFU/m3). The ranges of respirable bioaerosol (<3.3 µm) contributions in the classroom, dormitory, and canteen were 50–75%, 57–70%, and 64–80%, respectively. Bacteroidetes and Firmicutes were the most dominant phyla in all three indoor environments, with a relative abundance of both above 20%. At the family level, Muribaculaceae, Lachnospiraceae, and Bacteroidaceae had high relative abundance in all indoor sites. Some of the microbes carried by bioaerosols were conditionally pathogenic bacteria, such as Micrococcaceae and Enterococcaceae, which may have a harmful risk of causing various inflammatory infections. The results of this study provide basic data to improve indoor environments and control indoor bioaerosol pollution on campus.
- 8 June 2024
- Published by MDPI AG in Atmosphere
- Vol. 15 (6) , 696
Open AccessHarmful Risk of Bioaerosol Pollution at Major Indoor Sites of a Summer Campus in Guilin City
Bioaerosols are a potential risk of infection in densely populated indoor sites at university campuses. In this study, indoor bioaerosols from the canteen, classroom, and dormitory on campus were sampled and analyzed in the summer of 2021 to investigate the harmful risk. The results showed that bacteria are the predominant microbes, and the total number of bacteria detected in the classroom during no lesson in the morning (33% of samples) and in the canteen during meal times (55% of samples) was greater than the World Health Organization’s recommended value (1000 CFU/m3). The ranges of respirable bioaerosol (<3.3 µm) contributions in the classroom, dormitory, and canteen were 50–75%, 57–70%, and 64–80%, respectively. Bacteroidetes and Firmicutes were the most dominant phyla in all three indoor environments, with a relative abundance of both above 20%. At the family level, Muribaculaceae, Lachnospiraceae, and Bacteroidaceae had high relative abundance in all indoor sites. Some of the microbes carried by bioaerosols were conditionally pathogenic bacteria, such as Micrococcaceae and Enterococcaceae, which may have a harmful risk of causing various inflammatory infections. The results of this study provide basic data to improve indoor environments and control indoor bioaerosol pollution on campus.