Radhika Sajja
Radhika Sajja has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Pradeep Dumpala
Department of Chemical Engineering, RVR & JC College of Engineering (A), Guntur, India
4 shared publications - Ratna Kumari Anantha
Department of Chemical Engineering, RVR & JC College of Engineering (A), Guntur, India
4 shared publications - Sobha Kota
Department of Chemical Engineering, RVR & JC College of Engineering (A), Guntur, India
4 shared publications - Chalamalasetti Srinivasa Rao
Department of Mechanical Engineering, Andhra University College of Engineering, Andhra University, Visakhapatnam, India
2 shared publications - Dhulipalla Swapna
R.V.R. & J.C. College of Engineering
2 shared publications - B. Sateesh
Vignan’s Institute of Information Technology (A)
1 shared publication
Latest Publications
- 11 September 2025
- Published by Springer Nature in 3 Biotech
- Vol. 15 (10) , 1-18
Multicomponent nanofibrous electrospun dressings, evaluated for the healing of full-thickness excision wounds in a porcine model
The first layer of the advanced wound dressing comprises a 3 mm layer of copper (oxide) nanoparticles synthesized with the leaf extracts of M. oleifera and Musa, mixed with Cochlospermum gossypium and Acacia arabica gums, and coated on the cotton fabric. By electrospinning at 20 kV, a 9-layered nanofibrous framework of the biopolymers cellulose acetate, gelatin, and marine chitosan, impregnated with bioactives such as carbon dots derived from medicinal plants, green synthesized copper nanoparticles, and phytochemicals extracted with acetone and isopropanol was woven. The core, shell and active layer nanofibers of different polymers, with a fiber diameter ranging from 252 nm to 3.1 µm, were grafted onto the CuNP-coated cotton fabric. Four wound dressings viz., WD1 (L)/WD2 (H) with poly l-lysine in low and high concentrations, and WD3 (L)/WD4 (H) with polyethylene oxide in low and high concentrations, were fabricated to improve the piezoelectric behavior. Of them, WD2 and WD4 showed promising biological characteristics of anti-inflammatory, anti-oxidant, and anti-microbial potential. They were endowed with piezoelectric constants of 24.28 pm/V (WD2) and 0.28 nm/V (WD4), and zeta potentials of 57.7 mV (WD2) and 94.6 mV (WD4). Within 8 days of causing full-thickness wounds, the two test items were able to effectively cause quick wound contraction, epithelial tissue regrowth, and elimination of inflammation; by 34 days, normalcy had returned.
- 11 September 2025
- Published by Springer Nature in 3 Biotech
- Vol. 15 (10) , 1-18
Multicomponent nanofibrous electrospun dressings, evaluated for the healing of full-thickness excision wounds in a porcine model
The first layer of the advanced wound dressing comprises a 3 mm layer of copper (oxide) nanoparticles synthesized with the leaf extracts of M. oleifera and Musa, mixed with Cochlospermum gossypium and Acacia arabica gums, and coated on the cotton fabric. By electrospinning at 20 kV, a 9-layered nanofibrous framework of the biopolymers cellulose acetate, gelatin, and marine chitosan, impregnated with bioactives such as carbon dots derived from medicinal plants, green synthesized copper nanoparticles, and phytochemicals extracted with acetone and isopropanol was woven. The core, shell and active layer nanofibers of different polymers, with a fiber diameter ranging from 252 nm to 3.1 µm, were grafted onto the CuNP-coated cotton fabric. Four wound dressings viz., WD1 (L)/WD2 (H) with poly l-lysine in low and high concentrations, and WD3 (L)/WD4 (H) with polyethylene oxide in low and high concentrations, were fabricated to improve the piezoelectric behavior. Of them, WD2 and WD4 showed promising biological characteristics of anti-inflammatory, anti-oxidant, and anti-microbial potential. They were endowed with piezoelectric constants of 24.28 pm/V (WD2) and 0.28 nm/V (WD4), and zeta potentials of 57.7 mV (WD2) and 94.6 mV (WD4). Within 8 days of causing full-thickness wounds, the two test items were able to effectively cause quick wound contraction, epithelial tissue regrowth, and elimination of inflammation; by 34 days, normalcy had returned.
- Open Access
- 28 December 2024
- Published by Springer Nature in Scientific Reports
- Vol. 14 (1) , 1-25
Investigation of functional characteristics of copper/copper oxide nanoparticles synthesized with Moringa oleifera and Musa sps. extracts: in-vitro and porcine study
The study analyzed the aqueous leaf extracts of Moringa oleifera and Musa sps. for phytochemical components, including flavonoids, sterols, saponins, tannins, and glycosides. The LC–MS analysis revealed gingerol, vicenin-2, caffeic acid, quercetin, and other compounds in the extracts. The synthesized MO- and MS- CuNPs (copper nanoparticles) exhibited plasmon resonance at 320 and 480 nm respectively, and Cu(II)-O stretching vibrations, manifested by their Fourier Transform Infrared (FT-IR) spectra. Thermogravimetric analysis showed that MO-/MS-CuNPs experienced a total weight loss of 80.2% and 68% respectively. Further, the EDS analysis revealed that MO-CuNPs have a copper content of 20%, while MS-CuNPs is 32%. The X-ray diffraction (XRD) patterns of the annealed MO and MS-CuNPs indicate the presence of both the cubic phase of copper (Cu) and the monoclinic tenorite phase of copper oxide (CuO). The percent DPPH scavenging activity of MO- and MS-CuNPs is 34.4 and 28.8, and by KMnO4 is 63.8 and 47.3% respectively. The behavior of CuNPs exhibited an asymmetrical response, with greater inhibition of Gram-negative bacteria compared to Gram-positive bacteria. CuNPs and medicinal plant-derived carbon dots were integrated into nanofibrous electrospun biopolymer scaffolds for wound care, demonstrating 100% wound healing in Yorkshire pigs full thickness excision wounds after 34 days.
- 28 December 2024
- Published by Springer Nature in Scientific Reports
- Vol. 14 (1) , 1-25
Open AccessInvestigation of functional characteristics of copper/copper oxide nanoparticles synthesized with Moringa oleifera and Musa sps. extracts: in-vitro and porcine study
The study analyzed the aqueous leaf extracts of Moringa oleifera and Musa sps. for phytochemical components, including flavonoids, sterols, saponins, tannins, and glycosides. The LC–MS analysis revealed gingerol, vicenin-2, caffeic acid, quercetin, and other compounds in the extracts. The synthesized MO- and MS- CuNPs (copper nanoparticles) exhibited plasmon resonance at 320 and 480 nm respectively, and Cu(II)-O stretching vibrations, manifested by their Fourier Transform Infrared (FT-IR) spectra. Thermogravimetric analysis showed that MO-/MS-CuNPs experienced a total weight loss of 80.2% and 68% respectively. Further, the EDS analysis revealed that MO-CuNPs have a copper content of 20%, while MS-CuNPs is 32%. The X-ray diffraction (XRD) patterns of the annealed MO and MS-CuNPs indicate the presence of both the cubic phase of copper (Cu) and the monoclinic tenorite phase of copper oxide (CuO). The percent DPPH scavenging activity of MO- and MS-CuNPs is 34.4 and 28.8, and by KMnO4 is 63.8 and 47.3% respectively. The behavior of CuNPs exhibited an asymmetrical response, with greater inhibition of Gram-negative bacteria compared to Gram-positive bacteria. CuNPs and medicinal plant-derived carbon dots were integrated into nanofibrous electrospun biopolymer scaffolds for wound care, demonstrating 100% wound healing in Yorkshire pigs full thickness excision wounds after 34 days.
- 23 October 2024
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
- Vol. 240 (4) , 4074-4082
A comprehensive validation of GRA with ant colony optimization for robust optimal design: A case study on the forming process
Sheet metal forming design involves numerous factors and controlling all these parameters to prevent cracks is a major challenge to maintain the quality. Therefore, the careful selection of process parameters is critical for ensuring product longevity. Several researchers employed different techniques for optimal selection of process parameters but consistency among the techniques and validation of results in real time scenarios will play a pivotal role in determining the suitable parameters. Therefore, the current work presents a validation method of Grey Relational Analysis (GRA) results with Ant Colony Optimization (ACO) for the robust optimum design with an illustrative example of forming process. Al 6061 – T6 alloy was chosen as a material for deep drawing process and L27 Orthogonal Array was planned to conduct experiments with four input parameters such as blank thickness, Die and Blank Temperature, Die Speed, Lubrication at three levels each. Punch force and Thickness variation were considered as the output parameters. GRA Technique was implemented to find the best optimal combination and regression equation was developed to predict the nature of objective function. These results were given as an input to ACO, a nature inspired algorithm to search for the optimal solution with in the design space. Sensitivity analysis has also been performed to highlight the effectiveness of the proposed solution in terms of solution quality and computational efficiency. The ACO method, GRA technique and the experimental results are almost similar with a margin of acceptable deviation. The results indicated the robustness of the projected approach in achieving the quality of solution.
- 23 October 2024
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
- Vol. 240 (4) , 4074-4082
A comprehensive validation of GRA with ant colony optimization for robust optimal design: A case study on the forming process
Sheet metal forming design involves numerous factors and controlling all these parameters to prevent cracks is a major challenge to maintain the quality. Therefore, the careful selection of process parameters is critical for ensuring product longevity. Several researchers employed different techniques for optimal selection of process parameters but consistency among the techniques and validation of results in real time scenarios will play a pivotal role in determining the suitable parameters. Therefore, the current work presents a validation method of Grey Relational Analysis (GRA) results with Ant Colony Optimization (ACO) for the robust optimum design with an illustrative example of forming process. Al 6061 – T6 alloy was chosen as a material for deep drawing process and L27 Orthogonal Array was planned to conduct experiments with four input parameters such as blank thickness, Die and Blank Temperature, Die Speed, Lubrication at three levels each. Punch force and Thickness variation were considered as the output parameters. GRA Technique was implemented to find the best optimal combination and regression equation was developed to predict the nature of objective function. These results were given as an input to ACO, a nature inspired algorithm to search for the optimal solution with in the design space. Sensitivity analysis has also been performed to highlight the effectiveness of the proposed solution in terms of solution quality and computational efficiency. The ACO method, GRA technique and the experimental results are almost similar with a margin of acceptable deviation. The results indicated the robustness of the projected approach in achieving the quality of solution.
- Open Access
- 7 June 2024
- Published by Springer Nature in Scientific Reports
- Vol. 14 (1) , 1-19
Heteroatom-doped carbon dots from medicinal plants as novel biomaterials for as-use biomedical applications in comparison with synthetic drug, zaltoprofen
FN-doped carbon dots were synthesized using powdered leaves of Moringa oleifera L./Chromolaena odorata L./Tridax procumbens L./Tinospora cordifolia L./ and Lantana camara L., along with a precursor called 4,5-difluoro-1,2-benzenediamine (DFBD) and compared against the drug zaltoprofen derived carbon dots. They were assessed for their optical and structural characteristics using photoluminescence (optimal emission λ of 600 nm), vibrational (FTIR) spectroscopy (characteristic wave numbers of 1156 and 1269 cm−1 for C–F), as well as X-ray diffraction (XRD) (highest intensity at 27.56°) and high-resolution transmission electron microscopy (HR-TEM) (particles in the size range of 15–20 nm). Further, field emission scanning electron microscopy (FESEM) / energy dispersive spectroscopy (EDX) indicated FN doping of oval/oblong carbon dots. Membrane protection in percent is found to be 55.3 and 80.4 for FN-CDs and Z-FN-CDs respectively. The DPPH-free radical scavenging activity by FN-CDs was 69.4%, while with Z-FN-CDs, it was 54.2%. When tested on six bacterial strains (three each for gram-positive and gram-negative), the FN-CDs displayed a halo (ZOI) between 9 and 19 mm, whereas the Z-FN-CDs displayed a clearance zone between 9 and 17 mm. The FN-CDs showed significant emission-red-shift effects and demonstrated concentration-dependent biocompatibility and viability in neuroblastoma and beta-TC6-cell lines.
- 7 June 2024
- Published by Springer Nature in Scientific Reports
- Vol. 14 (1) , 1-19
Open AccessHeteroatom-doped carbon dots from medicinal plants as novel biomaterials for as-use biomedical applications in comparison with synthetic drug, zaltoprofen
FN-doped carbon dots were synthesized using powdered leaves of Moringa oleifera L./Chromolaena odorata L./Tridax procumbens L./Tinospora cordifolia L./ and Lantana camara L., along with a precursor called 4,5-difluoro-1,2-benzenediamine (DFBD) and compared against the drug zaltoprofen derived carbon dots. They were assessed for their optical and structural characteristics using photoluminescence (optimal emission λ of 600 nm), vibrational (FTIR) spectroscopy (characteristic wave numbers of 1156 and 1269 cm−1 for C–F), as well as X-ray diffraction (XRD) (highest intensity at 27.56°) and high-resolution transmission electron microscopy (HR-TEM) (particles in the size range of 15–20 nm). Further, field emission scanning electron microscopy (FESEM) / energy dispersive spectroscopy (EDX) indicated FN doping of oval/oblong carbon dots. Membrane protection in percent is found to be 55.3 and 80.4 for FN-CDs and Z-FN-CDs respectively. The DPPH-free radical scavenging activity by FN-CDs was 69.4%, while with Z-FN-CDs, it was 54.2%. When tested on six bacterial strains (three each for gram-positive and gram-negative), the FN-CDs displayed a halo (ZOI) between 9 and 19 mm, whereas the Z-FN-CDs displayed a clearance zone between 9 and 17 mm. The FN-CDs showed significant emission-red-shift effects and demonstrated concentration-dependent biocompatibility and viability in neuroblastoma and beta-TC6-cell lines.
- Open Access
- 1 January 2022
- Published by Kare Publishing in Sigma Journal of Engineering and Natural Sciences
- Vol. 40 (4) , 742-754
Taguchi based GRA-PCA hybrid optimization for the forming of AL6061 alloy in automotive applications
Current study researches the impact of material and forming factors on punch force and sheet thickness in sheet forming of Aluminum 6061 composites. The particular properties of aluminum make it the most excellent candidate to replace the heavier materials in the vehicles which act as reaction to the mass drop interest inside the car area. As of now, the high-heat treatable composites Al 6000 series alloys are applied to broad applications. The forming tests were directed depending upon L27 orthogonal array (OA) planned by taking into account about temperature, die speed, sheet thickness and type of lubricant as input for process parameters. Multi target improvement was done to decide the individual significance of every reaction through Taguchi based Grey Relational Analysis (GRA) along with Principal Component Analysis. The procedure provide the ideal parameter condition for example sheet thickness of 2mm, die and blank temperature of 300oC, die speed of 0.4 mm/s , with Boric Acid lubrication that results in 25.96% decrease in Punch power and thinning improved by 50.74%. ANOVA is valuable to make out the significance and furthermore the result of each cycle factors on response parameters. Though, considerably all the parameters play important role, the die and blank temperature affects 80.11% of the reaction parameters as that of forming factors whereas die speed turned to be the slightest significant factor. Confirmation test was performed for approving the best blend.
- 1 January 2022
- Published by Kare Publishing in Sigma Journal of Engineering and Natural Sciences
- Vol. 40 (4) , 742-754
Open AccessTaguchi based GRA-PCA hybrid optimization for the forming of AL6061 alloy in automotive applications
Current study researches the impact of material and forming factors on punch force and sheet thickness in sheet forming of Aluminum 6061 composites. The particular properties of aluminum make it the most excellent candidate to replace the heavier materials in the vehicles which act as reaction to the mass drop interest inside the car area. As of now, the high-heat treatable composites Al 6000 series alloys are applied to broad applications. The forming tests were directed depending upon L27 orthogonal array (OA) planned by taking into account about temperature, die speed, sheet thickness and type of lubricant as input for process parameters. Multi target improvement was done to decide the individual significance of every reaction through Taguchi based Grey Relational Analysis (GRA) along with Principal Component Analysis. The procedure provide the ideal parameter condition for example sheet thickness of 2mm, die and blank temperature of 300oC, die speed of 0.4 mm/s , with Boric Acid lubrication that results in 25.96% decrease in Punch power and thinning improved by 50.74%. ANOVA is valuable to make out the significance and furthermore the result of each cycle factors on response parameters. Though, considerably all the parameters play important role, the die and blank temperature affects 80.11% of the reaction parameters as that of forming factors whereas die speed turned to be the slightest significant factor. Confirmation test was performed for approving the best blend.