K. Narayan Prabhu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
K. Narayan Prabhu has a total of 1 co-authors. Here are the top co-authors by number of shared publications:
John Campbell
IRC in Materials for High Performance Applications, University of Birmingham, Edgbaston, Birmingham B15 2TT, United Kingdom
1 shared publication
Latest Publications
- 29 November 1999
- Published by Taylor & Francis in International Journal of Cast Metals Research
- Vol. 12 (3) , 137-143
Investigation of casting/chill interfacial heat transfer during solidification of Al-11% Si alloy by inverse modelling and real-time x-ray imaging
Heat transfer at the casting/chill interface during solidification of Al-11% Si eutectic alloy (LM 6) was investigated. Experiments were carried out for various combinations of chill thickness, casting height and chill material. The thermal history at nodal locations in the chill was used to estimate the interfacial heat flux by inverse modelling. A new parameter called the heat flux penetration time was proposed to model the transformation of the interfacial condition from a perfect contact to a nonconforming contact. The heat transfer coefficient was modelled as a function of the chill thickness, casting height and the thermal diffusivity of the chill material. Real time x-ray imaging technique was adopted to observe the casting/chill interface during solidification of the alloy. The video pictures indicate that a gas gap forms in the case of thin chills. The formation of the gap in thick chills could not be detected. The widths of the gap formed at the interface were measured by an image analyser which revealed that the width of the gap not only varies with time but also with position along the chill surface.
- 29 November 1999
- Published by Taylor & Francis in International Journal of Cast Metals Research
- Vol. 12 (3) , 137-143
Investigation of casting/chill interfacial heat transfer during solidification of Al-11% Si alloy by inverse modelling and real-time x-ray imaging
Heat transfer at the casting/chill interface during solidification of Al-11% Si eutectic alloy (LM 6) was investigated. Experiments were carried out for various combinations of chill thickness, casting height and chill material. The thermal history at nodal locations in the chill was used to estimate the interfacial heat flux by inverse modelling. A new parameter called the heat flux penetration time was proposed to model the transformation of the interfacial condition from a perfect contact to a nonconforming contact. The heat transfer coefficient was modelled as a function of the chill thickness, casting height and the thermal diffusivity of the chill material. Real time x-ray imaging technique was adopted to observe the casting/chill interface during solidification of the alloy. The video pictures indicate that a gas gap forms in the case of thin chills. The formation of the gap in thick chills could not be detected. The widths of the gap formed at the interface were measured by an image analyser which revealed that the width of the gap not only varies with time but also with position along the chill surface.