Bingying Guo

This study presents an adaptive integrated chassis control strategy for enhancing vehicle stability under different road conditions, specifically through the real-time estimation of tire cornering stiffness. A hierarchical control architecture is developed, combining active front steering (AFS) and direct yaw moment control (DYC). A recursive regularized weighted least squares algorithm is designed to estimate tire cornering stiffness from measurable vehicle states, eliminating the need for additional tire sensors. Leveraging this estimation, an adaptive sliding mode controller (ASMC) is proposed in the upper layer, where a novel self-tuning mechanism adjusts control parameters based on tire saturation levels and cornering stiffness variation trends. The lower-layer controller employs a weighted least squares allocation method to distribute control efforts while respecting physical and friction constraints. Co-simulations using MATLAB 2018a/Simulink and CarSim validate the effectiveness of the proposed framework under both high- and low-friction scenarios. Compared with conventional ASMC and DYC strategies, the proposed controller exhibits improved robustness, reduced sideslip, and enhanced trajectory tracking performance. The results demonstrate the significance of the real-time integration of tire dynamics into chassis control in improving vehicle handling and stability.

A coordinated control of front/rear traction, four-wheel independent braking, and an active roll control system is proposed in this paper to improve overall vehicle cornering performance. The control algorithm is structured in a hierarchical form: the supervisory controller is used to calculate the desired yaw rate and roll angle based on the driver input and vehicle states; the upper-level controller is utilized to decide the target longitudinal tire forces, yaw moment, and anti-roll moment based on the sliding mode control method; and the control allocator is used to optimally map the virtual control input to the control commands of specific actuators. Co-simulations of MATLAB/Simulink and CarSim were conducted to verify the performance enhancement of the proposed controller. The results suggest that the proposed controller can effectively enhance the driving performance in limit cornering while maintaining lateral stability, and it reduces tire usage, as indicated by the index of tire dissipation energy when compared to control methods such as AWD, AWD-ESC, and ICC.

Intelligent truck platoons can benefit road transportation due to the short gap and better fuel economy, but they are also subject to dynamic uncertainties and external disturbances. Therefore, this paper develops a novel robust control algorithm for connected truck platoons. By introducing a linearized expression method of platoon error dynamics based on state measurement, the state feedback mechanism combined with a nonsmooth controller for a truck platoon is proposed in the development of the distributed control method. The state-feedback controller can drive the nominal platoon system to the state of second-order consensus, and the nonsmooth controller counterparts the uncertainties and disturbances. The convergence and string stability of the proposed control algorithm are demonstrated both theoretically and experimentally, and the effectiveness and robustness are also verified by simulation tests.