Sopa Cansee
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Sopa Cansee has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
Sarawut Saenkham
4 shared publications- Siripuk Suraporn
Department of Biology, Faculty of Science, Mahasarakham University, Kantarawichai District, Maha Sarakham 44150, Thailand
4 shared publications Shenghua Hu
3 shared publicationsTeerasad Kanasri
3 shared publications- Anuwat Saenpong
Department of Mechanical and Mechatronics Engineering, Faculty of Engineering and Industrial Technology, Kalasin University, Kalasin 46000, Thailand
2 shared publications - Chinnapat Takakarn
Department of Mechanical and Mechatronics Engineering, Faculty of Engineering and Industrial Technology, Kalasin University, Kalasin 46000, Thailand
2 shared publications
Latest Publications
- Open Access
Drying Kinetics, Apparent Moisture Diffusivity, and Energy Performance of Black Soldier Fly Larvae in a Rotating-Tray Hot-Air Dryer
Fresh black soldier fly larvae (BSFL) have a high moisture content that complicates storage and requires energy-intensive postharvest drying. This study evaluated the effects of drying-air temperature and tray rotation speed on BSFL drying kinetics, energy performance, and moisture transport in a rotating-tray hot-air dryer. A 3 × 3 factorial experiment was conducted at 50, 60, and 70 °C and tray rotation speeds of 0, 5, and 10 rpm, with three independent replicates, while drying-air velocity was maintained at 3.0 m s−1. Drying time decreased from 31.0 h at 50 °C and 0 rpm to 6.5 h at 70 °C and 10 rpm. The latter condition achieved the highest drying efficiency (49.11%) and lowest specific energy consumption (4.60 MJ kg−1 water removed). Comparable values were obtained at 60 °C and 10 rpm (49.07% and 4.61 MJ kg−1 water removed, respectively). Among nine thin-layer models evaluated for the six rotating-tray treatments at 5 and 10 rpm, the Midilli model provided the best fit. Apparent effective moisture diffusivity ( increased from 0.2457 × 10−9 to 1.2946 × 10−9 m2 s−1, while apparent activation energy ranged from 67.39 to 68.46 kJ mol−1. Rotating-tray drying accelerated BSFL dehydration and improved engineering performance; however, microbial safety and product quality require separate evaluation before food or feed recommendations can be made.Open AccessDrying Kinetics, Apparent Moisture Diffusivity, and Energy Performance of Black Soldier Fly Larvae in a Rotating-Tray Hot-Air Dryer
Fresh black soldier fly larvae (BSFL) have a high moisture content that complicates storage and requires energy-intensive postharvest drying. This study evaluated the effects of drying-air temperature and tray rotation speed on BSFL drying kinetics, energy performance, and moisture transport in a rotating-tray hot-air dryer. A 3 × 3 factorial experiment was conducted at 50, 60, and 70 °C and tray rotation speeds of 0, 5, and 10 rpm, with three independent replicates, while drying-air velocity was maintained at 3.0 m s−1. Drying time decreased from 31.0 h at 50 °C and 0 rpm to 6.5 h at 70 °C and 10 rpm. The latter condition achieved the highest drying efficiency (49.11%) and lowest specific energy consumption (4.60 MJ kg−1 water removed). Comparable values were obtained at 60 °C and 10 rpm (49.07% and 4.61 MJ kg−1 water removed, respectively). Among nine thin-layer models evaluated for the six rotating-tray treatments at 5 and 10 rpm, the Midilli model provided the best fit. Apparent effective moisture diffusivity ( increased from 0.2457 × 10−9 to 1.2946 × 10−9 m2 s−1, while apparent activation energy ranged from 67.39 to 68.46 kJ mol−1. Rotating-tray drying accelerated BSFL dehydration and improved engineering performance; however, microbial safety and product quality require separate evaluation before food or feed recommendations can be made. - Open Access
- 1 May 2026
- Published by Elsevier in Journal of Hydrology: Regional Studies
- Vol. 65
Optimizing flood susceptibility mapping using GIS-based frequency ratio and analytic hierarchy process: A case study in Thailand
- 1 May 2026
- Published by Elsevier in Journal of Hydrology: Regional Studies
- Vol. 65
Open AccessOptimizing flood susceptibility mapping using GIS-based frequency ratio and analytic hierarchy process: A case study in Thailand
- Open Access
Optimizing Vibratory Sorting Machine of Crickets: Effects of Surface Friction, Oscillation Dynamics, and Energy Consumption
This study presents a two-stage, mechanics-based method for optimizing vibratory sorting machine of adult crickets for post-harvest size grading. In the first stage, the static coefficient of friction (COF) was measured for three cricket size classes across seven tray surface conditions to quantify cricket–substrate interactions relevant to vibratory transport. COF varied significantly with both morphology and surface microtexture (p < 0.0001), with intermediate roughness levels generating higher friction than smooth or highly rough surfaces. In the second stage, a factorial experiment evaluated the effects of oscillating speed (300–350 rpm), tray inclination (2°–3°), and surface roughness (G0–G5) on sorting efficiency, throughput, batch sorting time, and specific energy consumption (SEC). All main factors and most interactions significantly influenced sorting performance (p < 0.0001). The optimal operating condition—350 rpm, 2° inclination, and G2 roughness—achieved 95% sorting accuracy, 39 crickets·min−1 throughput, and the lowest SEC (0.37 Wh·cricket−1). The results demonstrate that friction–vibration coupling governs cricket transport on vibrating surfaces and provide an engineering framework for designing scalable, energy-efficient sorting systems for insect rearing and processing.
Open AccessOptimizing Vibratory Sorting Machine of Crickets: Effects of Surface Friction, Oscillation Dynamics, and Energy Consumption
This study presents a two-stage, mechanics-based method for optimizing vibratory sorting machine of adult crickets for post-harvest size grading. In the first stage, the static coefficient of friction (COF) was measured for three cricket size classes across seven tray surface conditions to quantify cricket–substrate interactions relevant to vibratory transport. COF varied significantly with both morphology and surface microtexture (p < 0.0001), with intermediate roughness levels generating higher friction than smooth or highly rough surfaces. In the second stage, a factorial experiment evaluated the effects of oscillating speed (300–350 rpm), tray inclination (2°–3°), and surface roughness (G0–G5) on sorting efficiency, throughput, batch sorting time, and specific energy consumption (SEC). All main factors and most interactions significantly influenced sorting performance (p < 0.0001). The optimal operating condition—350 rpm, 2° inclination, and G2 roughness—achieved 95% sorting accuracy, 39 crickets·min−1 throughput, and the lowest SEC (0.37 Wh·cricket−1). The results demonstrate that friction–vibration coupling governs cricket transport on vibrating surfaces and provide an engineering framework for designing scalable, energy-efficient sorting systems for insect rearing and processing.
- Open Access
- 7 February 2026
- Published by Elsevier in Results in Engineering
- Vol. 29
Effect of tray elevation and cassava load on solar drying performance, energy efficiency, and drying kinetics
- 7 February 2026
- Published by Elsevier in Results in Engineering
- Vol. 29
Open AccessEffect of tray elevation and cassava load on solar drying performance, energy efficiency, and drying kinetics
- Open Access
- 13 November 2025
- Published by EDP Sciences in E3S Web of Conferences
- Vol. 661, 04002
Performance Optimization of Cassava Chip Drying Using Greenhouse-Integrated Hot Air Systems for Industrial Applications
This study aimed to optimize the drying performance of cassava chips using a greenhouse-integrated hot air drying system and compare its effectiveness against natural sun drying and an elevated-floor technique. Experiments were conducted using four chip sizes (2.5 to 4.0 cm) and four drying-bed thicknesses (2 to 8 cm), drying behavior, drying rate, thermal efficiency, and specific energy consumption (SEC) were analyzed at hot air temperatures of 40 °C, 50 °C, and 60 °C. The results indicated that the optimal configuration—chips <2.5 cm with a 2 cm bed thickness at 60 °C—achieved a drying time of 10 h, reducing drying duration by 56.5% and lowering SRC from 9.30 MJ/kg to 4.41 MJ/kg compared to sun drying. The maximum thermal efficiency of 71.60% was achieved with greenhouse-assisted drying. This improvement translates to a 1.36kWh/kg energy saving and a CO2 reduction of 0.82 kg per kg of water removed. This system offers a promising energy-efficient and climate-resilient solution for industrial cassava drying in tropical regions.
- 13 November 2025
- Published by EDP Sciences in E3S Web of Conferences
- Vol. 661, 04002
Open AccessPerformance Optimization of Cassava Chip Drying Using Greenhouse-Integrated Hot Air Systems for Industrial Applications
This study aimed to optimize the drying performance of cassava chips using a greenhouse-integrated hot air drying system and compare its effectiveness against natural sun drying and an elevated-floor technique. Experiments were conducted using four chip sizes (2.5 to 4.0 cm) and four drying-bed thicknesses (2 to 8 cm), drying behavior, drying rate, thermal efficiency, and specific energy consumption (SEC) were analyzed at hot air temperatures of 40 °C, 50 °C, and 60 °C. The results indicated that the optimal configuration—chips <2.5 cm with a 2 cm bed thickness at 60 °C—achieved a drying time of 10 h, reducing drying duration by 56.5% and lowering SRC from 9.30 MJ/kg to 4.41 MJ/kg compared to sun drying. The maximum thermal efficiency of 71.60% was achieved with greenhouse-assisted drying. This improvement translates to a 1.36kWh/kg energy saving and a CO2 reduction of 0.82 kg per kg of water removed. This system offers a promising energy-efficient and climate-resilient solution for industrial cassava drying in tropical regions.
- Open Access
Enhancing Food Production by Sustainable Cricket Farming in Thailand: Evaluating Black Soldier Fly Larvae as a Cost-Effective Feed Ingredient
The high cost of commercial feed presents a major barrier to scaling environmentally responsible cricket (Acheta domesticus) farming, particularly in low-resource settings. We investigated the use of Hermetia illucens (Black Soldier Fly Larvae, BSFL) combined with locally available ingredients to develop affordable, nutritionally balanced feed for A. domesticus. A three-phase experimental approach was used: (i) feed preference assessment from six ingredients; (ii) performance evaluation of four BSFL-to-commercial feed ratios; and (iii) formulation and testing of three practical recipes using Pearson’s square method. Feed efficiency was measured via feed conversion ratio (FCR), efficiency of conversion of ingested food (ECI), and yield. A recipe consisting of 20.6% BSFL, 14.6% soybean meal, 29.1% corn meal, 17.8% rice meal, and 17.8% commercial feed achieved the best performance with an FCR of 2.2, ECI of 44.4%, and juvenile larvae yield of 99.9%. This formulation also reduced feed cost by 33% compared to commercial feed. The study confirmed that integrating BSFL with regionally sourced materials using a simple feed design method can enhance food security, reduce input costs, and support the transition toward circular insect farming systems.
Open AccessEnhancing Food Production by Sustainable Cricket Farming in Thailand: Evaluating Black Soldier Fly Larvae as a Cost-Effective Feed Ingredient
The high cost of commercial feed presents a major barrier to scaling environmentally responsible cricket (Acheta domesticus) farming, particularly in low-resource settings. We investigated the use of Hermetia illucens (Black Soldier Fly Larvae, BSFL) combined with locally available ingredients to develop affordable, nutritionally balanced feed for A. domesticus. A three-phase experimental approach was used: (i) feed preference assessment from six ingredients; (ii) performance evaluation of four BSFL-to-commercial feed ratios; and (iii) formulation and testing of three practical recipes using Pearson’s square method. Feed efficiency was measured via feed conversion ratio (FCR), efficiency of conversion of ingested food (ECI), and yield. A recipe consisting of 20.6% BSFL, 14.6% soybean meal, 29.1% corn meal, 17.8% rice meal, and 17.8% commercial feed achieved the best performance with an FCR of 2.2, ECI of 44.4%, and juvenile larvae yield of 99.9%. This formulation also reduced feed cost by 33% compared to commercial feed. The study confirmed that integrating BSFL with regionally sourced materials using a simple feed design method can enhance food security, reduce input costs, and support the transition toward circular insect farming systems.
- Open Access
- 15 July 2025
- Published by Elsevier in Energy Nexus
- Vol. 19
Performance optimization of natural updraft gasifier stoves: Impact of air hole configuration and biomass fuel characteristics on combustion efficiency
- 15 July 2025
- Published by Elsevier in Energy Nexus
- Vol. 19
Open AccessPerformance optimization of natural updraft gasifier stoves: Impact of air hole configuration and biomass fuel characteristics on combustion efficiency
- Open Access
- 4 July 2025
- Published by MDPI AG in Preprints.org
Enhancing Food Production for Sustainable Cricket Farming: Evaluating Black Soldier Fly Larvae as a Cost-Effective Feed Ingredient
Cricket farming is recognized as a sustainable solution for addressing global protein shortages, yet feed costs remain a major barrier to scalability. This study evaluated the use of locally available ingredients and black soldier fly larvae to formulate cost-effective diets for house crickets (Acheta domesticus). A preference test was conducted to determine the most palatable ingredients, followed by feeding trials to measure feed conversion ratio, efficiency of conversion of ingested food, and yield weight. Three experimental feed recipes were developed using the Pearson’s square method and compared to a commercial feed. The recipe containing 20.61% black soldier fly larvae and 17.86% commercial feed demonstrated the highest performance in juvenile and adult crickets, achieving yields of 99.89% and 91.0%, respectively, while reducing feed costs by 33.25%. Results showed that high-performance cricket feed can be produced by combining insect-based protein with local plant materials, without compromising growth efficiency. The findings suggest a practical pathway for small-scale farmers to reduce production costs and promote environmentally sustainable insect farming systems.
- 4 July 2025
- Published by MDPI AG in Preprints.org
Open AccessEnhancing Food Production for Sustainable Cricket Farming: Evaluating Black Soldier Fly Larvae as a Cost-Effective Feed Ingredient
Cricket farming is recognized as a sustainable solution for addressing global protein shortages, yet feed costs remain a major barrier to scalability. This study evaluated the use of locally available ingredients and black soldier fly larvae to formulate cost-effective diets for house crickets (Acheta domesticus). A preference test was conducted to determine the most palatable ingredients, followed by feeding trials to measure feed conversion ratio, efficiency of conversion of ingested food, and yield weight. Three experimental feed recipes were developed using the Pearson’s square method and compared to a commercial feed. The recipe containing 20.61% black soldier fly larvae and 17.86% commercial feed demonstrated the highest performance in juvenile and adult crickets, achieving yields of 99.89% and 91.0%, respectively, while reducing feed costs by 33.25%. Results showed that high-performance cricket feed can be produced by combining insect-based protein with local plant materials, without compromising growth efficiency. The findings suggest a practical pathway for small-scale farmers to reduce production costs and promote environmentally sustainable insect farming systems.
- Open Access
- 29 November 2024
- Published by Elsevier in Case Studies in Thermal Engineering
- Vol. 65
Optimizing infrared drying of black soldier fly larvae for sustainable cricket feed production
- 29 November 2024
- Published by Elsevier in Case Studies in Thermal Engineering
- Vol. 65
Open AccessOptimizing infrared drying of black soldier fly larvae for sustainable cricket feed production
- Open Access
- 11 June 2024
- Published by MDPI AG in Agriculture
- Vol. 14 (6) , 924
Lactic Acid Bacteria from Bombyx mori Frass: Probiotic Properties and Antagonistic Activities
Insect farming is gaining attention as a promising area for exploring probiotic bacteria, which can benefit both insect health and various industries. Silkworm farming is a key industry in Thailand; however, challenges such as disease susceptibility and optimising growth require innovative solutions for sustainable practices. Our study addresses this by assessing lactic acid bacteria (LAB) in native Thai silkworm faeces, which accumulate as natural by-products during the rearing process. We conducted biochemical tests, including those for catalase, haemolytic activity, bile salt tolerance, antimicrobial activity, antibiotic susceptibility, and cell surface hydrophobicity, along with taxonomic classification. Out of 102 isolates, eight potential probiotics were selected, with five showing strong probiotic traits like acid and bile salt tolerance and cell surface hydrophobicity, enhancing gut survivability. These isolates also displayed antagonistic activity against pathogens like Staphylococcus aureus, Salmonella typhimurium, Escherichia coli, and Pseudomonas aeruginosa. Safety assessments confirmed their safety, with no haemolytic activity and sensitivity to antibiotics like chloramphenicol and amoxicillin. These LAB isolates (SP04, SP06, SP44, SP64, and SP67), identified as Enterococcus faecalis strain NBRC 100481, show promise as in vitro probiotics for silkworm rearing, calling for further in vivo evaluation.
- 11 June 2024
- Published by MDPI AG in Agriculture
- Vol. 14 (6) , 924
Open AccessLactic Acid Bacteria from Bombyx mori Frass: Probiotic Properties and Antagonistic Activities
Insect farming is gaining attention as a promising area for exploring probiotic bacteria, which can benefit both insect health and various industries. Silkworm farming is a key industry in Thailand; however, challenges such as disease susceptibility and optimising growth require innovative solutions for sustainable practices. Our study addresses this by assessing lactic acid bacteria (LAB) in native Thai silkworm faeces, which accumulate as natural by-products during the rearing process. We conducted biochemical tests, including those for catalase, haemolytic activity, bile salt tolerance, antimicrobial activity, antibiotic susceptibility, and cell surface hydrophobicity, along with taxonomic classification. Out of 102 isolates, eight potential probiotics were selected, with five showing strong probiotic traits like acid and bile salt tolerance and cell surface hydrophobicity, enhancing gut survivability. These isolates also displayed antagonistic activity against pathogens like Staphylococcus aureus, Salmonella typhimurium, Escherichia coli, and Pseudomonas aeruginosa. Safety assessments confirmed their safety, with no haemolytic activity and sensitivity to antibiotics like chloramphenicol and amoxicillin. These LAB isolates (SP04, SP06, SP44, SP64, and SP67), identified as Enterococcus faecalis strain NBRC 100481, show promise as in vitro probiotics for silkworm rearing, calling for further in vivo evaluation.