Meiping Zhu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Meiping Zhu has a total of 85 co-authors. Here are the top co-authors by number of shared publications:
Jianda Shao
State Key Laboratory of Ultra-Intense Laser Science and Technology, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences 1 , Shanghai 201800
15 shared publications- Jianda Shao
Laboratory of Thin Film Optics Shanghai Institute of Optics and Fine Mechanics Chinese Academy of Science Shanghai China
9 shared publications Jian Sun
State Key Laboratory of Ultra-Intense Laser Science and Technology, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences 1 , Shanghai 201800
7 shared publicationsKui Yi
7 shared publicationsWenyun Du
6 shared publicationsYingjie Chai
CREOL, College of Optics and Photonics, University of Central Florida, Orlando, USA
5 shared publications
Latest Publications
- 24 July 2026
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 140 (4)
Enhancing laser-induced damage threshold of picosecond laser mirrors using graded-refractive-index multilayer structures
Graded-refractive-index (n) multilayer architectures are examined as a means of improving the laser-induced damage threshold (LIDT) of picosecond laser mirrors. The Al2O3 and Al2O3/HfO2 nano-laminates are employed as high-n materials to form a mirror structure, where the n values of the high-n layers gradually increase along the direction of the electric-field attenuation. Compared with a conventional M-Constant mirror based on a fixed-n Al2O3–HfO2 mixture, the M-Graded mirror shows a 1.49-fold increase in LIDT under picosecond laser irradiation, while the reflection bandwidth above 99.5% reflectivity decreases by only ∼6.9%. Observation of laser-induced damage sites indicates that damage initiation is mainly associated with nanoscale absorbing defects on the coating surface, suggesting that redistribution of the material composition profile through graded-refractive-index multilayers helps suppress damage and improve the LIDT of high-power picosecond laser mirrors.
- 24 July 2026
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 140 (4)
Enhancing laser-induced damage threshold of picosecond laser mirrors using graded-refractive-index multilayer structures
Graded-refractive-index (n) multilayer architectures are examined as a means of improving the laser-induced damage threshold (LIDT) of picosecond laser mirrors. The Al2O3 and Al2O3/HfO2 nano-laminates are employed as high-n materials to form a mirror structure, where the n values of the high-n layers gradually increase along the direction of the electric-field attenuation. Compared with a conventional M-Constant mirror based on a fixed-n Al2O3–HfO2 mixture, the M-Graded mirror shows a 1.49-fold increase in LIDT under picosecond laser irradiation, while the reflection bandwidth above 99.5% reflectivity decreases by only ∼6.9%. Observation of laser-induced damage sites indicates that damage initiation is mainly associated with nanoscale absorbing defects on the coating surface, suggesting that redistribution of the material composition profile through graded-refractive-index multilayers helps suppress damage and improve the LIDT of high-power picosecond laser mirrors.
- Open Access
- 12 June 2026
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 59 (23) , 235303
Experimental and simulation research on the dynamic characteristics of water vapor in high-vacuum systems
Water vapor is the primary residual gas in high-vacuum systems, which makes understanding its dynamic behavior critically important. This study used the static pressure rise method to experimentally investigate the external leakage rate of a vacuum system and to obtain water vapor pumping curves under four different chamber configurations. Models based on Langmuir and Freundlich adsorption theories were then developed to simulate the integrated adsorption and desorption processes and the corresponding leakage effects. The results indicate that the Freundlich model, which accounts for surface heterogeneity, provides a more accurate simulation of water vapor pumping behavior during the initial pumping and high-vacuum stages. This simulation model was further used to examine the influence of internal components on the spatial distribution of water vapor pressure and to quantify the effects of varying leakage rates and leak hole distributions on the local water vapor pressure.
- 12 June 2026
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 59 (23) , 235303
Open AccessExperimental and simulation research on the dynamic characteristics of water vapor in high-vacuum systems
Water vapor is the primary residual gas in high-vacuum systems, which makes understanding its dynamic behavior critically important. This study used the static pressure rise method to experimentally investigate the external leakage rate of a vacuum system and to obtain water vapor pumping curves under four different chamber configurations. Models based on Langmuir and Freundlich adsorption theories were then developed to simulate the integrated adsorption and desorption processes and the corresponding leakage effects. The results indicate that the Freundlich model, which accounts for surface heterogeneity, provides a more accurate simulation of water vapor pumping behavior during the initial pumping and high-vacuum stages. This simulation model was further used to examine the influence of internal components on the spatial distribution of water vapor pressure and to quantify the effects of varying leakage rates and leak hole distributions on the local water vapor pressure.
- 20 May 2026
- Published by Optica Publishing Group in Optical Materials Express
- Vol. 16 (6) , 1715
Feature-driven three-stage hybrid model for thin film parameter estimation from XRR curves
Neural network-based models offer a promising approach for X-ray reflectivity (XRR) prediction, enabling millisecond-scale estimation of thin film parameters. However, their accuracy is often limited by the non-uniqueness of solutions. To address this challenge, we propose a three-stage hybrid network model comprising an XRR curve feature extraction module, a neural network prediction module, and an interior-point method optimization module. Experimental results on Mo/Si bilayer thin films show that, compared to a traditional single-stage network model trained on raw XRR curves, the proposed three-stage model significantly reduces ε R (defined as the mean squared error between predicted and measured XRR curves). Specifically, when evaluated on experimentally measured data, the model lowers ε R to approximately 37.8% at the second stage and further reduces it to around 12.9% at the third stage.
- 20 May 2026
- Published by Optica Publishing Group in Optical Materials Express
- Vol. 16 (6) , 1715
Feature-driven three-stage hybrid model for thin film parameter estimation from XRR curves
Neural network-based models offer a promising approach for X-ray reflectivity (XRR) prediction, enabling millisecond-scale estimation of thin film parameters. However, their accuracy is often limited by the non-uniqueness of solutions. To address this challenge, we propose a three-stage hybrid network model comprising an XRR curve feature extraction module, a neural network prediction module, and an interior-point method optimization module. Experimental results on Mo/Si bilayer thin films show that, compared to a traditional single-stage network model trained on raw XRR curves, the proposed three-stage model significantly reduces ε R (defined as the mean squared error between predicted and measured XRR curves). Specifically, when evaluated on experimentally measured data, the model lowers ε R to approximately 37.8% at the second stage and further reduces it to around 12.9% at the third stage.
- 30 March 2026
- Published by Elsevier in Applied Surface Science
- Vol. 736
Improving the performance of Mo/Si/C multilayers through selective substrate bias-assistance
- 30 March 2026
- Published by Elsevier in Applied Surface Science
- Vol. 736
Improving the performance of Mo/Si/C multilayers through selective substrate bias-assistance
- 9 March 2026
- Published by Optica Publishing Group in Optical Materials Express
- Vol. 16 (4) , 830
Effects of the electric field and optical bandgap on femtosecond laser-induced damage of composite low-dispersion mirrors
The continual development of petawatt (PW) laser systems has led to increasingly high requirements for the damage threshold of broadband low-dispersion mirrors (BLDMs). The femtosecond laser-induced damage threshold (LIDT) is closely related to the intrinsic properties of the coating materials. Given the limitation of the intrinsic optical bandgap of materials, it is difficult to improve the LIDT using traditional Bragg structures. This study analyzed the effects of the electric field and the optical bandgap on the femtosecond laser-induced damage threshold of BLDMs. On this basis, a (HfO 2 -SiO 2 )/Ta 2 O 5 /SiO 2 BLDM was proposed, which can achieve high reflectance and low group delay dispersion in the spectral range of 800 nm ± 48 nm for p-polarization. This BLDM uses HfO 2 -SiO 2 mixture materials with different mixing ratios as high-refractive-index materials in the upper layers and simultaneously optimizes the electric-field distribution. Compared with the traditional HfO 2 /Ta 2 O 5 /SiO 2 BLDM with Bragg structure, the LIDT of this novel BLDM is elevated from 0.31 J/cm 2 to 0.49 J/cm 2 , irradiated by a p-polarized 40 fs laser pulse at an incident angle of 45°. This means that the LIDT improved by 58%. The damage morphology and calculated equivalent integral electric field distribution results indicate that damage occurs at the location with the maximum electric field intensity in high-refractive-index material. This study demonstrates that the femtosecond LIDT of BLDMs can be enhanced not only by electric field optimization but also by utilizing high-optical-bandgap mixture coatings. By combining these two approaches, the damage threshold of the BLDM developed in this study has been significantly improved. This study presents a new approach for enhancing the LIDT of BLDMs in the femtosecond regime.
- 9 March 2026
- Published by Optica Publishing Group in Optical Materials Express
- Vol. 16 (4) , 830
Effects of the electric field and optical bandgap on femtosecond laser-induced damage of composite low-dispersion mirrors
The continual development of petawatt (PW) laser systems has led to increasingly high requirements for the damage threshold of broadband low-dispersion mirrors (BLDMs). The femtosecond laser-induced damage threshold (LIDT) is closely related to the intrinsic properties of the coating materials. Given the limitation of the intrinsic optical bandgap of materials, it is difficult to improve the LIDT using traditional Bragg structures. This study analyzed the effects of the electric field and the optical bandgap on the femtosecond laser-induced damage threshold of BLDMs. On this basis, a (HfO 2 -SiO 2 )/Ta 2 O 5 /SiO 2 BLDM was proposed, which can achieve high reflectance and low group delay dispersion in the spectral range of 800 nm ± 48 nm for p-polarization. This BLDM uses HfO 2 -SiO 2 mixture materials with different mixing ratios as high-refractive-index materials in the upper layers and simultaneously optimizes the electric-field distribution. Compared with the traditional HfO 2 /Ta 2 O 5 /SiO 2 BLDM with Bragg structure, the LIDT of this novel BLDM is elevated from 0.31 J/cm 2 to 0.49 J/cm 2 , irradiated by a p-polarized 40 fs laser pulse at an incident angle of 45°. This means that the LIDT improved by 58%. The damage morphology and calculated equivalent integral electric field distribution results indicate that damage occurs at the location with the maximum electric field intensity in high-refractive-index material. This study demonstrates that the femtosecond LIDT of BLDMs can be enhanced not only by electric field optimization but also by utilizing high-optical-bandgap mixture coatings. By combining these two approaches, the damage threshold of the BLDM developed in this study has been significantly improved. This study presents a new approach for enhancing the LIDT of BLDMs in the femtosecond regime.
- 14 October 2025
- Published by Optica Publishing Group in Optics Express
- Vol. 33 (21) , 44744-44755
Reduction of interface defects in Al2O3/HfO2 nanolaminates using ultrathin SiO2 interlayers grown via plasma-enhanced atomic layer deposition
Al2O3/HfO2 nanolaminates combine the advantages of both Al2O3 and HfO2, showing great potential in applications such as laser coatings. However, the Al2O3-on-HfO2 interface in Al2O3/HfO2 nanolaminates has a relatively high defect density, which can negatively affect the overall performance of associated coatings. Ultrathin SiO2 interlayers were added at the Al2O3-on-HfO2 interface in an Al2O3/HfO2 nanolaminate and an Al2O3–HfO2 nanocomposite with thinner sublayers using plasma-enhanced atomic layer deposition. The experimental results show that adding SiO2 interlayers can reduce the interface defect density and increase the laser-induced damage threshold (LIDT) of the nanolaminate and nanocomposite without significantly affecting the refractive index. When using this Al2O3–HfO2–SiO2 nanocomposite instead of HfO2 to fabricate a plate laser beam splitter coating, the LIDT can be increased by 1.5 times. We believe that this ultrathin SiO2 interlayer strategy may benefit other nanolaminates with high-density interface defects and contribute to enhancing the performance of high-power laser coatings.
- 14 October 2025
- Published by Optica Publishing Group in Optics Express
- Vol. 33 (21) , 44744-44755
Reduction of interface defects in Al2O3/HfO2 nanolaminates using ultrathin SiO2 interlayers grown via plasma-enhanced atomic layer deposition
Al2O3/HfO2 nanolaminates combine the advantages of both Al2O3 and HfO2, showing great potential in applications such as laser coatings. However, the Al2O3-on-HfO2 interface in Al2O3/HfO2 nanolaminates has a relatively high defect density, which can negatively affect the overall performance of associated coatings. Ultrathin SiO2 interlayers were added at the Al2O3-on-HfO2 interface in an Al2O3/HfO2 nanolaminate and an Al2O3–HfO2 nanocomposite with thinner sublayers using plasma-enhanced atomic layer deposition. The experimental results show that adding SiO2 interlayers can reduce the interface defect density and increase the laser-induced damage threshold (LIDT) of the nanolaminate and nanocomposite without significantly affecting the refractive index. When using this Al2O3–HfO2–SiO2 nanocomposite instead of HfO2 to fabricate a plate laser beam splitter coating, the LIDT can be increased by 1.5 times. We believe that this ultrathin SiO2 interlayer strategy may benefit other nanolaminates with high-density interface defects and contribute to enhancing the performance of high-power laser coatings.
- 31 July 2025
- Published by Elsevier in Applied Surface Science
- Vol. 712
Enhancing reflectivity of Mo/Si/C multilayers deposited on inclined substrates by substrate bias voltage
- 31 July 2025
- Published by Elsevier in Applied Surface Science
- Vol. 712
Enhancing reflectivity of Mo/Si/C multilayers deposited on inclined substrates by substrate bias voltage
- 19 August 2024
- Published by Elsevier in Materials Science in Semiconductor Processing
- Vol. 184
Effect of ternary compound on HfO2-Al2O3 mixture coatings revealed by solid-state NMR and TOF-SIMS
- 19 August 2024
- Published by Elsevier in Materials Science in Semiconductor Processing
- Vol. 184
Effect of ternary compound on HfO2-Al2O3 mixture coatings revealed by solid-state NMR and TOF-SIMS
- 5 June 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (24) , 31756-31767
Comparative Study of Plasma-Enhanced-Atomic-Layer-Deposited Al2O3/HfO2/SiO2 and HfO2/Al2O3/SiO2 Trilayers for Ultraviolet Laser Applications
High-performance thin films combining large optical bandgap Al2O3 and high refractive index HfO2 are excellent components for constructing the next generation of laser systems with enhanced output power. However, the growth of low-defect plasma-enhanced-atomic-layer-deposited (PEALD) Al2O3 for high-power laser applications and its combination with HfO2 and SiO2 materials commonly used in high-power laser thin films still face challenges, such as how to minimize defects, especially interface defects. In this work, substrate-layer interface defects in Al2O3 single-layer thin films, layer-layer interface defects in Al2O3-based bilayer and trilayer thin films, and their effects on the laser-induced damage threshold (LIDT) were investigated via capacitance-voltage (C-V) measurements. The experimental results show that by optimizing the deposition parameters, specifically the deposition temperature, precursor exposure time, and plasma oxygen exposure time, Al2O3 thin films with low defect density and high LIDT can be obtained. Two trilayer anti-reflection (AR) thin film structures, Al2O3/HfO2/SiO2 and HfO2/Al2O3/SiO2, were then prepared and compared. The trilayer AR thin film with Al2O3/HfO2/SiO2 structure exhibits a lower interface defect density, better interface bonding performance, and an increase in LIDT by approximately 2.8 times. We believe these results provide guidance for the control of interface defects and the design of thin film structures and will benefit many thin film optics for laser applications.
- 5 June 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (24) , 31756-31767
Comparative Study of Plasma-Enhanced-Atomic-Layer-Deposited Al2O3/HfO2/SiO2 and HfO2/Al2O3/SiO2 Trilayers for Ultraviolet Laser Applications
High-performance thin films combining large optical bandgap Al2O3 and high refractive index HfO2 are excellent components for constructing the next generation of laser systems with enhanced output power. However, the growth of low-defect plasma-enhanced-atomic-layer-deposited (PEALD) Al2O3 for high-power laser applications and its combination with HfO2 and SiO2 materials commonly used in high-power laser thin films still face challenges, such as how to minimize defects, especially interface defects. In this work, substrate-layer interface defects in Al2O3 single-layer thin films, layer-layer interface defects in Al2O3-based bilayer and trilayer thin films, and their effects on the laser-induced damage threshold (LIDT) were investigated via capacitance-voltage (C-V) measurements. The experimental results show that by optimizing the deposition parameters, specifically the deposition temperature, precursor exposure time, and plasma oxygen exposure time, Al2O3 thin films with low defect density and high LIDT can be obtained. Two trilayer anti-reflection (AR) thin film structures, Al2O3/HfO2/SiO2 and HfO2/Al2O3/SiO2, were then prepared and compared. The trilayer AR thin film with Al2O3/HfO2/SiO2 structure exhibits a lower interface defect density, better interface bonding performance, and an increase in LIDT by approximately 2.8 times. We believe these results provide guidance for the control of interface defects and the design of thin film structures and will benefit many thin film optics for laser applications.