Dongyang Chen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Dongyang Chen has a total of 32 co-authors. Here are the top co-authors by number of shared publications:
Guang Pan
3 shared publications- Guang Pan
School of Marine Science and Technology, Northwestern Polytechnical University, Xi’an 710072, China
2 shared publications - Jing Liu
Northwestern Polytechnical University
2 shared publications - Peng Xu
College of Shipbuilding Engineering, Harbin Engineering University, Harbin 150001, China
2 shared publications Yaochen Lin
2 shared publications- Ye Tang
Ocean Institute, Northwestern Polytechnical University, Suzhou, China
2 shared publications
Latest Publications
- 27 May 2026
- Published by World Scientific Pub Co Pte Ltd in International Journal of Structural Stability and Dynamics
Analysis of Vortex-Induced Vibration For Enhanced Energy Harvesting From Nonlinear Cylinder System
With the rapid development of marine engineering, offshore renewable energy exploitation and marine structural safety have become key research priorities. This paper investigates the effect of nonlinear springs on the vortex-induced vibration (VIV) characteristics and energy harvesting efficiency of the rigidly-connected coupled double-cylinder system. Using computational fluid dynamics (CFD) and structural dynamics methods, along with overset mesh techniques, the vibration models for the 2-degree-of-freedom (DOF) system with nonlinear springs are developed. By varying the spacing ratio between the cylinders and the incoming flow angles, the system’s vibration response, power spectral density, fluid force coefficients, and vortex shedding and energy harvesting efficiency are analyzed. The study finds that nonlinear springs effectively increase the vibration amplitude and broaden the effective vibration range of the system, maintaining stable energy harvesting performance across a wide range of Reynolds numbers. The spacing between cylinders and the income flow angle significantly influence the VIV, and there is a notable correlation between these parameters and the system’s energy harvesting efficiency. This research provides theoretical support for the optimization of VIV energy harvesting systems.
- 27 May 2026
- Published by World Scientific Pub Co Pte Ltd in International Journal of Structural Stability and Dynamics
Analysis of Vortex-Induced Vibration For Enhanced Energy Harvesting From Nonlinear Cylinder System
With the rapid development of marine engineering, offshore renewable energy exploitation and marine structural safety have become key research priorities. This paper investigates the effect of nonlinear springs on the vortex-induced vibration (VIV) characteristics and energy harvesting efficiency of the rigidly-connected coupled double-cylinder system. Using computational fluid dynamics (CFD) and structural dynamics methods, along with overset mesh techniques, the vibration models for the 2-degree-of-freedom (DOF) system with nonlinear springs are developed. By varying the spacing ratio between the cylinders and the incoming flow angles, the system’s vibration response, power spectral density, fluid force coefficients, and vortex shedding and energy harvesting efficiency are analyzed. The study finds that nonlinear springs effectively increase the vibration amplitude and broaden the effective vibration range of the system, maintaining stable energy harvesting performance across a wide range of Reynolds numbers. The spacing between cylinders and the income flow angle significantly influence the VIV, and there is a notable correlation between these parameters and the system’s energy harvesting efficiency. This research provides theoretical support for the optimization of VIV energy harvesting systems.
- 1 March 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (3)
Hydroacoustic reduction mechanism for the bionic hydrofoil
A bionic hydrofoil with the features of trailing-edge serrations, leading-edge wavy protuberances, and wavy surface was proposed for the radiation noise reduction. Large eddy simulations were conducted for the near-field unsteady turbulent flows at Reynolds number (Re) 1.0×105 and zero angle of attack to obtain the radiation noise sources. A Ffowcs Williams and Hawkings acoustic analogy was applied to the far-field sound calculations for two sets of bionic hydrofoils with different amplitudes and wavelengths of the wavy edge. The results show that the bionic hydrofoil effectively reduces its drag, the maximum drag reduction reaches 18.15% and the smallest mean drag exists at the medium amplitude or wavelength. The bionic hydrofoil also effectively reduces the turbulent radiation noise; the maximum overall sound pressure level reduction reaches 20 dB in the considered cases. It is found that, as the wavy edge amplitude increases to 2 mm, the line spectra disappear in the sound pressure level (SPL) profile. The SPL reduces by a value more than 25 dB. The wavy surface of the bionic hydrofoil triggers streamwise vortices, which break the long spanwise vortex structures into the small-scale vortices and make the flow separation shift forward. As the amplitude of the wavy edge increases, the vorticity of the streamwise vortices increases. This makes the flow separation shift more forward and more violently breaks the downstream vortices. It turns out that the velocity fluctuation in the wake is attenuated, leading to the radiation noise reduction.
- 1 March 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (3)
Hydroacoustic reduction mechanism for the bionic hydrofoil
A bionic hydrofoil with the features of trailing-edge serrations, leading-edge wavy protuberances, and wavy surface was proposed for the radiation noise reduction. Large eddy simulations were conducted for the near-field unsteady turbulent flows at Reynolds number (Re) 1.0×105 and zero angle of attack to obtain the radiation noise sources. A Ffowcs Williams and Hawkings acoustic analogy was applied to the far-field sound calculations for two sets of bionic hydrofoils with different amplitudes and wavelengths of the wavy edge. The results show that the bionic hydrofoil effectively reduces its drag, the maximum drag reduction reaches 18.15% and the smallest mean drag exists at the medium amplitude or wavelength. The bionic hydrofoil also effectively reduces the turbulent radiation noise; the maximum overall sound pressure level reduction reaches 20 dB in the considered cases. It is found that, as the wavy edge amplitude increases to 2 mm, the line spectra disappear in the sound pressure level (SPL) profile. The SPL reduces by a value more than 25 dB. The wavy surface of the bionic hydrofoil triggers streamwise vortices, which break the long spanwise vortex structures into the small-scale vortices and make the flow separation shift forward. As the amplitude of the wavy edge increases, the vorticity of the streamwise vortices increases. This makes the flow separation shift more forward and more violently breaks the downstream vortices. It turns out that the velocity fluctuation in the wake is attenuated, leading to the radiation noise reduction.
- 1 October 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (10)
Three-dimensional flow field analysis of biomimetic undulating fins: A comparative study of fin morphologies
Fish and numerous aquatic organisms have undergone millions of years of evolution and natural selection, resulting in movement performance, energy efficiency, and maneuverability that surpass existing engineered propulsion technologies. Throughout biological evolution, fluid dynamic effects have played a significant role in shaping fish fin morphology, primarily through fin–flow interaction mechanisms. This study employs computational fluid dynamics to systematically compare and analyze the hydrodynamic performance and three-dimensional flow field characteristics of convex fins (modeled after the anal fin morphology of Apteronotus albifrons) and various geometric fin configurations. From a microscopic perspective, the research elucidates the optimized fin shape characteristics developed through biological evolution and their underlying flow field regulation mechanisms. The results demonstrate that the biologically derived convex fin exhibits streamlined characteristics and superior hydrodynamic performance compared to other fin geometries. Specifically, this fin shape efficiently directs fluid flow toward the posterior region of the fin surface, optimizing momentum transfer efficiency. Furthermore, the convex fin maintains a stable jet structure extending from the mid-section to the trailing edge, generating a thrust mechanism dominated by suction (negative pressure) due to pressure differentials. Additionally, the vortex structures distributed along the convex fin's length alternate both horizontally and vertically, ensuring multidirectional momentum exchange capabilities during fin oscillation and thereby enhancing maneuverability.
- 1 October 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (10)
Three-dimensional flow field analysis of biomimetic undulating fins: A comparative study of fin morphologies
Fish and numerous aquatic organisms have undergone millions of years of evolution and natural selection, resulting in movement performance, energy efficiency, and maneuverability that surpass existing engineered propulsion technologies. Throughout biological evolution, fluid dynamic effects have played a significant role in shaping fish fin morphology, primarily through fin–flow interaction mechanisms. This study employs computational fluid dynamics to systematically compare and analyze the hydrodynamic performance and three-dimensional flow field characteristics of convex fins (modeled after the anal fin morphology of Apteronotus albifrons) and various geometric fin configurations. From a microscopic perspective, the research elucidates the optimized fin shape characteristics developed through biological evolution and their underlying flow field regulation mechanisms. The results demonstrate that the biologically derived convex fin exhibits streamlined characteristics and superior hydrodynamic performance compared to other fin geometries. Specifically, this fin shape efficiently directs fluid flow toward the posterior region of the fin surface, optimizing momentum transfer efficiency. Furthermore, the convex fin maintains a stable jet structure extending from the mid-section to the trailing edge, generating a thrust mechanism dominated by suction (negative pressure) due to pressure differentials. Additionally, the vortex structures distributed along the convex fin's length alternate both horizontally and vertically, ensuring multidirectional momentum exchange capabilities during fin oscillation and thereby enhancing maneuverability.
- 1 August 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (8)
Nonlinear dynamics and vibration suppression of fiber-reinforced composite three-dimensional pipes transporting liquid–gas two-phase flow with nonlinear energy sink
Recently, pipelines have been extensively applied in engineering transportation because of their excellent continuity and high efficiency. Nevertheless, harmful noise and vibration will be generated in complex engineering application environments. We conducted a comprehensive study on the construction of three-dimensional pipelines for transporting gas–liquid two-phase flow using fiber-reinforced composite materials (FRC). Building upon this foundation, we developed an innovative pipeline configuration incorporating bidirectional nonlinear energy sinks (NES) and implemented parameter optimization techniques to maximize the vibration suppression performance of the system. According to the Euler–Bernoulli beam theory, the three-dimensional governing equations of the pipelines acted by the external excitations were established by adopting Hamilton's variational principle. The ordinary differential equation of the system motion was obtained by discretizing variables utilizing the Galerkin technique. The frequency response characteristics were achieved using the harmonic balance method combined with a pseudo-arc length extension approach. The effects of parameters such as fiber orientation angle, damping coefficient, liquid volume coefficient, liquid velocity, and external excitation amplitude on the frequency responses of the FRC three-dimensional pipe were explored. To ensure the correctness of this analytical method, the present results were contrasted with the response curve obtained by the Runge–Kutta technique. Additionally, the nonlinear dynamic evolution of the pipelines, including the bifurcation and chaos, was further predicted using global bifurcation diagrams incorporated with phase diagrams and Poincaré diagrams, which provided a significant reference for the design of the pipes conveying the two-phase flow. Additionally, this study designed two additional NES attached on the pipeline structure to conduct the three-dimensional vibration control, analyzed their vibration reduction effect, and optimized the control parameters through genetic algorithm to improve their vibration control effect.
- 1 August 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (8)
Nonlinear dynamics and vibration suppression of fiber-reinforced composite three-dimensional pipes transporting liquid–gas two-phase flow with nonlinear energy sink
Recently, pipelines have been extensively applied in engineering transportation because of their excellent continuity and high efficiency. Nevertheless, harmful noise and vibration will be generated in complex engineering application environments. We conducted a comprehensive study on the construction of three-dimensional pipelines for transporting gas–liquid two-phase flow using fiber-reinforced composite materials (FRC). Building upon this foundation, we developed an innovative pipeline configuration incorporating bidirectional nonlinear energy sinks (NES) and implemented parameter optimization techniques to maximize the vibration suppression performance of the system. According to the Euler–Bernoulli beam theory, the three-dimensional governing equations of the pipelines acted by the external excitations were established by adopting Hamilton's variational principle. The ordinary differential equation of the system motion was obtained by discretizing variables utilizing the Galerkin technique. The frequency response characteristics were achieved using the harmonic balance method combined with a pseudo-arc length extension approach. The effects of parameters such as fiber orientation angle, damping coefficient, liquid volume coefficient, liquid velocity, and external excitation amplitude on the frequency responses of the FRC three-dimensional pipe were explored. To ensure the correctness of this analytical method, the present results were contrasted with the response curve obtained by the Runge–Kutta technique. Additionally, the nonlinear dynamic evolution of the pipelines, including the bifurcation and chaos, was further predicted using global bifurcation diagrams incorporated with phase diagrams and Poincaré diagrams, which provided a significant reference for the design of the pipes conveying the two-phase flow. Additionally, this study designed two additional NES attached on the pipeline structure to conduct the three-dimensional vibration control, analyzed their vibration reduction effect, and optimized the control parameters through genetic algorithm to improve their vibration control effect.
- 24 June 2025
- Published by Elsevier in Marine Structures
- Vol. 104
Analysis of fluid-structure interaction vibration and fatigue life of fluid-filled pipelines in underwater vehicles
- 24 June 2025
- Published by Elsevier in Marine Structures
- Vol. 104
Analysis of fluid-structure interaction vibration and fatigue life of fluid-filled pipelines in underwater vehicles
- 1 June 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (6)
Investigation of scale effects and prediction methodology for low-frequency unsteady broadband forces in pump-jet propulsors operating under submarine hull wake conditions
The vibration and noise radiation of submarine thrusters have become an important research object for the low-noise design of submarines. The unsteady force generated during the operation of the thruster caused by the incoming turbulence is one of the important sources of low-frequency vibration noise in submarines. In this paper, a high-fidelity numerical simulation model of pump-jet propulsion unsteady flow under submarine hull wake condition is constructed based on the improved delayed separation eddy simulation and large eddy simulation (LES) turbulence models. By comparing with the experimental data, it is found that the LES turbulence model forecasts the low-frequency unsteady broadband force with higher accuracy. A method for predicting the low-frequency unsteady broadband force of pump-jet propulsion is formed. Based on this method, the flow field characteristics and low-frequency unsteady broadband forces of the pump-jet thruster under three scaling scales and two advance ratios are calculated. Results indicate that the scaling effect of the pump-jet thruster cannot be neglected: the duct thrust coefficient KTd decreases with increasing scaling scale, while the stator drag coefficient KTs, rotor thrust coefficient KTr, rotor torque coefficient KQr, thruster efficiency, amplitude of unsteady force at the first-order lobe frequency, and amplitude of energy integral in the corresponding interval all increase accordingly. Additionally, at identical scaling scales, as inflow velocity rises, both the amplitude of unsteady forces on rotor blades and the amplitude of energy integrals grow significantly.
- 1 June 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (6)
Investigation of scale effects and prediction methodology for low-frequency unsteady broadband forces in pump-jet propulsors operating under submarine hull wake conditions
The vibration and noise radiation of submarine thrusters have become an important research object for the low-noise design of submarines. The unsteady force generated during the operation of the thruster caused by the incoming turbulence is one of the important sources of low-frequency vibration noise in submarines. In this paper, a high-fidelity numerical simulation model of pump-jet propulsion unsteady flow under submarine hull wake condition is constructed based on the improved delayed separation eddy simulation and large eddy simulation (LES) turbulence models. By comparing with the experimental data, it is found that the LES turbulence model forecasts the low-frequency unsteady broadband force with higher accuracy. A method for predicting the low-frequency unsteady broadband force of pump-jet propulsion is formed. Based on this method, the flow field characteristics and low-frequency unsteady broadband forces of the pump-jet thruster under three scaling scales and two advance ratios are calculated. Results indicate that the scaling effect of the pump-jet thruster cannot be neglected: the duct thrust coefficient KTd decreases with increasing scaling scale, while the stator drag coefficient KTs, rotor thrust coefficient KTr, rotor torque coefficient KQr, thruster efficiency, amplitude of unsteady force at the first-order lobe frequency, and amplitude of energy integral in the corresponding interval all increase accordingly. Additionally, at identical scaling scales, as inflow velocity rises, both the amplitude of unsteady forces on rotor blades and the amplitude of energy integrals grow significantly.
- 1 October 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (10)
Vortex-induced vibration and energy harvesting of cylinder system with nonlinear springs
Vortex-induced vibration is a common fluid–structure coupling phenomenon in ocean engineering. As a nonlinear stiffness structure caused by anisotropic deformation and support gap, nonlinear spring is of great significance in the field of vortex-induced vibration. Based on the structural dynamics equations and the wake oscillator model, the vibration model of the 2-Degree of Freedom cylinder system with the nonlinear stiffness spring is established. The stiffness ratio, mass ratio, and damping ratio of the cylinder system are changed, and the amplitude and frequency response are analyzed to obtain the effect of nonlinear spring on vortex-induced vibration. The results show that the cylinder system with a nonlinear stiffness spring can maintain a high vibration amplitude in a large Reynolds number range, and the smaller the mass ratio, the more significant the effect is. When m*=1.5, the amplitude of the cylinder system in a cross flow is greater than 0.6 at Re = 180 000–480 000. The energy harvesting in the vortex-induced vibration of cylinder systems with nonlinear stiffness springs is also studied. The efficiency depends on the damping ratio and Reynolds number. When the damping ratio is constant, the energy harvesting efficiency increases first and then decreases with the Reynolds number increases. When m*=1.5, the energy harvesting efficiency of the cylinder system is 19.27% with Re= 35 000 and damping ratio ξ=0.155. As a kind of renewable energy, energy harvesting in vortex-induced vibration is a potential development direction in the future energy field.
- 1 October 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (10)
Vortex-induced vibration and energy harvesting of cylinder system with nonlinear springs
Vortex-induced vibration is a common fluid–structure coupling phenomenon in ocean engineering. As a nonlinear stiffness structure caused by anisotropic deformation and support gap, nonlinear spring is of great significance in the field of vortex-induced vibration. Based on the structural dynamics equations and the wake oscillator model, the vibration model of the 2-Degree of Freedom cylinder system with the nonlinear stiffness spring is established. The stiffness ratio, mass ratio, and damping ratio of the cylinder system are changed, and the amplitude and frequency response are analyzed to obtain the effect of nonlinear spring on vortex-induced vibration. The results show that the cylinder system with a nonlinear stiffness spring can maintain a high vibration amplitude in a large Reynolds number range, and the smaller the mass ratio, the more significant the effect is. When m*=1.5, the amplitude of the cylinder system in a cross flow is greater than 0.6 at Re = 180 000–480 000. The energy harvesting in the vortex-induced vibration of cylinder systems with nonlinear stiffness springs is also studied. The efficiency depends on the damping ratio and Reynolds number. When the damping ratio is constant, the energy harvesting efficiency increases first and then decreases with the Reynolds number increases. When m*=1.5, the energy harvesting efficiency of the cylinder system is 19.27% with Re= 35 000 and damping ratio ξ=0.155. As a kind of renewable energy, energy harvesting in vortex-induced vibration is a potential development direction in the future energy field.
- 1 June 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (6)
Vortex-induced vibration characteristics of rigidly connected four-cylinder system and nonlinear energy sinks for vibration suppression
In order to study the vortex-induced vibration (VIV) characteristics of rigidly connected four-cylinder systems and the suppression of vortex-induced vibration by nonlinear energy sinks (NESs), a fluid–structure coupling dynamic simulation model of a two-degree-of-freedom rigidly connected four-cylinder system is established based on computational fluid dynamics, structural dynamics, and overset mesh technology. The accuracy of the numerical model established in this paper is verified by comparing with the experimental data of literatures. The results show that the dimensionless vertical amplitude of the four-cylinder system decreases with increase in the inflow angle, the reduced velocity advance of the maximum vertical amplitude moves forward and the frequency “lock-in” interval is shortened. Among them, the maximum amplitude at Ur=7 is 0.75 when the inflow angle is 0°, and the maximum amplitude is 0.54 at Ur=6.5 when the inflow angle is 45°. The corresponding frequency “lock-in” interval ranges from Ur=4.5–7 change to Ur=5–6.5. The NES can absorb the cylinder vibration energy, and when the NES parameter β=0.1,ξ=0.8,γ=0.8, the maximum vertical of the four-cylinder system with inflow angle of 0° can be reduced by 76%.
- 1 June 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (6)
Vortex-induced vibration characteristics of rigidly connected four-cylinder system and nonlinear energy sinks for vibration suppression
In order to study the vortex-induced vibration (VIV) characteristics of rigidly connected four-cylinder systems and the suppression of vortex-induced vibration by nonlinear energy sinks (NESs), a fluid–structure coupling dynamic simulation model of a two-degree-of-freedom rigidly connected four-cylinder system is established based on computational fluid dynamics, structural dynamics, and overset mesh technology. The accuracy of the numerical model established in this paper is verified by comparing with the experimental data of literatures. The results show that the dimensionless vertical amplitude of the four-cylinder system decreases with increase in the inflow angle, the reduced velocity advance of the maximum vertical amplitude moves forward and the frequency “lock-in” interval is shortened. Among them, the maximum amplitude at Ur=7 is 0.75 when the inflow angle is 0°, and the maximum amplitude is 0.54 at Ur=6.5 when the inflow angle is 45°. The corresponding frequency “lock-in” interval ranges from Ur=4.5–7 change to Ur=5–6.5. The NES can absorb the cylinder vibration energy, and when the NES parameter β=0.1,ξ=0.8,γ=0.8, the maximum vertical of the four-cylinder system with inflow angle of 0° can be reduced by 76%.