SCSatish Chaurasia

Satish Chaurasia

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Satish Chaurasia has a total of 15 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Machine learning based optimization of micro-electro discharge milling responses of AZ91 magnesium alloy for biomedical applications

    by Subhankar Saha, Satish Chaurasia, Rashed Mustafa Mazarbhuiya, Ambika Swargiary, Saikat Ranjan Maity, Sudip Dey, Kishore Debnath

    Enhancing the surface characteristics of biomedical implants is crucial for increasing their compatibility with biological implants and minimizing their corrosion rate. Despite the possibility of such surface alterations, micro electro discharge (μED) milling has not been widely used in this area. This study examines the processing of biodegradable magnesium alloy using μED milling, with an emphasis on analysing machining time (MT) and surface roughness (Ra). The impact of pulse on-time (T on ), voltage (V) and tool rotational speed (TRS) is assessed using Spearman correlation coefficient plots to determine their effects on the responses. Four machine learning (ML) methods viz. support vector regression (SVR), extreme gradient boosting (XGB), Random Forest (RF) and Gaussian Process Regression (GPR) are utilized to forecast these outcomes. Among these ML methods GPR exhibits the highest accuracy in predicting outcomes for the collected data. A parametric analysis is conducted using GPR based ML model. The process parameters are then optimized by a preference-based Marine Predators Algorithm (PBMPA) to attain Pareto optimum settings. The optimized surface is analysed using scanning electron microscopy revealing structural characteristics that endorse their use in feasibility for biodegradable medical implant applications.


  • Modeling and optimization of micro-EDM process parameters for Kevlar–carbon interlayer composite using artificial neural network and RSM-based Box–Behnken design

    by Hrishikesh Dutta, Satish Chaurasia, Dhanjit Das, Kishore Debnath

    This study is an attempt to assess the micro-electrical discharge machining behavior of Kevlar–carbon hybrid composites using Box–Behnken design (BBD)-based regression analysis coupled with grey-relational analysis (GRA), and artificial neural network (ANN) modeling. Seventeen experimental trials were produced from the BBD, inclusive of repetitions. The variation of machining time (MT) and dimensional deviation (DD) was studied with respect to pulse on time (T on ), voltage (V), and tool rotation (TR). The analysis of variance (ANOVA) was carried out to develop the regression model for each output response. A multilayer feed-forward neural network was employed in the ANN modeling, comprising four neurons in the input layer, 10 neurons in the hidden layer, and two neurons in the output layer. The regression models for MT and DD, derived from ANOVA, aligned effectively with the experimental data. The maximum error values for the regression models of MT and DD are 0.0207 and 0.04483, respectively. T on and TR were the most critical parameters for MT and DD, as seen by their greater F-values (89.68 and 38.02). Controlling these factors precisely and accurately will optimize machining performance. The best input parameters for minimum MT and DD from the GRA are: T on - 30 µs, V - 220 V, and TR - 300 rpm. At ideal input factor levels, MT and DD values from GRA were 800 s and 69 µm, respectively. Experimental grey-relational grade (GR Grade ) was 0.898974, around 4.95% different than predicted (0.85656). The ANN model predicted MT and DD values close to the experimental values. The greatest ANN prediction errors were 5.68% for MT and 9.22% for DD. The ANN model is adequate because the correlation coefficient ( R = 0.99411) is near 1. This study suggests hybrid composite manufacturing industries apply multiresponse optimization with MT and DD.


  • Microchannel fabrication on bio-grade Nitinol SMA by μ-ED milling process using sustainable oil for improving the machining performance and biocompatibility

    by Satish Chaurasia, Kishore Debnath

    The process of micromachining has garnered attention for its ability to create three-dimensional tiny features, particularly in ultra-hard and exotic materials. The present work investigates the effect of different parameters of the μ-ED milling, such as pulse on time (T on), pulse off time (T off), voltage (V), and tool rotation (TR) on the dimensional deviation (DD), material removal rate (MRR), surface roughness (Ra), and machined surface characteristics (analyzed by EDS and FESEM). The sesame oil as dielectric and tungsten-copper as tool electrodes were used to maintain the accuracy and improve the machinability of bio-grade Nitinol shape memory alloy (SMA). Response surface methodology (RSM) and genetic algorithms (GAs) were used to optimize the various input parameters of the μ-ED milling process. Artificial neural network was combined with GA to find the best parametric combination for microchannel fabrication. The cytotoxicity test was also performed on the machined surface to analyze the biocompatibility of the machined surface. It was found that the cell viability of Nitinol SMA was improved by 85.11% after machining at the optimum condition. The highest MRR was found to be 0.076 gm min−1, and the lowest DD and Ra were found to be 16.47 μm and Ra 0.387 μm, respectively.


  • Micro-machining of Monel K500 using electrical discharge drilling: insights into hole tapering mechanism and surface morphology

    by Kishore Debnath, Hrishikesh Dutta, Satish Chaurasia, Matruprasad Rout, Dhinakaran Veeman

    Monel K500, a corrosion-resistant nickel-copper alloy, presents machining difficulties because of its hardness and toughness. Consequently, the efficacy of non-conventional machining processes on this material demands investigation. Substantial research on micro-feature manufacturing on Monel K500 utilizing the micro-electrical discharge drilling (MEDD) technique remains unreported. This investigation is an attempt to study the micro-machining performance of Monel K500 while fabricating through-micro-holes using MEDD process. The one-factor-at-a-time (OFAT) approach was adopted to arrive at the optimal combination of voltage (V), capacitance (C), tool speed (TS), and pulse duration (PD) for the best output responses. There is a scarcity of extensive investigations on the tapering mechanism in Monel K500 MEDD, such as the one conducted in this study. The value of material removal rate (MRR) at 160 volts was 7.73 × 10−5 g min−1 with 100 pF capacitance, 200 rpm tool speed, and 5 μs pulse duration. At 220 volts, the MRR increased by 50.06% with the same capacitance, tool speed, and pulse length values, reaching 11.60 × 10−5 g min−1. The values of V, C, TS, and PD corresponding to the optimal combination of MRR (35.68 × 10−5 g min−1) and machining time (MT) (16.19 min) were 220 volts, 10000 pF, 400 rpm, and 20 μs respectively. The micrographs of the machined specimens depicted deviation in hole diameter and the presence of tapering in the though-micro-holes. The study revealed that a micro-hole, machined at low discharge energy (DE), has a smoother surface and more uniform size than one machined at higher DE. Monel K500 is extensively utilized in the aerospace, marine, and chemical sectors because to its superior mechanical qualities and corrosion resistance. A standard set of efficient machining conditions can aid in the accurate manufacturing of Monel K500 components with intricate features via the MEDD process.


  • Electrical discharge machining of super alloy incoloy 925: a study based on box behnken design and response surface methodology

    by Satish Chaurasia, Hrishikesh Dutta, Samarjit Singh, Kishore Debnath, Abhijit Bhowmik

    Incoloy 925, a Nikel-based superalloy, exhibits low machinability with conventional machining techniques due to its inhomogeneous properties. Therefore, there is a need to establish a non-conventional method to efficiently machine this alloy. This work is a novel attempt to present the electric discharge machining (EDM) of the superalloy Incoloy 925 and subsequent multi-response optimization. The model for the analysis was designed using the Box Behnken Design (BBD) technique, and the Response Surface Methodology (RSM) was used for the optimization of the results. The machining was performed using a cylindrical copper tool of 11 mm diameter. The effect of pulse-on time (Ton), current, and pulse-off time (Toff) on the material removal rate (MRR), tool wear rate (TWR), and surface roughness (SR) was investigated. The results from variance analysis confirmed the significance of all the three input factors. The investigation revealed that the maximum MRR (99.2154 mm3/min) was obtained at a pulse-on time of 90 μs, pulse-off time of 5 μs, and current of 30 A. The minimum TWR (0.8866 mm3/min) were achieved at Ton = 60 μs, Toff = 8 μs and current = 10 A. The microscopic images of the machined surfaces revealed very few micro-voids and globules and no cracks, resulting in a fine surface finish of 1.2436 μm, achieved through optimal discharge energy transfer and copper electrodes. The optimal values MRR, TWR, and SR according to composite desirability function are 99.1524 mm3/min, 1.0915 mm3/min, and 1.3925 μm. The experimental results were accurately predicted using RSM and an artificial neural network (ANN), with the ANN showing a predicted correlation coefficient (R) close to 1 indicating high accuracy of the model.