Ghadeer Jalloul
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ghadeer Jalloul has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
Mohammad N. Ahmad
6 shared publicationsAya Hachem
4 shared publicationsMohammad Hammoud
4 shared publicationsAhmad B. Albadarin
Baha and Walid Bassatne Department of Chemical Engineering and Advanced Energy, Maroun Semaan Faculty of Engineering and Architecture American University of Beirut Beirut Lebanon
3 shared publicationsCassia Boyadjian
Baha and Walid Bassatne Department of Chemical Engineering and Advanced Energy, Maroun Semaan Faculty of Engineering and Architecture American University of Beirut Beirut Lebanon
2 shared publicationsHussein Awala
Laboratory of Inorganic and Organometallic Coordination Chemistry (LCIO), Faculty of Science Lebanese University Hadath Lebanon
2 shared publications
Latest Publications
- 4 September 2026
- Published by Elsevier in Catalysis Today
- Vol. 479
Structurally engineered Ce/Zr mixed metal UiO-66 for rapid adsorption and visible light degradation of tetracycline
- 4 September 2026
- Published by Elsevier in Catalysis Today
- Vol. 479
Structurally engineered Ce/Zr mixed metal UiO-66 for rapid adsorption and visible light degradation of tetracycline
- 27 April 2026
- Published by Elsevier in Catalysis Today
- Vol. 474
TiO2@Fe-UiO-66 nanocomposite for solar-driven photocatalytic degradation of tetracycline
- 27 April 2026
- Published by Elsevier in Catalysis Today
- Vol. 474
TiO2@Fe-UiO-66 nanocomposite for solar-driven photocatalytic degradation of tetracycline
- Open Access
- 7 March 2026
- Published by Elsevier in Materials Today Communications
- Vol. 52
Iron-doped UiO-66 for Rapid Removal of Tetracycline Antibiotic from Water
- 7 March 2026
- Published by Elsevier in Materials Today Communications
- Vol. 52
Open AccessIron-doped UiO-66 for Rapid Removal of Tetracycline Antibiotic from Water
- Open Access
- 1 January 2025
- Published by Wiley in International Journal of Chemical Engineering
- Vol. 2025 (1)
Modified UiO‐66 for the Degradation of Tetracycline Antibiotic Under Solar Irradiations
UiO‐66 metal–organic framework (MOF) is known for its large surface area, porous structure, and low visible light absorption due to its large band gap energy. In this study, iron‐doped, nickel‐doped, titanium‐doped, (OH) 2 ‐functionalized, and NH 2 ‐functionalized UiO‐66 MOF photocatalysts were synthesized for the degradation of tetracycline (TC) antibiotic under real solar irradiation. The doping of UiO‐66 is anticipated to enhance its visible light absorption and consequently improve its photocatalytic degradation efficiency. The XRD characterization confirmed the crystalline structure of the prepared MOFs with no significant change in the identity peaks of UiO‐66. However, scanning electron microscope (SEM) characterization showed a substantial change in the doped‐MOFs’ morphology compared to the unmodified UiO‐66. The experimental results showed that the metal‐doped UiO‐66 samples had the highest photocatalytic degradation efficiency under both real solar irradiation and white LED light, along with enhanced adsorption capacity. The reactions were performed with an initial TC concentration of 20 ppm and a catalyst dosage of 100 mg/L, and the most efficient MOF was Ni‐UiO‐66. The enhanced performance of the Fe‐doped, Ni‐doped, and Ti‐doped UiO‐66 is attributed to the excellent visible light absorption, suppressed charge carriers recombination effect, and enhanced adsorption capacity. TC was completely degraded within 180 minutes by Ni‐UiO‐66 and Ti‐UiO‐66 compared to only 40% efficiency by UiO‐66.
- 1 January 2025
- Published by Wiley in International Journal of Chemical Engineering
- Vol. 2025 (1)
Open AccessModified UiO‐66 for the Degradation of Tetracycline Antibiotic Under Solar Irradiations
UiO‐66 metal–organic framework (MOF) is known for its large surface area, porous structure, and low visible light absorption due to its large band gap energy. In this study, iron‐doped, nickel‐doped, titanium‐doped, (OH) 2 ‐functionalized, and NH 2 ‐functionalized UiO‐66 MOF photocatalysts were synthesized for the degradation of tetracycline (TC) antibiotic under real solar irradiation. The doping of UiO‐66 is anticipated to enhance its visible light absorption and consequently improve its photocatalytic degradation efficiency. The XRD characterization confirmed the crystalline structure of the prepared MOFs with no significant change in the identity peaks of UiO‐66. However, scanning electron microscope (SEM) characterization showed a substantial change in the doped‐MOFs’ morphology compared to the unmodified UiO‐66. The experimental results showed that the metal‐doped UiO‐66 samples had the highest photocatalytic degradation efficiency under both real solar irradiation and white LED light, along with enhanced adsorption capacity. The reactions were performed with an initial TC concentration of 20 ppm and a catalyst dosage of 100 mg/L, and the most efficient MOF was Ni‐UiO‐66. The enhanced performance of the Fe‐doped, Ni‐doped, and Ti‐doped UiO‐66 is attributed to the excellent visible light absorption, suppressed charge carriers recombination effect, and enhanced adsorption capacity. TC was completely degraded within 180 minutes by Ni‐UiO‐66 and Ti‐UiO‐66 compared to only 40% efficiency by UiO‐66.
- 12 December 2024
- Published by Wiley in The Canadian Journal of Chemical Engineering
- Vol. 103 (7) , 3304-3317
Titania immobilized over Fe‐functionalized beta and silicalite zeolites for tetracycline photocatalytic degradation under visible light
Titania photocatalyst is widely employed in the removal of organic pollutants from water streams. However, TiO2 suffers from agglomeration and is mostly active under UV light resulting in low system efficiency. In this study, we prepared sol–gel TiO2 immobilized on beta (BEA) and silicalite zeolites for the photocatalytic degradation of tetracycline antibiotics under visible light. Ferric ions were incorporated into the supported Titania photocatalyst via ion exchange method to enhance its visible light absorption. The deposition of the Titania over BEA zeolite greatly enhanced its adsorption efficiency (from 5.6% to 24%) and surface area (from 90 to 305.9 m2/g) while silicalite support only slightly affected the adsorption of Titania. The scanning electron microscope (SEM) characterization of the photocatalysts indicated that the zeolite structure was conserved after modification and the UV–VIS DRS characterization confirmed the enhancement of visible light absorption. The TiO2/Fe‐Beta was able to degrade 100% of tetracycline (TC) in solution under blue light after 90 min compared to only 30% by TiO2/Fe‐silicalite and 28% by TiO2. When the weight percentage of TiO2 in the TiO2/Fe‐silicalite photocatalyst increased from 20% to 60%, its efficiency increased from 87% to 99% after 300 min. Similar results were also obtained under white light, where the TiO2/Fe‐Beta achieved the highest efficiency (81.5%) as compared to TiO2/Fe‐silicalite (66.6%) and TiO2 (44.7%). We attribute this enhanced performance of TiO2/Fe‐Beta to enhanced adsorption capacity due to BEA immobilization and improved visible light absorption.
- 12 December 2024
- Published by Wiley in The Canadian Journal of Chemical Engineering
- Vol. 103 (7) , 3304-3317
Titania immobilized over Fe‐functionalized beta and silicalite zeolites for tetracycline photocatalytic degradation under visible light
Titania photocatalyst is widely employed in the removal of organic pollutants from water streams. However, TiO2 suffers from agglomeration and is mostly active under UV light resulting in low system efficiency. In this study, we prepared sol–gel TiO2 immobilized on beta (BEA) and silicalite zeolites for the photocatalytic degradation of tetracycline antibiotics under visible light. Ferric ions were incorporated into the supported Titania photocatalyst via ion exchange method to enhance its visible light absorption. The deposition of the Titania over BEA zeolite greatly enhanced its adsorption efficiency (from 5.6% to 24%) and surface area (from 90 to 305.9 m2/g) while silicalite support only slightly affected the adsorption of Titania. The scanning electron microscope (SEM) characterization of the photocatalysts indicated that the zeolite structure was conserved after modification and the UV–VIS DRS characterization confirmed the enhancement of visible light absorption. The TiO2/Fe‐Beta was able to degrade 100% of tetracycline (TC) in solution under blue light after 90 min compared to only 30% by TiO2/Fe‐silicalite and 28% by TiO2. When the weight percentage of TiO2 in the TiO2/Fe‐silicalite photocatalyst increased from 20% to 60%, its efficiency increased from 87% to 99% after 300 min. Similar results were also obtained under white light, where the TiO2/Fe‐Beta achieved the highest efficiency (81.5%) as compared to TiO2/Fe‐silicalite (66.6%) and TiO2 (44.7%). We attribute this enhanced performance of TiO2/Fe‐Beta to enhanced adsorption capacity due to BEA immobilization and improved visible light absorption.
- Open Access
- 6 August 2024
- Published by Elsevier in Current Research in Green and Sustainable Chemistry
- Vol. 9
Fe-doped TiO2/PVDF-HFP electrospun membranes for tetracycline photocatalytic degradation under visible light
- 6 August 2024
- Published by Elsevier in Current Research in Green and Sustainable Chemistry
- Vol. 9
Open AccessFe-doped TiO2/PVDF-HFP electrospun membranes for tetracycline photocatalytic degradation under visible light
- Open Access
- 11 May 2022
- Published by Frontiers Media SA in Frontiers in Environmental Science
- Vol. 10
Fe-Sensitized Zeolite Supported TiO2 for the Degradation of Tetracycline Using Blue LED Irradiation
In this study, we investigated the photocatalytic degradation as a potential treatment of tetracycline (TC) antibiotic contaminated water using TiO2 semiconductor. To expand the activity of TiO2 into the visible light region and to enhance its adsorption capacity for TC, we explored its modification via sensitization with Fe ions and via immobilization on beta (BEA) zeolite support. The nano-sized beta zeolite, synthesized using the seed-assisted procedure, was used to immobilize TiO2 initially prepared by the sol-gel method. The immobilized TiO2/BEA catalyst was further ion exchanged with Fe3+ ions using FeCl3 precursor. Fe3+ modified TiO2/BEA (Fe-TiO2/BEA) catalyst was characterized using SEM, XRD, BET, UV-VIS DRS, and FTIR. After the immobilization of TiO2 over BEA, the surface area of TiO2 increased from 90 to 530 m2/g and similarly its TC adsorption efficiency increased from 10% to 33%. The photocatalytic performance of the Fe-TiO2/BEA was evaluated under blue LED light for TC degradation. Fe-TiO2/BEA exhibited higher TC removal efficiency (100%) compared to TiO2 (80%) after 90 min of irradiation using 50 W blue LED light for a 250 mg/L initial catalyst concentration and 20 mg/L TC concentration. The enhanced performance of the final catalyst was a result of the expanded surface area due to the immobilization of the TiO2 on the BEA zeolite, which resulted in an improved TC adsorption. Moreover, the presence of Fe3+ ions reduced the band gap energy of the TiO2, hence led to a red shift in its absorption spectrum to the visible light region and minimized the extent of the recombination of the charge carriers.
- 11 May 2022
- Published by Frontiers Media SA in Frontiers in Environmental Science
- Vol. 10
Open AccessFe-Sensitized Zeolite Supported TiO2 for the Degradation of Tetracycline Using Blue LED Irradiation
In this study, we investigated the photocatalytic degradation as a potential treatment of tetracycline (TC) antibiotic contaminated water using TiO2 semiconductor. To expand the activity of TiO2 into the visible light region and to enhance its adsorption capacity for TC, we explored its modification via sensitization with Fe ions and via immobilization on beta (BEA) zeolite support. The nano-sized beta zeolite, synthesized using the seed-assisted procedure, was used to immobilize TiO2 initially prepared by the sol-gel method. The immobilized TiO2/BEA catalyst was further ion exchanged with Fe3+ ions using FeCl3 precursor. Fe3+ modified TiO2/BEA (Fe-TiO2/BEA) catalyst was characterized using SEM, XRD, BET, UV-VIS DRS, and FTIR. After the immobilization of TiO2 over BEA, the surface area of TiO2 increased from 90 to 530 m2/g and similarly its TC adsorption efficiency increased from 10% to 33%. The photocatalytic performance of the Fe-TiO2/BEA was evaluated under blue LED light for TC degradation. Fe-TiO2/BEA exhibited higher TC removal efficiency (100%) compared to TiO2 (80%) after 90 min of irradiation using 50 W blue LED light for a 250 mg/L initial catalyst concentration and 20 mg/L TC concentration. The enhanced performance of the final catalyst was a result of the expanded surface area due to the immobilization of the TiO2 on the BEA zeolite, which resulted in an improved TC adsorption. Moreover, the presence of Fe3+ ions reduced the band gap energy of the TiO2, hence led to a red shift in its absorption spectrum to the visible light region and minimized the extent of the recombination of the charge carriers.