YMYan Mo

Yan Mo

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yan Mo has a total of 24 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Automated Aspheric Zoom Optical Design via Particle Swarm Optimization and Differentiable Ray Tracing

    by Yu Chen, Zhuang Qian, Yikai Lu, Hao Tan, Yan Mo, Donglin Ma

    Conventional zoom optical design typically begins with paraxial analysis to establish an initial configuration, while subsequent refinement and aberration correction rely on the experience of optical designers. This paper proposes an automated framework for zoom optical design that combines particle swarm optimization (PSO) with differentiable optical optimization. The framework first performs a global search in the paraxial domain to obtain an initial configuration that satisfies the target focal-length specifications. Starting from this configuration, differentiable optimization progressively expands the field of view and aperture through a curriculum-learning strategy while optimizing image quality. An adaptive illumination-based fine-tuning strategy is subsequently introduced to automatically adjust the clear apertures subject to prescribed relative-illumination constraints, thereby improving marginal-field image quality. The framework requires the target specifications and group configuration as inputs and automatically generates optimized zoom systems. Two optical systems with different group configurations were successfully designed using the proposed framework. At 0.7 normalized field, the adaptive illumination module improved the mean MTF at the target spatial frequency by 24% and 15% in Cases 1 and 2, respectively. These results demonstrate the effectiveness and potential applicability of the proposed framework for automated zoom optical design.

  • Simulation of large-angle scattered light propagation in non-rotationally symmetric optical systems

    by Lujia Zhao, Hao Tan, Yan Mo, Donglin Ma

    Large-angle scattered light propagation in non-rotationally symmetric optical systems is difficult to simulate because a wide angular spectrum can impose conflicting requirements on spatial sampling and computational-window size. We propose a sectorized angular domain synthesis method (SASM) to address this problem. The target scattering angular domain is determined by downstream aperture acceptance and divided into overlapping local sectors using partition-of-unity weighting to preserve the prescribed angular power distribution. In each sector, the large deflection carrier is removed, the residual field is propagated as a slowly varying envelope in a moving window, and the carrier is restored after registration on a common image plane grid. Sector fields are coherently synthesized within each random-phase realization, followed by Monte Carlo ensemble averaging. The method is evaluated in a tilted two-mirror system under the first-order scattering approximation. Partition-of-unity consistency tests show that the BSDF-weighted sector allocation is independent of the sector number and the overlap ratio within numerical precision. Comparison with an independent direct full-field calculation gives a relative two-dimensional intensity error of 0.849% and an intensity correlation coefficient of 0.999964. Additional sampling tests demonstrate that sectorization suppresses propagation-induced spatial truncation and enables accurate calculation when a single local angular representation exceeds the Nyquist limit. Monte Carlo convergence further confirms a stable ensemble-averaged power estimate. These results demonstrate the numerical reliability of SASM for large-angle scattered light propagation in non-rotationally symmetric optical systems.

  • Propagation of partially coherent scattered light in non-rotationally symmetric optical systems using mode decomposition

    by Lujia Zhao, Hao Tan, Yan Mo, Huiru Ji, Haibo Wang, Zhuang Qian, Donglin Ma

    Partially coherent scattered-light propagation in non-rotationally symmetric optical systems is computationally demanding because the cross-spectral density (CSD) is a four-dimensional quantity and the two transverse directions are generally coupled. A coherent-mode-based framework is developed to avoid direct propagation of the full CSD. The input field is represented by a finite set of two-dimensional coherent modes, and surface scattering is introduced through a total-integrated-scatter-normalized complex-amplitude kernel in the angular domain. The resulting weighted scattered components represent the post-scattering CSD without requiring mutual orthogonality. A Gram-matrix-based re-mode decomposition (re-MDM) is further introduced as an optional, error-controlled low-rank compression procedure. The framework is verified against direct CSD propagation and evaluated in a tilted two-mirror reflective system and a transmissive system containing a rotated and decentered rectangular aperture. The numerical studies examine full-rank equivalence, low-rank accuracy, random-phase sensitivity, random-realization convergence, source-coherence dependence, and a non-Gaussian correlation model. Full-rank re-MDM reproduces the direct weighted-component result within numerical accuracy, whereas low-rank re-MDM provides substantially lower intensity errors than direct truncation at the same retained field number. In the tilted two-mirror system, approximately 50 re-decomposed modes retain 99.5% of the scattered-field modal energy, and at R = 80, the global relative L 2 error is reduced by approximately 43 times. These results demonstrate that the proposed framework provides an accurate and efficient approach for partially coherent scattered-light propagation in non-rotationally symmetric optical systems.

  • Differentiable ABCD Matrix Solver for Gaussian Beamlet Decomposition

    by Haibo Wang, Yan Mo, Hao Tan, Zhuang Qian, Donglin Ma

    Gaussian beamlet decomposition is a powerful framework for modeling coherent light propagation in complex optical systems. A key challenge is accurately evaluating the associated ABCD matrix, which is traditionally computed via finite-difference ray tracing with multiple perturbed rays, resulting in numerical errors and sensitivity to perturbation step size. Here, we present a differentiable ABCD matrix solver that enables direct computation of the ABCD matrix without finite-difference approximations. By formulating ray propagation as a differentiable computational graph, the ABCD matrix is obtained via automatic differentiation. We validate the proposed method in both a high-NA microscopic imaging system and a non-imaging beam-shaping system, demonstrating high accuracy and numerical stability compared to conventional approaches. Furthermore, the fully differentiable framework enables gradient-based backpropagation, enabling seamless integration with modern optimization frameworks and inverse wave-optics design.

  • Double Zernike polynomial-based desensitization design method for off-axis optical systems

    by Yan Mo, Hao Tan, Haibo Wang, Zhuang Qian, Donglin Ma

    High-performance off-axis optical systems require not only excellent nominal performance but also strong robustness against alignment tolerances. However, in conventional desensitization procedures for off-axis systems, the lack of an efficient full-field wavefront representation and sensitivity evaluation framework limits the design efficiency. In this work, a practical desensitization design method is developed by integrating the double Zernike (DZ) polynomial with nodal aberration sensitivity (NAS). The double Zernike expansion is introduced as the full-field representation of the optical path difference (OPD) to address the lack of field dependence in Zernike polynomials. The DZ coefficient matrix is determined through discrete orthogonality and Gaussian quadrature (GQ) with specific sampling conditions in both the field and pupil domains. Based on the DZ coefficient matrix, the full-field wavefront representation is incorporated into an NAS-guided sensitivity evaluation. The full-field wavefront reconstruction capability of DZ polynomials is validated in a TMA (three-mirror anastigmat) system. The DZ-based aberration model is then incorporated into a sensitivity-guided desensitization optimization of an off-axis four-mirror telescope for gravitational-wave detection. Under the same alignment tolerances, the maximum full-field RMS wavefront error of the optimized design at the 90% cumulative probability level is reduced from 0.0843λ to 0.0324λ (λ = 1064 nm). These results demonstrate the effectiveness of the proposed method for full-field wavefront reconstruction and robust design of complex off-axis optical systems.

  • Open Access

    Periodically recurrent nondiffracting beams in free-space propagation

    by Haibo Wang, Hao Tan, Yan Mo, Donglin Ma

    We propose a new class of free-space optical fields, termed periodically recurrent nondiffracting beams (PR-NBs), whose transverse intensity profiles reconstruct periodically during propagation. These fields are generated through the coherent superposition of multiple nondiffracting modes, each possessing a distinct transverse spectral radius. While each individual mode preserves an invariant transverse amplitude, their differing longitudinal phase evolutions produce interference that leads to periodic intensity recurrence. An analytical expression for the recurrence period is derived from the Whittaker integral formalism. Furthermore, a discrete spectral synthesis framework based on ring-shaped angular spectra is developed, in which the amplitude and phase parameters are optimized via the Adam algorithm to minimize the mean-square error between the designed and target intensity distributions. This approach enables the systematic design of PR-NBs with controllable periodic evolution of intensity along propagation. We present design examples of complex PR-NBs that demonstrate the method’s potential for structured light engineering, optical manipulation, dynamic beam shaping, and the creation of volumetric optical lattices.

  • Extended homeomorphic Fourier transform framework for non-bijective phase-to-frequency mappings in focused optical field simulation

    by Haibo Wang, Yan Mo, Hao Tan, Donglin Ma

    The homeomorphic Fourier transform (HFT) offers an efficient approach for modeling the diffraction of focused optical fields by exploiting the stationary phase approximation and establishing a bijective mapping between spatial phase and local angular frequency. However, this bijective assumption breaks down for complex or highly aberrated wavefronts, where phase gradients lead to overlapping mappings. In this work, we develop an extended homeomorphic Fourier transform (EHFT) framework that generalizes the original HFT to accurately handle non-bijective phase-to-frequency mappings. The framework introduces an energy-conserving correction to derive a discrete local angular spectrum under the stationary phase approximation, incorporates a local angular spectrum rearrangement strategy that merges redundant frequency components into a compact and quasi-uniform spectral grid, and employs a matrix triple product formulation to enable flexible and accurate inverse Fourier transforms. The EHFT framework preserves the high computational efficiency of the original HFT while substantially enhancing robustness against mapping degeneracies. Its accuracy and efficiency are validated through comprehensive simulations and experimental measurements on aberrated focused fields, demonstrating its potential as a versatile and powerful tool for modeling complex optical field propagation in practical systems.


  • Alignment algorithm for reflective telescopes based on nodal aberration theory and the real-ray-tracing method

    by Yan Mo, Hao Tan, Huiru Ji, Zhuang Qian, Rundong Fan, Donglin Ma

    Nodal aberration theory (NAT) serves as a potent tool for investigating the misalignment of reflective telescopes and is commonly employed in alignment algorithms. A vital parameter in NAT is the sigma vector. The traditional method of calculating this vector is based on paraxial ray tracing, which is relatively complicated and faces the challenge in extending NAT to multi-mirror reflective telescopes. A method for calculating the sigma vector based on real-ray-tracing data provides a convenient solution for locating the aberration field center in a misaligned system. In this paper, we propose an aberration field simulation procedure and alignment algorithm for reflective telescopes. The proposed method combines NAT with real-ray-tracing data and a numerical iteration algorithm that overcomes the limitations of traditional methods, successfully extending this approach to address misalignment issues in multi-mirror systems. The algorithm was applied to a co-axis four-mirror reflective telescope with misalignments, demonstrating its capability to address alignment challenges in multi-mirror systems while significantly reducing computational complexity. The simulation results validate the feasibility of the proposed method, offering flexibility for integrating alignment algorithms with ray data from commercial software or other ray-tracing methods.


  • Aberration compensation design method of freeform reflection systems based on generalized aberration theory with series expansion

    by Zhuang Qian, Huiru Ji, Rundong Fan, Hao Tan, Yan Mo, Donglin Ma

    With the growing demand for high-performance, miniaturized, and lightweight optical systems, off-axis reflective configurations incorporating freeform surfaces have emerged as crucial solutions for reconciling imaging quality with system compactness. However, the intricate mathematical representations and non-rotational symmetry inherent in freeform surfaces present substantial challenges to conventional design methodologies, necessitating innovative direct design approaches. To address these limitations, this paper proposes an advanced aberration compensation method (ACM) rooted in generalized aberration theory (GAT) with series expansion, enabling balanced full-field performance. Distinct from the traditional coefficient minimization method (CMM) that independently minimizes aberration coefficients at individual orders, ACM strategically exploits cross-order aberration compensation through synergistic interactions between lower- and higher-order aberrations. This leads to enhanced full-field imaging performance and better adaptability to asymmetric field layouts. The method is demonstrated on two representative three-mirror anastigmat (TMA) systems: a field-offset zig-zag configuration and a compact circular layout with a small F-number. In both cases, ACM achieves more balanced aberration correction, improved MTF performance, and acceptable computation time increases (under 10%) compared to CMM. These results validate ACM as a promising tool for the efficient and accurate design of freeform optical systems in future advanced applications.