Abror Nomozov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Abror Nomozov has a total of 40 co-authors. Here are the top co-authors by number of shared publications:
Kh.KH. Turaev
Faculty of Chemistry, Termez State University, Termez, Uzbekistan
2 shared publicationsSarvinoz Yuldashova
2 shared publicationsA. Allanazarov
Department of Chemical Engineering, Termez State University of Engineering and Agrotechnologies, Termez, Uzbekistan
1 shared publication- A.A. Akhatov
Faculty of Chemistry, Termez State University, Termez, Uzbekistan
1 shared publication - Abdulakhat Djalilov
Tashkent Research Institute of Chemical Technology, Tashkent, Uzbekistan
1 shared publication Akhmedov U.Ch.
Department of Chemical Engineering, Termez State University of Engineering and Agrotechnologies, Termez, Uzbekiatan
1 shared publication
Latest Publications
- Open Access
- 26 May 2026
- Published by Elsevier in SSRN Electronic Journal
Quantum chemical calculation results of Salsola Oppositifolia extract as a green corrosion inhibitor
This study explores the corrosion inhibition efficiency of a green inhibitor derived from Salsola oppositifolia extract in acidic media. The extract was obtained from the aerial parts and annual green leaves of Salsola oppositifolia using methanol as the solvent. Fourier Transform Infrared (FTIR) spectroscopy revealed the presence of various functional groups—such as hydroxyl (–OH), carbonyl (C=O), carboxylic (–COOH), and aromatic rings—commonly associated with flavonoids and alkaloids. These functional moieties are capable of adsorbing onto metal surfaces through lone pair electrons and π-bond interactions, forming a protective barrier that inhibits the corrosion process by impeding charge transfer. Furthermore, quantum chemical analyses were conducted using Avogadro, HyperChem 8.01, and Accelrys MS Modeling 3.0.1 software to examine the electronic properties of the inhibitor molecule. Semi-empirical methods, including AM1, MNDO, PM3, and RM1, were applied under restricted Hartree–Fock (UHF) conditions to calculate the HOMO and LUMO energies, which provide insight into the molecule’s reactivity and interaction with the metal surface. These simulations were executed on an Intel Pentium 1.40 GHz processor. Finally, the inhibitor's performance was evaluated in a 0.5 M HCl solution using mild steel specimens.
- 26 May 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessQuantum chemical calculation results of Salsola Oppositifolia extract as a green corrosion inhibitor
This study explores the corrosion inhibition efficiency of a green inhibitor derived from Salsola oppositifolia extract in acidic media. The extract was obtained from the aerial parts and annual green leaves of Salsola oppositifolia using methanol as the solvent. Fourier Transform Infrared (FTIR) spectroscopy revealed the presence of various functional groups—such as hydroxyl (–OH), carbonyl (C=O), carboxylic (–COOH), and aromatic rings—commonly associated with flavonoids and alkaloids. These functional moieties are capable of adsorbing onto metal surfaces through lone pair electrons and π-bond interactions, forming a protective barrier that inhibits the corrosion process by impeding charge transfer. Furthermore, quantum chemical analyses were conducted using Avogadro, HyperChem 8.01, and Accelrys MS Modeling 3.0.1 software to examine the electronic properties of the inhibitor molecule. Semi-empirical methods, including AM1, MNDO, PM3, and RM1, were applied under restricted Hartree–Fock (UHF) conditions to calculate the HOMO and LUMO energies, which provide insight into the molecule’s reactivity and interaction with the metal surface. These simulations were executed on an Intel Pentium 1.40 GHz processor. Finally, the inhibitor's performance was evaluated in a 0.5 M HCl solution using mild steel specimens.
- Open Access
- 23 September 2025
- Published by CSIR-National Institute of Science Communication and Policy Research (NIScPR) in Indian Journal of Chemistry
- Vol. 64 (9) , 881-887
Synthesis and physicochemical analysis of bimetallphthaltocyanine pigment based on bivalent metals
In this paper, the research on the synthesis of magnesium-zinc-phthalocyanine pigment was carried out. It was synthesized based on phthalic anhydride, urea, zinc acetate, and magnesium acetate. The mole ratio of the initial substances was taken in the ratio of 1:4:3, and it was synthesized with a yield of 89.5% and carried out at a temperature of 2250C. The structure of this obtained pigment was analyzed by IR spectral analysis of this pigment based on magnesium and zinc phthalocyanine, it was found that the formation of phthalocyanine rings gives a peak in the region of 744.52-792.74 cm-1, while the benzene rings give a peak in the region of 975.98 cm-1. Its thermal stability by thermogravimetric analysis, SEM (scanning electron microscope), EDS, and elemental analysis. According to the results of the analysis, it was confirmed that magnesium-zinc phthalocyanine was synthesized by forming phthalocyanine rings.
- 23 September 2025
- Published by CSIR-National Institute of Science Communication and Policy Research (NIScPR) in Indian Journal of Chemistry
- Vol. 64 (9) , 881-887
Open AccessSynthesis and physicochemical analysis of bimetallphthaltocyanine pigment based on bivalent metals
In this paper, the research on the synthesis of magnesium-zinc-phthalocyanine pigment was carried out. It was synthesized based on phthalic anhydride, urea, zinc acetate, and magnesium acetate. The mole ratio of the initial substances was taken in the ratio of 1:4:3, and it was synthesized with a yield of 89.5% and carried out at a temperature of 2250C. The structure of this obtained pigment was analyzed by IR spectral analysis of this pigment based on magnesium and zinc phthalocyanine, it was found that the formation of phthalocyanine rings gives a peak in the region of 744.52-792.74 cm-1, while the benzene rings give a peak in the region of 975.98 cm-1. Its thermal stability by thermogravimetric analysis, SEM (scanning electron microscope), EDS, and elemental analysis. According to the results of the analysis, it was confirmed that magnesium-zinc phthalocyanine was synthesized by forming phthalocyanine rings.
- Open Access
- 30 April 2025
- Published by CSIR-National Institute of Science Communication and Policy Research (NIScPR) in Indian Journal of Chemistry
- Vol. 64 (4) , 353-360
The Studying Synthesis of a New Polymer Sorbent based on O-phenylenediamine and Epichlorohydrin and Its Sorption Properties
. This article is devoted to the synthesis and sorption properties of a new polymer sorbent (FD-EXG) based on o-phenylenediamine and epichlorohydrin, which separates metal ions from solutions with high precision. In the process of synthesis, the starting materials: o-phenylenediamine and epichlorohydrin were taken in a 1:2 mol ratio. Ethylenediamine was used as a polymerizing and binding agent. The composition, physicochemical and sorption-desorption properties of the obtained polymer sorbent were studied. In the IR spectrum analysis of the sorbent, we can see the presence of n(OH) functional groups in the 3371 cm-1 and 3313 cm-1 and n(NH) ion exchange functional groups in the 1558 cm-1 region. Based on X-ray phase analysis methods, the degree of crystallization of the obtained sorbent and its compound with metal cation (Ni(II)) was determined. Also, the morphology and thermal properties of the obtained sorbent were studied using SEM analysis and TGA and DTA analysis methods. The surface area and the pore size of the polymer sorbent were determined, and its morphology was determined to be macroporous. It has been proven that the synthesized polymer sorbent can be reused many times during the sorption process. It was proved that the obtained polymer sorbent can efficiently remove Ni(II), Co(II), Cu(II), Zn(II) and Cd(II) ions from aqueous solutions. The static exchange capacity (SEC) of the obtained polymer sorbent was determined to be SECNi=9.67, SECCo=8.33, SECCu=7.01, SECZn=6.67 and SECCd=5.01. It has been proven that the static exchange capacity is high in the range of pH=4-6. The time dependence of the sorption process and desorption processes were also studied.
- 30 April 2025
- Published by CSIR-National Institute of Science Communication and Policy Research (NIScPR) in Indian Journal of Chemistry
- Vol. 64 (4) , 353-360
Open AccessThe Studying Synthesis of a New Polymer Sorbent based on O-phenylenediamine and Epichlorohydrin and Its Sorption Properties
. This article is devoted to the synthesis and sorption properties of a new polymer sorbent (FD-EXG) based on o-phenylenediamine and epichlorohydrin, which separates metal ions from solutions with high precision. In the process of synthesis, the starting materials: o-phenylenediamine and epichlorohydrin were taken in a 1:2 mol ratio. Ethylenediamine was used as a polymerizing and binding agent. The composition, physicochemical and sorption-desorption properties of the obtained polymer sorbent were studied. In the IR spectrum analysis of the sorbent, we can see the presence of n(OH) functional groups in the 3371 cm-1 and 3313 cm-1 and n(NH) ion exchange functional groups in the 1558 cm-1 region. Based on X-ray phase analysis methods, the degree of crystallization of the obtained sorbent and its compound with metal cation (Ni(II)) was determined. Also, the morphology and thermal properties of the obtained sorbent were studied using SEM analysis and TGA and DTA analysis methods. The surface area and the pore size of the polymer sorbent were determined, and its morphology was determined to be macroporous. It has been proven that the synthesized polymer sorbent can be reused many times during the sorption process. It was proved that the obtained polymer sorbent can efficiently remove Ni(II), Co(II), Cu(II), Zn(II) and Cd(II) ions from aqueous solutions. The static exchange capacity (SEC) of the obtained polymer sorbent was determined to be SECNi=9.67, SECCo=8.33, SECCu=7.01, SECZn=6.67 and SECCd=5.01. It has been proven that the static exchange capacity is high in the range of pH=4-6. The time dependence of the sorption process and desorption processes were also studied.
- Open Access
- 1 January 2025
- Published by CSIR-National Institute of Science Communication and Policy Research (NIScPR) in Indian Journal of Chemical Technology
- Vol. 32 (3) , 407-417
Synthesis and application of corrosion inhibitor for hydrogen sulfide corrosion of steel
In this paper, the synthesis of PKA-1 brand oligomeric corrosion inhibitor based on polyethylene polyamine (PEPA) and crotonaldehyde has been done. In this synthesis, it is observed that the reaction efficiency is high when the molar ratio of the initial substances is 1:1 and the temperature is 50°C. The duration of the reaction is 2 h and dimethylformamide is used as a solvent. The structure of this synthesized compound has been studied by IR-spectrum methods. The inhibitory properties of the obtained PKA-1 brand corrosion inhibitor have been studied in the prevention of hydrogen sulfide corrosion of steel materials by gravimetric and electrochemical methods at different temperatures and time and at different concentrations of 50 mg/L, 75 mg/L, 100 mg/L and 150 mg/L. According to the obtained results, the inhibition efficiency increased as the inhibitor concentration increased, and the efficiency was 94.3% in OW (oil-water)+H2S (400 mg/L) medium at a concentration of 150 mg/L. Also, the thermodynamic and kinetic parameters of the adsorption mechanisms of this corrosion inhibitor on the steel surface are studied, and the adsorption of this corrosion inhibitor on the steel surface is studied using Temkin, Frumkin and Langmuir isotherms. According to the results, it was found that the adsorption process proceeds according to the Langmuir isotherm. In addition, the surface morphology of steel is studied and analyzed with the help of scanning electron microscope and atomic force microscope.
- 1 January 2025
- Published by CSIR-National Institute of Science Communication and Policy Research (NIScPR) in Indian Journal of Chemical Technology
- Vol. 32 (3) , 407-417
Open AccessSynthesis and application of corrosion inhibitor for hydrogen sulfide corrosion of steel
In this paper, the synthesis of PKA-1 brand oligomeric corrosion inhibitor based on polyethylene polyamine (PEPA) and crotonaldehyde has been done. In this synthesis, it is observed that the reaction efficiency is high when the molar ratio of the initial substances is 1:1 and the temperature is 50°C. The duration of the reaction is 2 h and dimethylformamide is used as a solvent. The structure of this synthesized compound has been studied by IR-spectrum methods. The inhibitory properties of the obtained PKA-1 brand corrosion inhibitor have been studied in the prevention of hydrogen sulfide corrosion of steel materials by gravimetric and electrochemical methods at different temperatures and time and at different concentrations of 50 mg/L, 75 mg/L, 100 mg/L and 150 mg/L. According to the obtained results, the inhibition efficiency increased as the inhibitor concentration increased, and the efficiency was 94.3% in OW (oil-water)+H2S (400 mg/L) medium at a concentration of 150 mg/L. Also, the thermodynamic and kinetic parameters of the adsorption mechanisms of this corrosion inhibitor on the steel surface are studied, and the adsorption of this corrosion inhibitor on the steel surface is studied using Temkin, Frumkin and Langmuir isotherms. According to the results, it was found that the adsorption process proceeds according to the Langmuir isotherm. In addition, the surface morphology of steel is studied and analyzed with the help of scanning electron microscope and atomic force microscope.
- Open Access
- 22 December 2024
- Published by College of Science for Women, University of Baghdad in Baghdad Science Journal
- Vol. 21 (12(Suppl.)) , 3996-4014
Studying of The Process of Obtaining Monocalcium Phosphate based on Extraction Phosphoric Acid from Phosphorites of Central Kyzylkum
تم في هذا البحث إجراء دراسة لإنتاج فوسفات أحادي الكالسيوم بالاعتماد على حامض الفوسفوريك القابل للاستخلاص والذي تم الحصول عليه من فوسفوريت كيزيل-كوم المركزي. تمت دراسة تأثير العوامل المختلفة (الكثافة ودرجة الحرارة واللزوجة للمواد البادئة) على عملية إزالة الفلور وإزالة الكبريت من استخلاص حامض الفوسفوريك وإنتاج فوسفات أحادي الكالسيوم على أساس كربونات الكالسيوم. أجريت التجارب بشكل رئيسي على عينتين، وتمت دراسة تركيب المواد قبل وبعد العملية. ووفقا للنتائج، فإن محتويات المكونات الأخرى تزيد أيضا بشكل متناسب (عينة 1). وبذلك يرتفع محتوى أكسيد الكالسيوم من 1.58% إلى 5.54% بمحتوى 60% P2O5، والمغنيسيوم من 0.49% إلى 1.15%، وأكسيد الحديد من 0.25% إلى 0.85%، وأكسيد الألومنيوم من 0.38% إلى 1.24%، وأيونات الكبريتات. من 0.23% إلى 0.76%، يزيد محتوى أكسيد الكالسيوم من 2.09% إلى 7.40% بمحتوى 60% P2O5، والمغنيسيوم من 0.80% إلى 2.83%، وأكسيد الحديد من 0.25% إلى 0.90%، وأكسيد الألومنيوم من 0.38% إلى 1.34%، أيونات الكبريتات من 0.23% إلى 0.82%. ينخفض محتوى الفلور من 0.32% إلى 0.17% اعتماداً على تركيز وكالة حماية البيئة (عينة 2). كما تمت دراسة عدد من العوامل مثل معدل وتركيز حمض الفوسفوريك والفصل عالي السرعة لحمض الفوسفوريك في عملية الحصول...
- 22 December 2024
- Published by College of Science for Women, University of Baghdad in Baghdad Science Journal
- Vol. 21 (12(Suppl.)) , 3996-4014
Open AccessStudying of The Process of Obtaining Monocalcium Phosphate based on Extraction Phosphoric Acid from Phosphorites of Central Kyzylkum
تم في هذا البحث إجراء دراسة لإنتاج فوسفات أحادي الكالسيوم بالاعتماد على حامض الفوسفوريك القابل للاستخلاص والذي تم الحصول عليه من فوسفوريت كيزيل-كوم المركزي. تمت دراسة تأثير العوامل المختلفة (الكثافة ودرجة الحرارة واللزوجة للمواد البادئة) على عملية إزالة الفلور وإزالة الكبريت من استخلاص حامض الفوسفوريك وإنتاج فوسفات أحادي الكالسيوم على أساس كربونات الكالسيوم. أجريت التجارب بشكل رئيسي على عينتين، وتمت دراسة تركيب المواد قبل وبعد العملية. ووفقا للنتائج، فإن محتويات المكونات الأخرى تزيد أيضا بشكل متناسب (عينة 1). وبذلك يرتفع محتوى أكسيد الكالسيوم من 1.58% إلى 5.54% بمحتوى 60% P2O5، والمغنيسيوم من 0.49% إلى 1.15%، وأكسيد الحديد من 0.25% إلى 0.85%، وأكسيد الألومنيوم من 0.38% إلى 1.24%، وأيونات الكبريتات. من 0.23% إلى 0.76%، يزيد محتوى أكسيد الكالسيوم من 2.09% إلى 7.40% بمحتوى 60% P2O5، والمغنيسيوم من 0.80% إلى 2.83%، وأكسيد الحديد من 0.25% إلى 0.90%، وأكسيد الألومنيوم من 0.38% إلى 1.34%، أيونات الكبريتات من 0.23% إلى 0.82%. ينخفض محتوى الفلور من 0.32% إلى 0.17% اعتماداً على تركيز وكالة حماية البيئة (عينة 2). كما تمت دراسة عدد من العوامل مثل معدل وتركيز حمض الفوسفوريك والفصل عالي السرعة لحمض الفوسفوريك في عملية الحصول...
- Open Access
- 29 October 2024
- Published by CSIR-National Institute of Science Communication and Policy Research (NIScPR) in Indian Journal of Chemistry
- Vol. 63 (10) , 1036-1043
A Synthesis, crystal structure and properties of tris(benzene-1.2-diamine-N,N′)-cadmium naphthalene-1.5-disulfonate trihydrate complex compound
In this research work, for the first time, tris(benzene-1.2-diamine-N,N′)-cadmium naphthalene-1.5-disulfonate trihydrate ([Cd(OPD)3]1,5-NDS·3H2O) complex was synthesized. The molecular and crystal structures of the synthesized complex were studied using the RTT method. In the crystal structure of the [Cd(OPD)3]1,5-NDS·3H2O complex, 3 OPD molecules are chelated to the central Cd(II) ion in the inner sphere. In the outer sphere, there are 1,5-NDS and 3 water molecules. The crystal structure of the complex compound is monoclinic, the spatial group is P21/c, and the spatial shape is distorted octahedral. In the crystal structure of the molecule, there are internal and intermolecular hydrogen bonds of the type O−H...O, N−H...O and C−H...O. For the first time, Hirshfeld surface analysis of this complex compound was performed using the Crystal Explorer program. In this case, H...H (42%), O...H/H...O (32.6%) and H...N/N...H (23.5%) Van Der Waals forces in the molecule form the main interactions. Also, the physicochemical properties of this complex compound were studied using IR-spectroscopic and thermal analysis. In the thermal analysis of the complex, 2 endothermic effects were observed, and mass reduction took place in 4 stages.
- 29 October 2024
- Published by CSIR-National Institute of Science Communication and Policy Research (NIScPR) in Indian Journal of Chemistry
- Vol. 63 (10) , 1036-1043
Open AccessA Synthesis, crystal structure and properties of tris(benzene-1.2-diamine-N,N′)-cadmium naphthalene-1.5-disulfonate trihydrate complex compound
In this research work, for the first time, tris(benzene-1.2-diamine-N,N′)-cadmium naphthalene-1.5-disulfonate trihydrate ([Cd(OPD)3]1,5-NDS·3H2O) complex was synthesized. The molecular and crystal structures of the synthesized complex were studied using the RTT method. In the crystal structure of the [Cd(OPD)3]1,5-NDS·3H2O complex, 3 OPD molecules are chelated to the central Cd(II) ion in the inner sphere. In the outer sphere, there are 1,5-NDS and 3 water molecules. The crystal structure of the complex compound is monoclinic, the spatial group is P21/c, and the spatial shape is distorted octahedral. In the crystal structure of the molecule, there are internal and intermolecular hydrogen bonds of the type O−H...O, N−H...O and C−H...O. For the first time, Hirshfeld surface analysis of this complex compound was performed using the Crystal Explorer program. In this case, H...H (42%), O...H/H...O (32.6%) and H...N/N...H (23.5%) Van Der Waals forces in the molecule form the main interactions. Also, the physicochemical properties of this complex compound were studied using IR-spectroscopic and thermal analysis. In the thermal analysis of the complex, 2 endothermic effects were observed, and mass reduction took place in 4 stages.
- Open Access
- 19 September 2024
- Published by College of Science for Women, University of Baghdad in Baghdad Science Journal
Synthesis of Corrosion Inhibitors Based on (Thio)Urea, Orthophosphoric Acid and Formaldehyde and Their Inhibition Efficiency
في هذا البحث، يتم تحديد الظروف المثالية لتصنيع نوعين من مثبطات التآكل قليلة القسيمات، بولي ميثيلين دياميدوفوسفات (PDAF-1) وبولي ميثيلين ثيودياميدوفوسفات (PTAF-2)، استنادًا إلى مركبات مثل الثيوريا واليوريا وحمض الأرثوفوسفوريك المحتوي على النيتروجين والفوسفور. ، وكذلك يتم تحديد صيغها. في البداية، تم تصنيع (ثيو) ثنائي أميدوفوسفات - مثبط التآكل ذو العلامة التجارية PDAF-1 باستخدام اليوريا وحمض الأرثوفوسفوريك بنسبة 2:1 مول عند درجة حرارة 135-140 درجة مئوية. تم تصنيع النوع الثاني من مثبط التآكل بولي ميثيلين ثيودياميدوفوسفات (PTAF-2) بناءً على عملية التكثيف في بيئة مائية عند درجة حرارة 60 درجة مئوية، وذلك عن طريق إضافة الفورمالديهايد إلى هذا المركب الناتج بنسبة متكافئة 1:1 مول. المادة الناتجة هي مادة صلبة بيضاء، غير متطايرة، تكوين المكون الرئيسي هو 98.7٪، والمواد الأخرى - 1.3٪. قامت أطياف الأشعة تحت الحمراء بدراسة بنية هذين النوعين من مثبطات التآكل. كما تمت دراسة كفاءة تثبيط مثبطات التآكل هذه بالطرق الوزنية والكهروكيميائية في الوسائط المسببة للتآكل مثل حمض الهيدروكلوريك، H2SO4 وكلوريد الصوديوم = 3%. بالإضافة إلى ذلك، تم أيضًا دراسة العوامل المؤثرة...
- 19 September 2024
- Published by College of Science for Women, University of Baghdad in Baghdad Science Journal
Open AccessSynthesis of Corrosion Inhibitors Based on (Thio)Urea, Orthophosphoric Acid and Formaldehyde and Their Inhibition Efficiency
في هذا البحث، يتم تحديد الظروف المثالية لتصنيع نوعين من مثبطات التآكل قليلة القسيمات، بولي ميثيلين دياميدوفوسفات (PDAF-1) وبولي ميثيلين ثيودياميدوفوسفات (PTAF-2)، استنادًا إلى مركبات مثل الثيوريا واليوريا وحمض الأرثوفوسفوريك المحتوي على النيتروجين والفوسفور. ، وكذلك يتم تحديد صيغها. في البداية، تم تصنيع (ثيو) ثنائي أميدوفوسفات - مثبط التآكل ذو العلامة التجارية PDAF-1 باستخدام اليوريا وحمض الأرثوفوسفوريك بنسبة 2:1 مول عند درجة حرارة 135-140 درجة مئوية. تم تصنيع النوع الثاني من مثبط التآكل بولي ميثيلين ثيودياميدوفوسفات (PTAF-2) بناءً على عملية التكثيف في بيئة مائية عند درجة حرارة 60 درجة مئوية، وذلك عن طريق إضافة الفورمالديهايد إلى هذا المركب الناتج بنسبة متكافئة 1:1 مول. المادة الناتجة هي مادة صلبة بيضاء، غير متطايرة، تكوين المكون الرئيسي هو 98.7٪، والمواد الأخرى - 1.3٪. قامت أطياف الأشعة تحت الحمراء بدراسة بنية هذين النوعين من مثبطات التآكل. كما تمت دراسة كفاءة تثبيط مثبطات التآكل هذه بالطرق الوزنية والكهروكيميائية في الوسائط المسببة للتآكل مثل حمض الهيدروكلوريك، H2SO4 وكلوريد الصوديوم = 3%. بالإضافة إلى ذلك، تم أيضًا دراسة العوامل المؤثرة...
- 21 June 2024
- Published by CSIR-National Institute of Science Communication and Policy Research (NIScPR) in Indian Journal of Chemistry
- Vol. 63 (6) , 579-585
A STUDYING SYNTHESIS OF A CHELATE-FORMING SORBENT BASED ON UREA-FORMALDEHYDE AND DIPHENYLCARBAZONE
In this research work, the synthesis of a new type of chelating sorbent based on the cross-polycondensation reaction of urea, and formaldehyde with diphenylcarbazone in an alkaline medium and the study of its various properties were studied. When the effect of temperature on the synthesis of this new chelating sorbent was studied, the optimal temperature was 90 °C, the duration of time was 1.5-2 hours, and the mole ratio of the starting materials was respectively: urea, formaldehyde (2:5) and diphenylcarbazone It was obtained in 0.1:0.2 0.3 mol ratios. The static exchange capacity of the chelating sorbent was 4.3 mg/eq for 0.1 N NaOH solution. In addition, the sorption levels of ions such as Cu(II), Zn(II), and Ni(II) were also determined. The influence of the environment on the sorption process of this synthesized chelating sorbent with Cu(II) ions was observed. capacity is found to be high. The structure of the newly synthesized sorbent and the sorption of Zn (II) and Cu (II) ions in the solution with the help of the sorbent were studied, and the formation of complex compounds in the sorbent phase was based on the change of vibration frequencies according to the results of IR-spectrum analysis. proposed structure. The IR results confirmed that this sorbent contains OH groups, primary amides (attached melamine ring), and R-O-H group. The surface morphology of this sorbent was studied by SEM analysis. The Langmuir and Freundlich isotherms of the sorption process of the chelating sorbent for Cu (II) ions were studied and analyzed. The obtained results also confirmed that the possibility of using KF-DK as a sorbent for the sorption of d-metals from metallurgical wastewater was highlighted.
- 21 June 2024
- Published by CSIR-National Institute of Science Communication and Policy Research (NIScPR) in Indian Journal of Chemistry
- Vol. 63 (6) , 579-585
A STUDYING SYNTHESIS OF A CHELATE-FORMING SORBENT BASED ON UREA-FORMALDEHYDE AND DIPHENYLCARBAZONE
In this research work, the synthesis of a new type of chelating sorbent based on the cross-polycondensation reaction of urea, and formaldehyde with diphenylcarbazone in an alkaline medium and the study of its various properties were studied. When the effect of temperature on the synthesis of this new chelating sorbent was studied, the optimal temperature was 90 °C, the duration of time was 1.5-2 hours, and the mole ratio of the starting materials was respectively: urea, formaldehyde (2:5) and diphenylcarbazone It was obtained in 0.1:0.2 0.3 mol ratios. The static exchange capacity of the chelating sorbent was 4.3 mg/eq for 0.1 N NaOH solution. In addition, the sorption levels of ions such as Cu(II), Zn(II), and Ni(II) were also determined. The influence of the environment on the sorption process of this synthesized chelating sorbent with Cu(II) ions was observed. capacity is found to be high. The structure of the newly synthesized sorbent and the sorption of Zn (II) and Cu (II) ions in the solution with the help of the sorbent were studied, and the formation of complex compounds in the sorbent phase was based on the change of vibration frequencies according to the results of IR-spectrum analysis. proposed structure. The IR results confirmed that this sorbent contains OH groups, primary amides (attached melamine ring), and R-O-H group. The surface morphology of this sorbent was studied by SEM analysis. The Langmuir and Freundlich isotherms of the sorption process of the chelating sorbent for Cu (II) ions were studied and analyzed. The obtained results also confirmed that the possibility of using KF-DK as a sorbent for the sorption of d-metals from metallurgical wastewater was highlighted.
- Open Access
- 22 May 2024
- Published by CSIR-National Institute of Science Communication and Policy Research (NIScPR) in Indian Journal of Chemistry
- Vol. 63 (5) , 500-505
The Spectrophotometric Determination of Copper(II) Ion with 7-Bromo-2-Nitroso-1-Oxinaphthalene-3,6-Disulphocid
An organic analytical reagent reacts violently with Cu(II) ion, forming a blue water-soluble complex. A method of spectrophotometric detection of the complex formed by Cu(II) ion with 7-bromo-2-nitroso-1-oxynaphthalene-3,6-disulfoacid (BNOKS-S, S-3,6) (HR) reagent was developed. Optimal conditions were studied: λmax= 600, pH = 4.0, universal buffer, reagent buffer - Cu(II) - distilled water, BNOKS-S, S-3 with 0.05% relative to TCu2+=10 μg/25ml It was found that 1.4 ml volume of 6 reagents is sufficient. It was determined that the area of obedience to the Bouguer-Lambert-Behr law is 0.5-15 μg/25ml. Absorption spectra were studied: sensitivity according to Sendel was 0.00092 μg/cm2, contrast ∆λ = 110 nm. The composition of the complex and the mechanism of complex formation were studied using the Nazarenko method, the isomolar series method, Asmus' straight line method, and spectrophotometric titration methods. The molar ratio of the complex is Me:R = 1:2. Actual molar extinction coefficient (εreal = 58824), formation equilibrium constant (Kequilb= 15.23), stability constant of the complex using the Babko method (lgβ= 19.52), the confidence interval of the deviation from the mean value (∆X = 0.117) and the lower limit of detection (Qmin = 0.141 μg/25ml) were determined. The results of the graduated graph were mathematically processed using the method of small squares and a linear mathematical equation was developed: Yi = 1,1·10-3 + 2,4·10-2Xi. The effect of foreign ions was studied. The developed method was used in an artificial mixture.
- 22 May 2024
- Published by CSIR-National Institute of Science Communication and Policy Research (NIScPR) in Indian Journal of Chemistry
- Vol. 63 (5) , 500-505
Open AccessThe Spectrophotometric Determination of Copper(II) Ion with 7-Bromo-2-Nitroso-1-Oxinaphthalene-3,6-Disulphocid
An organic analytical reagent reacts violently with Cu(II) ion, forming a blue water-soluble complex. A method of spectrophotometric detection of the complex formed by Cu(II) ion with 7-bromo-2-nitroso-1-oxynaphthalene-3,6-disulfoacid (BNOKS-S, S-3,6) (HR) reagent was developed. Optimal conditions were studied: λmax= 600, pH = 4.0, universal buffer, reagent buffer - Cu(II) - distilled water, BNOKS-S, S-3 with 0.05% relative to TCu2+=10 μg/25ml It was found that 1.4 ml volume of 6 reagents is sufficient. It was determined that the area of obedience to the Bouguer-Lambert-Behr law is 0.5-15 μg/25ml. Absorption spectra were studied: sensitivity according to Sendel was 0.00092 μg/cm2, contrast ∆λ = 110 nm. The composition of the complex and the mechanism of complex formation were studied using the Nazarenko method, the isomolar series method, Asmus' straight line method, and spectrophotometric titration methods. The molar ratio of the complex is Me:R = 1:2. Actual molar extinction coefficient (εreal = 58824), formation equilibrium constant (Kequilb= 15.23), stability constant of the complex using the Babko method (lgβ= 19.52), the confidence interval of the deviation from the mean value (∆X = 0.117) and the lower limit of detection (Qmin = 0.141 μg/25ml) were determined. The results of the graduated graph were mathematically processed using the method of small squares and a linear mathematical equation was developed: Yi = 1,1·10-3 + 2,4·10-2Xi. The effect of foreign ions was studied. The developed method was used in an artificial mixture.