DADalal Alhashmialameer

Dalal Alhashmialameer

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Dalal Alhashmialameer has a total of 35 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Selective Novel Metal‐Coordinated Biomedical Agents Encompassing Tetradentate Salen Ligand: Structural Elucidation, DFT Calculation, Cytotoxic, and Antioxidant Activities Supported by Molecular Docking Approach

    by Khalaf Al‐Ghamdi, Mona M. A. Alharas, Samir A. Abdel‐Latif, Dalal Alhashmialameer, Eida S. Al‐Farraj, Manal A. Almalki, Rafat M. El‐Khatib, Ahmed M. Abu‐Dief

    Several physicochemical and analytical methods were employed to elucidate the structural analysis of some novel complexes derived from the {3,4‐bis‐[(3‐ethoxy‐2‐hydroxy‐benzylidene)‐amino]‐phenyl}‐phenyl‐methanone (ESAB ligand). Decomposition point determination, elemental analysis (CHN), spectroscopy (IR, NMR, and mass spectrometry), conductivity, magnetic susceptibility, UV–Vis spectrum study, and theoretical investigations were among these methods. With conductance values ranging from 7.5 to 15.12 Ω −1 cm 2 mol −1 , molar conductance values showed that the Zn (II), Cu (II), and Ru (III) complexes are nonelectrolytes in fresh DMSO solutions, with the exception of the ESABRu complex, which is a monoelectrolyte. According to IR spectra, the ligand uses the (N & O) donor sites from the (C=N & C‐O) groups in the ligand moiety to coordinate through the metal ions in a tetradentate form. A 1:1 (metal:ligand) molar ratio was proposed by Job's approach based on analytical data from solution complexation. According to the stability constant ( K f ) values, the complexes' stability order was found to be ESABRu > ESABCu > ESABZn. The pH profile showed that the complexes under study are stable throughout a broad pH range, usually between pH = 4 and pH = 10. The complexes' geometric structures and ligand coordination capabilities were inferred with the use of magnetic and electronic spectrum studies. The DFT method uses quantum chemical simulations to evaluate the electronic structures of the ligand under investigation and its complexes. The unbound ligand's B3LYP level, B3LYP/6/311G* degree, and the complexes' B3LYP/6/311G**/LANL2DZ functional categories were employed in the computations of the density function concept (DFT). The findings revealed the consistency between the experimental and DFT computations. Natural bond orbital (NBO) analysis was used to investigate bond strength between molecules' charge exchange, hyperconjugative connections, and molecular equilibrium. By computing the hyperpolarizability (β) and molecular polarizability (α) parameters, the ensuing nonlinear optical properties were investigated, leading to a number of surprising optical properties for the produced compounds. The antipathogenic activity of the generated materials was experimentally verified against a subset of gram (+) and gram (−) bacteria as well as some fungi using the agar well diffusion method. Additionally, hepatic cellular carcinomas, cells from colon and breast cancer, were utilized to test the cytotoxic activity of the ESAB ligand and its metal chelates. Furthermore, the examined compounds' ability to suppress the DPPH radical was examined. Additionally, simulations of molecular docking were performed to ascertain how the produced compounds attached to the specific protein binding sites.


  • Fabrication, Preparation, Physicochemical Characterization, and Theoretical Studies of Some Novel Schiff Base Ciprofloxacin Metal Complexes: DNA Interaction and Biomedical Applications

    by Dalal Alhashmialameer, Gehad G. Mohamed, Yasser Al‐Hawamy, Aly Abdou, Hassan A. H. Alshehri, Fatmah Alkhatib, Ahmed M. Abu‐Dief

    Novel compounds with pharmacological activity were synthesized from Pd(II), Fe(III), Cr(III), Ni(II), and Cu(II) ions with 1‐cyclopropyl‐6‐fluoro‐4‐(2‐hydroxy‐phenylimino)‐7‐piperazin‐1‐yl‐1,4‐dihydro‐quinoline‐3‐carboxylic acid (CFAP). The ligand's NH and OH groups allowed it to interact with the metals as a neutral tridentate. The investigated novel compounds were described using 1H and 13C NMR spectra, FT‐IR spectrums, TGA and UV–Vis (conductance of molecules), and CHN‐analysis. Additionally, the pH profile of the CFAP complexes indicated great stability, and the complexes' stability constant was discovered in the solution. To extract important properties for CFAP and its complexes, computational research was used, CFAPCu, CFAPCr, CFAPNi, and CFAPFe have octahedral geometry, while CFAPPd has square planar geometry. To investigate the molecular geometry, density functional theory calculations (DFT) were carried out. The molar ratio and continuous fluctuation data confirmed that the (M:L) ratio was (1:1). In vitro tests were conducted to evaluate Schiff base's antimicrobial action ligand and its metal chelates against fungal and bacterial infections. The findings showed that the antimicrobial efficacy is as follows: When CFAPPd is compared to fluconazol and ofloxacin as reference medications, it is the highly inhibitor complex. The novel CFAP ligand and its complexes were investigated for In vitro carcinogenic potential against Hep‐G2, MCF‐7, and HCT‐116 cell lines. As compared to the medication vinblastine, the results once again demonstrated that CFAPPd is the most active agent. Moreover, the complexes demnstrated strong reactivity in capturing free radicals when their antioxidant activity was investigated. Viscosity, spectral investigations, and gel electrophoreses were used to identify the interaction between metal chelates and DNA. Every examined compound is shown to be an enthusiastic DNA binder by viscosity and spectrophotometric titration investigations. The heightened hydrophobic and electrostatic interactions between aromatic rings could be the cause of this. Ultimately, these compounds could be regarded as promising bioactive substances.


  • Ultrasonic‐Driven Coordination Polymer Based on the Building Block [CuI (CN)4]3− and Heptane‐1,7‐diamine as a Luminescence Sensor and Efficient Catalyst for Pharmaceutical Wastewater Treatment

    by Dalia I. Saleh, Dalal Alhashmialameer, Samy F. Mahmoud, Safaa Eldin H. Etaiw

    The coordination polymer {[Cu6(CN)6]·HPD}n, CP1; (HPD = heptane‐1,7‐diamine) was prepared and characterized by single‐crystal and powder X‐ray diffraction, UV–Vis spectroscopy, electron microscopy (TEM and SEM), and elemental analyses. The copper atoms are coordinated by C ≡ N ligands, and both exhibit tetrahedral geometry. Cu1 and Cu2 create the pretty unique cluster structure of two quadruple [Cu2(μ3‐CN)2] units exhibiting coprophilic interaction. The building blocks [Cu3(CN)3]2 form fused distorted rectangular rings surrounded with the [Cu2(μ3‐CN)2] motifs exhibiting wide voids to accommodate the guest HPD. The structure of 1 indicates the formation of channels with dimensions 5.121–8.469 Ǻ which extend three‐dimensionally creating fused cavity morphology with different shapes. CP1 was utilized as an efficient sensor for selective quantitative estimation of metal ions (Co2+) and explosives (NB). Advanced oxidation process (AOP) was used as an efficient photocatalyst for the removal of the antibiotic meloxicam (MEL) utilizing AOP in the presence of H2O2 as an oxidant. Scavenge experiments, reusability of catalyst 1, and mechanism of oxidation were also discussed.

  • A comparative study for the efficiency of Pd (II) and Fe (III) complexes as efficient catalysts for synthesis of dihydro‐7H‐5‐thia‐hexaaza‐s‐indacen‐6‐one derivatives supported with DFT approach

    by Mahmoud Abd El Aleem Ali Ali El‐Remaily, Thomas Nady A. Eskander, Omar Elhady, Dalal Alhashmialameer, Mosa Alsehli, Moumen S. Kamel, Mehran Feizi‐Dehnayebi, Ahmed M. Abu‐Dief

    Two novel complexes were synthesized by the reaction of benzothiazol‐pyrimidin‐2‐ylidene ligand (BTP) with Pd (II) and Fe (III) ions. A variety of various spectral and analytical methods (infrared, 1H/NMR, 13C/NMR, electronic spectra, CHN analyses, mass spectra, thermogravimetric analysis, and magnetic susceptibility) were used to characterize the investigated BTP ligand and its complexes. Correlation of experimental results with density functional theory calculation proves that the geometry of BTP‐Fe complex is octahedral, whereas BTP‐Pd complex is square planner. The catalytic effectiveness of BTP complexes were tested for three‐component condensation process under moderate and environmentally friendly reaction conditions. Moreover, the effects of different Lewis acid, basic, and ionic liquid catalysts, as well as solvent and catalyst dose on the catalytic reaction were investigated. Both catalysts demonstrated strong catalytic capability in the carefully regulated ideal reaction circumstances. Heterogeneous catalyst BTP‐Pd exhibited superior catalytic performance compared to homogeneous catalyst BTP‐Fe. All products were obtained in high TOF (turnover frequency) numbers in the presence of these catalysts, which indicate the high efficiency of these catalysts in the synthesis of dihydro‐7H‐5‐thia‐hexaaza‐s‐indacen‐6‐one derivatives. Moreover, the two catalysts' recycling and reusability in reactions were also investigated. Heterogeneous BTP‐Pd catalyst could be reused up to seven times with high efficiency, but the homogeneous catalyst (BTP‐Fe) could only be recycled up to four times. Furthermore, the mechanism of catalytic reaction was suggested and supported by DFT calculation. The simplicity, safety, stability, use of commercially available catalysts, quick reaction times, and excellent yields make it promising for future industrial use.


  • Hydrothermally synthesized Nb -doped TiO2 nanosheets for efficient removal of methylene blue dye on photocatalytic performance

    by Dalal Alhashmialameer, Mohammad Shariq, Hanan A Althikrallah, Mm Al-Amari, Amal BaQais, AbdulAziz A Alayyafi, Ebtihal A Mergani, Ezdehar A Elghazali, Afaf I Elghazali, Bhupender Kumar, et al.

    In this work, Niobium-doped (1%, 3%, and 5%) titanium dioxide (Nb-TiO2) nanosheets were successfully formed via the hydrothermal route and further characterized using TEM, XRD, XPS and UV–vis absorption spectroscopy techniques. Phase purity and structural information of the prepared materials were analysed by XRD measurements. The band gap values ranged from 3.27 to 2.98 eV as Nb doping increased, leading to improved photocatalytic activity by creating new energy levels close to the conduction band. The XPS results confirm the amalgamation of Nb5+ ions into TiO2 without affecting the crystallinity, structure or orientation of the occurrence of oxygen vacancies. In 3% Nb-doped TiO2, the degradation efficiency for removing (Methylene blue) MB dye increased by ∼96% for the removal of MB dye within 70 min in comparison to pure and other doped TiO2 catalysts The better photocatalytic activity of 3% Nb-TiO2 is due to the longer time between electron–hole pairs before they recombine into one pair. Hydroxyl radicals (HO•) and superoxide radicals (O2 •−) are the primary reactive entities responsible for the deterioration of MB dye. Therefore, incorporating Nb into TiO2 nanostructures represents an auspicious material for the decomposition of hazardous and toxic pollutants in aquatic environments.


  • Fabrication, structural elucidation, and DFT calculation of some new hydrophilic metal chelates based onN N′‐(1‐methyl‐2‐oxoindolin‐3‐ylidene)benzohydrazide ligand: Pharmaceutical studies and molecular docking approach

    by Ahmed M. Abu‐Dief, Omran A. Omran, Mehran Feizi‐Dehnayebi, Abdulmajeed Alqurashi, Inam Omar, Dalal Alhashmialameer, Ahmad Desoky M. Mohamad

    Some novel FeIII, CuII, and PdIIchelates incorporating N′‐(1‐methyl‐2‐oxoindolin‐3‐ylidene)benzohydrazide (MIBA) were fabricated. The tested compounds were investigated using thermogravimetric analysis (TGA), CHN, spectra analysis (IR, mass spectra, and NMR), melting point, magnetic moments, molar conductance, ultraviolet–visible spectroscopy, powder X‐ray diffraction, and computational studies. The conductance results showed that the tested FeIII, CuII, and PdIIchelates are electrolytes. Magnetic and electronic spectra are applied to deduce the coordinating ability of the tested ligand, and the geometric structure of the studied chelates is found to be octahedral, distorted octahedral, and square planar for FeIII, CuII, and PdIIchelates, respectively. The TGA study of these studied complexes displays that the hydrated H2O molecules, acetate, and nitrate are removed in the first and second degradation steps followed directly by degradation of the studied ligand leaving metal oxide as residue. The thermodynamic factors, like ΔS*, ΔH*, E*, A, and ΔG* are evaluated from the TGA curves and explained. The density functional theory (DFT)/B3LYP computation method was applied for the estimation of the molecular electrostatic potential (MEP; highest occupied molecular orbital [HOMO] and lowest unoccupied molecular orbital [LUMO]) energy for the studied compounds. In an in vitro study, the antimicrobial effects of the prepared compounds were screened on various strains of bacteria and fungi. It was found that tested compounds exposed a good biological efficacy through IC50results close to reference drugs and antitumor potential against (MCF‐7, Hep‐G2, and HC‐T116) cell lines. The data obtained displayed that the studied chelates showed promising antitumor activity. The studied metal chelates were screened for in vitro antioxidant efficacy using DPPH assay. The studied compounds explained dynamic satisfying performance. Also, the crystal structures of breast cancer protein (PDB ID: 3HB5) andEscherichia coli(PDB ID: 2VF5) were performed by molecular docking simulation. Data of docking simulation suggestions are which tested compounds have biological behavior as well as have obvious benefit in the pharmaceutical business.