Abdelkader Hocine
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Abdelkader Hocine has a total of 39 co-authors. Here are the top co-authors by number of shared publications:
Abdelhakim Maizia
Laboratory Controls, Testing, Measurement and Mechanical Simulations, Hassiba Benbouali University of Chlef Algeria, Chlef, Algeria
5 shared publications- Abderrezak Bezazi
Laboratory of Applied Mechanics and New Materials (LMANM), University 08 May 1945, BN 401, Guelma 24000, Algeria
4 shared publications - Abdelhakim Maizia
Control, Testing, Measurement & Mechanical Simulation Laboratory, Faculty of Technology, Hassiba Benbouali University of Chlef, B.O. Box 151, Hay Salem, Chlef 02000, Algeria
3 shared publications Mohamed Houcine Dhaou
Department of Physics, College of Science, Qassim University, Buraydah, Almolaydah, Saudi Arabia
3 shared publications- Paulo Nobre Balbis Reis
Department of Mechanical Engineering University of Coimbra, CEMMPRE, ARISE Coimbra Portugal
3 shared publications Abdelhamid Ghouaoula
Laboratory of Control, Testing, Measurement and Mechanical Simulation, Hassiba Benbouali University of Chlef, Ouled Fares, Algeria
2 shared publications
Latest Publications
- Open Access
Failure Pressure of Corroded-Pipeline Prediction—Artificial-Intelligence Model with FEM and Experimental Data
This research work aims to implement empirical models for predicting the failure pressure of a pipeline corroded with a single defect and internal pressure applications. For this purpose, five approaches were used: two artificial intelligence (AI) models with experimental data, a finite-element model (FEM), and two analytical models (ASME B31G modified and DNV-RP-F101). The two proposed artificial models were implemented and optimized in order to find their best performance. The first AI method is an artificial neural network with multilayer perceptron (ANN-MLP), and the second is a support vector machine radial basis function (SVM-RBF). The comparison of the results of these two models proves the good precision of the ANN-MLP, with the correlation coefficient R = 0.9906 and R = 0.9888, ahead of the SVM-RBF with R = 0.9290 and R = 0.9260, respectively, for the two phases of training and testing. In addition, the output results of ANN-MLP are analyzed by William’s diagram; it was noted that 97.82% (180/184) of points belong to the field of validity and applicability of the artificial optimal model. In addition, the sensitivity analysis demonstrates a linear correlation between depth defect and the failure pressure with 32.77%, followed by the length of defect and the inner diameter with 20.04% and 19.81%, respectively. According to the present regression analysis, the results obtained from the ANN-MLP and finite-element method (FEM) are more accurate compared with SVM-RBF and other analytical models. However, the predicted failure pressure values demonstrated strong agreement across all the five approaches.
Open AccessFailure Pressure of Corroded-Pipeline Prediction—Artificial-Intelligence Model with FEM and Experimental Data
This research work aims to implement empirical models for predicting the failure pressure of a pipeline corroded with a single defect and internal pressure applications. For this purpose, five approaches were used: two artificial intelligence (AI) models with experimental data, a finite-element model (FEM), and two analytical models (ASME B31G modified and DNV-RP-F101). The two proposed artificial models were implemented and optimized in order to find their best performance. The first AI method is an artificial neural network with multilayer perceptron (ANN-MLP), and the second is a support vector machine radial basis function (SVM-RBF). The comparison of the results of these two models proves the good precision of the ANN-MLP, with the correlation coefficient R = 0.9906 and R = 0.9888, ahead of the SVM-RBF with R = 0.9290 and R = 0.9260, respectively, for the two phases of training and testing. In addition, the output results of ANN-MLP are analyzed by William’s diagram; it was noted that 97.82% (180/184) of points belong to the field of validity and applicability of the artificial optimal model. In addition, the sensitivity analysis demonstrates a linear correlation between depth defect and the failure pressure with 32.77%, followed by the length of defect and the inner diameter with 20.04% and 19.81%, respectively. According to the present regression analysis, the results obtained from the ANN-MLP and finite-element method (FEM) are more accurate compared with SVM-RBF and other analytical models. However, the predicted failure pressure values demonstrated strong agreement across all the five approaches.
- 26 July 2026
- Published by Wiley in Polymer Composites
- Vol. 47 (19) , 17637-17650
Matrix‐Dependent Multi‐Impact Behavior of Cylindrical Composite Tubes: A Comparative Study
This study evaluates the effect of resin type on the single‐ and multi‐impact behavior of cylindrical composite tubes. Two resin systems, epoxy and polyester, were tested, exhibiting distinct mechanical performance and cost. Under a 20 J single impact, E‐glass/epoxy tubes reached a peak load of 3.63 kN with a maximum displacement of 10.73 mm and an initial impact bending stiffness of 238 N/mm. E‐glass/polyester tubes, in contrast, reached 2.06 kN, 8.61 mm, and 91.8 N/mm, respectively, showing more ductile and distributed damage. In multi‐impact tests, fatigue life decreased with increasing impact energy. Epoxy composites sustained 26 impacts before perforation at 30 J, whereas polyester tubes required 24 J. Below 9 J (~200 cycles), polyester tubes outperformed epoxy, highlighting a trade‐off between performance and cost. The superior impact resistance of epoxy is linked to stronger fiber–matrix interfacial bonding and enhanced stiffness, while polyester offers economic advantages under lower‐energy conditions. These findings demonstrate that matrix selection critically governs energy absorption, damage tolerance, and impact fatigue performance in composite tubular structures, providing practical guidance for designing resilient and cost‐effective systems under repeated impacts.
- 26 July 2026
- Published by Wiley in Polymer Composites
- Vol. 47 (19) , 17637-17650
Matrix‐Dependent Multi‐Impact Behavior of Cylindrical Composite Tubes: A Comparative Study
This study evaluates the effect of resin type on the single‐ and multi‐impact behavior of cylindrical composite tubes. Two resin systems, epoxy and polyester, were tested, exhibiting distinct mechanical performance and cost. Under a 20 J single impact, E‐glass/epoxy tubes reached a peak load of 3.63 kN with a maximum displacement of 10.73 mm and an initial impact bending stiffness of 238 N/mm. E‐glass/polyester tubes, in contrast, reached 2.06 kN, 8.61 mm, and 91.8 N/mm, respectively, showing more ductile and distributed damage. In multi‐impact tests, fatigue life decreased with increasing impact energy. Epoxy composites sustained 26 impacts before perforation at 30 J, whereas polyester tubes required 24 J. Below 9 J (~200 cycles), polyester tubes outperformed epoxy, highlighting a trade‐off between performance and cost. The superior impact resistance of epoxy is linked to stronger fiber–matrix interfacial bonding and enhanced stiffness, while polyester offers economic advantages under lower‐energy conditions. These findings demonstrate that matrix selection critically governs energy absorption, damage tolerance, and impact fatigue performance in composite tubular structures, providing practical guidance for designing resilient and cost‐effective systems under repeated impacts.
- 28 January 2025
- Published by Springer Nature in International Journal on Interactive Design and Manufacturing (IJIDeM)
- Vol. 19 (9) , 6591-6611
Optimal design of the geometrical parameters of biocomposite wraps using in repairing of corroded pipeline under internal pressure: application for Algerian MEDGAZ
- 28 January 2025
- Published by Springer Nature in International Journal on Interactive Design and Manufacturing (IJIDeM)
- Vol. 19 (9) , 6591-6611
Optimal design of the geometrical parameters of biocomposite wraps using in repairing of corroded pipeline under internal pressure: application for Algerian MEDGAZ
- Open Access
The Condensation of Ideal Dunkl-Bose Gas in Power-Law Traps
We explore the phenomenon of Bose-Einstein condensation in two and one-dimensional Dunkl-boson gases confined within a power-law potential, employing the framework of Dunkl-deformed boson theory. Our investigation involves the calculation of particle numbers and phase transition temperatures using the Dunkl formalism. To assess the validity of our findings, we compare them with the corresponding results obtained from the standard approach. We find that the impact of the Dunkl-formalism on the condensate fractions is similar in one and two-dimensional cases. However, we see that this conclusion is not fully valid for the phase transition temperature.
Open AccessThe Condensation of Ideal Dunkl-Bose Gas in Power-Law Traps
We explore the phenomenon of Bose-Einstein condensation in two and one-dimensional Dunkl-boson gases confined within a power-law potential, employing the framework of Dunkl-deformed boson theory. Our investigation involves the calculation of particle numbers and phase transition temperatures using the Dunkl formalism. To assess the validity of our findings, we compare them with the corresponding results obtained from the standard approach. We find that the impact of the Dunkl-formalism on the condensate fractions is similar in one and two-dimensional cases. However, we see that this conclusion is not fully valid for the phase transition temperature.
- Open Access
- 26 July 2023
- Published by All Sciences Proceedings in All Sciences Abstracts
- Vol. 1 (4) , 10
Development, elaboration and characterization of composite tubes intended for hydrogen transport
Although hydrogen is one of the most abundant gases in the universe and having a major energy and ecological interest, at present it has not been sufficiently exploited, despite that it can be used in several sectors such as the production of electrical energy which is now the global challenge of the 21st century, or in the means of land, sea and air transport. By 2026, the global hydrogen market which is growing exponentially and it is expected to grow by 5000% according to Bank of America estimates and could even reach, by 2050, a size equivalent to that of oil today. This may be due to the commitment of more than 140 states to reduce their carbon footprint, the technological advances and the competition from various international investors in the hydrogen production. Between 5 and 10 USD/kg is the current price of green hydrogen, which is expected to decline by 2030 between 1.8 and 2.6 USD/kg and in 2050, according to forecasts, between 1.2 and 1.6 USD/kg according to specialists due to technological advances. This research focuses on the development, elaboration and characterization of composite tubes intended for the transport of hydrogen. The tubes produced, according to the stacking sequence [90/±55/90], were cut, in their transverse and longitudinal direction, into specimens according to the ASTM D6110-04 standard to be characterized in resilience (Charpy). The analysis of the obtained results indicates that the specimens impacted on their external faces, cut in the transverse direction, showed good impact resistance compared to those impacted on their internal and lateral faces. In addition, specimens cut in the longitudinal direction are characterized by very low impact resistance compared to those cut in the transverse one.
- 26 July 2023
- Published by All Sciences Proceedings in All Sciences Abstracts
- Vol. 1 (4) , 10
Open AccessDevelopment, elaboration and characterization of composite tubes intended for hydrogen transport
Although hydrogen is one of the most abundant gases in the universe and having a major energy and ecological interest, at present it has not been sufficiently exploited, despite that it can be used in several sectors such as the production of electrical energy which is now the global challenge of the 21st century, or in the means of land, sea and air transport. By 2026, the global hydrogen market which is growing exponentially and it is expected to grow by 5000% according to Bank of America estimates and could even reach, by 2050, a size equivalent to that of oil today. This may be due to the commitment of more than 140 states to reduce their carbon footprint, the technological advances and the competition from various international investors in the hydrogen production. Between 5 and 10 USD/kg is the current price of green hydrogen, which is expected to decline by 2030 between 1.8 and 2.6 USD/kg and in 2050, according to forecasts, between 1.2 and 1.6 USD/kg according to specialists due to technological advances. This research focuses on the development, elaboration and characterization of composite tubes intended for the transport of hydrogen. The tubes produced, according to the stacking sequence [90/±55/90], were cut, in their transverse and longitudinal direction, into specimens according to the ASTM D6110-04 standard to be characterized in resilience (Charpy). The analysis of the obtained results indicates that the specimens impacted on their external faces, cut in the transverse direction, showed good impact resistance compared to those impacted on their internal and lateral faces. In addition, specimens cut in the longitudinal direction are characterized by very low impact resistance compared to those cut in the transverse one.
- Open Access
- 26 July 2023
- Published by All Sciences Proceedings in All Sciences Abstracts
- Vol. 1 (4) , 9
Study of the resin type effect on composite specimens cut from elaborated tubes using filament winding technique subjected to bending loading
Carbon dioxide emissions due to fossil fuels cause environmental problems, global warming and climatic change, hence the need to replace them with renewable energy sources is necessary and among the solutions is the use of hydrogen. The difficulty in using hydrogen does not lie in its production but rather in securing its transport by canalization and storage in tanks because a simple leak will cause an explosion. At the present time, both industrials and researchers are trying to replace conventional pipes made of very heavy metallic steel, which have corrosion problems and costly maintenance, by pipes made of very light composites, having a long life time and low maintenance due to the fact that they are nonmetallic (i.e. do not have corrosion problems). The use of composite pipes contributes to the reduction of their cost prices and installation costs. In this perspective, the present study focuses on the design and manufacturing, by the filament winding technique, of composite tubes having the same type of twisted natural fiber but two types of polyester resins, supplied by two different manufacturers, have been used. Test specimens were cut from the elaborated composite tubes in their longitudinal direction according to the ASTM D790-17 standard and then tested in 3-point bending with a speed of 5 mm/min using a Walter & Bai tensile machine. It is important to note that the specimens were both on their concave faces and on the convex one. The obtained stress/displacement response curves allowed to determine the mechanical properties, namely the stress, the Young's modulus and the displacement at break. In addition, for both types of polyester resin, the resistances of the specimens tested on their external faces were higher than those tested on their internal ones.
- 26 July 2023
- Published by All Sciences Proceedings in All Sciences Abstracts
- Vol. 1 (4) , 9
Open AccessStudy of the resin type effect on composite specimens cut from elaborated tubes using filament winding technique subjected to bending loading
Carbon dioxide emissions due to fossil fuels cause environmental problems, global warming and climatic change, hence the need to replace them with renewable energy sources is necessary and among the solutions is the use of hydrogen. The difficulty in using hydrogen does not lie in its production but rather in securing its transport by canalization and storage in tanks because a simple leak will cause an explosion. At the present time, both industrials and researchers are trying to replace conventional pipes made of very heavy metallic steel, which have corrosion problems and costly maintenance, by pipes made of very light composites, having a long life time and low maintenance due to the fact that they are nonmetallic (i.e. do not have corrosion problems). The use of composite pipes contributes to the reduction of their cost prices and installation costs. In this perspective, the present study focuses on the design and manufacturing, by the filament winding technique, of composite tubes having the same type of twisted natural fiber but two types of polyester resins, supplied by two different manufacturers, have been used. Test specimens were cut from the elaborated composite tubes in their longitudinal direction according to the ASTM D790-17 standard and then tested in 3-point bending with a speed of 5 mm/min using a Walter & Bai tensile machine. It is important to note that the specimens were both on their concave faces and on the convex one. The obtained stress/displacement response curves allowed to determine the mechanical properties, namely the stress, the Young's modulus and the displacement at break. In addition, for both types of polyester resin, the resistances of the specimens tested on their external faces were higher than those tested on their internal ones.
- Open Access
Ideal Bose Gas and Blackbody Radiation in the Dunkl Formalism
Recently, deformed quantum systems gather lots of attention in the literature. Dunkl formalism differs from others by containing the difference-differential and reflection operator. It is one of the most interesting deformations since it let us discuss the solutions according to the even and odd solutions. In this work, we studied the ideal Bose gas and the blackbody radiation via the Dunkl formalism. To this end, we made a liaison between the coordinate and momentum operators with the creation and annihilation operators which allowed us to obtain the expressions of the partition function, the condensation temperature, and the ground state population of the Bose gas. We found that Dunkl-condensation temperature increases with increasing θ value. In the blackbody radiation phenomena, we found how the Dunkl formalism modifies total radiated energy. Then, we examined the thermal quantities of the system. We found that the Dunkl deformation causes an increase in entropy and specific heat functions as well as in the total radiation energy. However, we observed a decrease in the Dunk-corrected Helmholtz free energy in this scenario. Finally, we found that the equation of state is invariant even in the considered formalism.
Open AccessIdeal Bose Gas and Blackbody Radiation in the Dunkl Formalism
Recently, deformed quantum systems gather lots of attention in the literature. Dunkl formalism differs from others by containing the difference-differential and reflection operator. It is one of the most interesting deformations since it let us discuss the solutions according to the even and odd solutions. In this work, we studied the ideal Bose gas and the blackbody radiation via the Dunkl formalism. To this end, we made a liaison between the coordinate and momentum operators with the creation and annihilation operators which allowed us to obtain the expressions of the partition function, the condensation temperature, and the ground state population of the Bose gas. We found that Dunkl-condensation temperature increases with increasing θ value. In the blackbody radiation phenomena, we found how the Dunkl formalism modifies total radiated energy. Then, we examined the thermal quantities of the system. We found that the Dunkl deformation causes an increase in entropy and specific heat functions as well as in the total radiation energy. However, we observed a decrease in the Dunk-corrected Helmholtz free energy in this scenario. Finally, we found that the equation of state is invariant even in the considered formalism.
- Open Access
- 23 February 2022
- Published by MDPI AG in Journal of Composites Science
- Vol. 6 (3) , 69
Micromechanical Analysis of a Bio-Sandwich Application for Cylinder under Pressure
In recent years, there has been a growing replacement of synthetic fibers by natural ones, particularly by autochthonous materials. In the case of Algeria, the most abundant plant resources are the PALF (Pineapple leaf fiber), the date palm, and the Alfa fibers. In this work, the development and use of analytical and numerical methods are proposed to predict the mechanical properties of layers based on natural fibers that will be applied to manufacture skins of the sandwich cylinder. To achieve these predictions, four analytical models were used, namely the Halpin–Tsai, the Chamis, the Hashin vs. Rosen, and the ROM. The analytical results were compared with the numerical simulations and experimental data. The prediction of the elastic properties of the three fiber-based eco-composites showed an important dispersion in terms of stiffness.
- 23 February 2022
- Published by MDPI AG in Journal of Composites Science
- Vol. 6 (3) , 69
Open AccessMicromechanical Analysis of a Bio-Sandwich Application for Cylinder under Pressure
In recent years, there has been a growing replacement of synthetic fibers by natural ones, particularly by autochthonous materials. In the case of Algeria, the most abundant plant resources are the PALF (Pineapple leaf fiber), the date palm, and the Alfa fibers. In this work, the development and use of analytical and numerical methods are proposed to predict the mechanical properties of layers based on natural fibers that will be applied to manufacture skins of the sandwich cylinder. To achieve these predictions, four analytical models were used, namely the Halpin–Tsai, the Chamis, the Hashin vs. Rosen, and the ROM. The analytical results were compared with the numerical simulations and experimental data. The prediction of the elastic properties of the three fiber-based eco-composites showed an important dispersion in terms of stiffness.