THTengfei Huang

Tengfei Huang

*This is an algorithmically generated author record based on publicly available information.

Tengfei Huang has a total of 6 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Effect of blade profile on the hydraulic performance of a double-suction centrifugal pump as turbine based on enstrophy dissipation theory

    by Tao Wang, Lei Lei, Yunqi Liu, Qing Guo, Tengfei Huang

    Pump as turbine (PAT) is widely used in micro hydropower stations and chemical industries as an economical energy recovery device. The special impeller with forward-curved blades can significantly improve the efficiency of PAT and expand its high-efficiency range due to the suitable blade profile, which is more appropriate for PAT's operation mode than the backward-curved blades. To study the influence of the forward blade on a double-suction centrifugal PAT performance, three forward-curved blade schemes with different blade angle conditions are compared with the original backward-curved blade scheme. The three forward-curved blade schemes have the highest efficiency when the inlet angles are 60°, 90°, and 120°, respectively, and the appropriate blade outlet angle. The results showed that the forward-curved blade is suitable for high-flow rate operating conditions in double-suction centrifugal PAT. The PAT with a forward-curved blade impeller has higher efficiency and a broader high-efficiency region than the backward-curved blade impeller. The double-suction centrifugal PAT's main energy loss comes from the impeller's turbulent loss. The forward-curved blade reduces the impeller's turbulence loss and improves the PAT's efficiency at large flow rates. The research in this paper provides a theoretical basis for the design and application of double-suction centrifugal PAT.


  • Energy loss analysis of a double-suction centrifugal pump using in pump mode and turbine mode

    by Lei Lei, Tao Wang, Bo Qiu, Yunqi Liu, He Yu, Tengfei Huang

    As an economical energy recovery device, pump as turbine (PAT) is widely used in micro-hydropower stations and the chemical industry. The inlet and outlet pipelines connected to the double-suction pump are on the same horizontal line. As the pipeline layout is very convenient, in some chemical industries, the way of residual pressure energy utilization is increasing using the double-suction pump as a turbine. Based on numerical simulation, experimental verification, and entropy generation theory, the energy loss rule of each flow component in the pump mode and turbine mode under different flow rates is compared and analyzed. The results show that when the double-suction pump is used as a turbine, the flow rate at the best efficiency point (BEP) in the turbine mode shifts to a large flow rate by 30.89% and the BEP efficiency decreases by 1.30%. In the pump mode and turbine mode, the main energy loss component is the impeller, and the turbulent entropy generation power and the wall entropy generation power are the main sources of energy loss. The energy loss in the suction chamber and impeller increases sharply, and the energy loss is primarily enhanced in the blade trailing edge and the tongue near due to the unsteady flow in the turbine mode. Due to the complex structure, the spiral suction chamber is not suitable for the flow direction of the fluid flow out of the impeller, and the flow state inside the impeller is negatively affected by the suction chamber in the turbine mode. This paper provides a theoretical basis for the design and application of double-suction centrifugal PAT.