Gianpietro Imbrogno
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Gianpietro Imbrogno has a total of 53 co-authors. Here are the top co-authors by number of shared publications:
Rocco Dominici
14 shared publications- Adriano Guido
Department of Biology, Ecology and Earth Sciences, University of Calabria, 87036 Rende, Italy
8 shared publications - Antonietta Rosso
University of Catania, Catania, Italy
8 shared publications Antonio Lagudi
Department of Mechanical, Energy and Management Engineering, University of Calabria, 87036 Rende, Italy
8 shared publicationsCarmine Apollaro
Department of Biology, Ecology and Earth Sciences, University of Calabria, 87036 Rende, Italy
8 shared publications- Daniela Basso
Department of Earth and Environmental Sciences (DISAT), University of Milano-Bicocca, Milano, Piazza della Scienza 20126, Italy
8 shared publications
Latest Publications
- Open Access
- 21 September 2025
- Published by Elsevier in Journal of Hydrology
- Vol. 663
Modelling for conceptualisation and management of coastal plain aquifers under the risks of global change and deep thermal waters
- 21 September 2025
- Published by Elsevier in Journal of Hydrology
- Vol. 663
Open AccessModelling for conceptualisation and management of coastal plain aquifers under the risks of global change and deep thermal waters
- Open Access
- 15 September 2025
- Published by Copernicus GmbH in Ocean Science
- Vol. 21 (5) , 1967-1986
Mapping benthic marine habitats featuring coralligenous bioconstructions: a new approach to support geobiological research
Seabed mapping represents a very useful tool for seascape characterization and benthic habitat study and requires advanced technologies for acquiring, processing, and interpreting remote data. Particularly, acoustic instruments, such as high-resolution swath bathymetry sounders (i.e., multibeam echosounder: MBES), allow us to recognize, identify, and map the extension of benthic habitats without applying invasive mechanical procedures. Bathymetry and backscatter (BS) data are crucial to perform modern habitat mapping. Although the acquisition and processing of bathymetric data follow standardized procedure (e.g., Hydrographic Organization guidelines), and recent studies have proposed recommendations for backscatter acquisition and processing, a broadly validated methodological approach, integrating geomorphometric analysis for benthic habitat mapping, is still lacking. In this work, a new approach for benthic habitat mapping, with a focus on coralligenous bioconstructions, was developed using the open-source software QGIS. This methodology, tested within the Isola Capo Rizzuto Marine Protected Area (Calabria, Italy), is designed to be freely reproducible by researchers working in the field of marine ecosystem monitoring and conservation. Through the proposed mapping procedure, it is possible to (i) identify benthic habitats in selected study areas by combining bathymetry and BS data with geomorphological indices performed in QGIS and (ii) quantitatively define the 2D and 3D distribution of coralligenous bioconstructions in terms of surface covered, thickness, and volume. Moreover, the statistical analysis of quantitative morphometric data allowed for comparison of geometric characteristics of different coralligenous morphotypes. The obtained results, combined with improvement of minimally invasive sampling and geobiological–geochemical characterization, can contribute to the development of protocols aimed at monitoring marine bioconstructed ecosystems, many of which are protected by national and international regulations due to their importance for Mediterranean biodiversity preservation, and plan actions for their protection and persistence.
- 15 September 2025
- Published by Copernicus GmbH in Ocean Science
- Vol. 21 (5) , 1967-1986
Open AccessMapping benthic marine habitats featuring coralligenous bioconstructions: a new approach to support geobiological research
Seabed mapping represents a very useful tool for seascape characterization and benthic habitat study and requires advanced technologies for acquiring, processing, and interpreting remote data. Particularly, acoustic instruments, such as high-resolution swath bathymetry sounders (i.e., multibeam echosounder: MBES), allow us to recognize, identify, and map the extension of benthic habitats without applying invasive mechanical procedures. Bathymetry and backscatter (BS) data are crucial to perform modern habitat mapping. Although the acquisition and processing of bathymetric data follow standardized procedure (e.g., Hydrographic Organization guidelines), and recent studies have proposed recommendations for backscatter acquisition and processing, a broadly validated methodological approach, integrating geomorphometric analysis for benthic habitat mapping, is still lacking. In this work, a new approach for benthic habitat mapping, with a focus on coralligenous bioconstructions, was developed using the open-source software QGIS. This methodology, tested within the Isola Capo Rizzuto Marine Protected Area (Calabria, Italy), is designed to be freely reproducible by researchers working in the field of marine ecosystem monitoring and conservation. Through the proposed mapping procedure, it is possible to (i) identify benthic habitats in selected study areas by combining bathymetry and BS data with geomorphological indices performed in QGIS and (ii) quantitatively define the 2D and 3D distribution of coralligenous bioconstructions in terms of surface covered, thickness, and volume. Moreover, the statistical analysis of quantitative morphometric data allowed for comparison of geometric characteristics of different coralligenous morphotypes. The obtained results, combined with improvement of minimally invasive sampling and geobiological–geochemical characterization, can contribute to the development of protocols aimed at monitoring marine bioconstructed ecosystems, many of which are protected by national and international regulations due to their importance for Mediterranean biodiversity preservation, and plan actions for their protection and persistence.
- Open Access
- 12 June 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-26
Reply on RC2
Seabed mapping represents a very useful tool for seascape characterization and benthic habitat study, and requires advanced technologies for acquiring, processing and interpreting remote data. Particularly, acoustic instruments, such as high-resolution swath bathymetry sounder (i.e., Multibeam Echosounder: MBES), allows to recognize, identify and map the extension of benthic habitats without applying invasive mechanical procedures. Bathymetry and backscatter (BS) data are crucial to perform modern habitat mapping, however they require careful end-product development and, to date, no standardized procedure exists. In this work, a protocol for benthic habitat mapping, with focus on coralligenous bioconstructions, was developed using the open-source software QGIS. This protocol, tested within the Isola Capo Rizzuto Marine Protected Area (Calabria, Italy), is designed to be freely reproducible by researchers working in the field of marine ecosystem monitoring and conservation. Through the proposed mapping procedure, it is possible to: i) identify benthic habitats on selected study areas by combining bathymetry and BS data with geomorphological indices performed in QGIS; ii) quantitatively define the 2D and 3D distribution of coralligenous bioconstructions in terms of surface covered, thickness and volume. Moreover, the statistical analysis of quantitative morphometric data allowed for comparison of geometric characteristics of different coralligenous morphotypes. The obtained results, combined with improvement of minimally invasive sampling and geobiological–geochemical characterization, can contribute to the development of protocols aimed at monitoring marine bioconstructed ecosystems, many of which protected by national and international regulations due to their importance for Mediterranean biodiversity preservation, and plan actions for their protection and persistence.
- 12 June 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-26
Open AccessReply on RC2
Seabed mapping represents a very useful tool for seascape characterization and benthic habitat study, and requires advanced technologies for acquiring, processing and interpreting remote data. Particularly, acoustic instruments, such as high-resolution swath bathymetry sounder (i.e., Multibeam Echosounder: MBES), allows to recognize, identify and map the extension of benthic habitats without applying invasive mechanical procedures. Bathymetry and backscatter (BS) data are crucial to perform modern habitat mapping, however they require careful end-product development and, to date, no standardized procedure exists. In this work, a protocol for benthic habitat mapping, with focus on coralligenous bioconstructions, was developed using the open-source software QGIS. This protocol, tested within the Isola Capo Rizzuto Marine Protected Area (Calabria, Italy), is designed to be freely reproducible by researchers working in the field of marine ecosystem monitoring and conservation. Through the proposed mapping procedure, it is possible to: i) identify benthic habitats on selected study areas by combining bathymetry and BS data with geomorphological indices performed in QGIS; ii) quantitatively define the 2D and 3D distribution of coralligenous bioconstructions in terms of surface covered, thickness and volume. Moreover, the statistical analysis of quantitative morphometric data allowed for comparison of geometric characteristics of different coralligenous morphotypes. The obtained results, combined with improvement of minimally invasive sampling and geobiological–geochemical characterization, can contribute to the development of protocols aimed at monitoring marine bioconstructed ecosystems, many of which protected by national and international regulations due to their importance for Mediterranean biodiversity preservation, and plan actions for their protection and persistence.
- Open Access
- 12 June 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-26
Reply on RC1
Seabed mapping represents a very useful tool for seascape characterization and benthic habitat study, and requires advanced technologies for acquiring, processing and interpreting remote data. Particularly, acoustic instruments, such as high-resolution swath bathymetry sounder (i.e., Multibeam Echosounder: MBES), allows to recognize, identify and map the extension of benthic habitats without applying invasive mechanical procedures. Bathymetry and backscatter (BS) data are crucial to perform modern habitat mapping, however they require careful end-product development and, to date, no standardized procedure exists. In this work, a protocol for benthic habitat mapping, with focus on coralligenous bioconstructions, was developed using the open-source software QGIS. This protocol, tested within the Isola Capo Rizzuto Marine Protected Area (Calabria, Italy), is designed to be freely reproducible by researchers working in the field of marine ecosystem monitoring and conservation. Through the proposed mapping procedure, it is possible to: i) identify benthic habitats on selected study areas by combining bathymetry and BS data with geomorphological indices performed in QGIS; ii) quantitatively define the 2D and 3D distribution of coralligenous bioconstructions in terms of surface covered, thickness and volume. Moreover, the statistical analysis of quantitative morphometric data allowed for comparison of geometric characteristics of different coralligenous morphotypes. The obtained results, combined with improvement of minimally invasive sampling and geobiological–geochemical characterization, can contribute to the development of protocols aimed at monitoring marine bioconstructed ecosystems, many of which protected by national and international regulations due to their importance for Mediterranean biodiversity preservation, and plan actions for their protection and persistence.
- 12 June 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-26
Open AccessReply on RC1
Seabed mapping represents a very useful tool for seascape characterization and benthic habitat study, and requires advanced technologies for acquiring, processing and interpreting remote data. Particularly, acoustic instruments, such as high-resolution swath bathymetry sounder (i.e., Multibeam Echosounder: MBES), allows to recognize, identify and map the extension of benthic habitats without applying invasive mechanical procedures. Bathymetry and backscatter (BS) data are crucial to perform modern habitat mapping, however they require careful end-product development and, to date, no standardized procedure exists. In this work, a protocol for benthic habitat mapping, with focus on coralligenous bioconstructions, was developed using the open-source software QGIS. This protocol, tested within the Isola Capo Rizzuto Marine Protected Area (Calabria, Italy), is designed to be freely reproducible by researchers working in the field of marine ecosystem monitoring and conservation. Through the proposed mapping procedure, it is possible to: i) identify benthic habitats on selected study areas by combining bathymetry and BS data with geomorphological indices performed in QGIS; ii) quantitatively define the 2D and 3D distribution of coralligenous bioconstructions in terms of surface covered, thickness and volume. Moreover, the statistical analysis of quantitative morphometric data allowed for comparison of geometric characteristics of different coralligenous morphotypes. The obtained results, combined with improvement of minimally invasive sampling and geobiological–geochemical characterization, can contribute to the development of protocols aimed at monitoring marine bioconstructed ecosystems, many of which protected by national and international regulations due to their importance for Mediterranean biodiversity preservation, and plan actions for their protection and persistence.
- Open Access
- 9 June 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-26
Reply on RC2
Seabed mapping represents a very useful tool for seascape characterization and benthic habitat study, and requires advanced technologies for acquiring, processing and interpreting remote data. Particularly, acoustic instruments, such as high-resolution swath bathymetry sounder (i.e., Multibeam Echosounder: MBES), allows to recognize, identify and map the extension of benthic habitats without applying invasive mechanical procedures. Bathymetry and backscatter (BS) data are crucial to perform modern habitat mapping, however they require careful end-product development and, to date, no standardized procedure exists. In this work, a protocol for benthic habitat mapping, with focus on coralligenous bioconstructions, was developed using the open-source software QGIS. This protocol, tested within the Isola Capo Rizzuto Marine Protected Area (Calabria, Italy), is designed to be freely reproducible by researchers working in the field of marine ecosystem monitoring and conservation. Through the proposed mapping procedure, it is possible to: i) identify benthic habitats on selected study areas by combining bathymetry and BS data with geomorphological indices performed in QGIS; ii) quantitatively define the 2D and 3D distribution of coralligenous bioconstructions in terms of surface covered, thickness and volume. Moreover, the statistical analysis of quantitative morphometric data allowed for comparison of geometric characteristics of different coralligenous morphotypes. The obtained results, combined with improvement of minimally invasive sampling and geobiological–geochemical characterization, can contribute to the development of protocols aimed at monitoring marine bioconstructed ecosystems, many of which protected by national and international regulations due to their importance for Mediterranean biodiversity preservation, and plan actions for their protection and persistence.
- 9 June 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-26
Open AccessReply on RC2
Seabed mapping represents a very useful tool for seascape characterization and benthic habitat study, and requires advanced technologies for acquiring, processing and interpreting remote data. Particularly, acoustic instruments, such as high-resolution swath bathymetry sounder (i.e., Multibeam Echosounder: MBES), allows to recognize, identify and map the extension of benthic habitats without applying invasive mechanical procedures. Bathymetry and backscatter (BS) data are crucial to perform modern habitat mapping, however they require careful end-product development and, to date, no standardized procedure exists. In this work, a protocol for benthic habitat mapping, with focus on coralligenous bioconstructions, was developed using the open-source software QGIS. This protocol, tested within the Isola Capo Rizzuto Marine Protected Area (Calabria, Italy), is designed to be freely reproducible by researchers working in the field of marine ecosystem monitoring and conservation. Through the proposed mapping procedure, it is possible to: i) identify benthic habitats on selected study areas by combining bathymetry and BS data with geomorphological indices performed in QGIS; ii) quantitatively define the 2D and 3D distribution of coralligenous bioconstructions in terms of surface covered, thickness and volume. Moreover, the statistical analysis of quantitative morphometric data allowed for comparison of geometric characteristics of different coralligenous morphotypes. The obtained results, combined with improvement of minimally invasive sampling and geobiological–geochemical characterization, can contribute to the development of protocols aimed at monitoring marine bioconstructed ecosystems, many of which protected by national and international regulations due to their importance for Mediterranean biodiversity preservation, and plan actions for their protection and persistence.
- Open Access
- 30 May 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-26
Comment on egusphere-2025-1547
Seabed mapping represents a very useful tool for seascape characterization and benthic habitat study, and requires advanced technologies for acquiring, processing and interpreting remote data. Particularly, acoustic instruments, such as high-resolution swath bathymetry sounder (i.e., Multibeam Echosounder: MBES), allows to recognize, identify and map the extension of benthic habitats without applying invasive mechanical procedures. Bathymetry and backscatter (BS) data are crucial to perform modern habitat mapping, however they require careful end-product development and, to date, no standardized procedure exists. In this work, a protocol for benthic habitat mapping, with focus on coralligenous bioconstructions, was developed using the open-source software QGIS. This protocol, tested within the Isola Capo Rizzuto Marine Protected Area (Calabria, Italy), is designed to be freely reproducible by researchers working in the field of marine ecosystem monitoring and conservation. Through the proposed mapping procedure, it is possible to: i) identify benthic habitats on selected study areas by combining bathymetry and BS data with geomorphological indices performed in QGIS; ii) quantitatively define the 2D and 3D distribution of coralligenous bioconstructions in terms of surface covered, thickness and volume. Moreover, the statistical analysis of quantitative morphometric data allowed for comparison of geometric characteristics of different coralligenous morphotypes. The obtained results, combined with improvement of minimally invasive sampling and geobiological–geochemical characterization, can contribute to the development of protocols aimed at monitoring marine bioconstructed ecosystems, many of which protected by national and international regulations due to their importance for Mediterranean biodiversity preservation, and plan actions for their protection and persistence.
- 30 May 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-26
Open AccessComment on egusphere-2025-1547
Seabed mapping represents a very useful tool for seascape characterization and benthic habitat study, and requires advanced technologies for acquiring, processing and interpreting remote data. Particularly, acoustic instruments, such as high-resolution swath bathymetry sounder (i.e., Multibeam Echosounder: MBES), allows to recognize, identify and map the extension of benthic habitats without applying invasive mechanical procedures. Bathymetry and backscatter (BS) data are crucial to perform modern habitat mapping, however they require careful end-product development and, to date, no standardized procedure exists. In this work, a protocol for benthic habitat mapping, with focus on coralligenous bioconstructions, was developed using the open-source software QGIS. This protocol, tested within the Isola Capo Rizzuto Marine Protected Area (Calabria, Italy), is designed to be freely reproducible by researchers working in the field of marine ecosystem monitoring and conservation. Through the proposed mapping procedure, it is possible to: i) identify benthic habitats on selected study areas by combining bathymetry and BS data with geomorphological indices performed in QGIS; ii) quantitatively define the 2D and 3D distribution of coralligenous bioconstructions in terms of surface covered, thickness and volume. Moreover, the statistical analysis of quantitative morphometric data allowed for comparison of geometric characteristics of different coralligenous morphotypes. The obtained results, combined with improvement of minimally invasive sampling and geobiological–geochemical characterization, can contribute to the development of protocols aimed at monitoring marine bioconstructed ecosystems, many of which protected by national and international regulations due to their importance for Mediterranean biodiversity preservation, and plan actions for their protection and persistence.
- Open Access
- 30 May 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-26
Reply on RC1
Seabed mapping represents a very useful tool for seascape characterization and benthic habitat study, and requires advanced technologies for acquiring, processing and interpreting remote data. Particularly, acoustic instruments, such as high-resolution swath bathymetry sounder (i.e., Multibeam Echosounder: MBES), allows to recognize, identify and map the extension of benthic habitats without applying invasive mechanical procedures. Bathymetry and backscatter (BS) data are crucial to perform modern habitat mapping, however they require careful end-product development and, to date, no standardized procedure exists. In this work, a protocol for benthic habitat mapping, with focus on coralligenous bioconstructions, was developed using the open-source software QGIS. This protocol, tested within the Isola Capo Rizzuto Marine Protected Area (Calabria, Italy), is designed to be freely reproducible by researchers working in the field of marine ecosystem monitoring and conservation. Through the proposed mapping procedure, it is possible to: i) identify benthic habitats on selected study areas by combining bathymetry and BS data with geomorphological indices performed in QGIS; ii) quantitatively define the 2D and 3D distribution of coralligenous bioconstructions in terms of surface covered, thickness and volume. Moreover, the statistical analysis of quantitative morphometric data allowed for comparison of geometric characteristics of different coralligenous morphotypes. The obtained results, combined with improvement of minimally invasive sampling and geobiological–geochemical characterization, can contribute to the development of protocols aimed at monitoring marine bioconstructed ecosystems, many of which protected by national and international regulations due to their importance for Mediterranean biodiversity preservation, and plan actions for their protection and persistence.
- 30 May 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-26
Open AccessReply on RC1
Seabed mapping represents a very useful tool for seascape characterization and benthic habitat study, and requires advanced technologies for acquiring, processing and interpreting remote data. Particularly, acoustic instruments, such as high-resolution swath bathymetry sounder (i.e., Multibeam Echosounder: MBES), allows to recognize, identify and map the extension of benthic habitats without applying invasive mechanical procedures. Bathymetry and backscatter (BS) data are crucial to perform modern habitat mapping, however they require careful end-product development and, to date, no standardized procedure exists. In this work, a protocol for benthic habitat mapping, with focus on coralligenous bioconstructions, was developed using the open-source software QGIS. This protocol, tested within the Isola Capo Rizzuto Marine Protected Area (Calabria, Italy), is designed to be freely reproducible by researchers working in the field of marine ecosystem monitoring and conservation. Through the proposed mapping procedure, it is possible to: i) identify benthic habitats on selected study areas by combining bathymetry and BS data with geomorphological indices performed in QGIS; ii) quantitatively define the 2D and 3D distribution of coralligenous bioconstructions in terms of surface covered, thickness and volume. Moreover, the statistical analysis of quantitative morphometric data allowed for comparison of geometric characteristics of different coralligenous morphotypes. The obtained results, combined with improvement of minimally invasive sampling and geobiological–geochemical characterization, can contribute to the development of protocols aimed at monitoring marine bioconstructed ecosystems, many of which protected by national and international regulations due to their importance for Mediterranean biodiversity preservation, and plan actions for their protection and persistence.
- Open Access
- 21 May 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-26
Comment on egusphere-2025-1547
Seabed mapping represents a very useful tool for seascape characterization and benthic habitat study, and requires advanced technologies for acquiring, processing and interpreting remote data. Particularly, acoustic instruments, such as high-resolution swath bathymetry sounder (i.e., Multibeam Echosounder: MBES), allows to recognize, identify and map the extension of benthic habitats without applying invasive mechanical procedures. Bathymetry and backscatter (BS) data are crucial to perform modern habitat mapping, however they require careful end-product development and, to date, no standardized procedure exists. In this work, a protocol for benthic habitat mapping, with focus on coralligenous bioconstructions, was developed using the open-source software QGIS. This protocol, tested within the Isola Capo Rizzuto Marine Protected Area (Calabria, Italy), is designed to be freely reproducible by researchers working in the field of marine ecosystem monitoring and conservation. Through the proposed mapping procedure, it is possible to: i) identify benthic habitats on selected study areas by combining bathymetry and BS data with geomorphological indices performed in QGIS; ii) quantitatively define the 2D and 3D distribution of coralligenous bioconstructions in terms of surface covered, thickness and volume. Moreover, the statistical analysis of quantitative morphometric data allowed for comparison of geometric characteristics of different coralligenous morphotypes. The obtained results, combined with improvement of minimally invasive sampling and geobiological–geochemical characterization, can contribute to the development of protocols aimed at monitoring marine bioconstructed ecosystems, many of which protected by national and international regulations due to their importance for Mediterranean biodiversity preservation, and plan actions for their protection and persistence.
- 21 May 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-26
Open AccessComment on egusphere-2025-1547
Seabed mapping represents a very useful tool for seascape characterization and benthic habitat study, and requires advanced technologies for acquiring, processing and interpreting remote data. Particularly, acoustic instruments, such as high-resolution swath bathymetry sounder (i.e., Multibeam Echosounder: MBES), allows to recognize, identify and map the extension of benthic habitats without applying invasive mechanical procedures. Bathymetry and backscatter (BS) data are crucial to perform modern habitat mapping, however they require careful end-product development and, to date, no standardized procedure exists. In this work, a protocol for benthic habitat mapping, with focus on coralligenous bioconstructions, was developed using the open-source software QGIS. This protocol, tested within the Isola Capo Rizzuto Marine Protected Area (Calabria, Italy), is designed to be freely reproducible by researchers working in the field of marine ecosystem monitoring and conservation. Through the proposed mapping procedure, it is possible to: i) identify benthic habitats on selected study areas by combining bathymetry and BS data with geomorphological indices performed in QGIS; ii) quantitatively define the 2D and 3D distribution of coralligenous bioconstructions in terms of surface covered, thickness and volume. Moreover, the statistical analysis of quantitative morphometric data allowed for comparison of geometric characteristics of different coralligenous morphotypes. The obtained results, combined with improvement of minimally invasive sampling and geobiological–geochemical characterization, can contribute to the development of protocols aimed at monitoring marine bioconstructed ecosystems, many of which protected by national and international regulations due to their importance for Mediterranean biodiversity preservation, and plan actions for their protection and persistence.
- Open Access
- 16 April 2025
- Published by Copernicus GmbH in EGUsphere
- Vol. 2025, 1-26
Mapping benthic marine habitats: a new protocol functional to geobiological researches
Seabed mapping represents a very useful tool for seascape characterization and benthic habitat study, and requires advanced technologies for acquiring, processing and interpreting remote data. Particularly, acoustic instruments, such as high-resolution swath bathymetry sounder (i.e., Multibeam Echosounder: MBES), allows to recognize, identify and map the extension of benthic habitats without applying invasive mechanical procedures. Bathymetry and backscatter (BS) data are crucial to perform modern habitat mapping, however they require careful end-product development and, to date, no standardized procedure exists. In this work, a protocol for benthic habitat mapping, with focus on coralligenous bioconstructions, was developed using the open-source software QGIS. This protocol, tested within the Isola Capo Rizzuto Marine Protected Area (Calabria, Italy), is designed to be freely reproducible by researchers working in the field of marine ecosystem monitoring and conservation. Through the proposed mapping procedure, it is possible to: i) identify benthic habitats on selected study areas by combining bathymetry and BS data with geomorphological indices performed in QGIS; ii) quantitatively define the 2D and 3D distribution of coralligenous bioconstructions in terms of surface covered, thickness and volume. Moreover, the statistical analysis of quantitative morphometric data allowed for comparison of geometric characteristics of different coralligenous morphotypes. The obtained results, combined with improvement of minimally invasive sampling and geobiological–geochemical characterization, can contribute to the development of protocols aimed at monitoring marine bioconstructed ecosystems, many of which protected by national and international regulations due to their importance for Mediterranean biodiversity preservation, and plan actions for their protection and persistence.
- 16 April 2025
- Published by Copernicus GmbH in EGUsphere
- Vol. 2025, 1-26
Open AccessMapping benthic marine habitats: a new protocol functional to geobiological researches
Seabed mapping represents a very useful tool for seascape characterization and benthic habitat study, and requires advanced technologies for acquiring, processing and interpreting remote data. Particularly, acoustic instruments, such as high-resolution swath bathymetry sounder (i.e., Multibeam Echosounder: MBES), allows to recognize, identify and map the extension of benthic habitats without applying invasive mechanical procedures. Bathymetry and backscatter (BS) data are crucial to perform modern habitat mapping, however they require careful end-product development and, to date, no standardized procedure exists. In this work, a protocol for benthic habitat mapping, with focus on coralligenous bioconstructions, was developed using the open-source software QGIS. This protocol, tested within the Isola Capo Rizzuto Marine Protected Area (Calabria, Italy), is designed to be freely reproducible by researchers working in the field of marine ecosystem monitoring and conservation. Through the proposed mapping procedure, it is possible to: i) identify benthic habitats on selected study areas by combining bathymetry and BS data with geomorphological indices performed in QGIS; ii) quantitatively define the 2D and 3D distribution of coralligenous bioconstructions in terms of surface covered, thickness and volume. Moreover, the statistical analysis of quantitative morphometric data allowed for comparison of geometric characteristics of different coralligenous morphotypes. The obtained results, combined with improvement of minimally invasive sampling and geobiological–geochemical characterization, can contribute to the development of protocols aimed at monitoring marine bioconstructed ecosystems, many of which protected by national and international regulations due to their importance for Mediterranean biodiversity preservation, and plan actions for their protection and persistence.
- 1 March 2025
- Published by Societa Geologica Italiana in Rendiconti Online della Società Geologica Italiana
- Vol. 65, 2-7
Multispectral analysis of satellite images for the evaluation of the land cover parameter in the EPM model
The sedimentary balance at the watershed-coast-continuum scale is very important for the management of the fluvial and coastal areas. The EPM (Erosion Potential Model) is a semiquantitative model based on geological, geomorphological, climate, and land cover data that allows to evaluate the production, transport, and sedimentation within a catchment. In this work, we focused on the evaluation of the land cover parameter, by the multispectral satellite images analysis, to assess the impact on coastal and fluvial sedimentary balance. The analysis of these images was performed by supervised classification algorithms, which allow for mapping the main land-cover classes. The main results of the analysis evaluated in two different periods (2012 and 2022) highlighted: i) an increase in the wooded areas at the expense of the sowing and meadow areas due to the progressive abandonment of the rural settlements; ii) an increase in urbanized areas close to the coast. The preliminary results of our study show a clear dependence between the different factors: land cover changes and variation of sediment production. The dependence between these factors could represent an important cause of the erosional coastal processes active along the northern Tyrrhenian coast of the Calabri region.
- 1 March 2025
- Published by Societa Geologica Italiana in Rendiconti Online della Società Geologica Italiana
- Vol. 65, 2-7
Multispectral analysis of satellite images for the evaluation of the land cover parameter in the EPM model
The sedimentary balance at the watershed-coast-continuum scale is very important for the management of the fluvial and coastal areas. The EPM (Erosion Potential Model) is a semiquantitative model based on geological, geomorphological, climate, and land cover data that allows to evaluate the production, transport, and sedimentation within a catchment. In this work, we focused on the evaluation of the land cover parameter, by the multispectral satellite images analysis, to assess the impact on coastal and fluvial sedimentary balance. The analysis of these images was performed by supervised classification algorithms, which allow for mapping the main land-cover classes. The main results of the analysis evaluated in two different periods (2012 and 2022) highlighted: i) an increase in the wooded areas at the expense of the sowing and meadow areas due to the progressive abandonment of the rural settlements; ii) an increase in urbanized areas close to the coast. The preliminary results of our study show a clear dependence between the different factors: land cover changes and variation of sediment production. The dependence between these factors could represent an important cause of the erosional coastal processes active along the northern Tyrrhenian coast of the Calabri region.