Xiaohu Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Xiaohu Wang has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
- Jiani Wu
Shanghai Advanced Research Institute, Chinese Academy of Sciences, Shanghai 201204, China
3 shared publications - Jinfang Chen
Shanghai Advanced Research Institute, Chinese Academy of Sciences, Shanghai, China
3 shared publications - Shuai Xing
Shanghai Advanced Research Institute, Chinese Academy of Sciences, Shanghai 201204, China
3 shared publications - Xiaowei Wu
Zhangjiang Laboratory, Shanghai, China
3 shared publications - Xuhao He
Center for Transformative Science, ShanghaiTech University, Shanghai 201210, China
3 shared publications - Yue Zong
Shanghai Advanced Research Institute, Chinese Academy of Sciences, Shanghai 201204, China
3 shared publications
Latest Publications
- Open Access
Avoiding the Formation of Bubbles and Pits in Buffered Chemical Polishing for the Niobium Superconducting Cavity Through Adjusting the Acid Ratio
Buffered chemical polishing (BCP) is an important and widely used polishing technique for superconducting radio-frequency (SRF) cavities made of niobium. A common problem encountered during BCP is the formation of bubbles and W-shaped pits on the cavity surface, which may severely limit the RF performance. We report a method to address the problem of W-shaped pits through optimizing the BCP acid ratio. We systematically investigate the effect of the BCP acid ratio through sample and cavity BCP experiments and determine an optimal ratio for the three acids. The new BCP recipe with the optimal acid ratio is verified through the development of niobium cavities with several different shapes, which are shown to be free of pits and demonstrate excellent RF performance; notably, several 3.9 GHz nine-cell cavities present unprecedented accelerating gradients. Furthermore, the findings suggest a simple pit-free BCP recipe that does not require , using only HF and . The method proposed in this study is also appropriate for suppressing pit formation with other acid mixtures or when polishing other metal objects.Open AccessAvoiding the Formation of Bubbles and Pits in Buffered Chemical Polishing for the Niobium Superconducting Cavity Through Adjusting the Acid Ratio
Buffered chemical polishing (BCP) is an important and widely used polishing technique for superconducting radio-frequency (SRF) cavities made of niobium. A common problem encountered during BCP is the formation of bubbles and W-shaped pits on the cavity surface, which may severely limit the RF performance. We report a method to address the problem of W-shaped pits through optimizing the BCP acid ratio. We systematically investigate the effect of the BCP acid ratio through sample and cavity BCP experiments and determine an optimal ratio for the three acids. The new BCP recipe with the optimal acid ratio is verified through the development of niobium cavities with several different shapes, which are shown to be free of pits and demonstrate excellent RF performance; notably, several 3.9 GHz nine-cell cavities present unprecedented accelerating gradients. Furthermore, the findings suggest a simple pit-free BCP recipe that does not require , using only HF and . The method proposed in this study is also appropriate for suppressing pit formation with other acid mixtures or when polishing other metal objects. - Open Access
Mechanism of Pit Formation on Surface of Superconducting Niobium Cavities During Buffered Chemical Polishing
Superconducting radio-frequency niobium cavities processed using buffered chemical polishing (BCP) sometimes show typical W-shaped pits on their surface, which may greatly limit their performance. However, the causes of such pits and effective solutions are not fully understood. In this study, we reproduced the formation of W-shaped pits on the cavity surface through niobium sample BCP experiments, directly observed the sample surface’s evolution during the polishing process and the polished surface’s morphology, and analyzed the cause of W-shaped pits in detail: the formation and attachment of bubbles on the niobium surface during the BCP process. Then, we systematically investigated the effects of different process parameters on the bubbles and pits, including the acid ratio, temperature, and flow rate. We also investigated how the formation of bubbles and pits was affected by the Nb facing orientation and grain size. This study provides insights into the mechanisms by which bubbles and W-shaped pits are formed on niobium surfaces, and highlights possible directions for reducing pit defects in Nb cavities processed using BCP treatment.
Open AccessMechanism of Pit Formation on Surface of Superconducting Niobium Cavities During Buffered Chemical Polishing
Superconducting radio-frequency niobium cavities processed using buffered chemical polishing (BCP) sometimes show typical W-shaped pits on their surface, which may greatly limit their performance. However, the causes of such pits and effective solutions are not fully understood. In this study, we reproduced the formation of W-shaped pits on the cavity surface through niobium sample BCP experiments, directly observed the sample surface’s evolution during the polishing process and the polished surface’s morphology, and analyzed the cause of W-shaped pits in detail: the formation and attachment of bubbles on the niobium surface during the BCP process. Then, we systematically investigated the effects of different process parameters on the bubbles and pits, including the acid ratio, temperature, and flow rate. We also investigated how the formation of bubbles and pits was affected by the Nb facing orientation and grain size. This study provides insights into the mechanisms by which bubbles and W-shaped pits are formed on niobium surfaces, and highlights possible directions for reducing pit defects in Nb cavities processed using BCP treatment.
- Open Access
Investigation of Electropolishing for High-Gradient 1.3 GHz and 3.9 GHz Niobium Cavities
Electropolishing (EP) has become a standard procedure for treating the inner surfaces of superconducting radio-frequency (SRF) cavities composed of pure niobium. In this study, a new EP facility was employed for the surface treatment of both 1.3 GHz and 3.9 GHz single-cell cavities at the Wuxi Platform. The stable “cold EP” mode was successfully implemented on this newly designed EP facility. By integrating the cold EP process with a two-step baking approach, a maximum accelerating gradient exceeding 40 MV/m was achieved in 1.3 GHz single-cell cavities. Additionally, an update to this EP facility involved the design of a special cathode system for small-aperture structures, facilitating the cold EP process for 3.9 GHz single-cell cavities. Ultimately, a maximum accelerating gradient exceeding 25 MV/m was attained in the 3.9 GHz single-cell cavities after undergoing the cold EP treatment. The design and commissioning of the EP device, as well as the electropolishing and vertical test results of the single-cell cavities, will be detailed herein. These methods and experiences are also transferable to multi-cell cavities and elliptical cavities of other frequencies.
Open AccessInvestigation of Electropolishing for High-Gradient 1.3 GHz and 3.9 GHz Niobium Cavities
Electropolishing (EP) has become a standard procedure for treating the inner surfaces of superconducting radio-frequency (SRF) cavities composed of pure niobium. In this study, a new EP facility was employed for the surface treatment of both 1.3 GHz and 3.9 GHz single-cell cavities at the Wuxi Platform. The stable “cold EP” mode was successfully implemented on this newly designed EP facility. By integrating the cold EP process with a two-step baking approach, a maximum accelerating gradient exceeding 40 MV/m was achieved in 1.3 GHz single-cell cavities. Additionally, an update to this EP facility involved the design of a special cathode system for small-aperture structures, facilitating the cold EP process for 3.9 GHz single-cell cavities. Ultimately, a maximum accelerating gradient exceeding 25 MV/m was attained in the 3.9 GHz single-cell cavities after undergoing the cold EP treatment. The design and commissioning of the EP device, as well as the electropolishing and vertical test results of the single-cell cavities, will be detailed herein. These methods and experiences are also transferable to multi-cell cavities and elliptical cavities of other frequencies.