Amit Kumar
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Amit Kumar has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Mahesh Kumar
Indian Institute of Technology Jodhpur
7 shared publications - Arpita Biswas
Indian Institute of Technology Jodhpur
2 shared publications Ahmed S. Razeen
School of Electrical and Electronic Engineering, Nanyang Technological University, Cluny Road, Singapore
1 shared publicationAnkur Gupta
1 shared publication- Ankur Gupta
Indian Institute of Technology Jodhpur
1 shared publication - Ayan Chatterjee
Department of Materials Engineering, Indian Institute of Technology Jodhpur, 342030, India
1 shared publication
Latest Publications
- 1 September 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 26 (17) , 25441-25448
Real-Time Electrochemical Monitoring of Nitrate Using a CuNPs@rGO@AgNWs Nanocomposite Sensor
- 1 September 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 26 (17) , 25441-25448
Real-Time Electrochemical Monitoring of Nitrate Using a CuNPs@rGO@AgNWs Nanocomposite Sensor
- 1 August 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 26 (16) , 23615-23622
Synergistic Enhancement of Uric Acid Sensing Using an Au-SnO₂ Nanoparticle-Decorated β -In₂S₃ Flakes Chemiresistor
- 1 August 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 26 (16) , 23615-23622
Synergistic Enhancement of Uric Acid Sensing Using an Au-SnO₂ Nanoparticle-Decorated β -In₂S₃ Flakes Chemiresistor
- 2 March 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 128 (9)
Spinel CuGa2O4-based memristor enabling synaptic plasticity and associative learning for next-generation memory devices
As conventional memory technologies face limitations in scalability, volatility, and energy efficiency, resistive random-access memory (RRAM) has emerged as a promising candidate for next-generation memory and neuromorphic computing. Among various oxide materials, copper oxide (CuO) has been studied for RRAM applications due to its simple binary structure, ease of synthesis, and inherent defect-mediated switching behavior. However, despite these advantages, CuO-based devices often suffer from limited endurance and poor retention. To overcome these drawbacks, we explore CuGa2O4, a complex spinel oxide, as a more stable and tunable alternative. The multinary composition and the spinel structure of CuGa2O4 offer enhanced control over defect chemistry and switching dynamics, leading to improved reliability and multifunctionality. The device demonstrates analog switching characteristics, including transition from short to long-term plasticity under repeated stimulation, mimicking biological synapses. Furthermore, associative learning behavior, reminiscent of the Pavlovian conditioning model, is observed, demonstrating the device's potential in neuromorphic systems.
- 2 March 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 128 (9)
Spinel CuGa2O4-based memristor enabling synaptic plasticity and associative learning for next-generation memory devices
As conventional memory technologies face limitations in scalability, volatility, and energy efficiency, resistive random-access memory (RRAM) has emerged as a promising candidate for next-generation memory and neuromorphic computing. Among various oxide materials, copper oxide (CuO) has been studied for RRAM applications due to its simple binary structure, ease of synthesis, and inherent defect-mediated switching behavior. However, despite these advantages, CuO-based devices often suffer from limited endurance and poor retention. To overcome these drawbacks, we explore CuGa2O4, a complex spinel oxide, as a more stable and tunable alternative. The multinary composition and the spinel structure of CuGa2O4 offer enhanced control over defect chemistry and switching dynamics, leading to improved reliability and multifunctionality. The device demonstrates analog switching characteristics, including transition from short to long-term plasticity under repeated stimulation, mimicking biological synapses. Furthermore, associative learning behavior, reminiscent of the Pavlovian conditioning model, is observed, demonstrating the device's potential in neuromorphic systems.
- 16 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 25 (15) , 27974-27980
Bimetallic Nanoparticle-Anchored CVD-Grown SnS₂ Flake-Based Chemiresistive Ascorbic Acid Sensor
Ascorbic acid (AA) is crucial in metabolic activities, serving as a scavenger to avert oxidative damage. Consequently, there is an imperative requirement for a highly sensitive, selective, and cost-effective sensing platform for the detection of AA. We introduced a useful method for detecting AA using SnS2 anchored with gold-silver (Au-Ag) nanoparticles (NPs). These bimetallic nanoparticles usually have better catalytic abilities than single-metal ones. Here we grow SnS2 flakes utilizing a simple - chemical vapor deposition (CVD) method to address the growing demand for a reliable detecting platform. To optimize device properties, we deposited Au/Cr contacts using shadow mask on the SnS2 flakes and subsequently passivated them with Si3N4 to avert electrical shorting. The sensors resistance was measured in the absence and presence of AA, while selectivity was analysed for various biomolecules, revealing a high selectivity for AA. The Au-Ag-SnS2-based device exhibited a response of 129.7% to 1 mM of AA biomolecules, surpassing all other devices and demonstrating almost double increase in sensing response compared to the pristine SnS2 device. The outcomes of this work illustrate the effectiveness of Au and Ag NPs anchored SnS2 as a desirable material for AA detection. This discovery advances our ability to monitor and identify AA, promoting progress in biomedical, industrial, and environmental applications.
- 16 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 25 (15) , 27974-27980
Bimetallic Nanoparticle-Anchored CVD-Grown SnS₂ Flake-Based Chemiresistive Ascorbic Acid Sensor
Ascorbic acid (AA) is crucial in metabolic activities, serving as a scavenger to avert oxidative damage. Consequently, there is an imperative requirement for a highly sensitive, selective, and cost-effective sensing platform for the detection of AA. We introduced a useful method for detecting AA using SnS2 anchored with gold-silver (Au-Ag) nanoparticles (NPs). These bimetallic nanoparticles usually have better catalytic abilities than single-metal ones. Here we grow SnS2 flakes utilizing a simple - chemical vapor deposition (CVD) method to address the growing demand for a reliable detecting platform. To optimize device properties, we deposited Au/Cr contacts using shadow mask on the SnS2 flakes and subsequently passivated them with Si3N4 to avert electrical shorting. The sensors resistance was measured in the absence and presence of AA, while selectivity was analysed for various biomolecules, revealing a high selectivity for AA. The Au-Ag-SnS2-based device exhibited a response of 129.7% to 1 mM of AA biomolecules, surpassing all other devices and demonstrating almost double increase in sensing response compared to the pristine SnS2 device. The outcomes of this work illustrate the effectiveness of Au and Ag NPs anchored SnS2 as a desirable material for AA detection. This discovery advances our ability to monitor and identify AA, promoting progress in biomedical, industrial, and environmental applications.
- 27 February 2025
- Published by Elsevier in Sensors and Actuators B: Chemical
- Vol. 433
Spillover effect in Pd anchored NiO-ZnO nanostructures improves hydrogen gas sensor’s performance
- 27 February 2025
- Published by Elsevier in Sensors and Actuators B: Chemical
- Vol. 433
Spillover effect in Pd anchored NiO-ZnO nanostructures improves hydrogen gas sensor’s performance
- 4 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 24 (24) , 40409-40416
Pd/AlGaN/GaN HEMT-Based Room Temperature Hydrogen Gas Sensor
There is a burgeoning need for miniaturized sensors to detect H 2 leaks throughout the entire value chain while envisioning a hydrogen economy. Developing a user-centric approach for manufacturing H 2 sensors exhibiting high performance, long-term stability, and ease in data communication still poses a significant challenge. With this objective in mind, we develop a Pd/AlGaN/GaN High Electron Mobility Transistor (HEMT)-based IoT-enabled H 2 sensing device capable of detecting extremely low concentrations (~0.5 ppm) at room temperature. The fabrication process of the device involves a photolithography technique for its fabrication and functionalization of the active area between the drain and source by Pd nanoparticles using the DC sputtering method. Afterward, Pd nanoparticles were functionalized onto the HEMT surface and sputtering times were also optimized. The sensor demonstrated shallow time parameters, with a recovery time of 52 s and a response time of 29 s for 10 ppm H 2 at room temperature (RT) respectively, with an exceptionally low detection limit of 0.5 ppm. Selectivity of the fabricated sensor was also investigated. Sensitivity towards NO 2 , CO 2 , H 2 S, NH 3 and SO 2 was approximately 1.5%, 4%, 2%, 3%, and 6.5%, respectively, compared to ~ 33% for H 2 . Furthermore, the sensor displayed marvelous replicability, working in a highly humid environment with operating in temperature range of 20 to 75°C. The sensor was incorporated into a prototype featuring a wireless capable Nano ESP32 IoT platform for real-time conditions. The reported proof of concept on room temperature H 2 sensor with enhanced characteristics can be envisioned for further technology demonstration.
- 4 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 24 (24) , 40409-40416
Pd/AlGaN/GaN HEMT-Based Room Temperature Hydrogen Gas Sensor
There is a burgeoning need for miniaturized sensors to detect H 2 leaks throughout the entire value chain while envisioning a hydrogen economy. Developing a user-centric approach for manufacturing H 2 sensors exhibiting high performance, long-term stability, and ease in data communication still poses a significant challenge. With this objective in mind, we develop a Pd/AlGaN/GaN High Electron Mobility Transistor (HEMT)-based IoT-enabled H 2 sensing device capable of detecting extremely low concentrations (~0.5 ppm) at room temperature. The fabrication process of the device involves a photolithography technique for its fabrication and functionalization of the active area between the drain and source by Pd nanoparticles using the DC sputtering method. Afterward, Pd nanoparticles were functionalized onto the HEMT surface and sputtering times were also optimized. The sensor demonstrated shallow time parameters, with a recovery time of 52 s and a response time of 29 s for 10 ppm H 2 at room temperature (RT) respectively, with an exceptionally low detection limit of 0.5 ppm. Selectivity of the fabricated sensor was also investigated. Sensitivity towards NO 2 , CO 2 , H 2 S, NH 3 and SO 2 was approximately 1.5%, 4%, 2%, 3%, and 6.5%, respectively, compared to ~ 33% for H 2 . Furthermore, the sensor displayed marvelous replicability, working in a highly humid environment with operating in temperature range of 20 to 75°C. The sensor was incorporated into a prototype featuring a wireless capable Nano ESP32 IoT platform for real-time conditions. The reported proof of concept on room temperature H 2 sensor with enhanced characteristics can be envisioned for further technology demonstration.
- 8 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 24 (12) , 18835-18843
Effect of Noble Metal on CuO/SnO2 Heterostructures Thin Films for H2S Gas
H 2 S is recognized as a toxic gas, renowned for its capacity to inflict significant harm upon the respiratory and nervous systems. Consequently, the development of high-performance H 2 S sensors holds significant importance. However, traditional fabrication methods such as brush painting and drop casting often yield sensors with inconsistent batch responses due to the unpredictable film formation process, hindering their mass industrial production. Here, we have devised a novel approach to fabricate highly sensitive and selective H 2 S sensors utilizing Pd-anchored CuO/SnO 2 heterostructures thin films. An investigation was conducted to analyze the impact of different noble metals (Pt, Au, Ag, and Pd) on CuO/SnO 2 heterostructure thin films concerning their response to H 2 S. These films were synthesized through RF sputtering and subsequently decorated with varying durations of CuO (15, 30, 45, 60, and 75 s) and Pd nanoparticles (3, 6, 9, and 12 s) using a sputtering process. Notably, a sputtering time of 60 s for CuO and 9 seconds for Pd significantly enhanced the H 2 S sensing performance and selectivity over other gases. The Pd-anchored CuO/SnO 2 thin films revealed an exceptional result of 75.45% to 100 ppm H 2 S, demonstrating a detection capability down to 0.5 ppm. These noteworthy outcomes were attained under optimal operating conditions at a temperature of 150 °C. This innovative fabrication technique holds promise for the advancement of gas sensor technology, enabling the creation of portable sensor prototypes suitable for real-time sensing applications.
- 8 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 24 (12) , 18835-18843
Effect of Noble Metal on CuO/SnO2 Heterostructures Thin Films for H2S Gas
H 2 S is recognized as a toxic gas, renowned for its capacity to inflict significant harm upon the respiratory and nervous systems. Consequently, the development of high-performance H 2 S sensors holds significant importance. However, traditional fabrication methods such as brush painting and drop casting often yield sensors with inconsistent batch responses due to the unpredictable film formation process, hindering their mass industrial production. Here, we have devised a novel approach to fabricate highly sensitive and selective H 2 S sensors utilizing Pd-anchored CuO/SnO 2 heterostructures thin films. An investigation was conducted to analyze the impact of different noble metals (Pt, Au, Ag, and Pd) on CuO/SnO 2 heterostructure thin films concerning their response to H 2 S. These films were synthesized through RF sputtering and subsequently decorated with varying durations of CuO (15, 30, 45, 60, and 75 s) and Pd nanoparticles (3, 6, 9, and 12 s) using a sputtering process. Notably, a sputtering time of 60 s for CuO and 9 seconds for Pd significantly enhanced the H 2 S sensing performance and selectivity over other gases. The Pd-anchored CuO/SnO 2 thin films revealed an exceptional result of 75.45% to 100 ppm H 2 S, demonstrating a detection capability down to 0.5 ppm. These noteworthy outcomes were attained under optimal operating conditions at a temperature of 150 °C. This innovative fabrication technique holds promise for the advancement of gas sensor technology, enabling the creation of portable sensor prototypes suitable for real-time sensing applications.